Unable to move data from Infooject to another Infoobject in APD

Dear BW experts.
I have data in Infoobject1 with 10 columns and I have another Infooject2 with 11 columns.
I need to move data from infoobject1 to Infoobject2 both have identical fields except for the 11th column. In addition to filling up the common 10 columns, I need to calculate the data on the 11th column based on the previous record for each record. Hence I cannot move data directly from Inobject1 to Infoobject2.
I try to use Analysis Process designer. In this, I could consider Infoobject1 as the source but in the choice of the target, I do not see Infoobect but only see DSO and other objects not relevant for me.
How do I move data from infoobject1 to Infoobject2 using ABAP routine in the APD.
Kindly suggest.
Thanks,
Sai

Hi,.
See usefull Articles in
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Analysis Process Designer (APD)
Analysis Process Designer (APD): Part - 1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f06353dd-1fe3-2c10-7197-dd1a2ed3893e?quicklink=index&overridelayout=true
Analysis Process Designer (APD): Part - 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%20Part%20-%202.pdf
Analysis Process Designer (APD): Part - 3
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%3a%20Part%20-%203.pdf
Thanks
Surendra Reddy

Similar Messages

Move data from alv to another perform

i have an alv, and i make 1 field etidable ( fieldcatalog-edit = 'X'.)
my qa: when i change the field i want to pass it to another itab how???

Hi,
Look at this sample code -:D It uses OO ALV.
code
*& Report Z_DUMMY_ATG
REPORT Z_DUMMY_ATG NO STANDARD PAGE HEADING.
TABLES: SPFLI.
*============================================================
Variables
*============================================================
DATA: OK_CODE TYPE SY-UCOMM,
L_MODE TYPE RAW4,
W_TABIX TYPE SY-TABIX.
*============================================================
Tablas internas
*============================================================
DATA: L_S_LAYO TYPE LVC_S_LAYO.
DATA: WA_EDIT TYPE LVC_T_STYL WITH HEADER LINE.
DATA: IT_EDIT TYPE LVC_T_STYL WITH HEADER LINE.
DATA: BEGIN OF G_WA_SFLIGHT.
INCLUDE STRUCTURE SPFLI.
DATA: CELL_TAB TYPE LVC_T_STYL.
DATA: END OF G_WA_SFLIGHT.
TYPES: BEGIN OF SPFLI_TAB.
INCLUDE STRUCTURE SPFLI.
TYPES: CELL_TAB TYPE LVC_T_STYL.
TYPES: END OF SPFLI_TAB.
TYPES: SPFLI_TABS TYPE STANDARD TABLE OF SPFLI_TAB.
DATA: GI_SFLIGHT TYPE SPFLI_TABS.
DATA: BEGIN OF AUX_TAB OCCURS 0,
CARRID LIKE SPFLI-CARRID,
CONNID LIKE SPFLI-CONNID,
CITYFROM LIKE SPFLI-CITYFROM,
AIRPFROM LIKE SPFLI-AIRPFROM,
CITYTO LIKE SPFLI-CITYTO,
AIRPTO LIKE SPFLI-AIRPTO,
END OF AUX_TAB.
DATA: SPFLI_TAB_WA LIKE G_WA_SFLIGHT.
FIELD-SYMBOLS: SET_TABLE_FOR_FIRST_DISPLAY(
EXPORTING I_STRUCTURE_NAME = 'SPFLI'
IS_LAYOUT = L_S_LAYO
CHANGING IT_OUTTAB = GI_SFLIGHT ).
*============================================================
Dynpro
*============================================================
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
ENDMODULE.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
IF OK_CODE = 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR OK_CODE.
ENDIF.
ENDMODULE.
/code
Greetings,
Raj.

