Unable to launch captivate after updating windows

As title, nothing happens when I click the captivate icon.
OS : windows 8.1
I've check the application log, and get this error message:
Faulting application name: AdobeCaptivate.exe, version: 8.0.1.242, time stamp: 0x543b9a99
Faulting module name: CPDatabase.dll, version: 8.0.1.242, time stamp: 0x543b8874
Exception code: 0xc0000005
Fault offset: 0x0000000000001b3c
Faulting process id: 0xba0
Faulting application start time: 0x01d05c7208fadc08
Faulting application path: C:\Program Files\Adobe\Adobe Captivate 8 x64\AdobeCaptivate.exe
Faulting module path: C:\Program Files\Adobe\Adobe Captivate 8 x64\CPDatabase.dll
Report Id: 4aa05f29-c865-11e4-beaa-a4173184c980
Faulting package full name:
Faulting package-relative application ID:

Hello,
Welcome to Adobe Forums!
Could you please elaborate it more ?
Are you not able to launch the product or you are having issues while working on Adobe Captivate ?
Regards
Himanshu

Similar Messages

  • After updating windows 7 and firefox i constantly receive timed out or server not found messages

    i constantly receive timed out or server not found messages after updating windows 7 and firefox 2 weeks ago. this was almost never a problem prior to updating

    Connection Errors
    https://support.mozilla.com/en-US/kb/Error%20loading%20web%20sites#w_connection-errors
    Interrupted or Reset Connection
    https://support.mozilla.com/en-US/kb/Error%20loading%20web%20sites#w_interrupted-or-reset-connection
    Check and tell if its working.

  • Iam unable to restore backup after updating ios

    Hello friends iam unable to restore backup after updating ios to 6.1.3.plz help me how to restore backup iphone 4

    Did you already try to connect in recovy mode and restore, as explained in this article?
    http://support.apple.com/kb/HT1808

  • Unable to restore backup after updating iphone 4, because "not enough free space"

    I updated my iphone 4 to v7 via itunes (v12), and in doing so, my camera roll was erased as were most of my calendar events.  I am trying to restore the backup that I created just before updating, but I get an error message in itunes that says "itunes could not restore the iphone" because "not enough free space".  There is 2.5gb free on my iphone, and I created the backup just before updating so there should be plenty of room.  Does anyone know how to get the iphone to restore and/or how to put my pics & calendar back?  itunes hangs up at the end while syncing too...

    hello again, don't post twice the same question, it won't be answered faster.
    see your previous thread: iphone 4 unable to restore backup after updating to v7

  • Unable to restore 4s after updating software

    unable to restore 4s after updating software , the wake up screen is nonresponsive

    Hi D.Cohen
    Thanks 4 ur attention , I did exactly what u told several times , the restoring ( updating ) starting , after some times , there is a message appears to ask for allowing pc to access iphone data , followed by another one telling to give  answer via iphone ( which is still unresponsive ).
    After downloading completed , I got another message , telling that there is an error occurred and asking to try again . ( each trial take around  1-2 hours )
    pls advise
    0

  • I am unable to make calls after updating ios7. Its saying call failed every time

    I am unable to make calls after updating ios7. Its saying call failed every time when I make a call to anyone.

    follow this thread https://discussions.apple.com/message/23340070#23340070

  • G400s after update Windows 8.1 the webcam can't detect

    Hello,recently i want use my webcam but I realize my webcam cannot use, it says can't detect my webcam!
    Last time can use webcam no problem,but after update Windows 8.1 the webcam cannot use.
    I have problem with my webcam lenovo g400s for windows 8 64bit. And I search and check many solution on website or google.It not work, and my device manage >imaging device dint have webcam camera list inside
    and also I already download last the camera driver for Windows 8 on lenovo download website there ( download.lenovo.com /express/ddfm .html )after install it with error "Not Appropriate Driver to be installed. 
    Please help

    hi Rayman94,
    Welcome to the Lenovo Forums.
    Can you try the following:
      - Follow this guide on how to show hidden devices on the device manager. When done, look under Device Manager > Imaging Devices or Other Devices and see if you can now see the camera or an unknown device.
      - If you now see the Camera under Imaging Devices but is grayed out, try to right click on it > choose uninstall > delete the device driver then reboot the system. After the reboot, install the Camera Driver (AVC, Bison, Chicony, Lite-on) and observe.
      - If you still can't see the Camera under Imaging Devices but you see an Unknown Device,  follow this guide on how to identify it. Once identified, navigate to the C:\drivers\Camera Driver (AVC, Bison, Chicony, Lite-on)\HD folder and install the appropriate driver.
    - Link to picture
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Screen brightness not working after updating windows 10

