Unable to set count for Select Query for BizTalk SQL receive port
Hi All,
Iam using BizTalk server 2009 classic SLQ adapter (using XML clause)for my integration to pull records from DB in to my application.
As per the DB values iam unable to set the record count as this started giving me error below (first it worked for 820 records with select Query.and then 400 and going down with respect to multiple runs).Kindly help .
Thanks in advance.
Hi Abhishek,
iam still getting the same error for 1000 records.
after turning off PreserveBOM aswell in send pipeline.
There was a failure executing the receive pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "Pipeline " Receive Port:
"SQLPort" URI: "SQL://XXXXX/OneC_DB/" Reason: An error occurred when parsing the incoming document: "'
', hexadecimal value 0x0B, is an invalid character. Line 188, position 3944.".
Similar Messages
-
Can any one send select query for this?
Hi,
can any one plese send select query for the following query.please send as early as possible.
Loop through the I_BSID internal table to fill records in I_OUTPUT.Combine data from I_BSID, I_KNKK, I_KNKK_KNKLI, I_KNA1 and I_KNVV into I_OUTPUT based on the linking conditions .Field Description Source are
I_OUTPUT-BUKRS Company code I_BSID-BUKRS
I_OUTPUT-KUNNR Customer number I_BSID-KUNNR
I_OUTPUT-NAME1 Customer Name I_KNA1-NAME1
I_OUTPUT-KNKLI Credit account I_KNKK-KNKLI
I_OUTPUT-KDGRP Customer Group I_KNKK-KDGRP
I_OUTPUT-KLIMK Credit Limit I_KNKK_KNKLI-KLIMK
I_OUTPUT-KVGR1 Business Unit I_KNVV-KVGR1
I_OUTPUT-REBZG Invoice Number I_BSID-REBZG
I_OUTPUT-BLDAT Invoice Date I_BSID-BLDAT
I_OUTPUT-WAERS Document Currency I_BSID-WAERS
I_OUTPUT-DUE_DATE Due Date Based on below
Calculation
Get the Payment terms days combining I_BSID and I_T052 based on the linking conditions mentioned above. Note : a) Baseline Date : If baseline date I_BSID-ZFBDT is blank , use the Document Date.b) Payment Term Days :If I_BSID-ZBD3T is not blank, take this as Payment Term Days for Due date calculation.
If I_BSID-ZBD3T is Blank, then get payment term days from I_T052 based on I_BSID-ZTERM. If there are more than one record in I_T052 for the given Payment term, get the day part from baseline date and select the first record where the day limit I_T052-ZTAGG is greater than the day part.If I_BSID-ZBD3T is blank and I_BSID-ZTERM is also blank, then take Y000 (Due Immediately) as Payment term and proceed with the above logic. Set the payment term field blank while printing.
Calculate Due date : For Debits, Determine Due Date = Baseline Date + Payment term Days(not discount days) For Credits Due date = Baseline date.Then, move the amount I_BSID-DMBTR to respective buckets (Not yet Due, Current Due, Past due 1-30, Past Due 31-60 etc.) Based on the due date.
Thanks&Regards,
praveen kumar.AHI,
To get Open Items you can use Function module:
data:i_items TYPE STANDARD TABLE OF rfpos.
CALL FUNCTION 'CUSTOMER_OPEN_ITEMS'
EXPORTING
bukrs = p_bukrs
kunnr = wa_customer-kunnr
TABLES
t_postab = i_items
EXCEPTIONS
no_open_items = 1
OTHERS = 2.
Table I_items will have all the open items for that Customer in the given company code.
Well for Clear Items: Try
GET_CLEARED_ITEMS or FMITPOFM_CLEARED_ITEMS_GET.
Hope it helps.
Manish -
Unable to set volume attribute "min-autosize" for volume
We have a TDP volume(destination), that is in snapmirrored state from 7Mode to cDOT.While trying to resize/increment the volume size by say 100g we get the following error. clusterName> volume size volumneName -vserver vserverName +100gWarning: Volume "vserver:volumeName" is a SnapMirror destination volume. The Filesystem Size for this volume is derived from its source and cannot be changed. The specified size will be used as the Volume Size.
Do you want to continue? {y|n}: y Error setting size of volume "vserver:volumeName". Unable to set volume attribute "min-autosize" for volume
"volumeName" on Vserver "vserverName". Reason: Volume 'volumenName' is a snapmirrored volume.
vol size: Flexible volume 'volumeName' size limit set to 8022664413184. Any idea ? Volumes autosize mode is false.Hi I am not trying to change any setting. I am trying to increase the size of the volume. I understand in case of a Snapmirrored volume the fs_fixed options is ON.But one can always increase the actual volume size using vol size command. Even if I increase the size on ONTAP on the file system side it will show as the size same as source. I understand that. So my question is why is it prevenitng me from increasing the size. RegardsAdai
-
Select Query for smart form-invoice
Hi Folks,
I have to fetch the following fields as per the requirement for desiging a invoice smartform.I had copied lb_bill_invoice smartform into z format.
Can anyone here please give me the select query for the same.
fields to fetched are as follows:-
1.vbrp-arktx,
2.vbrp-fkimg,
3.konv-kbetr with respect to vbrk-knumv
4.konv-kwert.
And also what all I have to give in format interface and global definitions of the smartform.
please help me in this regard.
Points will be given.
K.Kiran.Hi,
declare the variables V_arktx(40) and v_Qty like vbrp-fkimp and other varaibles for Kbetr, kwert, knumv on the global definitions.
select single arktx fkimg into (v_arktx, v_qty) from vbrp
where vbeln = LBBIL_IT_REFPURORD-BIL_NUMBER.
select single knumv into v_knumv from vbrk where where vbeln = LBBIL_IT_REFPURORD-BIL_NUMBER.
this select has to fire in the item level and in the loop.
so have to write in the correct place.
select kbetr kwert into (v_kbetr, v_kwert) from konv
where where knumv = v_knumv and kposn = LBBIL_IT_REFPURORD-ITM_NUMBER.
regards,
anji -
How to write selection Query for the following requirment.
Hi All,
I am new to ABAP, I need a help ,
I need to select all plants(WERKS) from MARC at Plant/Material level,
then I need to take all sales organozation(VKORG) from T001w,
then I need the company code(BUKRS) from TVKO based on VKORG,
then I need the currency key(WAERS) from T001 based on BUKRS,
Can any one help me in writing selection Query for the same?
Thanks All,
Debrup.Hi,
Its easy for you if you learn SELECT with JOIN to complete your task. So SEARCH the forum with SELECT statement and you will get a lot of examples using which you can write your own.
If you struck up anywhere revert back.
Regards
Karthik D -
Select query for fetching from 3 tables.
Can we have a single Select query for fetching same fields (kappl,kschl,vkorg,vtweg,spart,kunwe,datbi,knuma,datab,knumh)
from 3 tables >> KOTE707,KOTE708 and KOTE709 into an internal table for a particular KUNNR?
Regards,
Shashank.Hi,
If you have kunnr field in all the 3 tables then it is possible. use inner join as below
PARAMETERS: p_cityfr TYPE spfli-cityfrom,
p_cityto TYPE spfli-cityto.
DATA: BEGIN OF wa,
fldate TYPE sflight-fldate,
carrname TYPE scarr-carrname,
connid TYPE spfli-connid,
END OF wa.
DATA itab LIKE SORTED TABLE OF wa
WITH UNIQUE KEY fldate carrname connid.
