Unable to edit an ASP file in KM content

I have a colleague working on a customer portal where some ASP files were created and stored in the KM content. The customer is requesting to edit the content of one ASP file (basically, remove one section). However, when viewing the file in KM content, there is no option to edit it. This issue happens only to one specific ASP file, while all the other ASP files in the KM content are editable.
According to a previous developer (who has since left the project), the ASP file is a wrapped XLM file.
Hoping to get some help on this issue. Thanks in advance.

Hi, Charisse Basilio!
You need to add "text/asp" MIME type to the list of the Online editing types.
Try to do following:
1. Find a list of MIME types, see: Content Management - Utilities - Editing - Online Editing.
2. Add after comma this string: text/asp. For example:
Supported Mime Types for editing: text/plain, text/html, text/xml, text/asp
3. Save your changes.
Also, see this [article|http://help.sap.com/saphelp_nw70/helpdata/en/a6/181b09bcc7fe4389c8c17d2ad849cc/frameset.htm]
Hope it helps. Mikhail.

Similar Messages

Unable to edit old versioned file in KM

Hi,
I have a requirement wherein I need to edit older versioned file in KM programatically. I have got the older version file but I am not able to edit it and it gives an error; "*this collection does not support workspace creation".
Supopse, I have versioning enabled on /documents/Public documents/test folder programatically. I created new version of a file say test.txt in it through code. This much is working fine. But, editing of older versioned file is creating problem. I used the below code:
IVersionHistory iVersHistory = fileResource.getVersionHistory(); // fileResource refers to test.txt
wdComponentAPI.getMessageManager().reportSuccess("IVersionHistory SIZE: " +iVersHistory.size());
IResource resourceElement = null;
name=fileResource.getName();
IResource R1v5VCR=null;
for(int i=0; i < iVersHistory.size(); i++)
resourceElement = iVersHistory.get(i);
list.add(resourceElement);
if(resourceElement.getName().equalsIgnoreCase("test(3).txt"))
    //resourceElement.setAsCurrentVersion();
   ICollection collection = folder; // refers to /documents/Public documents/test folder
   wdComponentAPI.getMessageManager().reportSuccess("Reached "+collection.getRID());
   if( collection.isA(IExtendedCollection.class) )
     wdComponentAPI.getMessageManager().reportSuccess(" extending ");
     IExtendedCollection extendedCollection = (IExtendedCollection)collection.as(IExtendedCollection.class);
     ICollection workspace = extendedCollection.createWorkspace("myworkspace", null); ---> Error on this line
     wdComponentAPI.getMessageManager().reportSuccess("Created test folder workspace ");
     IExtendedCollection Wa = (IExtendedCollection)workspace.createCollection("test",null).as(IExtendedCollection.class);
     R1v5VCR = Wa.createVersionControlledResource(resourceElement.getRID(), resourceElement.getName(),null);
     wdComponentAPI.getMessageManager().reportSuccess("Created New versioned resource ");
    // more code but unreachable code
For editing a revision resource (i.e older version file), we have to create workspace on extendedCollection.
I went through this URL: [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/netweaver/netweaver-developers-guide-2004s/NetWeaverDevelopersGuide2004s_Documents/KM_articles_new/howto/rf/client_api/rf_client_api_sdn.html|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/netweaver/netweaver-developers-guide-2004s/NetWeaverDevelopersGuide2004s_Documents/KM_articles_new/howto/rf/client_api/rf_client_api_sdn.html]
Let me know if you have any solution or suggestion in this context.
Thanks,
Udit

Hi Julian,
Tjanks for the reply. But I already moved with that approach. I was finally able to create the workspace and a new versioned resource inside the workspace. But I get a new error on checkout of the resource: "subsequent checkin is expected to cause a fork!"
Below is the code snippet used:
IResource R1v5VCR=null;
IResource resourceElement = iVersHistory.get(5); // file(5).txt is coming properly
IResourceMetadata resourceMetadata=(IResourceMetadata)resource.as(IResourceMetadata.class);
IRidSet ridSet=resourceMetadata.getWorkspaceCollectionSet();
IRidIterator iter=ridSet.iterator();
RID workRID=null;
while(iter.hasNext()){
workRID=iter.next();}
ICollection newWorkSpace=(ICollection)ResourceFactory.getInstance().getResource(workRID,resourceContext);
wdComponentAPI.getMessageManager().reportSuccess("Created folder workspace ");
IExtendedCollection Wa =(IExtendedCollection)newWorkSpace.createCollection("test",null).as(IExtendedCollection.class);
R1v5VCR = Wa.createVersionControlledResource(resourceElement.getRID(),resourceElement.getName(),null);
R1v5VCR.checkOut(); --> Error on this line
So, this issue is taking time now and I want to resolve it soon.
Regards,
Udit

Unable to Edit Imported Jpeg files.

