Unable to find valid certification path after an upgrade from 11.1.1.6 to 11.1.1.7

Hi,
I had a small composite deployed in 11.1.1.6 and after an upgrade to 11.1.1.7 I am getting
javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException:
PKIX path building failed:
sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
Does it mean that my soa composite now cannot validate the certificate of the server it is trying to connect to?
Can somebody share thoughts on how to fix it?
Thank you,
Anatoliy

Hi Robert,
Thank you much for the quick response. Not having big knowledge under my belt in this area I tried
1. Changed the keystore passphrase under my managed weblogic domain for the Demo Identity Keystore
2. ./keytool -importcert -alias avsclient -keystore /dnat8o/fmw/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/jre/lib/security/cacerts -file client_cer.cer
Was prompted with the password but entering what I did enter in step 1 didn't help. Do I have to bounce the managed server once I change the passphrase, if what I a mdoing makes sense at all, not sure
Thank you,
Anatoliy

Similar Messages

I am getting the ssl error when trying to use launchpad on ssl, i can access adminui through ssl with no errors but launchpad says "unable to find valid certification path to requested target"

Hi I desperately need help to fix this error. I installed Adobe LCES4 with ssl enabled and i can access the adminui and workspace on the browser but he problem is when i try connecting to launchpad using https on the server even doing the simple thing like converting document to pdf throws the following error.
any help will be appreciated
DSC Invocation Resulted in Error: class com.adobe.idp.DocumentError : javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target : javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
thanks

We tried adding certificate in trustore.jks file, but it was not successful.
What error you are getting while importing the certificate?
Just perform below steps once:
Download required certificate first
Run CMD as administrator> move to SUP_HOME\Servers\UnwiredServer\Repository\Security
Paste this syntex.
keytool -importcert -alias customerCA -file <certificatefilename>.crt -storepass changeit -keystore truststore.jks -trustcacerts

Error executing on back-end server: unable to find valid certification path to requested target

Hi,
I am facing below issue while creating MBO for rest web service with https url in SUP 2.2 Mobile SDK. We tried adding certificate in trustore.jks file, but it was not successful.
For adding certificate we followed steps on below url:
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01283.0213/doc/html/fre1299108475463.html
Also, we are trying to access webservice url through proxy, settings for the same are present in Mobile SDK.
Can you please guide us in this regard?
Appreciate your quick help

We tried adding certificate in trustore.jks file, but it was not successful.
What error you are getting while importing the certificate?
Just perform below steps once:
Download required certificate first
Run CMD as administrator> move to SUP_HOME\Servers\UnwiredServer\Repository\Security
Paste this syntex.
keytool -importcert -alias customerCA -file <certificatefilename>.crt -storepass changeit -keystore truststore.jks -trustcacerts

Problem with Java keystore and certificates (unable to find valid cert path

Our program is made so that when a certificate is not signed by a trusted Certification Authority, it will ask the user if he/her wishes to trust the certificate or not. If they decide to trust the certificate, it will accept the self signed certificate and import it into the keystore and then use that certificate to log the user in. This works fine. It will import the certificate into the keystore and use the specified ip address to establish a connection with the LDAP server (Active Directory in our case) and authenticate properly. However, the problem arises when we then try and connect to a different ip address (without restarting tomcat, if we restart tomcat, it works fine...). It imports the certificate into the keystore fine, but always gives the exception
"Root exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target"
and does not authenticate with our LDAP server (which is Active Directory). The problem seems to be that it is no longer looking at the System.setProperty("javax.net.ssl.trustStore", myTrustStore);
I have tried multiple times to just reset this property and try and "force" it to read from my specified trust file when this error happens. I have also imported the certificates directly into the <java_home>/jre/lib/security/cacerts and <java_home>/jre/lib/security/jssecacerts directories as the java documentation says that it will look at those directories first to see if it can find a trusted certificate. However, this does not work either. The only way that I can get this to work is by restarting tomcat all together.
If both of the certificates are already in the keystore before tomcat is started up, everything will work perfect. Again, the only problem is after first connecting to an IP address using TLS and importing the certificate, and then trying to connect to another IP address with a different certificate and import it into the keystore.
One of the interesting features of this is that after the second IP address has failed, I can change the IP address back to the first one that authenticated successfully and authenticate successfully again (ie
I use ip 1.1.1.1, import self signed certificate, authenticates successfully
login with ip 2.2.2.2 import self signed certificate, FAILS
login again with 1.1.1.1 (doesn't import certificate because it is already in keystore) successfully authenticates
Also, I am using java 1.5.0_03.
Any help is greatly appreciated as I've been trying to figure this out for over a week now.
Thanks

Please don't post in threads that are long dead and don't hijack other threads. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
I'm locking this thread now.