Move data from one table to another table

Hi all,
I had a custom table called sales_data in that table there are columns like JAn,FEB,upto DEC including other columns so in each month there is some data total data is 23000 count but each month has has specific data like JAn-2500,FEB-2000 like that it has total 23000 records
My Requirement is i have to move data from one table to another table that too if i will pass jan only jan data should move like that feb,march,.....
in my table there is no month column i had get it from another table called gl_periods and by using cursor and case function i have written the code
well while when i am inserting data am passing year,month as parameters but 23000 data is moving it should get like that.
Please suggest me.its urgent
Thank You

Hi hamid,
               Please go through the below procedure.
CREATE OR REPLACE PROCEDURE APPS.copy_sales_to_forecast(p_fiscal_year varchar2,p_month number)
IS
CURSOR C1 IS select period_year,period_num,start_date,end_date from apps.gl_periods
             where period_set_name='Accounting'
             and   period_year=p_fiscal_year
             and   period_num<=p_month;
type type1 is table of xxc_forecast_data%rowtype;
t1 type1;
BEGIN
FOR CREC IN C1 LOOP
BEGIN
DELETE FROM xxc_forecast2
where fiscal_year = crec.period_year
and attribute1='Copied From Sales to Forecast Table of Month '||crec.period_num;
END;
SELECT
product_category           ,
product_sub_category       ,
product_line               ,
product_style              ,
item_number                ,
item_description           ,
customer_name              ,
customer_number            ,
sales_channel              ,
null      ,
CASE
    WHEN crec.period_num=1 THEN sales_amount_month1
    ELSE 0
END Transaction_quantity_period1,
CASE
    WHEN crec.period_num=1 THEN sales_cost_month1
    ELSE 0
END item_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_mtl_cost_month1
    ELSE 0
END item_material_cogs_period1 ,
CASE
    WHEN crec.period_num=1 THEN sales_mtl_ovhd_cost_month1
    ELSE 0
END item_mtl_ovhd_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_res_cost_month1
    ELSE 0
END item_resource_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_op_cost_month1
    ELSE 0
END item_op_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_ovhd_month1
    ELSE 0
END item_ovhd_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_units_month1
    ELSE 0
END extended_amount_us_period1,
CASE
    WHEN crec.period_num=2 THEN sales_amount_month2
    ELSE 0
END Transaction_quantity_period2,
CASE
    WHEN crec.period_num=2 THEN sales_mtl_cost_month2
    ELSE 0
END item_material_cogs_period2,
CASE
    WHEN crec.period_num=2 THEN sales_mtl_ovhd_cost_month2
    ELSE 0
END item_mtl_ovhd_cogs_period2,
CASE
    WHEN crec.period_num=2 THEN sales_res_cost_month2
    ELSE 0
END item_resource_cogs_period2,
CASE
    WHEN crec.period_num=2 THEN sales_op_cost_month2
    ELSE 0
END item_op_cogs_period2,
CASE
    WHEN crec.period_num=2 THEN sales_ovhd_month2
    ELSE 0
END item_ovhd_cogs_period2,
   CASE
    WHEN crec.period_num=2 THEN sales_units_month2
    ELSE 0
END extended_amount_us_period2,
CASE
    WHEN crec.period_num=3 THEN sales_amount_month3
    ELSE 0
END Transaction_quantity_period3,
CASE
    WHEN crec.period_num=3 THEN sales_mtl_cost_month3
    ELSE 0
END item_material_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_mtl_ovhd_cost_month3
    ELSE 0
END item_mtl_ovhd_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_res_cost_month3
    ELSE 0
END item_resource_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_op_cost_month3
    ELSE 0
END item_op_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_ovhd_month3
    ELSE 0
END item_ovhd_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_units_month3
    ELSE 0
END extended_amount_us_period3,
CASE
    WHEN crec.period_num=4 THEN sales_amount_month4
    ELSE 0
END Transaction_quantity_period4,
CASE
    WHEN crec.period_num=4 THEN sales_mtl_cost_month4
    ELSE 0
END item_material_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_mtl_ovhd_cost_month4
    ELSE 0
END item_mtl_ovhd_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_res_cost_month4