SELECT c~carrname p~connid f~fldate
INTO CORRESPONDING FIELDS OF TABLE itab
FROM ( ( scarr AS c
INNER JOIN spfli AS p ON p~carrid = c~carrid
AND p~cityfrom = p_cityfr
AND p~cityto = p_cityto )
INNER JOIN sflight AS f ON f~carrid = p~carrid
AND f~connid = p~connid ).
LOOP AT itab INTO wa.
WRITE: / wa-fldate, wa-carrname, wa-connid.
ENDLOOP.
<b>Reward Points if this helps,</b>
Satish -
How to assign search help using ovs for select options for ALV in web dynpr
how to assign search help using ovs for select options for ALV in web dynpro
Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra -
Select query for rows where condition 1
Say I have a table, tb1, that has the following entries:
FName LName
Code
John Doe
xxx
Jane Doe
xxx
Steve Harper
x
Barrak Obama
x
George Bush
xxxx
Bill Clinton
xx
I'd like to write a select query that only lists the rows where the count for Code is > 1, i.e not display the last two rows from the above entry. How would I go about writing that select query.
Thanks.Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums.
>> Say I have a table, tb1, that has the following entries: <<
Are you this rude or really ignorant and too lazy to read the Netiquette at the start to this forum? Why do you think you do not need a key? No DDL? No constraints? And , why, why do you think that “tb1” is a precise, ISO-11179 conforming table name?
Let's make this a table of rude posters rated on a 4-star scale.
CREATE TABLE Rude_Posters
(first_name VARCHAR(15) NOT NULL,
last_name VARCHAR(15) NOT NULL,
PRIMARY KEY (first_name, last_name),
rudeness_code VARCHAR (4) NOT NULL
CHECK (rudeness_code IN ('x', 'xx', 'xxx', 'xxxx'));
INSERT INTO Rude_Posters
VALUES
('John', 'Doe', 'xxx'),
('Jane', 'Doe', 'xxx'),
('Steve', 'Harper', 'x'),
('Barrack', 'Obama', 'x'),
('George', 'Bush', 'xxxx'),
('Bill', 'Clinton', 'xx');
>> I'd like to write a SELECT query that only lists the rows where the count for rudeness_code is > 1, i.e not display the last two rows from the above entry. <<
The rudeness scale is based on stars, so to ask for an integer value is like saying “on a scale from 1 to 10, what is the color of your favorite letter of the alphabet?”
Next, the number of stars and your narrative do not match. Did you want to say WHERE rudeness_code IN ('xx' 'xxx', 'xxxx')?
Please stop programming SQL until you have gotten more education. At this point, you do not know enough to ask a question.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Getting deadlock detected while waiting for resource error for select Query.....
Hi all,
i am getting a below error whenever executing the below select query....
some times it will show dead lock detected while waiting for resource and terminated...
some times it executes and gives result..
but all the time it writes an alert to alert log
Plesae suggest how to resolve the issue..........
Thanks in advance
Env: Linux / Oracle 11.2.0.3.3
Error from alert log:
Errors in file /u01/oracle/oracle/diag/rdbms/bdrdb/bdrdb/trace/bdrdb_p017_6076.trc:
ORA-00060: deadlock detected while waiting for resource
ORA-10387: parallel query server interrupt (normal)
Trace file info... bdrdb_p017_6076.trc:
Trace file /u01/oracle/oracle/diag/rdbms/bdrdb/bdrdb/trace/bdrdb_p017_6076.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /u01/oracle/oracle/product/11.2.0/dbhome_1
System name: Linux
Node name: bdrdb.cteplindia.com
Release: 2.6.18-308.el5PAE
Version: #1 SMP Fri Jan 27 17:40:09 EST 2012
Machine: i686
Instance name: bdrdb
Redo thread mounted by this instance: 1
Oracle process number: 92
Unix process pid: 6076, image: [email protected] (P017)
*** 2013-11-04 23:18:57.915
*** SESSION ID:(423.59970) 2013-11-04 23:18:57.915
*** CLIENT ID:() 2013-11-04 23:18:57.915
*** SERVICE NAME:(bdrdb) 2013-11-04 23:18:57.915
*** MODULE NAME:() 2013-11-04 23:18:57.915
*** ACTION NAME:() 2013-11-04 23:18:57.915
*** 2013-11-04 23:18:57.915
DEADLOCK DETECTED ( ORA-00060 )
[Transaction Deadlock]
Deadlock graph:
---------Blocker(s)-------- ---------Waiter(s)---------
Resource Name process session holds waits process session holds waits
PS-00000001-00000011 92 423 S 33 128 S X
BF-2ed08c01-00000000 33 128 S 92 423 S X
session 423: DID 0001-005C-00081126 session 128: DID 0001-0021-00067D23
session 128: DID 0001-0021-00067D23 session 423: DID 0001-005C-00081126
DEADLOCK DETECTED ( ORA-00060 )
[Transaction Deadlock]
Deadlock graph:
---------Blocker(s)-------- ---------Waiter(s)---------
Resource Name process session holds waits process session holds waits
PS-00000001-00000011 92 423 S 33 128 S X
BF-2ed08c01-00000000 33 128 S 92 423 S X
session 423: DID 0001-005C-00081126 session 128: DID 0001-0021-00067D23
session 128: DID 0001-0021-00067D23 session 423: DID 0001-005C-00081126
Rows waited on:
Session 423: no row
Session 128: obj - rowid = 00021DC1 - AAAh3BAAVAAAQL/AAA
(dictionary objn - 138689, file - 21, block - 66303, slot - 0)
----- Information for the OTHER waiting sessions -----
Session 128:
sid: 128 ser: 46176 audsid: 1836857 user: 102/DBLOCAL
flags: (0x8000041) USR/- flags_idl: (0x1) BSY/-/-/-/-/-
flags2: (0x40009) -/-/INC
pid: 33 O/S info: user: oracle, term: UNKNOWN, ospid: 31611
image: [email protected]
client details:
O/S info: user: masked, term: masked, ospid: 5924:568
machine: masked program: Toad.exe
application name: TOAD background query session, hash value=526966934
current SQL:
application name: TOAD background query session, hash value=526966934
current SQL:
SELECT DISTINCT B_FP_TEST.TEST_ID
FROM B_FP_TEST,
B_USER_INFO,
J_FP_INVESTIGATOR,
L_TEST_STATUS,
L_ATMS_TEST_TYPE,
j_op_test_anml
WHERE B_FP_TEST.TEST_ID = J_FP_INVESTIGATOR.TEST_ID
AND B_FP_TEST.TEST_TYPE_ID = L_ATMS_TEST_TYPE.ATMS_TEST_TYPE_ID
AND B_USER_INFO.B_USER_INFO_ID = J_FP_INVESTIGATOR.INVESTIGATOR_ID
AND B_FP_TEST.STATUS_ID = L_TEST_STATUS.STATUS_ID
AND B_FP_TEST.IS_DELETED = :"SYS_B_00"
AND B_FP_TEST.TEST_NUM NOT IN (:"SYS_B_01", :"SYS_B_02", :"SYS_B_03")
AND L_ATMS_TEST_TYPE.IS_DELETED = :"SYS_B_04"
AND J_FP_INVESTIGATOR.is_pi = :"SYS_B_05"
AND L_TEST_STATUS.STATUS IN (:"SYS_B_06", :"SYS_B_07", :"SYS_B_08")
AND j_op_test_anml.test_id = B_FP_TEST.TEST_ID
----- End of information for the OTHER waiting sessions -----
*** 2013-11-04 23:18:57.916
dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=3, mask=0x0)
----- Error Stack Dump -----
ORA-00060: deadlock detected while waiting for resource
ORA-10387: parallel query server interrupt (normal)
----- SQL Statement (None) -----
Current SQL information unavailable - no cursor.