I'm currently using iPhoto 9.6 and OS 10.10. I have created jpg stills from .mov projects using QT Pro and imported them successfully into a previous version of iPhoto where I was able to crop them and make rudimentary color and exposure adjustments. With the new iPhoto 9.6 I cannot. I get an error message "Image Cannot Be Edited. The original format is not supported."
So I am assuming the only way to edit these imported jpegs is to open them in Lightroom or Photoshop make my adjustments and then attempt to re-import them into iPhoto or maybe just stop using iPhoto all together for this kind of file?

Yes "master" copies of files - those located in the iPhoto >>package contents >> Masters folder organized by import date - once they have been edited from within iPhoto (exposure corrections, cropping, straightening, etc) become the master copies.
Bewilderingly vague. They are the masters. They are never edited. The photos are edited and the results recorded in the SQL database. The never "become the Master copies". They are the Masters and never become anything.
To prove this I have selected a master file from with this directory and created a copy of it on the desktop where I gave it a new name, then re-imported it to iPhoto and re-opened it there. It is a virtual clone of the original edited file - edited from within iPhoto save for its name - an "edited master".
If you made a copy of a Master then it's not a virtual clone it's an actual clone. "It is a virtual clone of the original edited file" Huh? What's an "original edited file"? It's a Master or something else? Which is it? There is no concept in iPhoto of 'edited Master'. There are Masters. That's the file as imported from your camera. It is never edited. End of story.
Subsequently from within iPhoto I have chosen the original photo - the one that had been modified to begin with - and reverted this file to its original version. So then I had two masters of the same shot - one edited and one in its originally imported state. Why did I do this (and originate this post)?
No you didn't. You had two masters to begin with and thereafter you had two masters at the end. When you reverted to original all you did was delete the edit decisions for the database and destroy a preview. In no case was the Master touched.
The terminology is important because it explains how the app works. You're conflating photos (which are edited in iPhoto) with files (which are never edited in iPhoto), all photo edits are virtual until baked in on export. That's why the concept and the term Master is important. Edited Master means nothing, Master of an Edited Photo does, but that's a different thing.
Because I could not re-edit or export these affected photos unless I first re-imported them to iPhoto by either locating the original files from storage media or making copies of them from iPhoto's package contents>>masters folder as above and importing them back into the iPhoto library. Once I did this - there were a lot of these affected files - I could edit and export to my heart's content. Remember, these files were modified from within earlier versions iPhoto itself. Yes, some files had been converted to jpegs from original PICT exports out QT Pro using Photoshop Elements.
Because your database was corrupted. It has nothing to do with Masters/Versions or anything else. It was broken.
How do I explain this apparent corruption of the iPhoto library database? Disclaimers to the contrary, I put the onus on having to convert the db every time there is an app iteration which is sometimes coupled with an OS upgrade (like with Yosemite). I suspect that the file metadata is susceptible to corruption during these upgrades. It is the only variable in an otherwise static and stable environment that could possibly result in library corruption short of hardware failure.
That's one possibility. Here are some more: anytime the app is interrupted writing to the database - by a crash, hang or even a power surge, bad blocks on a disk - there are many possibilities..
And again, there is no need to convert the db "every time there is an app iteration". There are updates when it is not necessary. And, as I keep on saying, OS upgrades make no difference. It's app upgrades only.

Unable to edit .vsdx visio file that is inside a document library using visio 2010 sp2

I have Visio 2010 SP2 installed locally inside my machine. The current version can open vsdx files by doing some conversions. I got the following scenario inside my SharePoint server 2013:-
Currently I have Visio file (with .vsdx extension) uploaded to my SharePoint 2013 document library.
If I click on the Visio file I got the following dialog.
I select “Edit”, click on ok.
Then the visio 2010 application will convert the current file and open it locally inside my machine.
But the opened file will have it name as “Copy (1) of ….”, as follow:-
So if I do some changes to the Visio file and I click on save I will not be able to save my changes back to the SharePoint server’s document library. Now if I do the same steps for a .vsd file not .vsdx then I can directly open the Visio file (without any
conversion process) and I will be able to save my changes back to SharePoint server.
So can anyone advice how to be able to edit .vsdx files which are uploaded to SharePoint document library using visio 2010 SP2 ?
Thanks

