Unable to run ADF Project Using with Jdev 10 and Weblogic server 9.2

Dear All,
I am unable to run ADF Project on Weblogic Server 9.2. I am created Sample Project with ADF Control. This was when we create jsp at that time i am selected libraries ADF. After created war file. This war i am deploying into Server. At that time i am getting error java.lang.noclassfound error.
so please tell me how we can run these application.
Regards,
Suresh.V

Hard to help you here. JDev 10 used to work with OAS 10g as application server. This does not mean that you can't use Weblogic9.2, but because it is not the default configuration you may have some problems doing this.
One problem is that you need to install the ADF runtime libraries in the WLS 9.2 server, but there is no installer I know of. You can try to deploy the needed libraries together with your app, but you have to figure out which libraries you need.
Next thing is that you should deploy an EAR instead of a WAR.
Timo

Similar Messages

  • Running a SSIS package with SQL Job and Linked Server

    I have a SSIS 2008 package. In one of the Script task I am calling a stored procedure which is  using Openquery using linked server. I deployed this package with protection level as "EncryptWithPassword" and gave a password to the package.
    Created a SQL job and edited its command line to include the password. If I login to SQL Server Mgmt Studio with Windows Authentication and run the job manually it runs fine. But when I schedule it then I get an error that "The Communication link to Linked
    server failed".
    Please help 

    Hi Vivek.B,
    The issue should occur because the SQL Server Agent Service Account or SQL Agent Proxy account under which the job step runs doesn’t have sufficient permissions on the linked server.
    If the job owner is the sysadmin fixed server role, the job can be run under the SQL Server Agent Service Account or a proxy account, then please make sure the SQL Agent Service Account or the proxy account has corresponding login on the linked server. If
    the job owner is not a sysadmin fixed server role, the job must run under a proxy account. In this case, make sure the proxy account has a corresponding login on the linked server.
    Reference:
    http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/10/13/who-owns-my-job-and-who-runs-it.aspx
    Regards,
    Mike Yin
    TechNet Community Support

  • Urgent: Unable to run JSP pages(using JRun Custom Tags) in Weblogic 5.1

    Hi,
    I am using JRun Custom tags to bulid JSP pages.
    Could not run the jsp page on Weblogic 5.1.
    I could run the same on JRun Server but not on Weblogic?.
    Had placed JRuntags.jar in the web_inf directory.
    What/where i need to update in properties file?.
    Please reply..
    Best Wishes.
    Satish k.Yalamaddi.

    javax.servlet.ServletException: com/sun/tools/javac/Main (Unsupported major.minor version 49.0)
    This is your problem either your tomcat or eclipse is pointing to a wrong jre
    here the problem is you are trying to run a code that was compiled using j2sdk1.5 in j2sdk1.4

  • CAC or smart card use with Oracle database and web server

    I've been asked to smart card (CAC) enable our Oracle web server and database access. We currently use CAC to access many of our other applications.
    Where can I find the following information
    Oracle software required (and is it an additional cost)
    How to integrate Oracle App server (web server) with CAC.
    How would I need to change the database users accounts to be CAC enabled rather than database users accounts.
    Thanks
    steven jackson
    [email protected]
    614-692-9768

    Virtualisation is not certified for Oracle RAC on Windows.
    +Certified Software on Oracle VM [ID 464754.1]+ note states:
    Oracle Real Application Clusters (RAC)
        Oracle 10.2.0.4 and up (10gR2) and 11.1.0.7 and up (11gR1) and 11gR2 RAC for Linux x86 and Linux x86_64 certified on Oracle VM
            Guest OS: Oracle Linux 5.1 (and above) RHEL 5.1 (and above) for Linux x86 / Linux x86_64
            Paravirtualized (PV) mode only (Guest OS and drivers)
            Only supported on Oracle VM 2.1.2 and above
            Live-migration of an Oracle RAC VM is supported with Oracle VM 2.2.1 and above.
            Previous versions are not supported. Please refer to this link for best practices.
            Over-committing CPUs is not recommended, but supported with the following restrictions:
                The total amount of VCPUs allocated to guest domains (running Oracle RAC guests), should not exceed
                two times (2x) the amount of real CPUs / cores in the Oracle VM server.
                The amount of VCPUs allocated to a single guest domain should not exceed the amount of real CPUs /
                cores in the Oracle VM server.
                Maintain Oracle VMs default VCPU allocation for dom-0: Oracle VM will allocate 1 VCPU for each real CPU or core to dom-0.
                CPU pinning is only recommended for hard partitioning. If no hard partitioning is required, CPU pinning should not be used.
            Static support only (dynamic support is being planned):
                Dynamic resizing of guest virtual machine is not supported (VCPU, memory and I/O)
                Virtual Machine Pause/Restore of an active Real Application Cluster virtual machine is not supported.