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
More......
Query:
SELECT DISTINCT B_FP_TEST.TEST_ID
FROM B_FP_TEST,
B_USER_INFO,
J_FP_INVESTIGATOR,
L_TEST_STATUS,
L_ATMS_TEST_TYPE,
j_op_test_anml
WHERE B_FP_TEST.TEST_ID = J_FP_INVESTIGATOR.TEST_ID
AND B_FP_TEST.TEST_TYPE_ID = L_ATMS_TEST_TYPE.ATMS_TEST_TYPE_ID
AND B_USER_INFO.B_USER_INFO_ID = J_FP_INVESTIGATOR.INVESTIGATOR_ID
AND B_FP_TEST.STATUS_ID = L_TEST_STATUS.STATUS_ID
AND B_FP_TEST.IS_DELETED = 0
AND B_FP_TEST.TEST_NUM NOT IN (1, 2, 99)
AND L_ATMS_TEST_TYPE.IS_DELETED = 0
AND J_FP_INVESTIGATOR.is_pi = 1
AND L_TEST_STATUS.STATUS IN ('Scheduled', 'In-Progress', 'Completed')
AND j_op_test_anml.test_id = B_FP_TEST.TEST_ID
AND ( (j_op_test_anml.end_date BETWEEN TO_DATE ('28-Oct-2013') - 1
AND TO_DATE ('04-Nov-2013') + 1)
OR (j_op_test_anml.start_date BETWEEN TO_DATE ('28-Oct-2013') - 1
AND TO_DATE ('04-Nov-2013') + 1)
OR (TO_DATE ('28-Oct-2013') BETWEEN j_op_test_anml.start_date
AND j_op_test_anml.end_date)
OR (TO_DATE ('04-Nov-2013') BETWEEN j_op_test_anml.start_date
AND j_op_test_anml.end_date))
AND L_ATMS_TEST_TYPE.IS_DELETED = 0
AND B_FP_TEST.DATASOURCE_ID = 9
Query Exp plan:
Plan hash value: 3398228788
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop | TQ |IN-OUT| PQ Distrib |
| 0 | SELECT STATEMENT | | 1501 | 102K| 1929 (1)| 00:00:24 | | | | | |
| 1 | HASH UNIQUE | | 1501 | 102K| 1929 (1)| 00:00:24 | | | | | |
| 2 | CONCATENATION | | | | | | | | | | |
| 3 | PX COORDINATOR | | | | | | | | | | |
| 4 | PX SEND QC (RANDOM) | :TQ30005 | 241 | 16870 | 800 (1)| 00:00:10 | | | Q3,05 | P->S | QC (RAND) |
|* 5 | HASH JOIN | | 241 | 16870 | 800 (1)| 00:00:10 | | | Q3,05 | PCWP | |
| 6 | PX RECEIVE | | 246 | 15990 | 797 (1)| 00:00:10 | | | Q3,05 | PCWP | |
| 7 | PX SEND HASH | :TQ30004 | 246 | 15990 | 797 (1)| 00:00:10 | | | Q3,04 | P->P | HASH |
|* 8 | HASH JOIN | | 246 | 15990 | 797 (1)| 00:00:10 | | | Q3,04 | PCWP | |
| 9 | PX RECEIVE | | 573 | 29223 | 793 (1)| 00:00:10 | | | Q3,04 | PCWP | |
| 10 | PX SEND HASH | :TQ30003 | 573 | 29223 | 793 (1)| 00:00:10 | | | Q3,03 | P->P | HASH |
|* 11 | HASH JOIN | | 573 | 29223 | 793 (1)| 00:00:10 | | | Q3,03 | PCWP | |
| 12 | BUFFER SORT | | | | | | | | Q3,03 | PCWC | |
| 13 | PX RECEIVE | | | | | | | | Q3,03 | PCWP | |
| 14 | PX SEND BROADCAST | :TQ30000 | | | | | | | | S->P | BROADCAST |
| 15 | NESTED LOOPS | | | | | | | | | | |
| 16 | NESTED LOOPS | | 485 | 20855 | 781 (0)| 00:00:10 | | | | | |
| 17 | TABLE ACCESS BY GLOBAL INDEX ROWID| J_OP_TEST_ANML | 485 | 10185 | 296 (0)| 00:00:04 | ROWID | ROWID | | | |
|* 18 | INDEX RANGE SCAN | IDX$$_2D190001 | 485 | | 4 (0)| 00:00:01 | | | | | |
|* 19 | INDEX UNIQUE SCAN | FT_TEST_ID_PK | 1 | | 0 (0)| 00:00:01 | | | | | |
|* 20 | TABLE ACCESS BY GLOBAL INDEX ROWID | B_FP_TEST | 1 | 22 | 1 (0)| 00:00:01 | ROWID | ROWID | | | |
| 21 | PX BLOCK ITERATOR | | 70382 | 549K| 11 (0)| 00:00:01 | | | Q3,03 | PCWC | |
|* 22 | TABLE ACCESS FULL | J_FP_INVESTIGATOR | 70382 | 549K| 11 (0)| 00:00:01 | | | Q3,03 | PCWP | |
| 23 | BUFFER SORT | | | | | | | | Q3,04 | PCWC | |
| 24 | PX RECEIVE | | 3 | 42 | 3 (0)| 00:00:01 | | | Q3,04 | PCWP | |
| 25 | PX SEND HASH | :TQ30001 | 3 | 42 | 3 (0)| 00:00:01 | | | | S->P | HASH |
|* 26 | TABLE ACCESS FULL | L_TEST_STATUS | 3 | 42 | 3 (0)| 00:00:01 | | | | | |
| 27 | BUFFER SORT | | | | | | | | Q3,05 | PCWC | |
| 28 | PX RECEIVE | | 30 | 150 | 3 (0)| 00:00:01 | | | Q3,05 | PCWP | |
| 29 | PX SEND HASH | :TQ30002 | 30 | 150 | 3 (0)| 00:00:01 | | | | S->P | HASH |
|* 30 | TABLE ACCESS FULL | L_ATMS_TEST_TYPE | 30 | 150 | 3 (0)| 00:00:01 | | | | | |
| 31 | NESTED LOOPS | | | | | | | | | | |
| 32 | NESTED LOOPS | | 3 | 210 | 329 (1)| 00:00:04 | | | | | |
| 33 | NESTED LOOPS | | 3 | 195 | 329 (1)| 00:00:04 | | | | | |
|* 34 | HASH JOIN | | 2 | 114 | 325 (1)| 00:00:04 | | | | | |
| 35 | NESTED LOOPS | | | | | | | | | | |
| 36 | NESTED LOOPS | | 6 | 258 | 322 (1)| 00:00:04 | | | | | |
| 37 | PARTITION RANGE SINGLE | | 6 | 126 | 316 (1)| 00:00:04 | 7 | 7 | | | |
|* 38 | TABLE ACCESS FULL | J_OP_TEST_ANML | 6 | 126 | 316 (1)| 00:00:04 | 7 | 7 | | | |
|* 39 | INDEX UNIQUE SCAN | FT_TEST_ID_PK | 1 | | 0 (0)| 00:00:01 | | | | | |
|* 40 | TABLE ACCESS BY GLOBAL INDEX ROWID | B_FP_TEST | 1 | 22 | 1 (0)| 00:00:01 | ROWID | ROWID | | | |
|* 41 | TABLE ACCESS FULL | L_TEST_STATUS | 3 | 42 | 3 (0)| 00:00:01 | | | | | |
|* 42 | TABLE ACCESS BY INDEX ROWID | J_FP_INVESTIGATOR | 1 | 8 | 2 (0)| 00:00:01 | | | | | |
|* 43 | INDEX RANGE SCAN | FI_TEST_ID_PK | 1 | | 1 (0)| 00:00:01 | | | | | |