    ELSE 0
END item_resource_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_op_cost_month4
    ELSE 0
END item_op_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_ovhd_month4
    ELSE 0
END item_ovhd_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_units_month4
    ELSE 0
END extended_amount_us_period4,
CASE
    WHEN crec.period_num=5 THEN sales_amount_month5
    ELSE 0
END Transaction_quantity_period5,
CASE
    WHEN crec.period_num=5 THEN sales_mtl_cost_month5
    ELSE 0
END item_material_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_mtl_ovhd_cost_month5
    ELSE 0
END item_mtl_ovhd_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_res_cost_month5
    ELSE 0
END item_resource_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_op_cost_month5
    ELSE 0
END item_op_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_ovhd_month5
    ELSE 0
END item_ovhd_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_units_month5
    ELSE 0
END extended_amount_us_period5,
CASE
    WHEN crec.period_num=6 THEN sales_amount_month6
    ELSE 0
END Transaction_quantity_period6,
CASE
    WHEN crec.period_num=6 THEN sales_mtl_cost_month6
    ELSE 0
END item_material_cogs_period6,
CASE
    WHEN crec.period_num=6 THEN sales_mtl_ovhd_cost_month6
    ELSE 0
END item_mtl_ovhd_cogs_period6,
CASE
    WHEN crec.period_num=6 THEN sales_res_cost_month6
    ELSE 0
END item_resource_cogs_period6,
CASE
    WHEN crec.period_num=6 THEN sales_op_cost_month6
    ELSE 0
END item_op_cogs_period6,
CASE
    WHEN crec.period_num=6 THEN sales_ovhd_month6
    ELSE 0
END item_ovhd_cogs_period6,
   CASE
    WHEN crec.period_num=6 THEN sales_units_month6
    ELSE 0
END extended_amount_us_period6,
CASE
    WHEN crec.period_num=7 THEN sales_amount_month7
    ELSE 0
END Transaction_quantity_period7,
CASE
    WHEN crec.period_num=7 THEN sales_mtl_cost_month7
    ELSE 0
END item_material_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_mtl_ovhd_cost_month7
    ELSE 0
END item_mtl_ovhd_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_res_cost_month7
    ELSE 0
END item_resource_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_op_cost_month7
    ELSE 0
END item_op_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_ovhd_month7
    ELSE 0
END item_ovhd_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_units_month7
    ELSE 0
END extended_amount_us_period7,
CASE
    WHEN crec.period_num=8 THEN sales_amount_month8
    ELSE 0
END Transaction_quantity_period8,
CASE
    WHEN crec.period_num=8 THEN sales_mtl_cost_month8
    ELSE 0
END item_material_cogs_period8,
CASE
    WHEN crec.period_num=8 THEN sales_mtl_ovhd_cost_month8
    ELSE 0
END item_mtl_ovhd_cogs_period8,
CASE
    WHEN crec.period_num=8 THEN sales_res_cost_month8
    ELSE 0
END item_resource_cogs_period7,
CASE
    WHEN crec.period_num=8 THEN sales_op_cost_month8
    ELSE 0
END item_op_cogs_period8,
CASE
    WHEN crec.period_num=8 THEN sales_ovhd_month8
    ELSE 0
END item_ovhd_cogs_period8,
CASE
    WHEN crec.period_num=8 THEN sales_units_month8
    ELSE 0
END extended_amount_us_period8,
CASE
    WHEN crec.period_num=9 THEN sales_amount_month9
    ELSE 0
END Transaction_quantity_period9,
CASE
    WHEN crec.period_num=9 THEN sales_mtl_cost_month9
    ELSE 0
END item_material_cogs_period9,
CASE
    WHEN crec.period_num=9 THEN sales_mtl_ovhd_cost_month9
    ELSE 0
END item_mtl_ovhd_cogs_period9,
CASE
    WHEN crec.period_num=9 THEN sales_res_cost_month9
    ELSE 0
END item_resource_cogs_period7,
CASE
    WHEN crec.period_num=9 THEN sales_op_cost_month9
    ELSE 0
END item_op_cogs_period9,
CASE
    WHEN crec.period_num=9 THEN sales_ovhd_month9
    ELSE 0
END item_ovhd_cogs_period9,
   CASE
    WHEN crec.period_num=9 THEN sales_units_month9
    ELSE 0
END extended_amount_us_period9,
CASE
    WHEN crec.period_num=10 THEN sales_amount_month10
    ELSE 0
END Transaction_quantity_period10,
CASE
    WHEN crec.period_num=10 THEN sales_mtl_cost_month10
    ELSE 0
END item_material_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_mtl_ovhd_cost_month10
    ELSE 0
END item_mtl_ovhd_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_res_cost_month10
    ELSE 0
