Unable to create a subsite based on the generic template - save site as a template

hi,
am using a  save site as a template functionality to create a sub site. when i select the custom template, and click on ok button,am  getting server error in appln.
in the site template i have
1) 2 document libraries with permissions broken[ stop inheritance]
2) 4  Groups created L1, L2,L3,L4
am stuck with ,  how to proceed/  create a  subsite based on the  template  site
note i have uploaded the  wsp file in the new site collection and activated it . ma getting the custom site template name in the tab.
would like to get clarification  about the  custom permissions:
if i break the permissions on the document libraries, will this sec.permissions be intact, [ not changed] as the orginal ? i mean if i broke the permissions, in the newly created subsite also, will the permissions be broken? i need this broken functionality
as per my requirement.
help is  highly appreciated!
Das

hi,
 am not bale to get the correlation id. am getting server error in application. yellow page error!!
and regarding the permissions i have checked this blog
http://sergeluca.wordpress.com/2011/06/02/sharepoint-2010-save-as-template-what-is-saved-what-is-not-saved/
Serge says that, if i am not wrong,
we cant perform stop inherit the permissions  for the doc lib and create a  sub site based on this site template.
also if i  stop inheriting from site permissions  also.
can anyone from MSFT, pls confirm this. or any msd doc says about this.
Das

Similar Messages

  • Is there a way to create a collection based on the "previous import"?

    is there a way to create a collection based on the "previous import"? that would make it easy to mobile sync the last import to my ipad, and do further picking/rejecting while away from my laptop.

    well, yes, of course i could do it that way. i guess i wasn't specific enough. is there a way to create a smart collection, with the photos in the "previous import" as members of the smart collection.  earlier i mentioned about using this smart collection to mobile sync with my ipad, to do further flagging.
    so my intention, use a smart collection to mobile sync with my ipad, and the smart collection to include the photos from my previous import.
    i guess another way to ask the question, is there a way to create a smart collection, by using some rule or condition in the smart collection, to automatically include previous import photos.
    the documentation says that "previous import" is a collection, even though it shows up in the catalogue side bar section. but i see no way to choose that collection when making a smart collection.
    jd

  • How to create a record based on the name of a file in the file-system?

    Hi,
    With a lot of pictures I want to have a database to gather some information about these pictures.
    First question is how to generate a record based on a file in the file system?
    e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
    now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
    any suggestions?
    any reaction will be appreciated.
    Leo

    Link to Create directory
    http://www.adp-gmbh.ch/ora/sql/create_directory.html
    You can create a list of files in the directory and read the list files from that directory.
    [UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
    [Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
    SS

  • Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

    Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

    The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
    That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
    Ernie

  • How to create activity workflow based on the Web API 2 services

    Hi,
    We have Web API 2 services and we want create activity workflow based on the Web API 2 services.
    Web API 2 services provide some application operations and based on this operations we would like to create custom activity workflow.
    Question:
    Is that possible?
    Could you please give best practices to create activity workflow based on the Web API 2 services ?
    Thanks for your support.

    HI Max_P,
    Welcome to workflow forum.
    ASP.NET Web API is a framework that makes it easy to build HTTP services that reach a broad range of clients, including browsers and mobile devices. ASP.NET Web API is an ideal platform for building RESTful applications on the .NET Framework.
    I researched relevant topic about creating workflow application using Web API 2, I just found these resources about it.
    Learn About ASP.NET Web API
    Hope it helps.
    Best regards,
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can we create graphic and text in the same window of smartform without using template?

    we create graphic and text in the same window of smartform without using template?

    Hi Kinjal,
    as far as i understand you are talking about a template which you can partitioned and in one part you wants to show your graphics and in other part you wants to print your text, the border of template shall remain invisible.
    If you wants to do it without using a template, you can do it as sujjested by Susmitha, but creating a template will provide you more flexibility that if you wants to change the attributes in future you can do it easily.

  • Given the the user the right to save site template

    Hello,
    how can i give a user the right so save a site as site template. Being in the "Site Owners" group didn#t seem to be enough to do that.
    Like written in the manual: https://support2.microsoft.com/kb/2420856?wa=wsignin1.0
    the menu entry "Save site as template" just don't exist for all "Site Owners" users.
    Thank you.