|* 44 | INDEX UNIQUE SCAN | L_ATMS_TEST_TYPE_PK | 1 | | 0 (0)| 00:00:01 | | | | | |
|* 45 | TABLE ACCESS BY INDEX ROWID | L_ATMS_TEST_TYPE | 1 | 5 | 1 (0)| 00:00:01 | | | | | |
| 46 | PX COORDINATOR | | | | | | | | | | |
| 47 | PX SEND QC (RANDOM) | :TQ20003 | | | | | | | Q2,03 | P->S | QC (RAND) |
| 48 | NESTED LOOPS | | | | | | | | Q2,03 | PCWP | |
| 49 | NESTED LOOPS | | 33 | 2310 | 399 (2)| 00:00:05 | | | Q2,03 | PCWP | |
|* 50 | HASH JOIN | | 33 | 2145 | 397 (2)| 00:00:05 | | | Q2,03 | PCWP | |
| 51 | PX RECEIVE | | 78 | 3978 | 393 (1)| 00:00:05 | | | Q2,03 | PCWP | |
| 52 | PX SEND HASH | :TQ20002 | 78 | 3978 | 393 (1)| 00:00:05 | | | Q2,02 | P->P | HASH |
|* 53 | HASH JOIN | | 78 | 3978 | 393 (1)| 00:00:05 | | | Q2,02 | PCWP | |
| 54 | BUFFER SORT | | | | | | | | Q2,02 | PCWC | |
| 55 | PX RECEIVE | | | | | | | | Q2,02 | PCWP | |
| 56 | PX SEND BROADCAST | :TQ20000 | | | | | | | | S->P | BROADCAST |
| 57 | NESTED LOOPS | | | | | | | | | | |
| 58 | NESTED LOOPS | | 66 | 2838 | 382 (1)| 00:00:05 | | | | | |
| 59 | PARTITION RANGE SINGLE | | 66 | 1386 | 316 (1)| 00:00:04 | 7 | 7 | | | |
|* 60 | TABLE ACCESS FULL | J_OP_TEST_ANML | 66 | 1386 | 316 (1)| 00:00:04 | 7 | 7 | | | |
|* 61 | INDEX UNIQUE SCAN | FT_TEST_ID_PK | 1 | | 0 (0)| 00:00:01 | | | | | |
|* 62 | TABLE ACCESS BY GLOBAL INDEX ROWID | B_FP_TEST | 1 | 22 | 1 (0)| 00:00:01 | ROWID | ROWID | | | |
| 63 | PX BLOCK ITERATOR | | 70382 | 549K| 11 (0)| 00:00:01 | | | Q2,02 | PCWC | |
|* 64 | TABLE ACCESS FULL | J_FP_INVESTIGATOR | 70382 | 549K| 11 (0)| 00:00:01 | | | Q2,02 | PCWP | |
| 65 | BUFFER SORT | | | | | | | | Q2,03 | PCWC | |
| 66 | PX RECEIVE | | 3 | 42 | 3 (0)| 00:00:01 | | | Q2,03 | PCWP | |
| 67 | PX SEND HASH | :TQ20001 | 3 | 42 | 3 (0)| 00:00:01 | | | | S->P | HASH |
|* 68 | TABLE ACCESS FULL | L_TEST_STATUS | 3 | 42 | 3 (0)| 00:00:01 | | | | | |
|* 69 | INDEX UNIQUE SCAN | L_ATMS_TEST_TYPE_PK | 1 | | 0 (0)| 00:00:01 | | | Q2,03 | PCWP | |
|* 70 | TABLE ACCESS BY INDEX ROWID | L_ATMS_TEST_TYPE | 1 | 5 | 1 (0)| 00:00:01 | | | Q2,03 | PCWP | |
| 71 | PX COORDINATOR | | | | | | | | | | |
| 72 | PX SEND QC (RANDOM) | :TQ10003 | | | | | | | Q1,03 | P->S | QC (RAND) |
| 73 | NESTED LOOPS | | | | | | | | Q1,03 | PCWP | |
| 74 | NESTED LOOPS | | 33 | 2310 | 399 (2)| 00:00:05 | | | Q1,03 | PCWP | |
|* 75 | HASH JOIN | | 34 | 2210 | 397 (2)| 00:00:05 | | | Q1,03 | PCWP | |
| 76 | PX RECEIVE | | 78 | 3978 | 393 (1)| 00:00:05 | | | Q1,03 | PCWP | |
| 77 | PX SEND HASH | :TQ10002 | 78 | 3978 | 393 (1)| 00:00:05 | | | Q1,02 | P->P | HASH |
|* 78 | HASH JOIN | | 78 | 3978 | 393 (1)| 00:00:05 | | | Q1,02 | PCWP | |
| 79 | BUFFER SORT | | | | | | | | Q1,02 | PCWC | |
| 80 | PX RECEIVE | | | | | | | | Q1,02 | PCWP | |
| 81 | PX SEND BROADCAST | :TQ10000 | | | | | | | | S->P | BROADCAST |
| 82 | NESTED LOOPS | | | | | | | | | | |
| 83 | NESTED LOOPS | | 66 | 2838 | 382 (1)| 00:00:05 | | | | | |
| 84 | PARTITION RANGE SINGLE | | 66 | 1386 | 316 (1)| 00:00:04 | 7 | 7 | | | |
|* 85 | TABLE ACCESS FULL | J_OP_TEST_ANML | 66 | 1386 | 316 (1)| 00:00:04 | 7 | 7 | | | |
|* 86 | INDEX UNIQUE SCAN | FT_TEST_ID_PK | 1 | | 0 (0)| 00:00:01 | | | | | |
|* 87 | TABLE ACCESS BY GLOBAL INDEX ROWID | B_FP_TEST | 1 | 22 | 1 (0)| 00:00:01 | ROWID | ROWID | | | |
| 88 | PX BLOCK ITERATOR | | 70382 | 549K| 11 (0)| 00:00:01 | | | Q1,02 | PCWC | |
|* 89 | TABLE ACCESS FULL | J_FP_INVESTIGATOR | 70382 | 549K| 11 (0)| 00:00:01 | | | Q1,02 | PCWP | |
| 90 | BUFFER SORT | | | | | | | | Q1,03 | PCWC | |
| 91 | PX RECEIVE | | 3 | 42 | 3 (0)| 00:00:01 | | | Q1,03 | PCWP | |
| 92 | PX SEND HASH | :TQ10001 | 3 | 42 | 3 (0)| 00:00:01 | | | | S->P | HASH |
|* 93 | TABLE ACCESS FULL | L_TEST_STATUS | 3 | 42 | 3 (0)| 00:00:01 | | | | | |
|* 94 | INDEX UNIQUE SCAN | L_ATMS_TEST_TYPE_PK | 1 | | 0 (0)| 00:00:01 | | | Q1,03 | PCWP | |
|* 95 | TABLE ACCESS BY INDEX ROWID | L_ATMS_TEST_TYPE | 1 | 5 | 1 (0)| 00:00:01 | | | Q1,03 | PCWP | |
Predicate Information (identified by operation id):
5 - access("B_FP_TEST"."TEST_TYPE_ID"="L_ATMS_TEST_TYPE"."ATMS_TEST_TYPE_ID")
8 - access("B_FP_TEST"."STATUS_ID"="L_TEST_STATUS"."STATUS_ID")
11 - access("B_FP_TEST"."TEST_ID"="J_FP_INVESTIGATOR"."TEST_ID")
18 - access("J_OP_TEST_ANML"."START_DATE">=TO_DATE(' 2013-10-27 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND "J_OP_TEST_ANML"."START_DATE"<=TO_DATE(' 2013-11-05
00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
19 - access("J_OP_TEST_ANML"."TEST_ID"="B_FP_TEST"."TEST_ID")
