Unable to create object from stored procedure

Hi,
we are trying to use a stored procedure to do data preparation.
When we add the stored procedure to a universe, the procedure is executed succesfully and a table with one column, called "1" is created. When we try to create an object from this column, Designer does not allow us to do so.
We already tried to alias the column name in the stored procedure but we still get an unusable column called "1" back.
BO version used is XI R3.0. The stored procedure is written in Cobol on DB2 mainframe.
Does somebody know what we do wrong ?

Problem solved.
First we aliased the result columns in the stored procedure, that got rid of the "1".
Then we still could not create an object based on the column in the result set.
Apparently this issue occurs when the length of the column of the result set is too long.
We decreased the length and now we can create the object

Similar Messages

Unable to create object from stored procedure universe

Dear All Experts,
I am facing a problem on unable to create object dimensions on a Stored procedure universe. Fyi, I have successfully insert a stored procedure ('SP_Sales') with input parameter (@date) into universe (Universe_1). But I unable create any object based on the the stored procedured ('SP_Sales') due to it show nothing from the Edit Select Statement of 'Object1', empty for Tables nd columns windows.
Thefore, i unable to drag data in WEBI when i select univese as "Universe_1", it will not sure any object. Please advise.
I am using XI4.0, MSSQL2008.

Hi ,
You wont be able to edit the object definitions.
u2022 Designer generates one table per selected stored procedure (or many
tables if multiple result sets) and one object per column returned by a
stored procedure.
u2022 The result set structure is determined when you describe the function.
Please refer chapter 7(Page 451) of below document for more details.
[Universe Designer Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_designer_en.pdf]
Hope this helps.
Bilahari M

Design Question::Instantiating Object from Stored Procedure Output

Hi All,
I am confused with approaching this design issue. I called a Stored Procedure, and the output from the Stored Procedure is a REF CURSOR. The size of the REF CURSOR can be large.
My Question is, is it a good idea to pass the values from the REF CURSOR to a class constructor, there by instantiating an object of that type. lets say
//rset is of type ((OracleCallableStatement)callableStatement).getCursor(5);
//rset is not ResultType
while (rset.next()){
new ClassXYZ(var1, var2, var3);
/*var1, var2, var3 would be rset.getObject(1),rset.getObject(2),rset.getObject(3)
Class XYZ does some business logic
}Other things:
1) Will the JVM hold up assuming good enough JVM mem size, while creating objects for the range 100 thousands?
2) I do not know the cursor size. It can change randomly from business perspective. And, it would be in the range of 100 thousands
I was thinking, If I can "police" the call to the Class XYZ in case of large data. May be I am totally off the best solution. Any light on the best way to approach will be great.
Anyhow, this would be a standalone java application. Just in case if people are trying to suggest/recommend DAO etc.,
Thank you,
VJ

You can use ConvertTo-Html:
http://ss64.com/ps/convertto-html.html
Here's an example:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/5cb016d3-e2fb-43e7-9c01-10b6878056e4/formattable-lost-in-email
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Returning object from stored procedures

I am having a lot of trouble finding an example to demonstate how I return a Java/DB Object from a Java Stored Procedure. All the examples I have been able to find return one of the native types (VARCHAR, NUMBER, etc). As an example...
public static DataPoint getPoint() {
  return new DataPoint(
      new Timestamp(System.currentTimeMillis()),
      new BigDecimal(50.0));
Assuming DataPoint is a Java class mapped to an Oracle Data Type created via the following statement.
create or replace type data_point as object (
  p_date date,
  p_data number
After loading and publishing the procedure I get no (zero, 0) rows returned when calling. I should be getting one row returned.
Thanks,
Mike

Mike,
You said:
Assuming DataPoint is a Java class mapped to an Oracle
Data TypeI think your assumption is incorrect.
In any case, isn't this what "TopLink" is used for?
(I don't know, since I don't use "TopLink".)
Have you tried the TopLink/JPA forum?
Good Luck,
Avi.

Error while creating universe on Stored Procedure

Hi All,
I am trying to create an Universe on stored Procedure, Ended up with the error message as in snapshot,Your help is Appreciated.