  • What application server to be used with JDev 10.1.3.4 applications

    To experts and anybody who know
    Hi,
    I am completely new to application servers. We have an application developed using JDeveloper 10.1.3.4 that needs to be deployed. We have not used any Oracle's application servers yet, and need to choose one. We have in our mind that some day we will use JDeveloper 11 for development. The issue is to choose the right server software.
    As far as we know there are Oracle Application Server and Weblogic Server (when you download JDeveloper 11 it seems Weblogic server bound to it). And these servers have different versions. We want to choose one that is compatible with both applications developed using JDev 10.1.3.4 and those developed using JDev 11 in the future.
    Any advice what server and what version to choose? We will run the server on Solaris unix platform.
    Many thanks for your advice!
    Newman

    This question is probably best asked in the JDeveloper forum.
    JDeveloper and ADF
    JDeveloper 10g should be able to do deployments to certain WebLogic versions, but it depends on what kind of application you are developing. When you write your post on the JDev forum, I suggest you describe the applications that you are developing and what features they use. For example, are these applications based on ADF?

  • What is JSF version of Oracle ADF that come with Jdev 10.1.3.1.0

    HI
    tahank you for reading my post
    which version of JSF used in oracle ADF that comes with jdev 10.1.3.1 ?
    thanks

    JDeveloper ships with JavaServer Faces (JSF) Reference Implementation 1.1_01
    Hope this helps
    Regards
    Grant Ronald
    oracle Product management

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

    My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

    Kbkohn wrote:
    I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back. 
    Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged.  Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
    Have you done so?  If you have, all of the data is either in iCloud or iTunes on your computer.  Replace the device and restore the new iDevice with the backup of the old one.

  • Which iMac for use with Photoshop CS5 and Lightroom

    Any opinions on which iMac is best for use with Photoshop CS5 and Lightroom. Not sure if the 2.7 i5 with 512 graphics card is Plenty of power or if upgrading to the 3.1 i5 or 3.4 i7 is a wiser choice given the price differences. Appreciate the help

    So I was reading over your post, and even though this is older and has to do with CS5, I have some information for CS6 that will be relevant to your question now that it is time to upgade the software. In general Photoshop has always been more about RAM than Processing power, though that is important too. Until CS5 it could never quite take advantage of what multi-core processors really had to offer, and even the graphics card didn't really effect much of it outside of certain features and the 3D optio
    Now that is no longer true and Adobe can effeciently use all aspects of the computer to give you much better performance.
    So much so that I was able to buy a brand New ASUS with the following specs:
    Dual Core 2.2GHz Processors
    8GB of RAM (4GB original to the machine)
    Windows 7 Home Premium 64Bit OS
    320GB HDD w/ 5400RPM
    This machine not only runs photoshop CS6 and Launches in less than 5 Seconds... it can run Premier and After Effects as well, and this Laptop cost me less than $400 (on sale at Best Buy 2 Weeks Ago. You don't have to buy something this cheap, but isn't it great that you can and still run Master Collection effectively?
    You can read my details on how to buy a Photoshop CS6 Laptop, what specs you need, comparison between Mac and PC and watch the video of my Photoshop Speed Test by reading this article:
    http://robertoblake.com/blog/2012/06/buying-a-photoshop-cs6-laptop

  • I have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

    i have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

    You need to get headset splitter adapter.
    http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Position-to-2x-3- Position-35mm-Headset-Splitter-Adapter-Male-to-Female~MUYHSMFF

  • Partitioning an External 320gb drive for use with Time Machine and...