Thank you for your ideas.
After that last posting, but before your response, I asked them to add the local farm to their trusted sites zone. Several blogs I had encountered while searching had listed that as something they had tried.
As soon as they added the site to their trusted site zone, the problems went away.
It was definitely not all users - I only had 2 people directly contact me about the issue.
I never got a chance to ask them about other SharePoint sites - they were working on the sites where they spent most of their time - I don't know if they had other sites.
The old location and the new location of these 2 sites are in the same site collection - it was moving them from
http://myfarm/sites/div/dept67/site1
to
http://myfarm/sites/div/dept64/site1
basically (with the actual names changed to protect my job).
The site collection is /sites/div . So the site collection features are the same.
I suppose that the site features could have changed between the export and the import - but since things are working now and I didn't change any features, I don't think that it is.
At this point, things appear to be working. However strange that seems to me.

Unable to edit PDF output file

After report server generating the PDF file, The PDF file cannot be edited by acrobat writer. Is there any method to make the PDF file editable ? Thanks

Hi Auanthony,
Sorry, I can't help you, but want the same from you.
Actually we need to implement this security feature in our application. Will you kindly tell me how you have generated such PDF reports?

Unable to edit my raw files after uploading

I am using PCS2 and windows XP. Canon 30-and-40D. I am just learning about photoshop and RAW files. I did go to the update 4.3 was unable to use so I down loaded DNG. I can convert the RAW files to jpig however I can't use them in bridge or photoshop as a RAW file to make the changes that I would like. After doing some reading on the forum I am still having problems. My plugin is 3.7. Is their anything in preferences that might need to be changed. Thank Joe

Personally, I wouldn't dismiss the idea of the DNG converter, at least until you get Lightroom and are comfortable with it. Just download the latest version and use it to create Digital negative copies of your raw images. You will still have your original raw images, and the image data in the DNG files is exactly the same image data. You can get identical results with the DNG file. And you will be able to use ACR 3.7 just as you always have been able to do.
Then, Lightroom is something that you can learn at your own pace. As you become more comfortable with it you will be able to work with the DNG files that you started working on with ACR 3.7. I think starting with the DNG converter would provide you with a good transition as you become familiar and comfortable with the new controls and the new interface in Lightroom.

Unable to edit "some" Finder files ...

Previously, while using Snow Leopard, I was able to use "Finder" to open and edit my own created files.
Recently I have updated to Mountain Lion and now I have a problem editing "some" of my files. Sometimes I have to "duplicate" to edit a file. Sometimes I have to type in my password to allow me to access the file. Sometimes I can open the file but I can't edit. What's happening?
One of the warning messages states "You don't have permission to write to the folder (XXXXXXX.numbers). It asks to duplicate and then save. I tried to do a duplicate but after saving I can't find the "new" file.
Any ways to just go back to my original file access as previously with Snow Leopard?

Here I go again....
First of all I managed to take my previously unsavable file and creat a "New Folder". I named the folder the same as my uncooperative file. I then placed that file into the folder and now I am able to use and save the file. I don't know why this is but it works.
Next...
I need to do the same to hundreds of other files. Snik, snik, snik....Every time I try to add a file into its "new folder" a window opens up that states "Finder wants to make changes. Type your password to allow this." It will take me several years to do just that to all my files. Is there an easier way?????

PSE12: unable to edit layers in file created in Photoshop 4.0. [was: Adobe Photoshop 4]

Changed computers from XP to windows 7. I was using Adobe Photoshop 4.0 from a floppy. I can't load it on my new computer so I bought elements 12. It doesn't allow me to alter the layers I created? Please advise.

Once your in the Expert mode, click on Layers at the bottom of the pse 12 editor window.
more info:
Photoshop Elements Help | Panels and bins

Unable to edit checked out file in NWDS

A project was created in NWDS for DCs fscm/bed/web/shared and is/uces/war.
But while syncing source, or compiling, we received this error:
Apr 24, 2014 1:37:09 PM
/userOut/Development Component
(com.sap.ide.eclipse.component.provider.listener.DevConfListener)
[Thread[ModalContext,5,main]] ERROR: fscm/bd: Build failed for
sap.com/fscm/bd(sap.com_FSCM_BD_1) in variant "default": Cannot build
because used component is broken: sap.com/fscm/bd/web/bd( sap.com_FSCM_BD_1)
How would we go about getting sap.com/crm/tc/core to my NWDS so that we can compile?
Thanks, in advance.

the track is newly created?
did it work before?
if it is new, most case your basis configuration work is not done
they have to import the dependent sca to the track

Unable to Edit DOCx file converted by ExportPDF - HELP!

