Unable to group with page breaks when creating pivot table in BIP

Hi,
I'm using BIP 10.1.3.4 and I need some assistance with report with pivot tables. I used the wizard to successfully create the pivot table but i need to add a group and break the page on that group. Is there any way i can do this?
Thanks.

HI Bala,
I am Durgaprasad from Pune-INDIA, working as a OBIEE developer, I have one query which I mentioned below can you please go threw it.
I have done migration Discoverer Admin EUL Layer into OBIEE repository using below methodology.
Navigate to the <installdrive>\OracleBI\server\Bin directory. There are two important files in this directory: the migration assistant executable file named MigrateEUL.exe and a properties configuration file named MigrationConfig.properties.
Could you please help me how to migrate discoverer plus workbooks and worksheets into OBIEE Answers?
go through below link, It will show navigation steps for migrating of EUL from Discoverer to OBIEE.But i need migration of workbooks and worksheets from Discoverer into OBIEE Answers.
http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/discomigration/migrate_disco_biee.htm
This is very great full help to me …
Advance thanks for your suggestions.
Regards
Duraga Prasad.

Similar Messages

Error Message: "Excel cannot complete this task with available resources" when creating pivot table with Excel 2013

Hi,
One of our users encountered this problem with Excel 2013 while creating pivot tables, particularly with large files. We tried to modify Virtual Memory
of the pc but error still persist. Why does this happen and how can we resolve this? Thanks.
Another error message encountered by the user, this time when opening large files. The files she tried to open are working fine in 2010. But when opened in 2013, it prompted : "There
isn't enough memory to complete this action. Try using less data or closing other applications."

Hi,
In regarding of the issue, please provide us more information to assist you better.
Did your user using the Excel 2013 and Excel 2010 with same PC? If not, please let me know the both of the 2 PCs' hardware list/Windows operation system info.
Did you using Excel 2013 32bit version and Excel 2010 64bit version?
General speaking, this issue usually occurs with Office 2013 32 bit version. It has a limitation of 2Gb of memory that can be used by its process. And the 64-bit Excel can handle larger workbooks.
Thus, if your user using 32bit Excel, I recommend try 64bit Excel instead.
Here is a similar issue, we also could try it:
http://answers.microsoft.com/en-us/office/forum/office_2007-excel/excel-cannot-complete-the-task-with-available/d31b1822-ebde-4c9b-8d11-e54bb652847d
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Issue With Page Break When Sorting is also applied on group

Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumar

Hi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha

Error when creating pivot table in BI publisher template

When I try to create a chart or pivot in BI publisher it keeps throwing error
'Please load Datasource first'
It allows me to create table so I am not sure why is complaing when creating a pivot.

Hi
This error you are getting while creating RTF template right?
yes, before proceeding to use the columns you need to load the XML data of your data model into your template
1. Open Microsoft Word.
2. From the Oracle BI Publisher menu, select Log On.
3. Enter your BI Publisher credentials and the URL for the BI Publisher server. (Contact your system administrator if you do not know the URL.)
4. The Open Template dialog presents the same folder structure as your BI Publisher Reports home page. Select the report for which you want to build a template.
5. Select Open Report to load the data to the Template Builder; or double-click <New> in the Layout Templates pane.
Note that any existing templates will be listed in the Layout Templates pane.
select <New> in Layout template section than select Open layout tempate to get automatically load your data into template..
ELSE
do manually,
in publisher,
after saving your report go to view the report
select data template and import that to your local drive.
now in your MS-Word.. in bi publisher toolbar
you find Data option, then select the load xml and give that path...
after this you can carry on creating charts or tables..
Hope this is what you want..
Thanks & Regards
Kishore Guggilla

Smartform issue with page break

Hi All,
I have an unusual issue with page break. Here is my scenario, I have a group of items in my table main area and for each group there is sort of header that prints. Similarly there are multiple groups needing a header whenever there is a new group printing. So far it prints fine. But whenever there is a page break and when items from the same group also print on the next page the same header needs to print on the top of next page similar to how the header area repeats on each page. Unfortunately I did not see any page break event for table main area.
Here is an alternative I have tried but having issues: I have created two rows for this group header one printing from header and another printing from main area. Whenever there is a page break the same group header prints as part of the header and on the rest of the page it prints from the main area. But in a particular scenario, there is a new group starting at almost bottom of the page but as there is not enough space left on the same page (page protection) jumps to next page. In this case there are two group headers printed one coming from the preivous page main area and another coming from the next page header. I hope my explanation is clear enough to understand.
Please suggest if there is any basic feature of smartform that I have missed out can solve this issue or if there is another alternative you can think of. I appreciate your responses.
Thanks..