20 - filter("B_FP_TEST"."DATASOURCE_ID"=9 AND "B_FP_TEST"."IS_DELETED"=0 AND "B_FP_TEST"."TEST_NUM"<>1 AND "B_FP_TEST"."TEST_NUM"<>2 AND
"B_FP_TEST"."TEST_NUM"<>99)
22 - filter("J_FP_INVESTIGATOR"."IS_PI"=1)
26 - filter("L_TEST_STATUS"."STATUS"='Completed' OR "L_TEST_STATUS"."STATUS"='In-Progress' OR "L_TEST_STATUS"."STATUS"='Scheduled')
30 - filter("L_ATMS_TEST_TYPE"."IS_DELETED"=0)
34 - access("B_FP_TEST"."STATUS_ID"="L_TEST_STATUS"."STATUS_ID")
38 - filter("J_OP_TEST_ANML"."END_DATE">=TO_DATE(' 2013-10-27 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND "J_OP_TEST_ANML"."END_DATE"<=TO_DATE(' 2013-11-05
00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND (LNNVL("J_OP_TEST_ANML"."START_DATE">=TO_DATE(' 2013-10-27 00:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR
LNNVL("J_OP_TEST_ANML"."START_DATE"<=TO_DATE(' 2013-11-05 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))))
39 - access("J_OP_TEST_ANML"."TEST_ID"="B_FP_TEST"."TEST_ID")
40 - filter("B_FP_TEST"."DATASOURCE_ID"=9 AND "B_FP_TEST"."IS_DELETED"=0 AND "B_FP_TEST"."TEST_NUM"<>1 AND "B_FP_TEST"."TEST_NUM"<>2 AND
"B_FP_TEST"."TEST_NUM"<>99)
41 - filter("L_TEST_STATUS"."STATUS"='Completed' OR "L_TEST_STATUS"."STATUS"='In-Progress' OR "L_TEST_STATUS"."STATUS"='Scheduled')
42 - filter("J_FP_INVESTIGATOR"."IS_PI"=1)
43 - access("B_FP_TEST"."TEST_ID"="J_FP_INVESTIGATOR"."TEST_ID")
44 - access("B_FP_TEST"."TEST_TYPE_ID"="L_ATMS_TEST_TYPE"."ATMS_TEST_TYPE_ID")
45 - filter("L_ATMS_TEST_TYPE"."IS_DELETED"=0)
50 - access("B_FP_TEST"."STATUS_ID"="L_TEST_STATUS"."STATUS_ID")
53 - access("B_FP_TEST"."TEST_ID"="J_FP_INVESTIGATOR"."TEST_ID")
60 - filter("J_OP_TEST_ANML"."END_DATE">=TO_DATE(' 2013-11-04 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND "J_OP_TEST_ANML"."START_DATE"<=TO_DATE(' 2013-11-04
00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND (LNNVL("J_OP_TEST_ANML"."END_DATE">=TO_DATE(' 2013-10-27 00:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR
LNNVL("J_OP_TEST_ANML"."END_DATE"<=TO_DATE(' 2013-11-05 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))) AND (LNNVL("J_OP_TEST_ANML"."START_DATE">=TO_DATE(' 2013-10-27
00:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR LNNVL("J_OP_TEST_ANML"."START_DATE"<=TO_DATE(' 2013-11-05 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))))
61 - access("J_OP_TEST_ANML"."TEST_ID"="B_FP_TEST"."TEST_ID")
62 - filter("B_FP_TEST"."DATASOURCE_ID"=9 AND "B_FP_TEST"."IS_DELETED"=0 AND "B_FP_TEST"."TEST_NUM"<>1 AND "B_FP_TEST"."TEST_NUM"<>2 AND
"B_FP_TEST"."TEST_NUM"<>99)
64 - filter("J_FP_INVESTIGATOR"."IS_PI"=1)
68 - filter("L_TEST_STATUS"."STATUS"='Completed' OR "L_TEST_STATUS"."STATUS"='In-Progress' OR "L_TEST_STATUS"."STATUS"='Scheduled')
69 - access("B_FP_TEST"."TEST_TYPE_ID"="L_ATMS_TEST_TYPE"."ATMS_TEST_TYPE_ID")
70 - filter("L_ATMS_TEST_TYPE"."IS_DELETED"=0)
75 - access("B_FP_TEST"."STATUS_ID"="L_TEST_STATUS"."STATUS_ID")
78 - access("B_FP_TEST"."TEST_ID"="J_FP_INVESTIGATOR"."TEST_ID")
85 - filter("J_OP_TEST_ANML"."END_DATE">=TO_DATE(' 2013-10-28 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND "J_OP_TEST_ANML"."START_DATE"<=TO_DATE(' 2013-10-28
00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND (LNNVL("J_OP_TEST_ANML"."END_DATE">=TO_DATE(' 2013-11-04 00:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR
LNNVL("J_OP_TEST_ANML"."START_DATE"<=TO_DATE(' 2013-11-04 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))) AND (LNNVL("J_OP_TEST_ANML"."END_DATE">=TO_DATE(' 2013-10-27
00:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR LNNVL("J_OP_TEST_ANML"."END_DATE"<=TO_DATE(' 2013-11-05 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))) AND
(LNNVL("J_OP_TEST_ANML"."START_DATE">=TO_DATE(' 2013-10-27 00:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR LNNVL("J_OP_TEST_ANML"."START_DATE"<=TO_DATE(' 2013-11-05
00:00:00', 'syyyy-mm-dd hh24:mi:ss'))))
86 - access("J_OP_TEST_ANML"."TEST_ID"="B_FP_TEST"."TEST_ID")
87 - filter("B_FP_TEST"."DATASOURCE_ID"=9 AND "B_FP_TEST"."IS_DELETED"=0 AND "B_FP_TEST"."TEST_NUM"<>1 AND "B_FP_TEST"."TEST_NUM"<>2 AND
"B_FP_TEST"."TEST_NUM"<>99)
89 - filter("J_FP_INVESTIGATOR"."IS_PI"=1)
93 - filter("L_TEST_STATUS"."STATUS"='Completed' OR "L_TEST_STATUS"."STATUS"='In-Progress' OR "L_TEST_STATUS"."STATUS"='Scheduled')
94 - access("B_FP_TEST"."TEST_TYPE_ID"="L_ATMS_TEST_TYPE"."ATMS_TEST_TYPE_ID")
95 - filter("L_ATMS_TEST_TYPE"."IS_DELETED"=0)Excellent piece of follow-up on my first suggestion.
