Unknwn Error when Saving as Slef Contained Movie..Please Help

I am trying to save a movie in Quicktime that is about an hour and 15 minutes. I am trying to save it as a self contained movie but when it gets about 10 minutes in it gives me an Unknown Error (-2125). I also added a mask to this movie, I'm not sure of that is the problem but I don't think so because my co-worker doesn't have a problem with his computer at home. Any help would be much appreciated, Thanks!

What is the source of the file and where is it stored?

Similar Messages

Word 2007: Error when saving file that contains equations

Using Microsoft Word 2007, version 12.0.6425.1000 with Service Pack 2
I am a High School Math teacher, and when working on a document that contains a number of math equations. When I try to save the document, Word refuses to save. It displays the following error: "A file error has occurred. <filename>. OK",
and I am unable to save the file.
Reading the forum, I have found this to be a very common issue going back to 2009, but I have not seen a definitive solution or patch.
I have found a workaround:
Creat a new document
Copy and paste from the corrupted doc each page, saving the new document after each page
Until I hit the error, then I know the page that has the issue, and can usually narrow it down to a specific math equation. Nothing fancy just some basic math.
Manually rewrite the equation in the new document and it will successfully save.
But the issue has been occurring more and more frequently now and it is becoming very frustrating. Any help would be greatly appreciated!