END item_resource_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_op_cost_month10
    ELSE 0
END item_op_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_ovhd_month10
    ELSE 0
END item_ovhd_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_units_month10
    ELSE 0
END extended_amount_us_period10,
CASE
    WHEN crec.period_num=11 THEN sales_amount_month11
    ELSE 0
END Transaction_quantity_period11,
CASE
    WHEN crec.period_num=11 THEN sales_mtl_cost_month11
    ELSE 0
END item_material_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_mtl_ovhd_cost_month11
    ELSE 0
END item_mtl_ovhd_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_res_cost_month11
    ELSE 0
END item_resource_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_op_cost_month11
    ELSE 0
END item_op_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_ovhd_month11
    ELSE 0
END item_ovhd_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_units_month11
    ELSE 0
END extended_amount_us_period11,
CASE
    WHEN crec.period_num=12 THEN sales_amount_month12
    ELSE 0
END Transaction_quantity_period12,
CASE
    WHEN crec.period_num=12 THEN sales_mtl_cost_month12
    ELSE 0
END item_material_cogs_period12,
CASE
    WHEN crec.period_num=12 THEN sales_mtl_ovhd_cost_month12
    ELSE 0
END item_mtl_ovhd_cogs_period12,
CASE
    WHEN crec.period_num=12 THEN sales_res_cost_month12
    ELSE 0
END item_resource_cogs_period12,
CASE
    WHEN crec.period_num=12 THEN sales_op_cost_month12
    ELSE 0
END item_op_cogs_period12,
CASE
    WHEN crec.period_num=12 THEN sales_ovhd_month12
    ELSE 0
END item_ovhd_cogs_period12,
    CASE
    WHEN crec.period_num=12 THEN sales_units_month12
    ELSE 0
END extended_amount_us_period12,
CASE
    WHEN crec.period_num=2 THEN sales_cost_month2
    ELSE 0
END item_cogs_period2,
   CASE
    WHEN crec.period_num=3 THEN sales_cost_month3
    ELSE 0
END item_cogs_period3,
   CASE
    WHEN crec.period_num=4 THEN sales_cost_month4
    ELSE 0
END item_cogs_period4,
   CASE
    WHEN crec.period_num=5 THEN sales_cost_month5
    ELSE 0
END item_cogs_period5,
CASE
    WHEN crec.period_num=6 THEN sales_cost_month6
    ELSE 0
END item_cogs_period6,
CASE
    WHEN crec.period_num=7 THEN sales_cost_month7
    ELSE 0
END item_cogs_period7,
   CASE
    WHEN crec.period_num=8 THEN sales_cost_month8
    ELSE 0
END item_cogs_period8,
CASE
    WHEN crec.period_num=9 THEN sales_cost_month9
    ELSE 0
END item_cogs_period9,
   CASE
    WHEN crec.period_num=10 THEN sales_cost_month10
    ELSE 0
END item_cogs_period10,
   CASE
    WHEN crec.period_num=11 THEN sales_cost_month11
    ELSE 0
END item_cogs_period11,
CASE
    WHEN crec.period_num=12 THEN sales_cost_month12
    ELSE 0
END item_cogs_period12,
a.fiscal_year   ,
a.budget_entity ,
a.organization_code,
a.customer_id ,
a.inventory_item_id ,
NULL,
NULL,
a.created_by ,
a.last_updated_by ,
a.creation_date ,
a.last_update_date ,
'Copied From Sales to Forecast Table of Month '||crec.period_num,
a.attribute2,
a.attribute3 ,
a.attribute4 ,
a.attribute5 ,
a.attribute6 ,
a.attribute7 ,
a.attribute8 ,
a.attribute9 ,
a.attribute10,
a.attribute11,
a.attribute12,
a.attribute13,
a.attribute14,
a.attribute15
bulk collect into t1
FROM xxc_sales_data a
where a.fiscal_year          = crec.period_year
having CASE
             WHEN crec.period_num=1 THEN sum(sales_amount_month1)
             WHEN crec.period_num=2 THEN sum(sales_amount_month2)
             WHEN crec.period_num=3 THEN sum(sales_amount_month3)
             WHEN crec.period_num=4 THEN sum(sales_amount_month4)
             WHEN crec.period_num=5 THEN sum(sales_amount_month5)
             WHEN crec.period_num=6 THEN sum(sales_amount_month6)
             WHEN crec.period_num=7 THEN sum(sales_amount_month7)
             WHEN crec.period_num=8 THEN sum(sales_amount_month8)
             WHEN crec.period_num=9 THEN sum(sales_amount_month9)
             WHEN crec.period_num=10 THEN sum(sales_amount_month10)
             WHEN crec.period_num=11 THEN sum(sales_amount_month11)
             WHEN crec.period_num=12 THEN sum(sales_amount_month12)
            END !=0;
FORALL i IN t1.first .. t1.last
INSERT INTO xxc_forecast2 VALUES t1(i);
--commit;
END LOOP;
END;
Thank You