I am unable to edit a DOCx file that I created by converting a PDF file using the ExportPDF subscription.
The file was originally created in Adobe InDesign. I have the PDF. I need to convert it to DOCx to edit the text. The document is basically text and a few photos. I don't care about the photos.
When I convert the PDF using ExportPDF I get a DOCx file but I am not able to edit the text. It appears to have converted it into graphics. I tried to highlight the 'boxes' hoping to use the Word 'convert tables to text' feature, but that does not seem to work here.
I tested ExportPDF with another PDF that was created from a text-only DOCx file. ExportPDF converted it seamlessly to a DOCx file.
How can I convert a PDF file, originally created in Adobe InDesign, to a DOCx file in which I can edit the text.
Thanks.

Dannie,
Are you familiar with dreamweaver templates and editable regions? If the logo is in the template, then you need to modify the template file. The changes you make to the template will automatically be propogated to all of the files which use the template. If your html file uses a template, the html code will look like its commented out.
Also, you should not have to download the html fiile from your server because you should always keep a copy of all the html files on your computer.
I don't know about the SWF error.
Good luck.
mitzy_kitty

Unable to open ppt file in KM content

Hi,
I am unable to open the ppt file in KM content. I am getting the error : "could not open ...........ppt.".
We are using the reverse proxy to connect to the portal.
Can anyone help me in this regard.
Raghu

Hi Praveen and SJ,
I uploaded the ppt file in some folder in KM content. Then I tried to open it . but I am unable to open the file. However I am able to open the file after right clicking the folder and save as target to my PC.
It is there in MIME types. Is there any extra configuration needed to open the ppt file firectly.
Not only in Km content but also in KM iview also I am unable to open it directly.
I am able to open doc, pdf files directly. I am having problem only with ppt file.
Can you help me on this ...
Thanks,
Raghu

Unable to edit html file

Hi,
I downloaded an html file from our server to edit the logo. However, I am unable to edit the logo part. It's like commented out. And once I opened the file on Dreamweaver CS5, I am getting this pop-up message:
"This page contains some SWF objects that may not work properly in the most recent versions of Internet Explorer. Dreamweaver cannot convert them to the new SWF markups. Please delete each of them and insert again."
I can't edit the html file and change the logo. Please help.
Thank you and God bless!
Dannie

Dannie,
Are you familiar with dreamweaver templates and editable regions? If the logo is in the template, then you need to modify the template file. The changes you make to the template will automatically be propogated to all of the files which use the template. If your html file uses a template, the html code will look like its commented out.
Also, you should not have to download the html fiile from your server because you should always keep a copy of all the html files on your computer.
I don't know about the SWF error.
Good luck.
mitzy_kitty

Unable to edit XLSM files in SharePoint using hyperlink?

Hi All,
Unable to edit .xlsm files using hyperlink, please guide me.
Thanks
Ramanjulu Naidu N

Hi Ramanjulu,
Did this happen to all users?
Did the "Read Only/Edit" dialog pop up when you click the .xlsm Name link from SharePoint 2010?
Could you see the yellow message bar with "Edit Workbook" button when you open the .xlsm file in your Excel Application?
You can check if the following kb article could solve yellow message bar missing problem, set "Browser File Handling" as Permissive for your web application, or update the registry for client Office application.
Also check if the add-on "SharePoint OpenDocuments Class" is enabled in your IE 32-bit browser.
http://support.microsoft.com/kb/2661910
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to edit Hosts file in Win7 Home Prem 64bit.

Clean install. Administrator account. Unable to edit the permissions of the hosts file. There is one in the drivers\etc file, which I cannot edit. There is supposed to be one in %systemroot% \SysWOW64\drivers\etc but there is no etc folder in the drivers folder.
Turned off DNS Server. gpedit.msc not found when calling it in "run". This is the first time I've used 64bit anything, so a bit of a newb in that respect.
Any ideas?