There has been a long time known issue with the equation editor. it causes document corruption by "losing" XML tags.
Apparently fixes for some causes of these problems have been rolled out in Windows updates. But the problem still exists. You've got it easy. A lot of people running into this problem are students working on documents, like a thesis, that is on a short
deadline ...
One identified cause of these problems is editing equations
after you created them. DON'T DO THAT!
If you have to change an existing equation, create a new correct one and delete the old one.
Simpler fix. Don't use Word (or Office) for creating equations. Find some other product, like a pencil.
Over in the "Answers" forum there are a couple volunteers, Tony Jollans and Jeeped
, who have been manually fixing this type of error if you post a new question or add a reply to one of the ongoing discussions on this issue.
Sorry.
If you want to invest the time to figure out what your error looks like you may be able to come up with a fix other than copy /paste method.
Can't open Word File because of end tag/start tag mismatch error... XML Tag
- XML Error – Fix It tool - “The name in the end tag of the element must match the element type in the start tag”
This error is caused when Word either “forgets” to write an XML tag, or writes them in the wrong order.
Tony Jolans was the first person that I heard of with home made tool to fix the problem. Now MS has released a Fix It for one specific variation of the problem.
If the tools don’t fix your problem, the file will have to be fixed manually, repairing the tag order.
The Fix It article notes that the document is still in a fragile state. You have to do some addition fixing to avoid repeats of the problem.
https://blogs.technet.com/b/wordonenotesupport/archive/2011/03/24/error-when-opening-a-word-2007-or-2010-document.aspx
http://support.microsoft.com/kb/2528942- FIX IT
This fix it will work for one specific tag error where there are equations and graphics in the same paragraph AND Office 2010 SP1 has not been applied.
Preventative suggestions
<snip Jeeped>
I don't think that anyone can completely stop editing equations, but pre-planning them should avoid unnecessary edits.
While I have no concrete, reproducible evidence that editing equations is a cause, I have made these empirical observations:
I cannot state precisely what many of the DOCX XML tags do, but basic XML syntax rules would suggest that code like:   <m:oMath><m:e><m:ctrlPr/></m:e></m:oMath>
... does nothing at all since it closes everything it opens and offers no content. It looks to me that this is a result of deleting one or more characters from an equation.
While Word 2010 reports these as a problem at: Line: 2 Column: 0 ... Word 2007 will still report the actual position, e.g.:
Line: 2 Column: 2726981 I keep a copy of Word 2007 side-by-side Word 2010 for no other purpose. It's the only Office 2007 program on my computer. This seems like it is actually a step backwards from a resolution since Word 2010 no longer seems
to be able to parse its own error.
Whether the syntax is truly useless and non-effective for any intent or purpose is actually beside the point. The syntax passes conformity tests and the DOCX
should launch. Why an 85 page document is 'broken' due to a few empty XML formatting tags while retaining legal syntax structure is beyond me.
I try to pass along the area that the problem was in and several times people have remarked that the area I report was the place they were last making modifications/deletions to equations (not additions) when the no-load corruption
occurred.
When no indication from the OP is offered on what was worked on last, the Line: 2 Column: 0 corruption often comes within a formula at the very end of the unfinished Word/Document.xml file and it may be inferred
that this was the last place being worked upon.
The corrupt DOCX files I've worked on are very commonly at the last stages of development with a large complex document. While there couldn't be a worse time for a corruption to appear, it would seem that small edits to existing content are causing
it and not large scale new content generation.
Not one of these points is a definitive 'smoking gun', but put together they seem to indicate
formula editing and not formula writing as a cause for the Line: 2 Column: 0 corruption. If it looks like a duck and quacks like a duck, it is most often a duck.
</snip>
Copy “True Autosave Macros for Office” to this place in reply
Let me fix it myself
If you are familiar with editing XML, you can try to fix the problem yourself by correcting the sequence of the mismatched oMath tags in the document. See the following example:
Incorrect tags:
<mc:AlternateContent>
<mc:Choice Requires=”wps”>
<m:oMath>
</mc:AlternateContent>
</m:oMath>
Correct tags:
<m:oMath>
<mc:AlternateContent>
<mc:Choice Requires=”wps”>
</mc:AlternateContent>
</m:oMath>
Note: You will have to use an application such as Notepad to edit the XML.
Manual Technique
<snip> A DOCX document is actually a .ZIP file that contains many internal components. There is an internal folder called word which will always contain a document.xml file. This file is the basis of the document's layout
and content.
Assuming that the DOCX archive structure has not been corrupted, it can be opened in an archive utility. I use
WinRAR for this. Once opened in
WinRAR, you can drill down into the
word folder and see the document.xml file. I use
Notepad++ as a text editing tool and have the .xml file extension associated with this program so i can simply double-click
document.xml in WinRAR to open an editing session.
Notepad++ has cursor positioning in the right-hand side of the status bar and finding the position of the error (supplied by a failed open in Word) is pretty straightforward. I look for empty formatting
tags first and only remove content if removing empty tags does not allow the document to be opened. I try to note existing content in the area that I make modifications in order that I can supply position reference information to the owner of the DOCX.
When editing, I assume the philosophy that kess is more. My target is to get the document to open in Word with as little modification as possible and let the original owner of the DOCX make any necessary adjustments.
I should mention that after making a change to word/document.xml you need to save it in
Notepad++ then go to
WinRAR and acknowledge that you want to update the file in the DOCX archive. Once the archive is updated, you can attempt to open the DOCX in Word to see if your efforts are successful.
WinRAR
Notepad++
</snip>
Further Fixes
The Fix it solution in this article should let you recover your Word document. However, the symptoms will reappear when you make any further edits to the document unless the core problem in the structure of the document is resolved.
To try to correct the core problem, follow one of these workarounds:
Install Office 2010 Service Pack 1
Office 2010 Service Pack 1 resolves this issue for new files. It will also prevent the problem from recurring with any files that were recovered with the Fix it solution in this article.
To download Office 2010 Service Pack 1, follow the steps provided in this Microsoft knowledge base article:
2460049 - Description of Office 2010 SP1
Grouping Objects
The steps provided work best under Word 2010:
After you open the recovered document, turn on the Selection pane. This can be found in the
Home tab of the ribbon. The editing group of the
Home tab has a dropdown button named Select.
Click the Select button, and then click
Selection Pane...
Press the Ctrl button on your keyboard and then click each text box in the selection pane.
Click the Group button under the Format tab. This will group all the objects together.
As soon as you have all objects grouped on each page, save the document under a new name.
Save the document in the .RTF file format
The steps provided work for both Word 2007 and Word 2010:
After you open the recovered document, click File and select