I was able to solve this issue on my own.
Instead of checking for a page break on header line I am using a flag that is prepopulated in the table. I set this flag whenver a new group of items starts. If the flag is set I print it from the main area and if it is not set I print it from the header. This helped in avoiding the multiple header lines..

How do I get a section break/page break when the item is greyed out?

I've created an A4 document in word processing mode, with four identical A6 text boxes covering the entire page. Then I've created a second page with four more A6 text boxes so I can print a postcard on both sides of the card. Trouble is, Pages has made two extra text pages that I don't want, the first is linked to Pages 1 and 2, and the second is separate. I can't create a section break or page break because the command is greyed out, so I can't delete page 3. When I try and delete page 4, which is a stand alone page, it also deletes pages 2,3 and 4, leaving me with just page 1!
I don't have any problem with page breaks or section breaks in an ordinary A4 document with just one text box on a page, but I often want to create multiple text boxes and when I do I have always had this problem, ever since Pages was first introduced. Can anyone tell me what I'm doing wrong, please?

Thank you, Yvan, but I've tried that. Firstly, I unchecked the headers and footers tick box in the Inspector because I want the postcards to be exactly A6 size, that is, one quarter of A4. I've tried making the lower two text boxes slightly smaller (which I don't really want to do, because I want them A6 size) but I still can't get the insertion point to appear below the text box – it stays resolutely in the next page and won't go back up to the previous page. Any further ideas? Thank you.

How to export pdf from numbers with page breaks

I am trying to export a pdf from numbers that contains page breaks. When i print the page breaks are created for printing automatically and i like scrolling with no page breaks while working on spreadsheet. But, if export pdf the file becomes one long scrolling page. Which is good on screen but when email recipient tries to print, it prints to a single page and type face is impossibly tiny to read. I would like to export a view in which page breaks are included but can not seam to find the process (i have recently switched from excel to numbers).

One thing you might try (if you haven't already) is to pretend you are printing your numbers document, but after you press the "Print..." button (perhaps after doing the "Print setup" thing) do "Save as PDF" instead of just printing it. Presumably, this gives you the PDF that is used to do the print job.

How to put a page break when a value changes

Hi there, I am very new to BI Publisher. I realize this is a really SIMPLE question, but I can't seem to find a CLEAR answer.
I have a set of data that I have a repeating group for in my RTF template and it works great. But I want to have a page break each time one of the values changes and I cannot figure out how.
here is the xml
<?xml version="1.0" encoding="UTF-8" ?>

<PIR05>
<LIST_G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>123</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>614</LINE_NO>
<COUNT_NO>614</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
- <G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>1232</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>615</LINE_NO>
<COUNT_NO>615</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>562354</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>WOR RECV</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>603</LINE_NO>
<COUNT_NO>603</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
</LIST_G_ITEM_NO>
<WHSE_DESC>OPM INVENTORY ORG</WHSE_DESC>
<CS_NODATA>617</CS_NODATA>
<CYCLE_NO>000000014</CYCLE_NO>
</PIR05>
I want the g_item_no (repeating group) to have a page break each time LOCATION changes.

You can declare two variables, to hold the previous and current LOCATION values and break the page when it differs.
Or just before your end-for-each, have this code.
<?if:position()!=1 and position()!=last() and LOCATION!=following::LOCATION[1]?><xsl:attribute name="break-before">page</xsl:attribute><?end if?>
Ensure that its placed in a form field.
This will have a page break when LOCATION changes.

Help with Page Breaks!