Move data from one fs to another from a particular position.

Hi all,
i have a requirement where i want to move data from one field symbol to another from a particular
position.
I have a work area which contains string values. i have converted this string to hexadecimal value .
in this hex string m lukin for a position where '0A' occurs. Now i have to pick the string till dis '0A' value and move it to some other field symbol. Can anybody tell me how to do that.
The code i have written is as follows:
FIELD-SYMBOLS: <fs> TYPE x.
             data: temp1 type string,
                   p_word type string,
                   temp2 TYPE string,
                   w_len TYPE i.
                   temp1 = wa_value-value. "this wa containd the value
                   w_len = strlen( temp1 ).
         if temp1 cp '"*'.
           ASSIGN wa_value-value TO <fs> CASTING TYPE x. " converting wa to hex value
              DATA: VAR TYPE i,
                    COUNTER TYPE i,
                    line_feed_count type i,
                    temp_count type i.
         VAR = strlen( wa_value-value ).
         CLEAR: COUNTER, temp_count, line_feed_count.
           WHILE COUNTER LE VAR.
            IF <fs>+counter(1) = '0A'.
            line_feed_count = line_feed_count + 1.
            COUNTer = COUNTer + 1.
            ENDIF.
            COUNTER = COUNTER + 1.
           ENDWHILE.
        endif.
Now , i want to pick data from starting till the position it gets '0A' and then again till it finds another '0A'.
Thanks in advance.

Hi,
As everyone has rightly pointed out, there is no direct way of transferring the data from one appset to another. However, there are definitely few ways of doing it:
1. Run export package. Export the data in flat file. Import the data using import DM package.
2. Export the data from the cube of your application in excel file. Then run the import DM package to load the data.
3. Run UJBR transaction in SAP. Take the backup of the transactional data. You will get few flat files. Run the import DM package.
All the above steps will work only if the structure of the applications in both the appsets is the same. Otherwise, you will have to modify the flat file before uploading the file.
Hope this helps.

Move data from one Application to another Application.

Hi All,
I have a requirement to move data from one Application to another Application(we are working on SAP BPC 5.1/7.1 MS version).
Can anybody please mention all the possible ways to achieve it.
Thanks in advance.
Regards
Vani

Hi,
The best way to do this would be to use destination_app statement. Please refer to the below link from help.sap:
http://help.sap.com/saphelp_bpc75/helpdata/en/79/b299446e02478fa5eca684d1297ef3/content.htm
Alternatively, you can definitely export the data from one application and import it to the second.
Hope this helps.