Save (for Word 2007 click the Office button and select
Save As)
In the Save As dialog box, click "Save as type:" dropdown and select
Rich Text format (*.rtf).
Click Save.
Click to view this
blog for more information about this issue.
Bonus tip: Win7 Win8 Math Equation Input Panel / Math input Panel
http://www.lytebyte.com/2009/07/24/guide-to-math-input-panel-in-windows-7/
http://www.7tutorials.com/windows-7s-tablet-input-panel-text-entry-and-handwriting-recognition
http://www.7tutorials.com/training-tablet-input-panel-work-even-better
http://www.7tutorials.com/do-math-easy-way-math-input-panel
Not an answer to the problem, just a bonus that may make it easier to input formula’s in Win7.
Here’s another one of those didn’t-know-it-existed-until-I-clicked-it-by-accident tools in Win7. It’s called the
Math Input Panel.
To access it, simply click Start, and in the Search Box that appears above, type in
Math Input Panel.
The Window should look like this:
Let the fine folks at Microsoft explain what it’s used for:
“Math Input Panel uses the math recognizer that’s built into Win7 to recognize handwritten math expressions. You can then insert the recognized math into a word-processing or computational program. “
Tony Jolan’s Automatic Fix
Download http://www.wordarticles.com/temp/Rebuilder.dotm Microsoft Office Word Macro-Enabled Template (.dotm) and open it.
Click Options button on the Security warning and select Enable this content.
Click the Broken Documents tab at the far right of the ribbon.
Click the Rebuild button in the left-hand side
Locate and open your corrupt document in the file open dialog.
That's it. The process will repair your document if possible and create a new document with (Rebuilt)
appended to the filename. Be patient as it may take a few minutes. If a repair is not possible, you can then post to a public file area and someone here can attempt a manual repair.
Manual Fix
XML Maker V1.1 is free. It will allow you to open the document.xml file and edit it. It also marks errors and warnings.
I just didn’t have much luck working with it.
A poster used XML Maker V2.1 (US$125, 30day free trial, enough for average person to fix a file)
Notepad ++ is a good, free editor for this type of task
Make a copy of the file
Rename the copy from DOCX to ZIP
Open … .ZIP/word/document.xml in notepad
Copy the contents of the file to clipboard
Open Word
Paste a copy of the copied XML into Word
(optional) the XML is one long string too hard to read, you can replace some tags, with that tag plus a para mark to break up the text to make it more people readable.
Open an XML validator, ie this site on the internet:
http://www.w3schools.com/xml/xml_validator.asp
Paste another copy of the XML into the “Syntax Check Your XML” input window
Click on “validate” button
Copy the missing tag, ie </mc:Fallback> (yours will be different)
Return to word Find: mc:Fallback> (without the </ so you find both open and closing tags).
Repeat find until you hit 2 open tags in a row. Then you just have to figure out where to put the closing tag between them.
Look for other tags before and after a proper closing tag so you can match the problem area to a good area.
Discussion by many affected people, a couple in discussions are also fixing problem if Tony’s fix doesn’t work
http://social.answers.microsoft.com/Forums/en-US/wordcreate/thread/581159d0-9ebc-4522-b30c-53e33e8268e1
Document Recovery
http://www.wordarticles.com/Shorts/Corruption/Formats.php
This page has the most readable description of Word file structures, DOC and DOCX, I have seen so far
The logical structure of a Word 97‑2003 format document is one of a series of elements arranged in a hierarchy, much like a mini file system. As an example, here is the structure of a simple Word 97‑2003 (.doc) format document:
MyDocument.doc
1Table
*CompObj
Word Document
*SummaryInformation
*DocumentSummaryInformation
The physical structure of the complete file bears little relation to the logical structure; it is, again, of a proprietary design, a compound, or structured storage, file. Briefly, and loosely, the separate logical elements of the file are broken up into
blocks; these blocks are treated as individual units, which units are then organised without regard for their logical arrangement, and catalogued, catalogue and organisation detail being held alongside the blocks themselves, to enable recombination into logical
components when necessary.
Just to give you a flavour, here are some views of three small parts of such a document, viewed in a hex editor:
Views of a Word 97-2003 format Document
The logical structure of a Word 2007 format document is one of a series of elements arranged in a hierarchy, much like a mini file system. As an example, here is the structure of a simple Word 2007 (.docx) format:
MyDocument.docx
_rels
rels
docProps
app.xml
core.xml
word
_rels
document.xml.rels
theme
theme1.xml
document.xml
settings.xml
fontTable.xml
webSettings.xml
styles.xml
[Content_Types].xml
As briefly as before, the [Content_Types] file and the _rels folders, along with the subordinate files therein, contain information about the logical structure, and the two files in the docProps folder contain much the same as the two Information files
in the old format. The document.xml element within the word folder holds the bulk of the document content and the other files within that same folder hold formatting details.
So, you might say, the internal structure of a document has changed a little, so what? There are, however, other changes that make a bigger difference. The first is that, although both logical formats are conceptually similar, they are wrapped up in
completely different ways to make a single file. Instead of the proprietary physical structure used for Word 97‑2003 format documents, a fairly standard, and open, Zip Archive format is used for Word 2007 format documents. The second change is that instead
of using obscure binary codes, everything in Word 2007 format documents, well almost everything, is held in XML format.
All data held as XML? In a standard Zip Package? It should be much easier to work with, then? Judge for yourself; here are some views of parts of a Word 2007 format document taken from a hex editor:
Views of a Word 2007 format Document
FreeFileViewer – reads 100+ text, Office, audio, video format file types – Can open some XML tag error files
http://www.freefileviewer.com/formats.html
Can't open Word file due to undeclared prefix, Location: Part: /word/document.xml, Line:91, Column: 49921
The most likely cause of your particular problem is that you are missing a
schema prefix reference within the opening <document ...> XML tag (usually the second one). Different
schema references are required for various types of specialty content. Here is a sample opening <document ...> tag with a large number of various schema prefix codes. If I remove one or two of these, i can reproduce
your error message.
<w:document xmlns:ve="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:r="http://schemas.openxmlformats.org/officeDocument/2006/relationships" xmlns:m="http://schemas.openxmlformats.org/officeDocument/2006/math"
xmlns:v="urn:schemas-microsoft-com:vml" xmlns:wp="http://schemas.openxmlformats.org/drawingml/2006/wordprocessingDrawing" xmlns:w10="urn:schemas-microsoft-com:office:word" xmlns:w="http://schemas.openxmlformats.org/wordprocessingml/2006/main" xmlns:wne="http://schemas.microsoft.com/office/word/2006/wordml">
It's impossible to blindly say exactly what you are missing but if you post an unadulterated copy of your document to a public file area (as noted above) and post the location back here, someone may be able to help. If you are going to go this route, send
a copy that has not already been subjected to repair attempts.
FWIW, while it may be hard to determine exactly which schema you may be missing, I do not believe that having extras causes any problems.
BTW, you don't actually have to rename the DOCX file extension if you have an archiving program. I use WinRAR and simply
<right-click>, Open With... to expose the archive.