Hello,
I am having great difficulty with page breaks.
I have included a link below to a jpg of a format template I am working on (edited for public release, but it works):
http://home.swbell.net/grog1/work/pagebreaksample.jpg
The layout template has many text form fields but I have re-colored them all to grey so that the pagebreak stands out in pink (and default text is the same as the help text for clarity).
The data format that I am using for this layout template can be found at:
http://home.swbell.net/grog1/work/testdata.xml
This data is for sample use only and would (normally) contain many G_ORDERS for multiple G_ORD_TYPES in multiple G_REGIONS.
My problem is that it does not matter where I place the page break, it simply does not work correctly.
As you can see from the current placement I WISH the report to break between each and every occurrences of REGION in the group “REGION”. At this placement it does not break at all.
I ‘can’ get the report to break (incorrectly, but at least it breaks) if I place this exact same syntax into the innermost grouping of data (i.e. the G_ORDER group) but even then the breaking is NOT CONSISTENT at all. In this case I would ‘expect’ it to break before every order…it does not.
I have also tried the syntax: “ <xsl:if xdofo:ctx="inblock" test="1=1"><xsl:attribute name="break-before">page</xsl:attribute></xsl:if> “ (without the quotes which got from he forum here) as well as the MSWORD pagebreak (which has never worked for me). None of these work correctly.
Any assistance in or insight into getting my reports to CONSISTENTLY break at the appropriate times would be most appreciated as I have been trying to get this to work for several days now...
Thank you,
Scott

Hello again!
I have the pagebreak problem working, but I would dearly like some insight as to why/how it is working…
I have template builder 10.1.3.2.1 for reference and I now have the report breaking at the correct times, i.e. after each region.
My confusion is that to get it to work I must use the syntax and placement of the pagebreak text field exactly as shown below. No other placement cause the pages to break correctly and the other syntax sample varations I have found on this forum, etc (listed above) do not work at all.
Please review the link to the (now working format template) jpg and provide feedback/insight.
http://home.swbell.net/grog1/work/pagebreaksample_working.jpg
Thanks in advance for feedback,
Scott

Maintaining manual page breaks when exporting to .doc OR .rtf

Hi, all.
I've tried to find solutions to this on this board, but am coming up short. Please help!
I have inserted page breaks into my pages document. When I export to .doc or .rtf, the page breaks are gone (the separate pages now just run into each other). Any ideas?

MVes,
I tried to duplicate your reported behavior.
I found that a Pages file with Page Breaks _exported to .rtf_ opens in TextEdit with NO breaks, opens in Pages with NO page breaks and opens in Word with page breaks as designed.
I found that a Pages file with Page Breaks _exported to Word_ opens in Pages with Page Breaks as designed, opens in TextEdit with page breaks as designed and in Word with page breaks as designed.
So it appears that the only problem is with opening an RTF doc in Pages or TextEdit. There have been other reports here that indicate that Pages support of RTF is weak on import.
Jerry

How to indent second line in a very long heading when creating a table of contents?

I need to make a table of contents.
Some of the chapter headings are very long and fill more than a single line.
When I create my table of contents, I want the second lines to be 'pushed in' in the table.
Like this
1 chaper one xxxxxxxxxxx
2 Chapter two xxxxxxxxxxxxxxxxxx
3 Chapter three x xxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxx xxxxxxxxxxx
4 Charpter four xxxxx xxxxx
5 Chapter five xxxxxxxxxx xxx xxxxx xx xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxx xxxx xxxxx
I thought I had solved it by having the actual chapter headings indented like this, but the table of contents overlooks this/overrules this.

See also my reply to the duplicate thread:
http://social.technet.microsoft.com/Forums/office/en-US/8f88b64c-1a15-4761-aed9-f662f17b94ca/how-to-indent-second-line-in-a-very-long-heading-when-creating-a-table-of-contents?forum=word
Cheers
Paul Edstein
[MS MVP - Word]

When creating a table why should we give promary key

when creating a table why should we give promary key

Hi Rambabu,
Primary key is needed so as to avoid duplicate entries and ensure that there are unique entries in the table.
For some applications, it is useful to uniquely identify the rows in a table by one or more columns so that you can process them in a specified sequence, for example. You can do this by assigning a primary key. The column names that are to create the table key are represented by the keywords PRIMARY KEY. The input values of the key columns defined in this way must not be a NULL value.
You can use the primary key to insert rows in a table in the same way as you insert rows in a base table when no primary key is defined. However, the system outputs an error message if you attempt to insert an existing value into the primary key column a second time, since the uniqueness of the column is ensured by defining the primary key.
A primary key can consist of multiple columns. However, it is unusual for a key to be constructed from more than five columns, since this makes it difficult for users to enter unique values. The arrangement of the columns behind the keywords PRIMARY KEY defines the key sequence.
Regards,
Sekhar