I nearly made a comment about how the plan doesn't show Bloom filter pruning either - and then I realised why not. The plan you've shown us comes from Explain Plan with literal values present; the trace file shows bind variables with names that are generated when cursor_sharing is set to force or similar - so the run-time plan and the plan from explain plan are almost guaranteed to be different.
Oracle support will need you to supply the plan you get from trying to run the query and then making a call to dbms_xplan.display_cursor() - dbms_xplan in 10g | Oracle Scratchpad If you do this I think you'll find that the pstart/pstop columns contain entries like :BF0000, and you may even find operations link PX JOIN FILTER CREATE / PX JOIN FILTER USE
A couple of generic notes:
if a query does sufficient work to merit parallel execution, then it's usually better to supply the best possible information to the optimizer, which means using literals rather than bind variables - you could try executing the query with the hint /*+ cursor_sharing_exact */ to stop Oracle from turning your literals into binds; it might be the presence of bind variables that's making the optimizer choose a path that has to include bloom filter pruning in your case.
Where you have the to_date() call you've used a four-digit year - which is a very good thing and helps the optimizer - but it's also a good idea to include an explicit format string as well: with a four-digit year this probably won't make any difference, but it avoids any risk of ambiguity for the optimizer.
I made a comment about the P->S stage and bottlenecks - I spent a couple more minutes looking at the plan, and I see the optimizer has used concatentation: in effect it has run three query blocks one after the other and fed the results to the query co-ordinator - in this case the P->S would make no difference to the end-user response time there's always a final P->S to the coordinator, you just happen to have three of them.
Regards
Jonathan Lewis -
Issue with select query for secondary index
Hi all,
I have created a secondary index A on mara table with fields Mandt and Packaging Material Type VHART.
Now i am trying to write a report
Tables : mara.
data : begin of itab occurs 0.
include structure mara.
data : end of itab.
*select * from mara into table itab*
CLIENT SPECIFIED where
MANDT = SY-MANDT and
VHART = 'WER'.
I'm getting an error
Unable to interpret "CLIENT". Possible causes of error: Incorrect spelling or comma error.
if i change to my select query to
*select * from mara into table itab*
where
MANDT = SY-MANDT and
VHART = 'WER'.
I'm getting an error
Without the addition "CLIENT SPECIFIED", you cannot specify the client field "MANDT" in the WHERE condition.
Let me know if iam wrong and we are at 4.6c
ThanksLike I already said, even if you have added the mandt field in the secondary index, there is no need the use it in the select statement.
Let me elaborate on my reply before. If you have created a UNIQUE index, which I don't think you have, then you should include CLIENT in the index. A unique index for a client-dependent table must contain the client field.
Additional info:
The accessing speed does not depend on whether or not an index is defined as a unique index. A unique index is simply a means of defining that certain field combinations of data records in a table are unique.
Even if you have defined a secondary index, this does not automatically mean, that this index is used. This also depends on the database optimizer. The optimizer will determine which index is best and use it. So before transporting this index, you should make sure that the index is used. How to check this, have a look at the link:
[check if index is used|http://help.sap.com/saphelp_nw70/helpdata/EN/cf/21eb3a446011d189700000e8322d00/content.htm]
Edited by: Micky Oestreich on May 13, 2008 10:09 PM -
How to write select query for all the user tables in database
Can any one tell me how to select the columns from all the user tables in a database
Here I had 3columns as input...
1.phone no
2.memberid
3.sub no.
I have to select call time,record,agn from all the tables in a database...all database tables have the same column names but some may have additional columns..
Eg: select call time, record,agn from ah_t_table where phone no= 6186759765,memberid=j34563298
Query has to execute not only for this table but for all user tables in the database..all tables will start with ah_t
I am trying for this query since 30days...
Help me please....any kind of help is appreciated.....Hi,
user13113704 wrote:
... i need to include the symbol (') for the numbers(values) to get selected..
eg: phone no= '6284056879'To include a single-quote in a string literal, use 2 or them in a row, as shown below.
Starting in Oracle 10, you can also use Q-notation:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements003.htm#i42617
...and also can you tell me how to execute the output of this script. What front end are you using? If it's SQL*Plus, then you can SPOOL the query to a file, and then execute that file, like this:
-- Suppress SQL*Plus features that interfere with raw output
SET FEEDBACK OFF
SET PAGESIZE 0
-- Run preliminary query to generate main query
SPOOL c:\my_sql_dir\all_ah_t.sql
SELECT 'select call time, record, agn from '
|| owner
|| '.'
|| table_name
|| ' where phone_no = ''6186759765'' and memberid = j34563298'
|| CASE
WHEN ROW_NUMBER () OVER ( ORDER BY owner DESC
, table_name DESC
) = 1
THEN ';'
ELSE ' UNION ALL'
END AS txt
FROM all_tables
WHERE SUBSTR (table_name, 1, 4) = 'AH_T'
ORDER BY owner
, table_name
SPOOL OFF
-- Restore SQL*Plus features that interfere with raw output (if desired)
SET FEEDBACK ON
SET PAGESIZE 50
-- Run main query:
@c:\my_sql_dir\all_ah_t.sql
so that i form a temporary view for this script as a table(or store the result in a temp table) and my problem will be solved..Sorry, I don't understand. What is a "temporary view"? -
How to do outer join select query for an APEX report
Hello everyone,
I am Ann.
I have one select statement that calculate the statistics for one month(October 2012 in this example)
select ph.phase_number
, sum ( (case
WHEN ph.date_finished IS NULL OR ph.date_finished > last_day(TO_DATE('Oct 2012','MON YYYY'))
THEN last_day(TO_DATE('Oct 2012','MON YYYY'))
ELSE ph.date_finished
END )
- ph.date_started + 1) / count(def.def_id) as avg_days
from phase_membership ph
inner join court_engagement ce on ph.mpm_eng_id = ce.engagement_id
inner join defendant def on ce.defendant_id = def.def_id
where def.active = 1
and ph.date_started <= last_day(TO_DATE('Oct 2012','MON YYYY'))
and ph.active = 1
and UPPER(ce.court_name) LIKE '%'
group by rollup(phase_number)
Result is as below
Phase_Number AVG_DAYS
Phase One 8.6666666666666667
Phase Two 14.6
Phase Three 12
11.4615365
I have other select list mainly list the months between two date value.
select to_char(which_month, 'MON YYYY') as display_month
from (
select add_months(to_date('Aug 2012','MON YYYY'), rownum-1) which_month
from all_objects
where
rownum <= months_between(to_date('Oct 2012','MON YYYY'), add_months(to_date('Aug 2012','MON YYYY'), -1))
order by which_month )
Query result is as below
DISPLAY_MONTH
AUG 2012
SEP 2012
OCT 2012
Is there any way that I can join these two select statement above to generate a result like:
Month Phase Number Avg days
Aug 2012 Phase One 8.666
Sep 2012 Phase One 7.66
Oct 2012 Phase One 5.66
Aug 2012 Phase Two 8.666
Sep 2012 Phase Two 7.66
Oct 2012 Phase Two 5.66
Aug 2012 Phase Three 8.666
Sep 2012 Phase Three 7.66
Oct 2012 Phase Three 5.66
Or
Month Phase Number Avg days
Aug 2012 Phase One 8.666
Aug 2012 Phase Two 7.66
Aug 2012 Phase Three 5.66
Sep 2012 Phase One 8.666
Sep 2012 Phase Two 7.66
Sep 2012 Phase Three 5.66
Oct 2012 Phase One 8.666
Oct 2012 Phase Two 7.66
Oct 2012 Phase Three 5.66
And it can be order by either Phase Number or Month.