Hi
You cannot directly insert object in Stored Procedure universe,Whatever object you are using to define your derived table,you have to include all those objects into the universe first.
From the below image you can see that i have 3 derived tables ,but whatever objects i am trying to use all those i have inserted into the universe.
Try to build like this save and export.
Let me know if you face nay error

Creating a SQL Stored procedure to call a CF function

I need to create a method to migrate data from a DMZ inside a firewall. To do this I was thinking of making a call from the DMZ web server (using CF) to an internal SQL server database stored procedure. The stored procedure would then call a CF template on the internal web server to pull data inside the firewall. Not my first choice on implementation but as a consultant I don’t make the rules I create the code to enforce them... Anyway these are the steps I need to follow.
1.)    Call the stored procedure and pass an int value with the call.
2.)    The Stored procedure calls a URL and passes the INT with it. I.E. http://Mylocalhost/Xferdata/MyXferTemplate.cfm?MyIntValue=”PASSED IN INT VALUE”
3.)    The MyXferTemplate does the actual data migration for me.
My question is how do I create a simple stored procedure to do this on SQL Server 2008??? After looking at the CF documentation I don’t think there will be much of a problem making the call to the stored procedure… its just writing the stored procedure… Any and all help is greatly appreciated!!!
Have an Ordinary Day...
Kurtis   ~|:-)

So far this is what I got... When I "execute' this code in SQ
L Server management studio it compiles without any errors but when I run it I get the message "http: is not recognized as an internal or extermnal command."
/********************************** Code to create the SP **************************/
USE
[KDLTransfer]
GO
/****** Object: StoredProcedure [dbo].[Migrate_DMZ_Data] Script Date: 03/07/2011 16:48:50 ******/
SET
ANSI_NULLS ONGO
SET
QUOTED_IDENTIFIER ONGO
-- =============================================
-- Author: KDL
-- Create date: 3/7/2011
-- Description: Migrate data
-- =============================================
ALTER
PROCEDURE [dbo].[Migrate_DMZ_Data]
-- Add the parameters for the stored procedure here
@MyIntValue
int = null
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
EXEC xp_cmdshell 'http://localhost/IREC/KDL/KDL.cfm?@MyIntValue, no_output';
END
/**************** Code to call the SP ******************/
execute Migrate_DMZ_Data @MyIntValue = N'5'

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Displaying data from stored procedure into textbox fields based on user input.

I have a stored procedure that is selecting data from a table called "Vendor" in my database. The data that is being returned are vendor names, vendor addresses, vendor Id's, etc...In my stored proc, I have one parameter that allows
the user to enter a vendor name and then return all the data for that specific vendor. The report that I'm building is going to look like a basic form with a bunch of textboxes on the screen labeled Vendor Address, Vendor Id, Vendor City, Vendor State,
etc...In the report I'm trying to build, the user will enter in a vendor name and then it will return all of the vendor's data based on what the user searches for. However, the report will only return ONE vendor's data at a time.
The problem is that some of the data in the database has very similiar vendor names, but different vendor addresses, vendor Id's, etc...In some instances the vendor name is actually
exactly the same, but the vendor address, vendor city, vendor Id, is all different. So what I did was added another parameter in my report that shows a drop down list of vendor names based on the wildcard search the user just did and
allows the user to select the exact vendor name that he/she is looking for based on what they searched. The problem I'm having is that I don't know what expression I need to put in each one of my textboxes to retrieve the correct data from
the vendor table that the user selects from the drop down list. So what I want to do is return the exact data from the vendor table based on the selection that the user makes from that drop down list. It's like I somehow have to compare the
drop down list parameter directly to the dataset but I don't know what expression needs to go in the textbox. I've tried...=First(Fields!VendorName.Value, "DataSet1").EqualsParameters!DropDownList.Value(0) but I keep getting an error message.
--Here is an example of the kind of thing the user might search for...when the user searches the word "sprint" it returns three different vendor names to the drop down list.
1. sprint
2. sprint
3. sprint co
Each one of those three vendor names has a different vendor address, vendor city, vendor ID, etc...but the vendor names are extremely similar and in some cases
exactly the same. In my report now I can't get the textboxes to return the correct data based on what the user selects. Any advice at all is greatly appreciated.
P.S. I didn't even know what SQL Server was a month ago and had zero knowledge of SSRS at all. I've learned a lot recently, but if you could explain a solution in the easiest way possible I would appreciate it. Thanks!