Error when trying to sign the Applet, please Help

Hello,
I have this Error when I am trying to sign my applet, after execut this command :
jarsigner -verify -verbose -certs test.jar
jarsigner: java.lang.SecurityException: invalid SHA1 signature file digest for classe/JDBC_SQL.class
And for your information, that I had add the JDBC_SQL.class to the jar file (test.jar) because I made some change to the file JDBC_SQL.java
so please if you know what can I do to resolve my problem
Thank you to reponse !
rania +

ahh, here is a problem. u made changes to the JDBC_SQL.java and packed the jar file. u have to sign the jar file again.
let me know if u need futher assistance

1602 and 1604 Errors When Attempting to Restore/Update iPhone - Please Help

Hi, I've been having trouble with my iPhone 3GS and after wasting many days on trying to solve the problem, I am reaching out for help from those more knowledgeable than me. I have been having this problem for as long as I can remember (I've owned my iPhone for just under a year): whenever I attempt to Restore my iPhone or update its OS, I receive a 1602 or 1604 error on iTunes and the process stops with the iPhone wiped. iTunes refuses to continue the Restore and any further attempts result in the same error. I originally found this work around for the problem after an exhaustive search (4th post down):
http://discussions.apple.com/thread.jspa?threadID=1363589
However, every time I wish to Restore or update, I have to follow these long, annoying, unusual steps, and, now that I am coming to the end of my year's warranty, I really want to fix this problem, or get it fixed by Apple if this is not possible.
The iPhone restores with no problem on another computer in my house, so I guess the problem is with my computer. I have taken the following steps (often many times over and in combination with each other) in my attempts to fix the problem, but with no success:
1. Uninstalled and reinstalled iTunes
2. Uninstalled and reinstalled iPhone drivers
3. Uninstalled and reinstalled all Apple software and drivers
4. Removed iTunes library, all music and any other iTunes files in music folder
5. Created a new user account, which is free from any old iTunes settings, opened iTunes and plugged in iPhone
6. Used different USB ports
7. Plugged in iPhone after being restored on other computer
I'm running out of ideas. Can anyone please help?
Thanks,
James