    My Lenovo g50-70 laptop screen brightness button not working and I also not able to adjust brightness of my laptop.it is fixed at maximum level after updating windows 10. Find a solution for this problem.

    I have the same problem with my HP Pavilion 17-e073ed notebook. As far as I can tell everything seems to be working again BUT the brightness function keys.
    I tried downloading a few of the quick key drivers but they're still not working.

  • Unable to launch X11 after 10.5.5 update

    Greetings,
    After updating to 10.5.5 yesterday, X11 refuses to launch. Maybe a font issue? The console message is as follows:
    9/17/08 11:51:31 AM org.x.startx[3811] font_cache: Scanning user font directories to generate X11 font caches
    9/17/08 11:51:31 AM org.x.startx[3811] font_cache: Making fonts.dir for updated directories.
    9/17/08 11:51:31 AM org.x.privileged_startx[537] font_cache: Scanning user font directories to generate X11 font caches
    9/17/08 11:51:31 AM org.x.privileged_startx[537] font_cache: Updating FC cache
    9/17/08 11:51:31 AM org.x.startx[3811] Couldn't create cookie
    9/17/08 11:51:31 AM com.apple.launchd[242] (org.x.startx[3811]) Stray process with PGID equal to this dead job: PID 3839 PPID 3827 mkfontscale
    9/17/08 11:51:31 AM com.apple.launchd[242] (org.x.startx[3811]) Stray process with PGID equal to this dead job: PID 3827 PPID 1 bash
    9/17/08 11:51:31 AM com.apple.launchd[242] (org.x.startx[3811]) Exited with exit code: 1
    9/17/08 11:51:31 AM com.apple.launchd[242] (org.x.startx) Throttling respawn: Will start in 10 seconds
    9/17/08 11:51:33 AM org.x.privileged_startx[537] font_cache: Done
    It then repeats this suite of messages every 10 seconds. I tried reinstalling XQuartz from http://xquartz.macosforge.org/trac/wiki/X112.3.1, but no luck.
    Thanks for your help...

    I had the same issue after installed 10.5.5. Took me ages to work out what was going on since my problem originated with ssh connections failing to connect. Turned out that ssh was hanging while waiting for X11 to start. X11 wasn't starting automatically or manually but was showing the respawn messages in the console.
    Based on earlier comments in this thread I narrowed down the problem to an exec statement in my original .profile.
    Here is the .profile that I've been using on OS X 10.2 -> 10.5.4:
    <pre>
    if \[ -e /sw/bin/tcsh ]; then
    # We prefer to use the fink installed version of tcsh..
    exec /sw/bin/tcsh
    elif \[ -e /bin/tcsh ]; then
    # ... but we will use the OS X installed version if it exists
    echo "warning: using Apple version of tcsh from /bin/tcsh"
    exec /bin/tcsh
    else
    echo "error: could not find a version of tcsh to exec!"
    echo " dropping to default bash setup (no fink environment)"
    fi
    </pre>
    Nothing exciting there other than the exec statements.
    By wrapping my old .profile in a test to only execute the old .profile statements in interactive shells X11 will start up correctly and I keep my old .profile settings for terminal shells.
    Here is the updated .profile that works with 10.5.5 X11:
    <pre>
    # Only execute if this is an interactive shell...
    if \[ -t 0 ]; then
    if \[ -e /sw/bin/tcsh ]; then
    # We prefer to use the fink installed version of tcsh..
    exec /sw/bin/tcsh
    elif \[ -e /bin/tcsh ]; then
    # ... but we will use the OS X installed version if it exists
    echo "warning: using Apple version of tcsh from /bin/tcsh"
    exec /bin/tcsh
    else
    echo "error: could not find a version of tcsh to exec!"
    echo " dropping to default bash setup (no fink environment)"
    fi
    fi
    </pre>

