Unable to see all the dimensions in EPM reporting

Hi Friends,
I have created a Dimensions(category,entity,account,inputcurrency,time,Customer1,Product)
At reporting level
I have created connections.When I checked the available dimensions in EPM Pane....I could not
see Customer, and Product dimension.
Just to test I have taken the available dimensions in EPM pane for validating the transformations.But validation
it fails. As it is pointing towards the missing dimensions of BPC.
Hence required your assistance
1.Why the dimensions are not available at reporting side.Do I need to set some parameters for enabling ?
2.If I don't want to map some fields of source to available dimensions in BPC. would it have any problem
Is it mandatory to map all the source field to BPC objects?
Please assist
Thanks in advance

Hi,
I have check the access details everything is Ok. Would like to know do they have any issues with "User defined dimension".
Regards

Similar Messages

HI,I am unable to see all the tabs in ACC, getting the following error

I am unable to see all the tabs in ACC, getting the following error.
ERROR [ComponentAgent] Request for URL:
http://sathya-PC:8080/dyn/init-session did not return a valid session.
Please check your settings for siteHttpServerName, siteHttpServerPort,
webApplicationPrefix and initSessionURL for component
/atg/devtools/DevSessionManager/_2/atg/devtools/ComponentAgent
serverport : 8860
servername : localhost
Note:I included DCS in Manifest and Run the DCS in SQL
Please Help me out from this issue
Thanks

Verify and chage if required.
Ports are configure at /atg/dynamo/Configuration component,
httpPort , httpsPort , drpPort , fileDeploymentPort , rmiPort , fileSychronizationDeploymentPort , adminPort , siteHttpServerPort
Noramly :
siteHttpServerPort and adminPort: app server port
Thanks,
Nitin.

Unable to see all the service of ES Bundle after EHP4

Hello All,
We have upgraded to ERP 6.0 EhP4.
I wish to use the services available in ES Bundle "External Cash Desk"
https://wiki.sdn.sap.com/wiki/display/ESpackages/ExternalCashDeskEnterpriseServices
But when I open SOAMANAGER and try to search with query as "cash", I am able to see only 1 service in the namespace http://sap.com/xi/FICA/Global i.e. "CashPointOpenItemSummaryByElementsQueryResponse_In".
Please tell me if there is any other way to search for the service.
Do let me know why am I not able to see all the services.
regards,
Piyush

Hi Piyush,
>Can you also tell me that can we call synch and asynch services without PI in the landscape
Sync service is like any other webservice which work over http and using SOAP protocol so calling Sync service is not issue even w/o PI.
On other hand Async services need some sort of middleware as they are not real time and often need integration with thridparty/legacy interfaces hence they need PI to manage transformation and transport part of communication.
Async services are usually designed for mediated communication (i.e. using middleware like PI).
Regards,
Gourav

Uanble to see all the contexts in jsp NetUI DataBinding

I am unable to see all the contexts in the JSP file.
I am doing the following
In the controller I have following methods
@jpf:forward name="success" path="myJSP.jsp"
action1()
//populate formBean
return new Forward("success", formBean);}
action2(FormBean bean)
In the JSP I have the following form
<netui:form action="action2">
In the JSP when I try to user NetUI DataBinding, I dont see actionForm or pageFlow context in the dropdowns to select from. I only see application, bundle, globalApp, request, session, pageContext and url scopes.
Is there something in controller that will remove the contexts??

Solved. It was a privlege problem about weblogic database. After I have deleted all the records on the p13n tables I could get the content.

EAM: Unable To See All Construction Estimate Lines.

I have a construction estimate that has almost 156,000 lines uploaded.
When I navigate to Maintenance Super User > Construction Units > Construction Estimate > Search for the Construction Estimate.
It only shows Maximum of 1005 records.
I queried the Construction Estimate through SQL to verify the number of lines it shows all 155,000 records,
But I am unable to see all the records from Self-Serivce page.
Any Solution?
Regards,
Essmaeel Ali.

Geraldine
Try rebuilding the database, see if it helps:
Hold down the apple and option keys and launch iPhoto. Use the resulting dialogue to rebuild.
Regards
TD
(Racine to Tralee - that's some commute... I hope you don't do it everyday.)

Unable to see All Photos when changing wallpaper in iOS 8

I am unable to see All Photos when I'm changing the wallpaper in iOS 8. I can only see my Albums that I've synced from my computer and Recently Added. Is this is a bug, moved the feature or just some odd thing going on with my phone?
Workaround: I can go to the actual photo in the Photos app, select it and send it to "Use as Wallpaper"
Device: iPhone 5S 32GB CDMA
iOS: 8

Geraldine
Try rebuilding the database, see if it helps:
Hold down the apple and option keys and launch iPhoto. Use the resulting dialogue to rebuild.
Regards
TD
(Racine to Tralee - that's some commute... I hope you don't do it everyday.)