I had all of these problems, and I was able to fix them with the following process. Here is what I did:
My setup:
Apple Max OS 10.4.10, Mac G4, with 3rd party USB 2.0 card.
1. Upgrade to iTunes 7.6 and Quicktime 7.4, Restart and repair permissions
2. Purchase the iPod Touch Upgrade - It took two tries to purchase. I had to accept to two agreements, and then got an error. I purchased the upgrade again and got an instruction screen. iTunes appeared to download a very small file.
3. Sync my touch (I still had not upgraded to firmware 1.1.3)
4. The touch synced, but I had no new functions.
5. I clicked upgrade, and downloaded the 165GB file.
6. While the file was downloading I undocked my iPod touch and restarted it.
7. When the download was complete, it gave me an unknown error because my iPod was not connected.
8. I connected My iPod and tried to install the update. After several tries, I always got a 1602 error.
9. I restarted my computer and did a hard restart of my ipod touch. This did not work, I still had 1602 errors.
10. At this point, I chose to RESTORE my iPod Touch.
11. After the restore, I chose not to restore any content, and just tested the firmware update. EVERYTHING worked great!
12. I synced my iPod touch while I watched the keynote. 45 minutes later my sync was complete and 14 Gig of content was restored. The new functions are great. I have already read my .Mac email.
Message was edited by: gotabmac

Black Screen when trying to play iTunes Movies PLEASE HELP

This is my set up. I have an iMac running OS X (10.5) and a mac mini running (10.6) this mac mini is hooked up to my tv in the living room, it also is fitted with an external hard drive (this is where my itunes media folder is located for my mac mini). I enabled home sharing on both macs and they are both authorized to play my media. I recently downloaded two movies on my iMac and transferred them to my mac mini. Now here is the problem. I can play the movies fine on my iMac but when i try to play them on my mac mini all i get is a black screen with no sound. The movie is playing on the mac mini because i see the time bar moving but nothing is on the screen.
Please help.

In an attempt to consolidate numerous threads about video problems with Flash Player 11.2.202.228 I've created a new post where I'd like to have people who are still encountering this issue to either post or link to an existing post with their information.
Video investigation with Flash Player 11.2.202.228
We're asking for 4 pieces of information
1. A brief explanation of the problem
2. Did disabling hardware acceleration fix the issue
3. A sample URL
4. A copy of your dxdiag report
If you've already provided all 4 answers to us, thank you and please take a minute and copy the URL of your post (right click on the highlighted title of your post as shown in the example screenshot below) and paste it as a reply so your input is not lost.
If you haven't provided these answers, we ask that you take a few minutes and create a new post with the required information.

Errors when applying sql expression on filter, please help

Hello guys
I was trying to put a filter on the date column and filter between timestampadd(sql_tsi_day,-31,current_date) and current_date
I was successfully able to define both field on sql expression of the filter and I selected "is between"
However when I run reports it returns the following errors:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 22024] A comparison is being carried out between non-compatible types. (HY000)
SQL Issued: SELECT "Year"."Transaction Date" saw_0 FROM tranSale_cube WHERE "Year"."Transaction Date" BETWEEN timestampadd(sql_tsi_day,-31,current_date) AND current_date ORDER BY saw_0
When I using the same timestamp expression on the column formula and run report without filters, the report will return the correct date however though
I am using essbase as the data source.
Please help
Thanks

Thanks
However, the error still exist the same.. This error code returns when I run report based on this one single column
when I put this date column with measures and other columns then run report, I get a different error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 42043] An external aggregate is found in an outer query block. (HY000)
SQL Issued: SELECT Product."Brand Name" saw_0, "Up Level"."Trial - level 12" saw_1, "Year"."Transaction Year" saw_2, "Year"."Transactoin Month" saw_3, "Year"."Transaction Date" saw_4, tranSale.count_of_transactions saw_5, Avg(tranSale.count_of_transactions by "Up Level"."Trial - level 12", "Year"."Transactoin Month", Product."Brand Name") saw_6 FROM tranSale_cube WHERE ("Up Level"."Trial - level 12" IN ('0', 'Product Upsell')) AND ("Year"."Transactoin Month" >= '2009 Feb') AND ("Year"."Transaction Date" BETWEEN timestampadd(sql_tsi_day,-31,current_date) AND current_date) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4
I believe it must be something with the essbase that is not serving OBIEE well. Because I tried the same filter on a different environment not having essbase, it return me the right results..
Could anyone help?
Thanks

HT201413 how to fix (-1) error on itunes resotre my devise is keep giveing this error when im trying to restore it please help!!!

if anyone had this problem could you please help me

Have you checked the Apple support site? If not, take a look at this -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
If you've used some progam with your iPod that wasn't made by Apple, it might have modified the host file.