    Hi Mafrei,
    Thanks for posting your query, Saving a site as a template creates a Site Template.
    Creating a web template in Visual Studio using the new WebTemplate feature creates a Web Template.
    When the Publishing features (web or site collection scoped) are activated it is not supported to save your site as a template. If you do want to save your site as a template using the SharePoint user interface you should not activate the publishing features.
    If you do need to activate the publishing features you should create web templates using Visual Studio instead of saving your site as a template through the user interface.
    I hope this is helpful to you. If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog: http://sharepoint-community.net/profile/DharmendraSingh

  • Creating Outbound deliveries based on the sales order schedule lines

    Dear all.
    Is it possible to create outbound delivery documents based on the sales order schedule lines?
    Eg:
    Let's say I have sales order line item 10 with below mentioned requested delivery dates in its schedule line level.
    30.07.2009
    10.08.2009
    20.08.2009
    30.08.2009
    Will it possible for me to create different deliveries for those 4 schedule lines individually? I should be able to create 10.08.2009 delivery without clubbing 30.07.2009 delivery with it.
    Appreciate your help!

    I'm not sure because I'm not before SAP but try transaction VL10E that is to create delivery for schedule lines. I'm not sure what are the split criterias.
    Please check OSS note 113411 tha has many OSS note reference in this subject.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jul 29, 2009 2:38 PM

  • Unable to create a pdf file using the print routine

    Hey all,
    Recently, i've been unable to create a pdf using the print routine from quickbooks, word, outlook, etc... using the print routine and the adobe pdf driver....
    I have vista and cs3... Any thoughts?
    Thanks,
    Murph
    [email address deleted by host]

    If you are trying to print to the Adobe PDF printer and that fails, try using print-to-file. Then open the file in Distiller. If the result is the desired PDF, then check for AcroTray running as a background application. Sometimes it has to be restarted, but should be in your startup (you can check msconfig from the start>run menu to see if AcroTray is there).

  • How to create a diagram based on the query?

    Hi All,
    I want to create a diagram which will show a structure based on the data in the tables.
    For example:-
    if in a table, we have on two columns,
    one have unique breed of animal and other columns have sub-breeds under that breed. it is one to many mapping.
    in some other table,we have on two columns,
    one have unique sub-breed of animal and other columns have again sub-breeds under that breed. it is one to many mapping.
    i want to display the diagram as shown at the following url:- http://www.signosemio.com/a_analyse-par-classement.asp (diagram:- The naïve ontological classes)
    At the place of Boxes, i will show images.
    but i am not able to generate this diagram.
    please help.

    I am afraid, the Google Visualization plugin (which is used internally by that apex plugin) does not support multiple parents.
    The documentation page says the following
    Each node can have zero or one parent node, and zero or more child nodes.I tried adding an extra row for a child with an additional parent, but it removed the old parent association for that record in the chart
    You might have to some other plugin which supports that or find an JS/jQuery plugin that renders as per your requirement and then write the code yourself to pass the data to JS function from the page.

  • How to create a shape based on the shape of an image

    I want to erase a portion of a mask based on the shape of an image. how can i do this? btw how to create a circle? thx

    Both your questions leave room for imagining what you might really mean, but here's a shot at answering them.
    If you have a mask that you want to erase portions of based on an image... assuming the mask is a simple rectangle you drew with the rectangle tool, change the opacity of the rectangle's fill in the color panel to make it see-thru, place the mask over the image, and using the eraser tool, erase the portions of the mask that you do not intend to retain using the image below it as a guide.
    As for drawing a circle, hover over the rectangle tool and a menu should appear.  Select the oval/ellipse tool.  To draw a circle, hold down the shift key and draw just as you did for the rectangle.  The shift key forces it to retain equal width and height.

  • How to create a report based on the selection of a node of a tree

    Hello,
    I am new to Oracle Apex and I was trying to build a tree and also an interactive report based on the empno column of the emp table.
    I have created a tree based on emp table. Now I want to display records of the employee selected in the tree.
    Here is the tree query:
    select case when connect_by_isleaf = 1 then 0
    when level = 1 then 1
    else -1
    end as status,
    level,
    "ENAME" as title,
    null as icon,
    "EMPNO" as value,
    null as tooltip,
    null as link
    from "#OWNER#"."EMP"
    start with "MGR" is null
    connect by prior "EMPNO" = "MGR"
    order siblings by "ENAME"
    Can anyone tell me step by step how to go from here?
    I tried to follow the thread Re: tree question but could not understand much from it.