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Sync with "new" computer
https://discussions.apple.com/docs/DOC-3141

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
David

Either of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

Can not see all the clips in large Icon view in my bin

I arranged my clips in a bin in large Icon view but i can not see all the clips in the bin while in that mode. I see the clips when in list mode or when i drag them out of the bin into the main bin. As soon I drag them back in large icon view bin they do not show up, when going back in list view they are there.
Any idea
Also my daughter accidently pulled the electrical plug, which turned my external hard drive off. So the media was off line. I hit reconnect the clip but the clip does not show as connected in the bin it keeps the Media offline icon but putting the clip in the viewer or time line it plays it. So the clip is reconnected
hope anybody can help with those two issues thanks

Nick
thanks for your message it helped to show the clips. Here how I solved it. I put the clips i could not see in large Icon view, to the Project folder. Even in the project folder I was only seeing the clips with Thumbnail in list view. When i hit large Icon view the clips disappeared, and they could not have been lower down as i only have about 5 folders in the project. I then clicked arrange the clip by name and they showed up again. Like that i dragged the clip back in to its bin and it showed up. The reason for going back and forth I arranged the clips manually in the bin before and when hitting arrange by name it spread them to far apart and put the clips not in a sequence I liked.
for the second part I followed Neil's suggestion it worked.

Can not see all the SQL server views

My SQL Server 2005 (SP2 STD) has about 1000 views. When I created a Crystal Report using Crystal Report 10, I can only see about 225 views are listed in Database Expert. Here is the procedure to reproduce the problem:
1. Create a new Crystal Report
2. Create a new connection using ODBC RDO
3. Drill into DSN Name->DB Name->dbo->Views. Only the first 200 or so views in alphabetical order are listed on Available Data Sources on the left pane.
I am using SQL authentication and sa account to connect to SQL. So security should not be the problem. I can also use Access 2003 linked table to see all the views in my SQL server.
Is there a restriction on how many views can be listed in Crystal Data Source? Is there another way to add data source to Report without using Database Expert?
Thanks in advance!

Youdao,
There is a default limit of 8000 objects that Crystal will see in the database.
I would suggest right clicking on your datasource and selecting Options. In the Data Explorer uncheck Tables and Stored Procedures leaving Views selected > press OK > then right click again and refresh.
If the limit was being reached then you should now see at least more Views if not all.
The default limit can be edited in the Registry (*Always recommended to back up the registry before editing).
The key is HKEY_CURRENT_USER > Software > Crystal Decisions or Business Objects > (version number) > Crystal Reports > Fetch options > NTablesMax

Apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

Report to see all the detail Journal Entries

Hi,
Currently reports in GL shows only the summary of transactions that has come from Subledger and also journals passed in GL but it does not show
1)party wise transactions
2)Details of invoices,payments,receipts with party wise.
This facility can be achieved only through drilldown feature but cannot see in any report.
Can any body suggest whether any such reports are available whether in GL or in subledger to see all the transactions that are posted to GL with party name?
Thanks
Jogendra

Hi Jogi
Try to get info from GL_IMPORT_REFERENCES table with GL_SL_LINK_ID 's.
Thanks
Santosh Kumar Pallerla

By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

rajlego,
in the Keyboard pane of System Preferences, select the Shortcuts tab, and then select Mission Control on the left-hand side. On the right-hand side, make sure that the Mission Control checkbox is checked, double-click on its current key combination (by default “^↑”) so that the key combination is highlighted, and then press the F3 button — that will set its shortcut to be F3. You can now press F3 to bring up Mission Control without needing to also press the Fn button.

I have and iPad and I have and iPhone 5 my husband has another one and I singed all of them with the same Apple ID and accound now my husband can see all the text I send and I get everything he gets how could I get his phone out of my accound

I have and iPad and I have and iPhone 5 my husband has another one and I singed all of them with the same Apple ID and accound now my husband can see all the text I send and I get everything he gets how could I get his phone out of my accound

Mishijos3 wrote:
I have and iPad and I have and iPhone 5 my husband has another one and I singed all of them with the same Apple ID ...
Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

Can't see all the drop down menu items in Thunderbird

I have a MAC OS10.8.5. and Tbird 36.1. I have been searchING for strategies to increase the font size on Tbird. I added the "theme font size and changer". THIS improved my situation a bit.
I upgraded my MAC from 10.6.8 to 10.8.5. A few weeks later I noticed that I can not see all the contents in the drop down windows.
I disabled the "theme font size and changer". I deleted the localstore.rdf. No results either time.
Attached is one of the windows. When I am typing in the "To" field, the auto-fill only lets me see barely 1 email. When I go into preferences on Tbird, the windows for preferences are cut off.
How can I restore the windows so I can see everything?

Please check your graphic driver is up to date.
If it still fails to work after updating drivers:
Then test in Thunderbird safe mode.
Help > Restart with addons disabled
If this fixes the issue then it is possible that one of your addon extensions is causing the problem. You would need to restart in Normal mode and then disable addon extensions until you locate the one causing an issue - maybe it needs updating.

Unable to see all the dimensions in EPM reporting

Similar Messages

Maybe you are looking for