Multiple errors when opening my project file. Please help!

Hi Everyone,
I'm new to the forum and I hope someone can help me with a problem I'm having with opening a specific .aep.
My project crashed. I tried reopening it, but from then I've been getting the following error messages. While restarting my system or AE usually helps, this time the project wouldn't reopen no matter how I approached this.
Steps I've taken so far:
-Restarting my computer.
-Restarting After Effects
-Importing the .aep file into AfterEffects
-Opening the file on a different computer.
-Trashing preferences and reopening the Project in AfterEffects.
-Opening one of my 5 at a 15 minute interval generated Auto-save files.
All result in the same error.
Please see attached images to see the error I'm getting.
The final message can't be clicked away and when I click the exit button at the top right of the application the application crashes and prompts me with a default windows error screen.
Used source footage:
XDCAM files in a .xmf container
I really hope someone can help me with this problem. Our deadline was yesterday so any help would be much appreciated
Thanks in advance,
Lars
Some information about my system:
After Effects CC (version 12.0) with all recent updates from the cloud as of 21th of august
Windows 7 Professional
Service Pack 1
Dell Precision T3500
Intel(R) Xeon(R) CPU W3550 @ 3.07Ghz 3.07Ghz
8 GB RAM
64-bit operating system
Wacom Intuos 4 large pen tablet
QuickTime 7.7.4

Solved!! I moved the two plug-ins that were giving me an error and tried to reopen the project. This time I could reopen it.
Saving the file under a different name now worked and I could continue working on the project. However the composition containing the rotoscoped footage got lost in the process. I just redid this part and rendered the rotoscoped footage as a separate RGBA quicktime to prevent the same thing from happening.
So happy 50 hours of work were still alive
Hope this helps anyone experiencing the same problem.

ITunes DID recognize new iPad mini, error when updating, now doesn't. Please help. I have a 700 dollar paperweight now.

Today I bought a brand new iPad mini 2, 32 gb. First, I backed up my old ipad mini to my hard drive. Then, I updated iTunes to the newest version. Then, I plugged in the new iPad mini, went through the set up, iTunes was working fine. I registered the iPad, then it suggested i update the iOS on the iPad. This is where things went south. After a few minutes, it stated "cannot update iOS 7 at this time" or something to that effect. Since that point, iTunes will not recognize the iPad. The iPad shows the "connect to iTunes" screen. When I plug it in, I hear the tone suggesting a new device is connected, but nothing happens. I've tried it in DFU mode, no results. I've tried putting it in recovery mode, nothing happens, just the same screen. I've uninstalled iTunes and reinstalled it, following every step suggested through this site/apple support. I even uninstalled and installed an older version of iTunes (10.7) but same result. I've followed all troubleshooting steps, and nothing is working, so please don't suggest the same olf "iOS: Device not recognized in iTunes for Windows" page.
What should I do? Do I have to take this to the geniuses at the store? Will they even be able to help without having access to my computer?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

I'm trying to use the public library to access my icloud email and I keep getting an error message stating icloud is encountered an error when connecting to the server. Please help.

I am trying to access my icloud email via a public library and I keep receiving an error message that icloud is experiencing a problem connecting to the server. Please assist.

How are you trying, using a web browser?

Error when I turn on my phone, please help :(

So I just bought my M4 15 days ago and last night suddenly it started to turn off itself. When I turn it on, it turn on but not completely turn on. It just turn on the loading part wave. But vibrates from all messages and chats still comes and I can't turn it off again, it just turn off itself when it runs out of the battery... And when I charge, and turn it on again, it back to the loading part wave. I already tried to restart with pins but it didn't work... What should I do? Please :"

I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.