    The approach for reloading the page and displaying the report is quite simple.
    <li>You start by creating a new page item which would be used to store the selected node ID , eg. P100_SELECTED_NODE (you can make it atext item and change it hidden once everything works as expected)
    <li>Modify the tree query and change the link column in the tree definition SQL query to a link to the same
    for example if your page is 100 , you would make the tree node link to the same page but set the P100SELECTED_NODE with selected node's id_
    This done here
    {message:id=4410987}
    In this case it would be
    'f?p=&APP_ID.:100:'||:APP_SESSION||'::::P100_SELECTED_NODE:'||EMPNO as link Now when you click on a tree node link , it would come back to the same page, but set the P100_SELECTED_NODE with the empno of the clicked node.
    <li> All that is left to do, is changing your Report so that it refers to the new item inorder to filter the records for this employee i.e empno
    SELECT ...
    WHERE empno= :P100_SELECTED_NODE

  • Unable to create Material CR , cannot display the page , dump in ST22

    Hi Experts,
    We are implementing MDG with EHP6 with following components installed with
    But I am unable to create Material CR  . I am getting the initial page for Create Material but after I hit continue, the next page cannot be displayed .
    It is creating an ST22 dump that the config id 'MDG_BS_MAT_PLANT_LIST_ATS' is having an invalid column 'DISPO_TXT' . But I am unable to find the relevant UIBB for this config id . Any thoughts on this issue and how to resolve it. How can I edit the configuration , I don't see that UIBB .
    I am unable to find the UIBB for config id 'MDG_BS_MAT_PLANT_LIST_ATS'
    I am unable to see the UIBB for MDG_BS_MAT_PLANT_LIST_ATS
    I could see the component configuration for MDG_BS_MAT_PLANT_LIST_ATS

    I found a note 1830324 from SAP  regarding this issue , but it is related to SP08 and we are already in SP09.
    This note is about the List Component (WD ABAP component FPM_LIST_UIBB_ATS). When the List Component is started it reads the columns from the configuration. All columns in the configuration should be part of the field catalog that is defined by the feeder class (feeder class method get_definition, parameter io_field_catalog). Otherwise the column is invalid (this could happen e. g. when a column that has already been configured is later removed from the field catalog). When such a invalid column is detected the List Component should raise an X-message and in the short text the name of the configuration and the name of the invalid column should be mentioned. The solution then would be to remove that invalid column from the configuration.
    Not sure why we are still getting the invalid column issue.

  • Unable to create ADF Table based on view object

    Hi
    I am using Jdeveloper 11.1.1.5
    I have created a view object based on the entity object. I am trying to drag and drop view object from data controls in to a blank page and choosing table -> ADF Table. The table is not getting created and at the same time I am not seeing any error message.
    Please help me
    Thanks
    Edited by: 880409 on Aug 19, 2011 5:58 AM

    http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
    http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/adfbc_new_features/adfbc.html

  • How do I create a path based on the arc of a crescent?

    I've created a crecsent by using the pathfinder and two circles. I also used the blend tool to create a line of evenly spaced, much smaller cirles. I want to create a path to use as a spline to align the series of small spheres evenly along a path that follows the inside arc of the crescent perfectly. I need to create a single path that follows the inside curve of the arc at a distance of, say, 0.1 inches all the way along so I can use that as a replacement spline. Unless there is a simpler method.

    Thanks, that works great!
    Another workaround that came to me last night was to create two circles on top of each other. Then I offset one and put H and V guides through it's center. I used the pathfinder on them to create the crescent. Then I made a small circle which I placed a certain distance from the top edge of what used to be the offset circle. Then I rotated a copy around the point which is the center of what used to be the offset circle. Then Crl+D until the arc is complete.
    I prefer your method though because it leaves more editing options if I want to go back and change blend options on the arc of circles and also because my workaround only works if the inside arc was created with a perfect circle and not an oval.

Maybe you are looking for