Unable to get the data from table controller

Dear All,
I am facing the following problem in BSP tableview,
I am having tableview on page as below
<htmlb:tableView id              = "reportsTable2"
                       headerVisible   = "true"
                       headerText      = "Pending PANs:"
                       footerVisible   = "true"
                       design          = "standard"
                       visibleRowCount = "20"
                       width           = "100%"
                       fillUpEmptyRows = "false"
                       columnWrapping = "false"
                       columnWidth     = "200"
                       sort            = "server"
                       keyColumn       = "panid"
                       onRowSelection = "alternate()"
                       selectionMode   = "SingleSelect"
                       iterator        = "<%= tv_itr %>"
                       table           = "<%=IT_DATE_RANGE_PAN %>" >
      </htmlb:tableView>
I want collect the table view data in DO_REQUEST method, when i press the sort option on any column in table.
i used the code in DO_request,
if lv_button_id NE '0'.
      tv ?= cl_htmlb_manager=>get_data(
             request =   runtime->server->request
             name    = 'tableview'
             id      = 'reportsTable2' ).
      tv_data = tv->data .
but , I found no table content in tv_table.
even i tried with export, import .. normally we will dod in ABAP.   not wotking.
export IT_DATE_RANGE_PAN2 from IT_DATE_RANGE_PAN to memory id memid1.
import IT_DATE_RANGE_PAN2 to IT_DATE_RANGE_PAN from memory id memid1.
Can any body help me to solve the above issue.
Regards,
Kishan

Hi,
Refer your earlier forum...
how to collet data from tableview in MVC
Thnx
suriya

Similar Messages

Unable to get the data from the stored procedure

Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date                date;
v_end_date                  date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
   a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id                  stage_bill.batch_id%TYPE;
v_beginning_service_date    stage_bill.beginning_service_date%TYPE;
v_bill_id                   stage_bill.bill_id%TYPE;
v_bill_method               stage_bill.bill_method%TYPE;
v_bill_number               stage_bill.bill_number%TYPE;
v_bill_received_date        stage_bill.bill_received_date%TYPE;
v_bill_status               stage_bill.bill_status%TYPE;
v_bill_type                 stage_bill.bill_type%TYPE;
v_change_oltp_by            stage_bill.change_oltp_by%TYPE;
v_change_oltp_date          stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code      stage_bill.client_datafeed_code%TYPE;
v_client_id               stage_bill.client_id%TYPE;
v_created_date          stage_bill.created_date%TYPE;
v_date_of_incident    stage_bill.date_of_incident%TYPE;
v_date_paid         stage_bill.date_paid%TYPE;
v_deleted_oltp_by     stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date    stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill     stage_bill.duplicate_bill%TYPE;
v_ending_service_date   stage_bill.ending_service_date%TYPE;
v_event_case_id        stage_bill.event_case_id%TYPE;
v_event_id            stage_bill.event_id%TYPE;
v_from_oltp_by         stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status   stage_bill.oltp_bill_status%TYPE;
v_review_status     stage_bill.review_status%TYPE;
v_schema_name        varchar(50);
v_Load_date          date;
v_Load_user            varchar(50);
v_Row_Effective_Date   date;
v_Row_End_Date         date;
Begin
if p_data_load_date is null then
    select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
   select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
    raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
    LOOP                                                       -- cursor c_get_data loop begin
      FETCH c_get_data
       INTO
        v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
   v_Load_date,
   v_Load_user,
   V_Row_Effective_Date,
   v_Row_End_Date;
    EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
       v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
    END LOOP;
    CLOSE c_get_data;

Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date   DATE;
v_end_date     DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
         NVL (p_data_load_date, SYSDATE) - 1
INTO   v_start_date,
         v_end_date
FROM   DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING      (SELECT *
              FROM   stage_bill
              WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON         (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
    INSERT     (batch_id,
                beginning_service_date,
                bill_id,
                bill_method,
                bill_number,
                bill_received_date,
                bill_status,
                bill_type,
                change_oltp_by,
                change_oltp_date,
                client_datafeed_code,
                client_id,
                created_date,
                date_of_incident,
                date_paid,
                deleted_oltp_by,
                deleted_oltp_date,
                duplicate_bill,
                ending_service_date,
                event_case_id,
                event_id,
                from_oltp_by,
                oltp_bill_status,
                review_status,
                schema_name,
                load_date,
                load_user,
                row_effective_date,
                row_end_date
    VALUES     (a.batch_id,
                a.beginning_service_date,
                a.bill_id,
                a.bill_method,
                a.bill_number,
                a.bill_received_date,
                a.bill_status,
                a.bill_type,
                a.change_oltp_by,
                a.change_oltp_date,
                a.client_datafeed_code,
                a.client_id,
                a.created_date,
                a.date_of_incident,
                a.date_paid,
                a.deleted_oltp_by,
                a.deleted_oltp_date,
                a.duplicate_bill,
                a.ending_service_date,
                a.event_case_id,
                a.event_id,
                a.from_oltp_by,
                a.oltp_bill_status,
                a.review_status,
                'HRI',
                SYSDATE,
                'ETLPROCESS001',
                v_start_date,
                NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter

Am unable to get the data from Sys.databases when i use where condition for column owner_sid

Hi all,
Help me here when i try am unable to get a data,Can some one help me with a query to get.
If it cant be done can i know why..
select * from Sys.databases
where owner_sid='0x01'
What am trying is to get a login
names from syslogin
table with respect to Sid.
Select a.name,b.name,a.owner_sid from Sys.databases a
Join Syslogins b
on a.owner_sid = b.sid
where owner_sid like '0x01'
Thanks all in Advance.....

Below are a couple of examples of how to accomplish the task. Note that SID is varbinary so the literal should not be enclosed in quotes.
SELECT
a.name AS DatabaseName
,b.name AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
JOIN sys.server_principals b ON
a.owner_sid = b.sid
WHERE owner_sid = 0x01;
SELECT
a.name AS DatabaseName
,SUSER_SNAME(owner_sid) AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
WHERE a.owner_sid = 0x01;
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Unable to get the data from ms sql stored procedures using crystal report 10

Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected]

Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected]

Unable to get the selected from table when AM Pooling is disabled

Hi,
I have created a EO and VO for EMPLOYEE table and dragged on to pagefragment as ADF table. RowSelection property is set as Single.
It is displaying the data in the table. I have written below method which should be invoked on selection of a row.
It should give the Firstname and LastName column values of the selected row.
public void onSelectTable(SelectionEvent selectionEvent)
RowKeySet selectedEmps = getEmpTable().getSelectedRowKeys();
Iterator selectedEmpIter = selectedEmps.iterator();
DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding empIter = bindings.findIteratorBinding("EmployeeVOIterator");
RowSetIterator empRSIter = empIter.getRowSetIterator();
while(selectedEmpIter.hasNext()){
Key key = (Key)((List)selectedEmpIter.next()).get(0);
Row selRow = empRSIter.getRow(key);
String firstName = selRow.getAttribute("FirstName").toString();
String lastName = selRow.getAttribute("LastName").toString();
This method is working fine.
But I have disabled the Application Module Pooling and tried in local machine(AM Configuration -> Pooling and Scalability -> Uncheck Enable Application Module Pooling).
Then it is not workinng. it is returning null to selRow. Ideally it should work.
Can any one pls suggest why it is not working when Application Module Pooling is disabled?
Regards,
Vinod

Which jdve version do you use?
What is the whole use case?
I don't understand why you make it so complicated when the framework gives you what you like fro free. If you leave the selectionListener like it was when you dropped the table onto the page the framework handles the selection for you. If you like the name and first name of hte selected row you can drag the name, firstname from the VO onto the table (even if you don't want to see it, dorp it an e.g. inputText) and drop it onto the page. This will create the needed binding for you in the pagedef file. as you don't want to see the inputtext components switch into source mode for the page and remove the components. Removing components in source mode will keep the bindings, whereas if you remove them in design mode the bindings are removed too.
Now, if you select a row in the table, the attributes for name, firstname automatically getting the correct values assigned.
If you like to get to them from a mangaed bean you should read http://www.oracle.com/technetwork/developer-tools/adf/learnmore/23-generic-table-selection-listener-169162.pdf which shows you how to first use the default selectionListener and then do something else with the row (if you like).
Timo

Application process is not getting the data from table

I have created the following application process based on AJAX select value but using a pop up LOV
DECLARE
my_det VARCHAR2 (200);
BEGIN
SELECT DM_00010_CUST_NAME INTO my_det
FROM ODM_MD_00010
WHERE DM_00010_CUST_CODE = nvl(:P11_DT_00020_CUST_CODE,21);
exception when no_data_found then null;
HTP.prn (my_det);
END;
the process is getting no data found error ( hence the exception) so I am getting NULL in the name field on screen.
any help ?

the javascript I have in the region header is:
<script language="JavaScript" type="text/javascript">
function f_getDet ()
var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=getDet',0);
get.add('P11_DT_00020_CUST_CODE',html_GetElement('P11_DT_00020_CUST_CODE').value)
gReturn = get.get();
if(gReturn)
{ html_GetElement('P11_DT_00020_CUST_NAME').value = gReturn }
else
{ html_GetElement('P11_DT_00020_CUST_NAME').value = 'null' }
get = null;
</script>