Hi Jrcowles,
If I understand you correctly, you wnat to list all the Vendor Name which like the user typed Vendor Name on a drop-down list, right? If in this case, we can use a cascading parameters to achieve your requirement. I have tested it on my local environment,
the steps below are for you reference.
Create an other stored procedure using the query below.
CREATE PROCEDURE GetVendorName
@VendorName NVARCHAR(50)
AS BEGIN
exec( 'SELECT * FROM Vendor WHERE VendorName LIKE ''%'+@VendorName+'%''')
END
Create another dataset DataSet2 and using the new created procedure.
Create another parameter VendorName2 and check "Allow Multiple Values" for this parameter.
On the Available Values tab, check "Get values from a query". Select corresponding dataset and field.
On the Default Values tab, check "Get values from a query". Select corresponding dataset and field.
The screenshots below are for you reference.
Reference
http://technet.microsoft.com/en-us/library/aa337169(v=sql.100).aspx
http://www.msbiguide.com/2012/02/adding-cascading-parameters-to-ssrs-reports/
Regards,
Charlie Liao
TechNet Community Support

Calling DTS package from Stored Procedure

I am getting error calling DTS package from CF.
So i want to call DTS package from SQL Server Stored
Procedure.
DTS package create text file. So no need of input or output
parameter.
What is the syntax?.
thanks for ur help.

Ted Kruger explains how this can be done in his blog post
Run SSIS Package from Stored Procedure
For every expert, there is an equal and opposite expert. - Becker's Law
My blog

Unable to Create Invoice from iSupplier

I am unable to create invoice from isupplier module,
the moment i click on create invoice "with a PO" or "without a PO" under finance Tab,
i get this error "You cannot complete this task because you accessed this page using the browser's navigation button(the browser Back button, for example).
But I have not accessed the pages with any browser navigation buttons at all.
please advise what may be preventing me from creating invoice?

This is caused by the incorrect setup of the browser.
The browser's "Temporary Internet Files" setting for "Check for newer versions of stored pages" was set to "Never". This caused the browser to pull up the old data instead of querying the server.
Please make sure the browser's "Temporary Internet Files" setting for "Check for newer versions of stored pages" is set to "Automatic".
You Used Your Browser's Navigation Buttons To Get Here (Doc ID 1214138.1)

"OIP-04796 Unable to create object instance"

I am using OO4O, version 3 for Oracle 8.1.7 on Windows with Visual Basic version 6.
I am getting the intermittent errors "OIP-04796 Unable to create object instance" and also "Method createDynaset of _IOraDatabase failed" - I think both are related to one another and from the documentation for OO4O, "OIP-04796" relates to the client side object cache of the OraDatabase class. Reasoning that the client side object cache was too small I attempted to increase the relevant properties of the OraDatabase object using the following: -
MyOraDatabaseObj.CacheOptimalSize = 400
However, at run-time, this property of the OraDatabase object does not get set accordingly in the VB IDE and after several attempts I can't seem to set it. I have also tried setting the CacheMaximumSize property but to no avail.
Can anybody indicate to me where I am going wrong and either with the setting of the above properties or with the error message in general if I am not on the right track with the cache properties. I don't suspect that it is my code because the problem "seems" to be intermittent.
Any and all help would be greatly appreciated. If more info is required then just ask as this is pressing problem.
TYIA
Mark Grimshaw

I am pretty sure the patches are available here. If you didn't explicitly install one then you have whatever the base release was.
If they are not available here (I almost never look here first for a patch) they are certainly available in the MetaLink file library for OO4O.

Getting an Exception Unable to create Object

I have the following methos I am getting the unable to create the file exception
I believe the problem is when is trying to read the object I try the following
record.setMessage(input.readObject().toString());
          /// record = (Message)input.readObject();1) convert the object to a string
record.setMessage(input.readObject().toString()); 2) I also try this
record = (Message)input.readObject()Notice that I put the put the file into the cryptpText area and then I get into a String
cipherTextString = record.toString();
         //put string in JTextArea
          cipherTextArea.setLineWrap(true);
          cipherTextArea.setText(cipherTextString); Here is the setMessage Method in the Message class
set
public void setMessage(String eMessage)
     myMessage = eMessage;
public void performStartTask()
        //choose the file to open
        int returnVal;
        String inputFileName = "";
        //open a JFileChoose
        JFileChooser chooser = new JFileChooser(new File (
                "C:\\Java_code\\java_files"));
        chooser.setDialogTitle("Please select an encoded file");
        returnVal = chooser.showOpenDialog(null);
        if(returnVal == JFileChooser.APPROVE_OPTION)
            inputFileName = chooser.getSelectedFile().getName();
        //Open the file
        ObjectInputStream input = null;
        //exception handlig here
        try
            input = new ObjectInputStream( new FileInputStream("C:\\Java_code\\java_files\\" + inputFileName));
          catch (IOException e)
              System.err.println("error opening the file");
          //read from the file
        record = null;
        record = new Message();
        try
           record.setMessage(input.readObject().toString());
          /// record = (Message)input.readObject();
         catch(EOFException eofe)
             return;
         catch(ClassNotFoundException cnfe)
                  System.err.println("Unable to create Object");
         catch(IOException ioe)
             System.err.println("Error reading from file ");
         } // end try catch
       System.out.println("Just read in" + record + "." + record.getShift());
         //put the file into the cryptpText area
         //first - get into a string
         cipherTextString = record.toString();
         //put string in JTextArea
          cipherTextArea.setLineWrap(true);
          cipherTextArea.setText(cipherTextString);
         closeFile(input);
          startBoolean = true;
    } // End of performedStartMethod