Move data from one member to another existing member

Can someone please advise how I can move data from one member to another existing member? For example, I have data in member ID MT_160 and I want to move this data over to an existing member MT_130 as per business requirement. How can I accomplish this? I tried using the NEWID field but system complained that the new ID must be Unique, which makes sense. I'm stuck now. Any Ideas? I'm using BPC version 5.0 on Microsoft.
Thanks.

David,
one of the ways you can achieve the desired result is Via BPC Excel
1) from menu Edata--> RUn Package --> copy/Move . OR
2) You an write Script logic to Copy/Move data.
Hope this helps..

ABAP Function Module Example to move data from one Cube into Another

Hi experts,
Can any please help out in this ..?
A Simple ABAP Function Module Example to move data from one Cube into Another Cube
(How do i send the data from one client to another client using Function moduel).
Thanks
-Upen.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again, BI related? ("cube"), also search for information before asking.
Edited by: Thomas Zloch on Oct 29, 2010 1:19 PM

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

Best LKM to move data from with in Oracle from one schema to another Schema

Hi Gurus,
What is the best KM to move data from one schema to another schema within same oracle database.
Thanks in advance

Dear,
If your source and target are on the same database server then you dont need LKM.
You have to 1. create one data server for the database server
2. Create one physical schema for your source and another physical schema for your target under the above created data server.
3. Then create models for each above created physical schema
In this case you just need IKM knowledge module
Please refer http://oditrainings.blogspot.in/2012/08/odi-interface-source-target-on-same.html
If your source and target are on different server then you must create two different data servers in topology. You have to use LKM.
The best LKM to use is LKM oracle to Oracle dblink. But you should have proper grants to use it
If your source has very few records you can go with LKM SQL to Oracle other wise use LKM oracle to Oracle dblink

Move data from one table to another

Hi,
I need to move data from work space -1 to work space -2. I need to move only selected data. From work space -1 to work space -2
Work space -1
Table -1_
ID NAME Description
1 xyz one
2 abc two
3 mnk three
Table -2_
ID PID NAME Description
1 1 x1 -
2 1 x2 -
3 2 a1 -
4 2 a2 -
5 3 m1 -
Table -1 is parent table and Table-2 is child. Here PID is parent key of table-1 and ID's in both the table are primary keys.
Now i need to move data from work space-1 to work space -2
Work Space -2 table structure
Table - 1
ID INDUSTRY_TYPE DATE DESC
1 TNT - -
2 MTN - -
Table - 2
ID T_ID NAME DATE DESC
1 1 T1 - -
1 1 T2 - -
2 2 E1 - -
2 2 E3 - -
I need to migrate data from work space -1 of table 1 and 2 to work space - 2 of table 1 and tabe 2
Please suggest me a query to migrate. Please let me know if the steps mentioned above is not clear.
Thanks
Sudhir

Hi Sudhir,
since data tables are not located in work-areas but in schema's I presume you mean the latter.
A simple conversion statement would be something like :
insert into table s1.newtable ( column1, column2, ... )
select column1a, column2a, ...
from s2.oldtable
where ...
First the master table, then the child table.
This works using a user-id having al least read-access to schema s2. If no such user exists then use some export method.
No relation to APEX though.
Hope this helps.
Daniel

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

I have an old Mac Tower. I need to move data from the unit to an external hard drive. What kind of hard drive do I purchase. There is not a lot of data to be transferred.

I have an old Mac Tower. I need to move data from the unit to an external hard drive. What kind of of hard drive must I purchase so that it works with the Tower? There is not a lot to transfer.