  • Unable to load pages after update to 3.6.8

    unable to load pages with any browser after update to 3.6.8
    windows update only online function that works

    try this
    download and run norton removal tool. this woked for me
    http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN&ln=en_US

  • Unable to open itunes after update

    unable to open itunes after update

    I had a user with the same issue after updates and I was able to resolve. 
    I copied QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    I did so after uninstalling and re-installin, but I don't beleive that was necesssary.  Thanks to user thurdy.  This fix was from apple support for the error "iTunes stopped working".  Figured I'd give a shot and it ended up working.
    For reference the user was receiving the following errors exactly:
    "the procedure entry point ?fastfree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll"
    and
    "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error127)"

  • Palm Desktop crashes after updating windows

    Palm Desktop crashes on startup since I updated Windows XP (yesterday). Palm Desktop prompts me for password (as set up) but crashes immediately after that which invokes the odious Windows message: "Palm Desktp has detected a problem and must close - send message report?".   I already tried unistalling and reinstalling Palm Desktop without success. Does anybody have any pointers? Thanks in advance. 
    Post relates to: Treo 680 (Unlocked GSM)

    Sounds like your data has been corrupted, possibly your calendar,
    There is a few things to try.
    1. If your default calendar view is the month, I would do this step first. Change your date on your computer to two months in the future or past, then try to relaunch palm desktop. Let me know if it launches and I will tell you how to fix that.
    2. If your default calendar view is not the month, the do this step. Locate your user folder it is in my documents/palm os desktop/variation of hotsync id
    Once you find the hotsync id folder. Grab that and move it to your desktop so it is no longer in the palm os desktop folder. Then try to relaunch palm desktop
    Let me know if either one of these steps let you open palm desktop then we will go into fixing them.
    Post relates to: Centro (Sprint)

  • How to Continue Creating Recovery Disks after Updating Window 8.0 to 8.1

    My laptop is hp 2000-2d62nr notebook pc (energy star) S/N: 5CG342027W
    I might mess up the HP Recover Manager as follow:
    I was attempting to create the recovery disks for the HP Window 8.0 laptop. HP Recovery Manager needed 5 disks. After 2 disks made done, I left my laptop for two hours. Then I returned to my laptop and saw Window to ask me to update Window 8.1.  And I updated it to Window 8.1.
    After Window 8.1 update done, the system had been restarted. When returning to HP Recovery manager, it asked me to continue the third recovery disks. I selected "Continue". However, Disk 3 verified failed at 15%, the pop up window asked me to use another disk and try again. I attempted second times by restart my laptop. again, Disk 3 verified failed at 2%,
    How do I clean this mess and make a 2nd set of recovery disks?
    Thank you for your suggestions.
    Best Regards,
    This question was solved.
    View Solution.

    I called the above phone number. Tech Support told me to charge $40.00 for recovery disks. I complained this and they transfered me to 877-917-4380 to talk with Case Manager. He agreed sending the recovery disks with no charge

  • I can't connect wifi after updating Windows.

    I installed Windows Embedded 8.1 Industry Pro. And I have 49 important updates. But after updating, I can't connect my wifi. Then I restore system, I can connect again. I have did this some times
    Before, I had installed Windows 8.1 Pro, it was the same problem.
    Please tell me solution. My laptop is Acer Aspire m3 481 which is installed Qualcomm Atheros AR5BWB222 wireless driver

    Download the latest drivers for the Wireless network card that are applicable to Windows 8.1.
    You can check with Acer on this. 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.
    I did. but it was not fixed. after updating, I can't connect wifi until I restore current system.

  • IBooks 3 fails to launch even after update

    On my ipad 2, iBooks version 3 still fails to launch after update. This is the first time I can recall Apple failing to fix a material bug. I hope it is working on the problem.

    iBooks is working fine on my iPad 2.
    Lets try first quitting the iBooks app then resetting the iPad.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
    Then reboot your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Maybe you are looking for