My other colleague suggest I should use an left outer join but after trying so many ways, I am still stuck.
One of the select I tried is
select a.display_month,b.* from (
select to_char(which_month, 'MON YYYY') as display_month
from (
select add_months(to_date('Aug 2012','MON YYYY'), rownum-1) which_month
from all_objects
where
rownum <= months_between(to_date('Oct 2012','MON YYYY'), add_months(to_date('Aug 2012','MON YYYY'), -1))
order by which_month )) a left outer join
( select to_char(ph.date_finished,'MON YYYY') as join_month, ph.phase_number
, sum ( (case
WHEN ph.date_finished IS NULL OR ph.date_finished > last_day(TO_DATE(a.display_month,'MON YYYY'))
THEN last_day(TO_DATE(a.display_month,'MON YYYY'))
ELSE ph.date_finished
END )
- ph.date_started + 1) / count(def.def_id) as avg_days
from phase_membership ph
inner join court_engagement ce on ph.mpm_eng_id = ce.engagement_id
inner join defendant def on ce.defendant_id = def.def_id
where def.active = 1
and ph.date_started <= last_day(TO_DATE(a.display_month,'MON YYYY'))
and ph.active = 1
and UPPER(ce.court_name) LIKE '%'
group by to_char(ph.date_finished,'MON YYYY') , rollup(phase_number)) b
on a.display_month = b.join_month
but then I get an error
SQL Error: ORA-00904: "A"."DISPLAY_MONTH": invalid identifier
I need to display a report on APEX with option for people to download at least CSV format.
I already have 1 inteactive report in the page, so don’t think can add another interactive report without using the iframe trick.
If any of you have any ideas, please help.
Thanks a lot.
AnnFirst of all, a huge thanks for following this Frank.
I have just started working here, I think the Oracle version is 11g, but not sure.
To run Oracle APEX version 4, I think they must have at least 10g R2.
This report is a bit challenging for me.I has never worked with PARTITION before.
About the select query you suggested, I run , and it seems working fine, but if I try this,
it return error ORA-01843: not a valid month
DEFINE startmonth = "Aug 2012";
DEFINE endmonth = "Oct 2012";
WITH all_months AS
select add_months(to_date('&startmonth','MON YYYY'), rownum-1) AS which_month
, add_months(to_date('&startmonth','MON YYYY'), rownum ) AS next_month
from all_objects
where
rownum <= months_between(to_date('&endmonth','MON YYYY'), add_months(to_date('&startmonth','MON YYYY'), -1))
select TO_CHAR (am.which_month, 'Mon YYYY') AS month
, ph.phase_number
, sum ( (case
WHEN ph.date_finished IS NULL OR ph.date_finished > last_day(TO_DATE(am.which_month,'MON YYYY'))
THEN last_day(TO_DATE(am.which_month,'MON YYYY'))
ELSE ph.date_finished
END )
- ph.date_started + 1) / count(def.def_id) as avg_days
FROM all_months am
LEFT OUTER JOIN phase_membership ph PARTITION BY (ph.phase_number)
ON am.which_month <= ph.date_started
AND am.next_month > ph.date_started
AND ph.date_started <= last_day(TO_DATE(am.which_month,'MON YYYY')) -- May not be needed
AND ph.active = 1
LEFT OUTER join court_engagement ce on ph.mpm_eng_id = ce.engagement_id
and ce.court_name IS NOT NULL -- or something involving LIKE
LEFT OUTER join defendant def on ce.defendant_id = def.def_id
AND def.active = 1
group by rollup(phase_number, am.which_month)
ORDER BY am.which_month
, ph.phase_number
;Here is the shorted versions of the three tables:
A_DEFENDANT, A_ENGAGEMENT, A_PHASE_MEMBERSHIP
CREATE TABLE "A_DEFENDANT"
"DEF_ID" NUMBER NOT NULL ENABLE,
"FIRST_NAME" VARCHAR2(50 BYTE),
"SURNAME" VARCHAR2(20 BYTE) NOT NULL ENABLE,
"DOB" DATE NOT NULL ENABLE,
"ACTIVE" NUMBER(2,0) DEFAULT 1 NOT NULL ENABLE,
CONSTRAINT "A_DEFENDANT_PK" PRIMARY KEY ("DEF_ID"))
Sample Data
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (101,'Joe','Bloggs',to_date('12/12/99','DD/MM/RR'),1);
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (102,'John','Smith',to_date('20/05/00','DD/MM/RR'),1);
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (103,'Jane','Black',to_date('15/02/98','DD/MM/RR'),1);
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (104,'Minnie','Mouse',to_date('13/12/88','DD/MM/RR'),0);
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (105,'Daisy','Duck',to_date('05/08/00','DD/MM/RR'),1);
CREATE TABLE "A_ENGAGEMENT"
"ENGAGEMENT_ID" NUMBER NOT NULL ENABLE,
"COURT_NAME" VARCHAR2(50 BYTE) NOT NULL ENABLE,
"DATE_REFERRED" DATE,
"DETERMINATION_HEARING_DATE" DATE,
"DATE_JOINED_COURT" DATE,
"DATE_TREATMENT_STARTED" DATE,
"DATE_TERMINATED" DATE,
"TERMINATION_TYPE" VARCHAR2(50 BYTE),
"ACTIVE" NUMBER(2,0) DEFAULT 1 NOT NULL ENABLE,
"DEFENDANT_ID" NUMBER,
CONSTRAINT "A_ENGAGEMENT_PK" PRIMARY KEY ("ENGAGEMENT_ID"))
Insert into A_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TREATMENT_STARTED,DATE_TERMINATED,TERMINATION_TYPE,ACTIVE,DEFENDANT_ID) values (1,'AA',to_date('12/08/12','DD/MM/RR'),null,to_date('12/08/12','DD/MM/RR'),null,null,null,1,101);
Insert into A_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TREATMENT_STARTED,DATE_TERMINATED,TERMINATION_TYPE,ACTIVE,DEFENDANT_ID) values (2,'BB',to_date('01/09/12','DD/MM/RR'),null,to_date('02/09/12','DD/MM/RR'),null,null,null,1,102);
Insert into A_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TREATMENT_STARTED,DATE_TERMINATED,TERMINATION_TYPE,ACTIVE,DEFENDANT_ID) values (3,'AA',to_date('02/09/12','DD/MM/RR'),null,to_date('15/09/12','DD/MM/RR'),null,null,null,1,103);
Insert into A_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TREATMENT_STARTED,DATE_TERMINATED,TERMINATION_TYPE,ACTIVE,DEFENDANT_ID) values (4,'BB',to_date('01/10/12','DD/MM/RR'),null,to_date('02/10/12','DD/MM/RR'),null,null,null,1,105);
CREATE TABLE "A_PHASE_MEMBERSHIP"
"MPM_ID" NUMBER NOT NULL ENABLE,
"MPM_ENG_ID" NUMBER NOT NULL ENABLE,
"PHASE_NUMBER" VARCHAR2(50 BYTE),
"DATE_STARTED" DATE NOT NULL ENABLE,
"DATE_FINISHED" DATE,
"NOTES" VARCHAR2(2000 BYTE),
"ACTIVE" NUMBER(2,0) DEFAULT 1 NOT NULL ENABLE,
CONSTRAINT "A_PHASE_MEMBERSHIP_PK" PRIMARY KEY ("MPM_ID"))
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (1,1,'PHASE ONE',to_date('15/09/12','DD/MM/RR'),to_date('20/09/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (2,1,'PHASE TWO',to_date('21/09/12','DD/MM/RR'),to_date('29/09/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (3,2,'PHASE ONE',to_date('12/09/12','DD/MM/RR'),null,null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (4,3,'PHASE ONE',to_date('20/09/12','DD/MM/RR'),to_date('01/10/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (5,3,'PHASE TWO',to_date('02/10/12','DD/MM/RR'),to_date('15/10/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (6,4,'PHASE ONE',to_date('03/10/12','DD/MM/RR'),to_date('10/10/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (7,3,'PHASE THREE',to_date('17/10/12','DD/MM/RR'),null,null,0);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (8,1,'PHASE THREE',to_date('30/09/12','DD/MM/RR'),to_date('16/10/12','DD/MM/RR'),null,1);
The requirements are:
The user must be able to request the extract for one or more calendar months, e.g.