Fields in Field Catalog not available when creating condition table

I see that field HIEBO01 to HIEBO12 are available in Field Catalog, but I don't see these fields when creating condition table
Please let me know what I am missing here.
Any insight on this would be really helpful. Thanks guys!

you need to get them added to the pricing structure KOMKAZ or KOMPAZ based on whether you need @ header level or @ item level respectively.
and then add the logic in the sales order user exit for these added field in the pricing_prepare_TKOMK or pricing_prepare_TKOMP...again based on header level or item level.....
Then go back to the field catalog and select from the respective structure and add them, Then you can see them when creating cond tables.
Hope this helps. Hope i havent misunderstood your query.,
Regards
Sai

Can any one tell how to create pivot table

Hi ,
Am trying to create a pivot tabel in the MDM Import Manager. Iam able to see the preview of the pivot table which i want to create. But when i try to click "OK" button, an error message getting displayed like...
"The new table cannot be created because the data source is not updatable.You may need the data source to an updatable format such as Microsoft Access before proceeding".
Due to the above error am not able to create pivot table, plz let me know if any one know how to solve this problem
Thanks & regards
Praveen k

Hi Praveen ,
The solution to your problem is -
The data source must be updateable in order for MDM to
create the new pivot or reverse pivot table. However, you can still
perform the steps leading up to table creation including the preview
even on a data source that is not updateable, so that you can explore
pivoting or reverse pivoting as a transformation option. If you then
decide you want to actually create the new table, convert the data
source into a format that is updateable (such as Microsoft Access) and
perform the pivot or reverse pivot on the new data source.
To create a pivot table, you must identify the source fields that
participate in the pivot, which ones contain metadata and which ones
contain data, which ones must be combined, the one-to-one
correspondence between metadata and data fields and/or field
combinations, and the key field or fields.
To create a pivot table:
1. In the drop-down list of source tables, make sure the table you want to
pivot is the current source table.
2. In the Source Hierarchy tree, select all the field nodes corresponding to
both the metadata fields and the data fields by which you want to pivot.
3. Right-click on one of the nodes and choose Create Pivot Table from the
context menu, or choose Source > Create Pivot Table from the main
menu
4. MDM opens the Create Pivot Table dialog
5. In the Key Fields dual-list drop-down control, move one or more fields
from the Available Fields list to the Selected Fields list to identify the
key fields on which to perform the pivot
6. In the dual-list control of fields, drag-and-drop the data fields from the
Field Values Become Field Names list to the Field Values Become
Field Values list
7. If necessary, select two or more fields in either list that must be
combined into a field combination, and click on the Combine button, or
right-click on one of the fields and choose Combine from the context
menu
8. If necessary, drag-and-drop fields or field combinations within each list
to create the one-to-one correspondence between metadata fields and
data fields.
9. Click on the Preview button to display a preview of the first ten records
of the pivot table
10. When you have verified that the pivot operation you have defined will
have the desired effect, click OK to close the Create Pivot Table dialog.
11. The MDM Import Manager creates a new table named table <Pivot>
in the data source (where table is the name of the original source
table).
12. In the drop-down list of source tables, select the newly created pivot
table on which to perform subsequent import processing.
Hope that helps ...
Regards
Deepak Singh

Formating page select in a Pivot Table

We have a Pivot Table view that has 12 columns, so it is a bit large (more or less like 2 screens wide).
The Page select is displayed in the middle of screen so the user doesn´t see it right away... he has to roll the screen and then see/select it...
Pls...is there a way to format the Page select in the Pivot table to the left ?
txs.
Antonio

Hi,
A pivot table view of this data would look something like this by default:
Now switch back to the criteria tab and edit the ‘column properties’ associated with your fact measure. Choose the ‘Data Format’ tab, tick to override the default format and choose ‘Custom’.
It seems that the syntax for this custom format is positive-value-mask (semi colon) negative-value-mask (semi colon) null-mask. So this means we have a few options.
E.g. if you want zeros (0) instead of null then enter:
*#,##0;-#,##0;0*　
If you want a dash/strike (-) then you could enter:
#,##0;-#,##0;-
Or if you want to add a custom message then something like this would work:
#,##0;-#,##0;no data
http://obieeelegant.blogspot.com/2011/06/how-to-replace-null-values-in-obiee.html
if it's not working above method use BIN in report
thanks
Deva

Unable to group with page breaks when creating pivot table in BIP

Similar Messages

Maybe you are looking for