Ok I added this piece of code, hope is right
catch (Exception e) {
          StackTraceElement[] stack = e.getStackTrace();
            String exception = "";
           for (StackTraceElement s : stack) {
        exception = exception + s.toString() + "\n\t\t";
    System.out.println(exception); anf it shows that the error is here
record.setMessage(input.readObject().toString());
java.net.URLClassLoader$1.run(URLClassLoader.java:366)
          java.net.URLClassLoader$1.run(URLClassLoader.java:355)
          java.security.AccessController.doPrivileged(Native Method)
          java.net.URLClassLoader.findClass(URLClassLoader.java:354)
          java.lang.ClassLoader.loadClass(ClassLoader.java:423)
          sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
          java.lang.ClassLoader.loadClass(ClassLoader.java:356)
          java.lang.Class.forName0(Native Method)
          java.lang.Class.forName(Class.java:264)
          java.io.ObjectInputStream.resolveClass(ObjectInputStream.java:622)
          java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1593)
          java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1514)
          java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1750)
          java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1347)
          java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
          lab01recheverri.Lab01recheverri.performStartTask(Lab01recheverri.java:172)
          lab01recheverri.Lab01recheverri.actionPerformed(Lab01recheverri.java:103)
          javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2018)
          javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2341)
          javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:402)
          javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:259)
          javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:252)
          java.awt.Component.processMouseEvent(Component.java:6505)
          javax.swing.JComponent.processMouseEvent(JComponent.java:3321)
          java.awt.Component.processEvent(Component.java:6270)
          java.awt.Container.processEvent(Container.java:2229)
          java.awt.Component.dispatchEventImpl(Component.java:4861)
          java.awt.Container.dispatchEventImpl(Container.java:2287)
          java.awt.Component.dispatchEvent(Component.java:4687)
          java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4832)
          java.awt.LightweightDispatcher.processMouseEvent(Container.java:4492)
          java.awt.LightweightDispatcher.dispatchEvent(Container.java:4422)
          java.awt.Container.dispatchEventImpl(Container.java:2273)
          java.awt.Window.dispatchEventImpl(Window.java:2719)
          java.awt.Component.dispatchEvent(Component.java:4687)
          java.awt.EventQueue.dispatchEventImpl(EventQueue.java:703)
          java.awt.EventQueue.access$000(EventQueue.java:102)
          java.awt.EventQueue$3.run(EventQueue.java:662)
          java.awt.EventQueue$3.run(EventQueue.java:660)
          java.security.AccessController.doPrivileged(Native Method)
          java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
          java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:87)
          java.awt.EventQueue$4.run(EventQueue.java:676)
          java.awt.EventQueue$4.run(EventQueue.java:674)
          java.security.AccessController.doPrivileged(Native Method)
          java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
          java.awt.EventQueue.dispatchEvent(EventQueue.java:673)
          java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:244)
          java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:163)
          java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
          java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:147)
          java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:139)
          java.awt.EventDispatchThread.run(EventDispatchThread.java:97)
Just read innull.0

Returning rowcount and resultset from stored procedure

Hello,
In SQL Server you can return multiple resultsets from stored procedure by simple SELECT statement. But in Oracle, you have to use SYS_REFCURSOR.
Sample code:
CREATE OR REPLACE PROCEDURE sp_resultset_test IS
t_recordset OUT SYS_REFCURSOR
BEGIN
OPEN t_recordset FOR
SELECT * FROM EMPLOYEE;
END sp_resultset_test;
Is there any other way in Oracle 10 or 11 ?
Thank You.