Error when invoking webservice on https (unable to find valid certification

I have a webservice which run on https..
When I made a simple test (jsp) page on my local computer all works fine (jdeveloper 10g) ..
When I deploy the ear file to remote oc4j and run the test page I get the error:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
My test page is just simple jsp page with some system parameters like this:
================
String dir = request.getRealPath("/cert");
System.getProperties().put("javax.net.ssl.keyStore", dir + "/adriatic.p12");
System.getProperties().put("javax.net.ssl.keyStorePassword", "as-p4ss");
System.getProperties().put("javax.net.ssl.keyStoreType", "PKCS12");
System.getProperties().put("javax.net.ssl.trustStore", dir + "/service.megapos.si.jks");
System.getProperties().put("javax.net.ssl.trustStorePassword", "megapos");
System.getProperties().put("javax.net.ssl.trustStoreType", "JKS");
================
why this works on windows and doesn't work on linux?
All paths to my certificare and truststore are correct.
On my local pc (windows) there is a Jdeveloper Oc4j version (10.1.2.0.2) and works fine
On linux there is a oc4j version 10.1.3.4.0 and doesn't work..
thank you for any help

Peter,
Apparently the linux jdk/jre doesn't have the ability to validate the certificate being used.
I dunno if [url http://www.java-samples.com/showtutorial.php?tutorialid=210]this might help you?
John

ODC: ERROR PKIX path building failed: to find valid certification path

Hi to all,
some one has experienced the error: PKIX path building failed: to find valid certification path to request target.... on the ODC while trying to connect
we solved temporally adding the ssl to the java virtual machine, is there a path in the odc to set the ssl ?
ODC 10.350
Thanks!

If you are trying to connect to UCM via SSL , Please check below note
ODC - Errors Attempting to Connect to UCM Configured Through SSL (Doc ID 793137.1)

[solved] Unable to find the root device after an upgrade - diff. case

Background: I recently upgraded my installation done in August 2011 to the most recent packages with 'pacman -Syu' - which, amongst some other minor issues that I fixed, apparently broke my installation's boot sequence. Not sure if this is relevant, but I forced the upgrade as it's been prescribed here.
Note to self: do backups before any major upgrades like this.
Problem: The problem is of the same origin as seen in this post - systems lets me know it cant access the root partition anymore. I'm halfway through the procedure that pineapple-biku suggested but since my partition layout is different - and - because I don't have much understanding of what *exactly* I'm supposed to do and accomplish, I'm stuck for now.
What is the best way to find out the exact labels of encrypted volumes and their corresponding kernel device IDs (i.e. /dev/sda6 for 'tmp' and so on)? I have several volumes of the same size, thus it's hard to guess which is which without knowing for sure.
Details: My setup has an unencrypted '/boot' partition and 7 other encrypted partitions, including /root, /usr and others. These are contained within a single extended partition.
Any help will be greatly appreciated. In case I've left out some important information, let me know, and I'll do my best to provide it.
Last edited by Raija (2012-02-28 03:06:25)

Thank you both for your assistance. Some more understanding was exactly what I was in need of.
falconindy wrote:The news item you posted says to force the installation of a single package, not the entire upgrade. These two things are not equivalent.
Thanks for pointing that out. I'm still a newbie when it comes to Pacman, thus prone to such mistakes.
Gcool wrote:
Raija wrote:What is the best way to find out the exact labels of encrypted volumes and their corresponding kernel device IDs (i.e. /dev/sda6 for 'tmp' and so on)? I have several volumes of the same size, thus it's hard to guess which is which without knowing for sure.
# ls -lah /dev/disk/by-label
# ls -lah /dev/disk/by-id
# ls -lah /dev/disk/by-uuid
This should get you on the way on discovering which disk is what exactly (you'll need to know the / and /boot partition in order to fix the issue).
Thank you. I'll try that.

Airport Utility was unable to find your Airport device after restarting.