May 2013
May 2013 – Sep 2013.
The file must contain a separate row for each calendar month in the requested range. Each row must contain the statistics computed for that calendar month.
The file must also include a row of totals.
The user must be able to request the extract for either Waitakere or Auckland or Consolidated (both courts’ statistics accumulated).
Then the part that I am stuck is
For each monitoring phase:
Phase name (e.g. “Phase One”)
Avg_time_in_phase_all_particip
for each phase name,
Add up days in each “phase name” Monitoring Phase, calculated as:
If Monitoring Phase.Date Finished is NULL or > month end date,
+(*Month end date* Minus Monitoring Phase.Date Started Plus 1)+
Otherwise (phase is complete)
+(Monitoring Phase.Date Finished Minus Monitoring Phase.Date Started Plus 1.)+
Divide by the numbers of all participants who have engaged in “phase name”.
This is the words of the Business Analyst,
I try to do as required but still struggle to identify end_month for the above formula to display for the range of months.
Of course, I can write two nested cursor. The first one run the list of month, then for each month, run the parameterised report.
But I prefer if possible just use SQL statements, or at least a PL/SQL but return a query.
With this way, I can create an APEX report, and use their CSV Extract function.
Yes, you are right, court_name is one of the selection parameters.
And the statistics is not exactly for one month. It is kind of trying to identify all phases that are running through the specified month (even phase.date_started is before the month start).
This is the reason why I put the condition AND ph.date_started <= last_day(TO_DATE('Oct 2012','MON YYYY')) (otherwise I get negative avg_days)
User can choose either one court "AA" or "BB" or combined which is all figures.
Sorry for bombarding you a lot of information.
Thanks a lot, again.
Edited by: Ann586341 on Oct 29, 2012 9:57 PM
Edited by: Ann586341 on Oct 29, 2012 9:59 PM -
Need to use Hint for Select Query 11g
Hi,
I have a select query which is fetching data from multiple table.
I just need 10 or less rows, already I m using rownum <=10
Could you tell which is the better choice for using HINT.
/*+ FIRST_ROWS(10) */ (or) /*+ all_rows */
Thanks.On Oracle 11.2.0.3 and 11.1.0.7 on my test table with an ORDER BY in the query, I found FIRST_ROWS using the index to get sorted rows and ALL_ROWS retrieving 10 rows from a full scan and then sorting them.
On Oracle I didn't find any difference in plan on a different, physically smaller, table.
For the ALL_ROWS version the optimiser already knows that there will only be 10 rows returned.
The performance difference: As usual, only use FIRST_ROWS if you actually intend to fetch less than the full data set. If you intend to fetch all 10 rows, use ALL_ROWS, which should be the default (taken from the optimizer_mode system parameter). -
How to set the parameter selection *optional* for each subreport?
Hi,
I am using Crystal Reprots 11.
I create 10 subreports, and each subreport contains a Parameters Field.
The 10 subreports are put in 10 footer sections in increasing order, i.e. subreport1, subreport2, subreport3, ..., subreport10.
When I use "Print Preview" to take a look at the whole report, CR prompts a "Edit Values" window for selecting parameter values for all 10 subreports.
For example, if I only select parameter values for subreport1 and click "OK", 9 error messages on the "Edit Values" window come out above the selection list box of every other subreports (i.e. subreport2 ~ subreport10) showing that: 'The value is not valid'.
Sometimes, I just want to review some specific subreports but not all.
How should I do to set the parameter selection optional (not mandatory) for each subreport?
Thank you in adavance.
Edited by: Holdup on Feb 17, 2012 3:44 PMHi,
Here's how you can make the prompts optional (Assuming you're using CR 2008 or higher):
1) Go into each subreport
2) You should see the parameter in the Field Explorer. Right-click the name and select Edit > Look for an option called 'Optional Prompt'. Set it to true
3) If you have a record selection in the subreport, then you need to modify the selection formula to something like this:
if not(hasvalue({?Parameter_Name})) then True else = {?Parameter_Name}
Hope this helps!
-Abhilash -
Select query for fields in selection screen
SELECT * FROM hrus_d2
INTO TABLE ta_list
WHERE us_name IN subs_obj
and begdat in date_ran.
and enddat in date_ran
How can I rewrite the above query for high and low ranges of date_ran field in condition? It doesn't allow in operator with date_ran-low.Can u please help me outHi
rahul
SELECT *
FROM hrus_d2
INTO TABLE ta_list
WHERE us_name IN subs_obj
and begdat = date_ran-low
and enddat = date_ran -high.
u can write like this or i amnot getting why u r expliciting this date u can give directly as
SELECT *
FROM hrus_d2
INTO TABLE ta_list
WHERE us_name IN subs_obj
date in date_ran.
plzz reward if i am usefull to u in any way.. plzz dont forget to reward
Maybe you are looking for
-
ISE 1.2 - Can SelfService GuestUsers get emailed their credentails ?
Hi ISE'erz Please leverage with me here ... How do you understand this wording in the SP2 release note; http://www.cisco.com/en/US/docs/security/ise/1.2/release_notes/ise12_rn.html#wp413828 Support for Guest Self-Registration Based on Email Domain Wh
-
What is the easier way to edit a captured slide?
I have created a demonstration animation and there are several slides that need a little graphics editing. So far, I have not found a way to automate the process of editing slides. The only method I can determine is by selecting "Copy Background", th
-
Hi. Can I display the following .HTM from a button on my form? /usr/IBM/WebSphere/AppServerCommunityEdition/repository/default/TTMSWeb/1222365662123/TTMSWeb-1222365662123.war/adds_reporters.htm Is there a built-in for this?
-
Hi Experts, 1) Do we have busines content (WEBi Reports) in BOBJ for HCM that interfaces with the BW content Standard Queries ? 2) Is it possible to use the Business Content in BOBJ to build reports directly on the ERP system ? Thanks, Santosh
-
I have found a lost ipad wifi only, locked with passcode ... what now ?
i have found an ipad and i would like to help find the owner but the ipad is locked with a passcode so i cannot connect it to the internet so that owner can find it on find my ipad i have uploaded a pic of the back of the device with the serial numbe