Hi,
As you would know, some of the Windows 7 users can’t save the host file how they like it. The host file itself will simply vanish what the user had done with it.
In my scenario, I was unable to fix this even after all the instructions provided in above posts. Hence, I have come up with my own idea and luckily it
worked.<o:p></o:p>
For those users who experience this problem, here are the instructions to fix it.
First of all, you should have the administrative privileges to edit the host file. In normal case, if an admin user directly go to the host file in system 32 and add his preferences
and then save it, it should keep the changes. However, in some wicked scenarios, it will not. I had done a detailed research on this through all the available online forums and even contacted Microsoft several times with no luck.
So, here you go with a correct solution for this problem.
Note: If you are not comfortable with Windows OS and don’t know what you are doing, this process can mess up things.
Hence, do not attempt if you are not 100% sure you can make it.
Login to an administrator account.
In the run command (Windows key + R) type, “control folders” and hit enter.
Click on the tab called view.
Select the radio button for Show hidden files, folders and drivers –ON.
Uncheck the ‘Hide extension for known file types-ON
Click on Apply and then OK.
Type “drivers” in run command and hit enter. It will take you to where the folder “drivers” located in System 32.
From the “drivers” folder, double click the folder named “etc.”
Now you can see the “host” file along with others.
Now, in the search area in start menu, type “notepad.exe” and open the notepad.exe as administrator. (In order to do this, you can right click on the notepad.exe shown and select
“Run as Administrator.” If UAC prompted, click YES/OK)
Now, you will have a notepad open with administrative privileges.
At the top left side of the notepad click on “file” and then select “Open.”
A box will appear which will allow you select the file to open. Carefully, navigate to the location where the “host” file is located. To do that, select the drive where you
installed Windows. If you have the Windows installed in C: select ‘Local Disk (C :)’ > Windows > System 32 > drivers > etc. At this point, you might not have another option to proceed or select from. The window would be empty. To proceed further,
select the option “All files” from the drop down menu which is located above the “Open” and “Cancel” button. You can now see all the files located in etc folder.
Select “hosts” from the menu and click on “Open.” Note: You can either click on open or double click on the file.
Now, you will have the host file information open in the notepad which you had already initiated before with administrative privileges.
Make whatever changes you as you wish. (Example: If you need to block a web site called
www.block123.com you can type 127.0.0.1
www.block123.com right under the local hosts.
Make sure you do not change any other letters or characters which are already saved in host file.
This will completely mess up your computer. For more information on the information about host file, refer the Microsoft web site:
http://support.microsoft.com/kb/972034 . If you
have accidently delete/edit anything from host file, please delete the complete information stored in host file and copy and paste the host file information from Microsoft which is appropriate for your Operating System.)
Click on “file” again and select “Save as” and save it in etc. If the path is showing correct to etc folder, save it to etc. If it is navigated to somewhere else, follow the
instructions provided above and select etc folder and then save it.
Now, go back to the actual host file location which is in System32 > Drivers > etc (You would have it already open if you had followed the instructions just like the way
I have provided)
There you can see 2 host files. One which has already been there and the other one you just saved.
Among the two, one is called “hosts” and the ‘type’ would be ‘file.’ This is the original host file. The other which you have just saved will be named as “hosts.txt” with the
file type as ‘Text Document.’
Right click on the original host file and select rename. You can even click on that file and press F2. This will enable the option to rename the file. Rename the original host
file as “hostold” and hit enter.
Now, select the second host file which we have saved as a text document and rename it as “hosts.” Make sure that you DELETE the .txt file extension in order to change the type
“Text Document” to “File” and hit enter.
Now, you have successfully saved the host file with your preferences.
You can now delete the file which we renamed as “hostold.”
We are done. You would need to do this process all over if you need to edit the host file again. I know it is difficult, however, it is our own requirement and we have to invest
few minutes on this.
Enjoy your computer with a great feeling that you have finally edited the host file as per your wish and take it from here. Wish you luck.
Should you have any questions, please feel free to ask.

Unable to edit PDF files in Adobe Acrobat DC

i am unable to edit a file in adobe acrobat dc i have tried with multiple files and everytime i click edit pdf it get a pop up that says adobe acrobat dc has encountered an unknown error however i have been able to edit a few pdf's i tried everything from re downloading a new file to saving it in acrobat reader and nothing is working please help

Hi imadb,
Since you have the Acrobat Pro DC 30-day trial, please try opening that to edit your PDFs (rather than opening them in Reader, and clicking the Edit PDF button).
If you search your computer, you should have both an Adobe Acrobat Reader DC and and Adobe Acrobat Pro application. They can coexist, but it does make things a little confusing.
If you want to evaluate Acrobat Pro DC, it's best that you open it directly. That way, you can get the real "lay of the land" with Acrobat before making any purchase decisions.
Best,
Sara

Unable to edit an ASP file in KM content

Similar Messages

Maybe you are looking for