What is the requirement? Oracle is far more flexible than SQL-Server... with numerous features that do not exist in SQL-Server. (Fact)
One of the biggest mistakes you can make is to treat Oracle like SQL-Server... trying to match feature A1 in SQL-Server to feature B3 in Oracle.
Does not work that way.. rather then stick to SQL-Server as SQL-Server does SQL-Server specific features far better than Oracle.
So instead of trying to map what a T-SQL stored proc to do to an Oracle ref cursor (even to the extent of using that very silly sp_ prefix to name the proc), tell us the problem and requirements... That way we can tell you what Oracle features and options are best used to solve that problem - instead of competing in some unknown feature comparison event with SQL-Server.

URGENT : Return Bulk data from Stored Procedure

Hi,
Tell me, how do I return a bulk of data which
does not exist in the data base
but is concluded while the Stored Procedure is executed
from the Stored procedure
to the C++ program.
For Example:
Table ABC
Field1 Field2 Field3
A 1 3
B 1 5
C 2 10
Table DEF
Field1 Field2 Field3
D 10 24
E 3 16
F 8 19
SP_TESTING
Depending on the values in both the tables
for some range of conditions,
a conclusion X is derived for each range value of the
condition range.
Now I need to return this bulk of data X with the
condition they belong to
back to the C++ code calling it....
NOTE : A stored procedure is requited as there is a lot
of processing
required before we conclude the result X for each value
in the condition range.
If I execute this code from C++ instead of Stored
procedure
it is very slow and speed is a prime requirement of my
system.
Also i'm not using any MFC class to access database.
I'm using ConnectionPtr, RecordsetPtr and _CommandPtr
from msado15.dll for database access...
One solution to this could be use of Temp tables.
As this process is used by a lot of different stored
procedures having a common
temp table to all will need something like 50 NUMERIC
fields, 50 VARCHAR fields
and so on, which doesn't seem like a very good solution
to this problem.
Sounds like something I would have done while in school,
implement a dumb solution.
So, please suggest me a solution as to how do I return
bulk data in the form
of recordsets from stored procedure.
Regards
Shruti

Use Out parameter mode
SQL> CREATE OR REPLACE procedure a1 (x OUT NUMBER, y OUT NUMBER) AS
2 BEGIN
3        x:= 1;
4        y:= 2;
5 END;
6 .
SQL> /
Procedure created.
SQL> SET SERVEROUTPUT ON
SQL> DECLARE
2   a NUMBER :=3;
3   b NUMBER :=4;
4 BEGIN
5   a1 (a,b);
6      DBMS_OUTPUT.PUT_LINE( 'a = ' || a );
7      dbms_output.put_line( 'b = ' || b );
8 END;
9 .
SQL> /
a = 1
b = 2
PL/SQL procedure successfully completed.By default parameters are copied to the OUT parameter mode .
COPY hint in PLSQL don’t send a pointer to calling program unit but NOCOPY
does.
Khurram

Ora-06550 returning data from Stored Procedure and Entity Data Model

Hi.
I'm creating an application that uses a WCF Service to return data. I also created a proyect with the EDMX design and mapped most of my DBModel to a classes context. I have added some of the procedures as well. One of them receive some parameters and return a Sys_RefCursor, that is populated according to the parameters.
I have declared the "<add >" tags in the Web.Config and imported the function of the Procedure. When I call the Asyncronous function I get different exceptions:
1. If I call the function, with all of the parameters i get:
Oracle.DataAccess.Client.OracleException: ORA-06550: línea 1, columna 8:
PLS-00306: número o tipos de argumentos erróneos al llamar a
'SP_HECHOSJURITER'
ORA-06550: línea 1, columna 8:
(wrong number or types of arguments in call to 'SP_HECHOSJURITER')
2. If i just set 1 parameter in the SP, returning the same type of data, I get:
Error al recibir la respuesta HTTP a
http://localhost/Procalculo.CGFM.SIGOC.DatosServices/ServiceDatos.svc.
(failed to receive http response. error 12152)
3. If I don't set any parameters in the procedure, it works fine, and return correct data.
It exclusively happen with one entity.
Any clue?
I appreciate any help.

When you return result sets from stored procedures to Entity Framework, you are very likely using implicit result sets. Implicit result sets don't need to be declared as a parameter in code, only in the <add> tags to define the metadata in the .NET config file.
For example, in the EF Oracle By Example, you'll see that the stored procedure in the function import has three parameters, but only two are declared in the code. The third one was defined in the config file.
http://download.oracle.com/oll/obe/EntityFrameworkOBE/EntityFrameworkOBE.htm

Unable to create object from stored procedure

Similar Messages

Maybe you are looking for