Unable to get the data from a website with dynamically filled textboxes when accessing through myWb.Document.GetElementById("num1").InnerText;

Hi Team,
I am learning on webbrowser control and during the learning phase i have the following issue:-
My webbrowser [mywb in this case] is successfully navigating and displaying the website content in webbrowser control. However; that site has three textboxes with dynamically allocated text from asp script
code behind; I have tried to display these textboxes values by providing the correct id of these textboxes in my visual studio 2013 code; but I am not receiving any data except null. Can you help me on this as early as possible.
asp code written to dynamically assign the data to textbox:-
<%
myvar=Request.form("some")
Response.write("<input type=text id=num1 value=" + myvar+ ">")
%>
The code written in VS 2013 to access the textbox by its id when the DocumentCompleted event is triggered:-
string mystr ="";
mystr = myWb.Document.GetElementById("num1").InnerText;
MessageBox.Show(mystr);
Thank You in Advance.
Regards, Subhash Konduru

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because the issue is related to website, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

How to get the data from Pooled Table T157E.

Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.

create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil

How to get the data from the model node like a table ?

I want to get the data from the model node once a record ,and the node is bound to a internal table in the RFM which I called in the R/3 system. Who can give me some advice to achive it?Thank you!!

Hi,
To get the data from the node:
wdContext.node[your node name].current[node name]_InputElement().get[specific element in the node];
or you van use:
wdContext.current[your node]Element().get[your element in the node];
examples:
wdContext.nodeZ_Mepro_Po_Detail_Stock_Distri_Input().currentZ_Mepro_Po_Detail_Stock_Distri_InputElement().getUcpd_Flag();
wdContext.currentT_Delv_ReqsElement().getShelflife();
regards,

Why do we get the data from a view to a report.

hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

The problem here is i am not able to get the data from the list

hi all,
i have the following code
EnrichedProductCatalogue enrichedProductCatalogue1 = new EnrichedProductCatalogue();
enrichedProductCatalogue1.setAssetCount(2);
enrichedProductCatalogue1.setBlockingProduct("Weekend Freebee");
enrichedProductCatalogue1.setBlockingReason("Compatability");
ArrayList<String> availableActionsList = new ArrayList<String>();
availableActionsList.add(EnrichedProductConstants.ADD.toString());
availableActionsList.add(EnrichedProductConstants.REMOVE.toString());
enrichedProductCatalogue1.setAvailaibleActions((ArrayList<String>)availableActionsList);
BundleProduct bundleProduct = null;
Product product = new Product();
product = new Product();
product.setProductName("International");
product.setProductClassName("International");
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);
bundleProduct = new BundleProduct();
bundleProduct.setCommercialProduct(product);
enrichedProductCatalogue1.setBundleProduct(bundleProduct);
listOfEnrichProducts.add(enrichedProductCatalogue1);
listOfEnrichProducts.add(enrichedProductCatalogue1);
here i have an list called listOfEnrichProducts.
here i am adding two objects of enrichedProductCatalogue.
which contains a object called BundleProduct.
which has a reference for Product class.
here this product class has a list which contains objects of another class called UiCategory.
the problem here is i am not able to get the data from the list which contains UiCategory objects .
the following is the UI
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{pageFlowScope.sample1}"
binding="#{pageFlowScope.sampleManagedBean.dataTable}"
partialTriggers="apimethods ::apimethods">
<af:column sortable="false" headerText="ProductName" id="c2">
<af:outputText value="#{row.bundleProduct.commercialProduct.productName}" id="ot15"/>
</af:column>
<af:column sortable="false" headerText="ProductClass" id="c12">
<af:outputText value="#{row.bundleProduct.commercialProduct.productClassName}" id="ot19"/>
</af:column>

<af:column sortable="false" headerText="AssetCount" id="c22">
<af:outputText value="#{row.assetCount}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="blockingReason" id="c3">
<af:outputText value="#{row.blockingReason}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="blockingProduct" id="c4">
<af:outputText value="#{row.blockingProduct}" id="ot3"/>
</af:column>

</af:table>
Can anyone pls give some solution ...

Hi Frank,
value="#{pageFlowScope.sample1}"
here sample is
Map<String, Object> flowScope1 =
ADFContext.getCurrent().getPageFlowScope();
flowScope.put("sample1", listOfEnrichProducts);
this is not the problem . i am able to get all the values except the following .
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);

Unable to get the data from table controller

Similar Messages

Maybe you are looking for