"General Error" when I export to quicktime movie .mov

I have no idea why all of a sudden FCE4 says "General Error" when I export using quicktime movie... If i use another option like mpeg4 or other it works fine. What could be a problem?
I have lots of memory.

I made the movie self contained and it started but then stops at 10%. This isnt anything complex just a few clips edited together w/ music. I just want to upload to youtube. I have no idea what the deal is!

Error when saving

Hello BW Experts,
I am getting this error while saving a query in Bex.
'The query could not saved due to a problem in transport'.
I am actually creating a test query production. I am not sure why it is refering to the transport. From what i understand there is nothing to deal with transports.
Anyone experienced a similar problem before.
Suggestions appreciated.
Thanks,
BWer

OSS NOTE 194051
Symptom
An error occurs when you save a query:
Error when saving
"The query could not be saved due to a problem in transport".
Other terms
Business Explorer, query, transport, save, R9 124
Reason and Prerequisites
There are 4 possible reasons for this problem:
1. The BEx default transport request or the development class-dependent transport request is not maintained or released in the Administrator Workbench.
2. The system is set to "cannot be changed". Refer to Note 337950 (as of 2.0b SP 11), which describes how query objects can be edited in systems that cannot be changed.
3. You are not authorized to write to Workbench requests.
4. The BEx default transport request or the development-class-dependent transport request in the Administrator Workbench has another target system than the query (the transport destination of the query is determined via the transport layer of the query's development class (as of 3.0: of the package)).
The error only occurs for query objects which already have a development class, that means, which were already placed on a transport request.
Solution
Solution for Cause 1:
a) Start the Administrator Workbench
b) Choose 'Goto' to change to Transport connection
c) Choose "Request BEx" or "BEx development classes" in the toolbar.
d) Create a (new) request.
e) All changes in the BEx are now written to this request.The end user is no longer confused by 'Transport' dialog boxes.
Solution for Cause 2:
See Note 337950
Solution for Cause 3:
Authorize user to write to Workbench requests.
Solution for Cause 4:
Create a request for each target system. Assign the request suiting the target system of the transport layer of the development class (of the package) to each development class (as of 3.0: to each package) used for BEX objects.
If this does not change the situation, further information is useful for error analysis.
Go to Transaktion SE16, Table RSZCOMPDIR. In field COMPID, select the technical name of your query. Read the COMPUID of your query.
Go to SE37, function module rso_elem_get_related. Parameter I_IOBJNM is set to the COMPUID, and parameter I_OBJVERS (object version) is set to A. Only the export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT are of interest.
These entries are then entered in function module rs_tr_objects_check_insert in import parameter I_T_TR_OBJECT. In this parameter, fill field PGMID fixed with 'R3TR' and field OBJECT fixed with 'ELEM'. Field OBJ_NAME is filled with the contents of field OBJNM from export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT. The other fields are not relevant.
The export parameters of this function module are required for further error determination. Add this information to your OSS message. The table of messages E_T_MSG is important in particular.

Font licensing error when Saving?

I use Illustrator CC and get a licensing error when saving designs with downloaded fonts.
The designs look fine on my computer and fine when I open them from my drop box account.
The problem comes when others open the design, the fonts change to Arial in most cases, which is causing design issues.
This is even happening when the design is saved as a PDF.
How do I solve this problem?
Can I get licenced fonts?
Where are they available?
Many thanks for reading.

You can have your other contacts download and install the same fonts
or
you can select all the text in your document and create outlines of the fonts, printers often ask for this option.
or
You can purcahse fonts from say Adobe and if I am not mistaken you can have those installed on five work stations, I do not know if you are allowed to consider a colleague as legal user of the fonts. And I do no recall if the number of seats for the fonts have changed but it used to be five seats. As I recall.
or
you can purcahse from My Fonts as well http://www.myfonts.com but again the other contacts ave to have the fonts installed as well check out how many seats for the fonts ypoouare entitled to and if that includes remoe sites for the seats.

I get an error when you play a rented movie, also happens to me with the purchased music.

I get an error when you play a rented movie, also happens to me with the purchased music.

Welcome to the Apple Community Jebson.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Restart the Apple TV (Settings > General > Restart).
    2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    3.    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    5.    Restore the Apple TV (Settings > General > Reset > Restore)

Unknwn Error when Saving as Slef Contained Movie..Please Help

Similar Messages

Maybe you are looking for