- I just updated the firmware on my base station (it a white dome?? i think snow?) to 5.7
- I am running AirPort Utility 5.5.2 (also recently updated)
- I have (3) AirPort Expresses (just updated firmware yesterday) and now are not being seen in the airport utility. They had been running for about two years just fine.
I have done a hard reset and was then able to see the Airport Express and go through set up. Upon finalizing the set up I get this message:
"Airport Utility was unable to find your Airport device after restarting."
This is happening with all 3 AirPort Expresses

Hello !
I had the same kind of problems when I upgraded to the latest version of Airport (5,7).
The Airport express seemed to have been disconnected, and nothing I could do to reconfigure it, after hard resetting it, seemed to be working.
I did two or three hard resets before remembering having been in a situation like that a while ago.
I went back to the Mini, **deactivated the firewall (in the "preferences" panel), then deactivated also the firewall of the Modem/router provided for my internet connection. Then I went in the other room and did another hard reset of the Airport express, came back in the mini's room, opened the Airport utility, the icon of the Airport express was already visible (which wasn't the case before... ), did the re-configuring.
The reconfigured Airport express reappeared very quickly, then I reactivated the firewalls of the Mini and the router. Voilà !
It took less than two minutes !
And since then the Mini have been streaming music without a glitch to the Airport express.
I hope this will help you and others !

"Airport was unable to find your base station after restarting"

Trying to connect AX to my HP printer for wireless printing. Walk through the process of joining my wireless network, everything appears to work (finds my base station, finds my wireless network). When I finish the final step, macbook appears to hang but then comes back with this error message "Airport was unable to find your base station after restarting"..."problem rejoining the wireless network or finding the base station". I then go into Airport Utility again and base station is gone. I have to reset AX to factory setting (removing any profiles) before Utility recognizes AX again. I repeat process...same results, ugh. Any help would be appreciated.

I updated to 7.3.1, and just wasted 3 hours getting my Airport Express working again. What a nightmare.
Flashing amber light after update to 7.3.1 and not found by Airport Utility. Hard reset allows Airport Utility to find it, but after configuration never found again and get flashing amber light, until hard reset again...
Here are the steps that worked for me to get back to 7.3. and functional Airport Express.
1) I had ethernet connected, I was unclear whether ethernet doing anything but desperate. Performing reset from MacBook with airport on.
2) Hard reset on Airport Express so that Airport Utility can find it. (i.e. press reset button for 5-10 seconds until light flashes amber 4 times. The factory reset did not seem to work.)
3) Cross fingers that Airport Express shows up in Airport Utility. (Did most times for me, but not always.)
4) Hold down Option key and select Check for Updates from Airport Utility application menu. This allows selecting old updates.
5) Download 7.3.
6) Click Manual Setup (for the Airport Express)
7) Select Upload Firmware from the Base Station menu
8) Select 7.3, apply, cross fingers
After applying 7.3 may need to do one more hard reset, I am not sure if it showed up again on its own. However, once available in Airport Utility and once again with the 7.3 firmware, was able to configure and get working again as normal.
Apple link with tips for firmware and Airport Utility:
http://support.apple.com/kb/HT1218

Download doesn't work; i keep getting "unable to find firefox.exe" even when I open from program files folder; working onwindows xp with service pack 3

download doesn't work; i keep getting "unable to find firefox.exe" even when I open from program files folder; working onwindows xp with service pack 3

As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?

Iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help

Hi everybody,
iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help
It gives me an option to choose a domain but when I go to "sites" it doesn't recognize none of them.
Thanks :-)

In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07

Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07, also when I click on any prompt button the prompt values are displaying in a separate screen rather than displaying in a model window.

I have resolved it by applying stylesheets and clearing the cache.
Thanks,
Jayaprakash Tedla

Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits. After several attempts at this, LR6 won't even launch properly...shows the splash screen but

Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits. After several attempts at this, LR6 won't even launch properly...shows the splash screen but that's it. The program is buggy...need an update/revision quickly!!

If you're on Windows, check out a free program called Audacity--it's fantastic. With Audacity the process of converting a 48.000 kHz to 44.100 kHz is as simply as opening, changing the sample rate, and then exporting again, as an MP3.

Where can I find the link to download the upgrade from 5 to Lightroom 6 (stand alone) version?

Where can I find the link to download the upgrade from 5 to Lightroom 6 (stand alone) version?

Just to be clear for others who might read this thread: There is a free trial available for both CC and standalone (perpetual license) customers. The free trial for both sets of customers is called "CC"; but if at the end of the trial you want to convert to a standalone (perpetual) license, it's just as easy as with previous versions. You pay $149 ($79 if upgrading), get a license key, and enter the key into the free trial.

Unable to find valid certification path after an upgrade from 11.1.1.6 to 11.1.1.7

Similar Messages

Maybe you are looking for