    I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
    Is this possible?
    I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
    Has anyone done this before?
    Cheers-

    Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
    See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

  • Can I use my same itunes that I use with my iphone and sync it to my ipad?

    Can I use my same itunes that I use with my iphone and sync it to my ipad? That is, can I sync all my existing apps, etc that i use on my iphone to my ipad, without messing anything up?

    Yes.
    iPhone apps will not be able to use the full screen resolution, but most if not all will work.

  • Problem with a  web service with Jbuilder 2005 and Weblogic 8.1

    Hi,
    i�m trying to create a web-service using Jbuilder 2005 Enterprise and Weblogic 8.1. It is a very simple web-service, come kinda "Hello World".
    In the last step, after deploying my "ApplicatioModule1", i get this error:
    "Unable to connect to server t3://localhost:7001 as user weblogic.
    Reason: javax.naming.CommunicationException. Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is:
         java.net.ConnectException: Connection refused: connect; No available router to destination
         at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:199)
         at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:125)
         at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:291)
         at weblogic.jndi.Environment.getContext(Environment.java:164)
         at weblogic.jndi.Environment.getInitialContext(Environment.java:143)
         at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(MBeanHomeTool.java:157)
         at weblogic.Deployer.runBody(Deployer.java:555)
         at weblogic.utils.compiler.Tool.run(Tool.java:146)
         at weblogic.utils.compiler.Tool.run(Tool.java:103)
         at weblogic.Deployer.main(Deployer.java:399)
    Check option -adminurl, -username and -password. "
    I dont know why i get this error. I think the weblogic server is properly configured and running.
    Anybody can help me?? Thx.

    i have found the solution to the problem myself. I only had to execute this command file startWebLogic.cmd which is placed in this default installation directory C:\bea\user_projects\domains\mydomain in order to put the server listening to ports.
    i hope anybody with the same problem could fix it by reading this post.

  • Can we run the application developed in 11g on a weblogic server of 10g

    Hi all,
    I developed an application in Jdeveloper 11.1.1.4.0 version. Can I use the same application
    on Weblogic server of 10.3 version with out changing any thing or Do I need to change
    something for the deployment? Kindly come up with your help
    Thanks,
    Phanindra.

    A bit more info http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/
    Timo

  • Steps to UTF-8 Encoding with Oracle 8i and Weblogic 6.1SP1

    What are the Steps to UTF-8 Encoding with Oracle 8i and Weblogic
              6.1SP1?
              I have:
              - Oracle 8.1.5 database created with character set=UTF8 and national
              character set=UTF8
              - Weblogic 6.1SP1 without any encoding mechanism set
              (though I did play with
              <jsp-param><param-name>encoding</param-name>
              <param-value>UTF-8</param-value>
              </jsp-param>
              in the weblogic.xml for a while though it seemed not to make a
              difference)
              - JSP pages set to content='text/html; charset=UTF-8'
              - JSP form POSTs set to enctype="UTF-8"
              I can copy and paste Chinese Kanji from a UTF8 encoded web page into
              form text boxes but when I post the data it comes back as different
              Kanji. Then once it is posted the Kanji stays the same on repeated
              posts. The same Kanji text also looks different when viewed in a form
              text box than when viewed as straight text on the page.
              Is there anything else? Or am I already encoding characters twice?
              Please help!
              Mel Christie
              

    Hi Experts,
    Please correct me if am asking you the question in wrong way.
    I have ARCGIS with oracle database 10gr2 in production server.
    My work is to connect AUTOCAD S/W (client computer which is connected in LAN) to ARCGIS in order to access the toposheets available in SDE user.
    When iam trying to connect iam getting this error:The specified credentials are not valid or provider is not able to establish a connection.
    I checked the path to production server by pinging and user/passcode too but not helpful.
    Please help me in this , very urgent.
    Thanks.
    Edited by: user13355644 on Jul 3, 2010 3:53 AM
    Edited by: user13355644 on Jul 22, 2011 2:55 AM

Maybe you are looking for