MG,
What we might need to do is to change the question. What computer do you plan to use the data on in the future? For example, if you have a newer tower, just move the hard drive to the new tower. If you want to use the data, what about an ethernet LAN to get the data over? If you want to archive the data, how do you store the second drive? What are your plans for the first drive? If the new software will not recognize the old file type, the data must be exported. Just getting files to another hard drive will not finish your journey.
As Allan said, knowing the exact model and year of your tower is important. My suggestion is to find a user group near you. Please post back with more information, including the name of a large city near you.
For example, our user group just experimented with a 1983 Apple IIc that predates the Mac. It started right up, read files from 1984 and saved them from a 5.25" floppy to a 3.5" floppy. That 3.5 floppy will go into a platinum G3 which will read PRODOS files using Apple File Exchange. That G3, with a USB card, will allow saving the files to a USB flash drive. But, somewhere along the way, some software has to read the file and convert it to data that is useable by current software.
Ji~m

Best way to move data from page to page inside app

Hi all I started writing this and it got way to complicated to explain in full without a novel.
Breif description. I am using query string that starts in the parent window (from href in json file) it then has to be moved into the iframe url when moving to other pages to avoid security as page and iframe are conflicting http and https. and cannot be accessed.. it seems there must be a better way.
So my question is what is the best way in open platform to move data from one page to another?

Hi Liam
Small data just a webapp ID and I am using the URL. But if you pass a ID say from Json ie "href":"/Admin/AppLoader.aspx?client_id=dev-name&ID=111111" it gets passed to the page url. This can be referenced using document.referrer initially. As the app is inside another frame and url that is https there is security issue using parent.location between https and http. Fine but then if you move to a new page referrer is no longer as there is no real referrer and you have to use location but you cannot. Now the work around is to pass the value from the page url to the app url at the start. and then you get around http https security issue when using parent.location but this seems convoluted and like a work around. Is this really the only way or the best way or a bad way. without using other ways that seem over kill for 6 odd characters.

Best way to move data and programs to another profile on same Mac?

Hello,
What is the best way to move data and programs to another profile on the same Mac? I have a user who's profile is corrupt, I know that most programs will work on both the new and old profile however when trying to copy the Desktop folder, or Documents folder I am getting permissions denied.
Sort of like weeding a garden, I'm hoping I do not have to pick the data in each folder and copy individually.
Thanks for your help!
Johnathon

This usually means that a configuration or preference file is corrupted. In this user's /Home/Library/Preferences/ folder locate any preference files associated with iLinc and drag to the Trash.
I would also check in the /Home/Library/Caches/ folder for a file or folder associated with iLinc and delete as well.
See if the problem is resolved in the user's normal account.
It's not that you cannot copy data from account to account, but doing so causes a lot of permissions issues that must be resolved. The MacFixit article I linked above shows what you need to do after transferring from one account to another in order to change permissions on the "foreign" files to those of the destination account.

Move data from 1:1 to M:M

I have 2 table. one is s_org_ext and another one is s_org_ext_x. Relationship between the two table has 1:1
Table 1:
Column: Row_id,Name.
Table 2:
Column: Row_id,BI_Application,Par_Row_id(Foreign key of Table 1).
My UI layer displayed recors as follows.
Name(S_org_ext) | BI Application(S_org_ext_x)
|
IBM | Cog
Oracle | Siebel
But now i need to column BI_Application from another table s_org_ext_XM (Third table). So I successfuly configured 1:M relationship. But now i want get the values from second table (s_org_ext_x with 1:1) column (BI_Application) to
third table (S_org_ext_XM with 1:M) column (BI_Application)
Let me know, if u know ease way to move data from 1:1 to 1:M.
Thanks
Pandiarajan

You can define third table S_org_ext_XM with will be having row_id from s_org_ext and row_id from s_org_ext_x like
create table S_org_ext_XM (s_org_ext_row_id, s_org_ext_x_row_id) as
select
     t1.row_id,
     t2.row_id
from
      s_org_ext t1,
      s_org_ext_x t2
where
     t1.row_id = t2.par_row_id You can also put the composite primary key on that both columns.

Unable to capture data from drop down list in custom added field in migo tcode at item level

Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.

Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
    values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
    values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
    APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = '<SCREEN INPUT FIELD NAME>'
      values          = values[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
        <inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected

Unable to move data from Infooject to another Infoobject in APD

Similar Messages

Maybe you are looking for