Unloading a flash movie using Safari browser
I have MAC 10.4 and safari 2.0 browser.I run a flash movie(Instruction.swf) and after that the actual test for the student run.So while running The first movie i.e Instruction.swf I am not able to unload that movie using javascript in Safari 2.0 browser so that the actual test can run.It just hang up after finishing the movie.While in the other Mac and windows it is working fine.
Please Help me.
Thanks In Advance.
Welcome to Apple Discussions!
Do you mean to say, in other Mac and Windows web browsers it is working fine? If that's the case, it sounds like the version of Flash plugin used by the Safari plugin is probably older than the one used by the other web browsers.
With Safari Enhancer's enabling of the Debug menu you can force certain webpages to open in other web browsers. That would help streamline your viewing of those pages.
http://www.lordofthecows.com/safari_enhancer.php
You can also enable the Debug menu with:
defaults write com.apple.Safari IncludeDebugMenu 1
from the Terminal.
Similar Messages
-
How to watch flash based videos without adobe flash installed using Safari
How do I watch flash based videos without adobe flash installed using Safari?
Once you have Chrome installed, activate the Develop menu in Safari (go to Safari Preferences > Advanced > Show Develop Menu). You then will see under the Develop menu the Open Page With option and Chrome will be listed there.
So each time you open a page with Safari requiring Flash, you use that menu option to open the same page in Chrome. -
Problem Opening Hyperlink on Adobe .pdf Docs Using Safari Browser
Does anyone have a problem opening a hyperlink on .pdf documents using Safari browser on iPhone or Mac computers?
Kimmerdog, Would you please rewrite your sentence "you have to publish the document it to the repository". And what is a repository?
-
No Data retrieved with AJAX Call HTMLDB_GET when using Safari Browser
In my apex (4.0) app i have certain page a which uses JS AJAX htmldb_get to pull some data from an on-demand process using xml structure
var get = new htmldb_Get(null, $v('pFlowId'),
'APPLICATION_PROCESS=get_markerdata', $v('pFlowStepId'));
if (!MEBMarkerdataXML) {// Tabelle mit Kunden leer? Dann aus DB abfragen
MEBMarkerdataXML = get.get('XML');
l_Count = MEBMarkerdataXML.getElementsByTagName("Kunde").length;
I ran into a strange behavior when using Safari Browser (Mac and Windows) when opening the page.
As long as the process retrieves less than 50 rows everything works fine. The data is pulled from the OnDemand Process and delivered to the browser; the XML Data can be selected in JS for further processing
<<<<<<<<<<<<<< HTTP Traffic taken from Safari <<<<<<<<<<<<<<<
Anfrage-URL:http://80.149.218.10:8080/apex/wwv_flow.show
Anfragemethode:POST
Status-Code:200 OK
Anfrage
Content-Type:application/x-www-form-urlencoded
Origin:http://80.149.218.10:8080
Referer:http://80.149.218.10:8080/apex/f?p=41107101:43:1599514482232751::
User-Agent:Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3
Formulardaten
p_request:APPLICATION_PROCESS=get_markerdata
p_instance:1599514482232751
p_flow_id:41107101
p_flow_step_id:43
Antwort
Cache-Control:no-cache
Content-Type:text/xml;charset=UTF-8
Date:Thu, 03 May 2012 10:19:35 GMT
Pragma:no-cache
Server:Apache-Coyote/1.1
Transfer-Encoding:Identity
X-DB-Content-length:53329
X-ORACLE-IGNORE:IGNORE, IGNORE, IGNORE, IGNORE
<<<<<<<<<<<<<<<<
When calling for more then 50 rows Safaris shows a POST Error -1001 and no Data is delivered.
This occurs only on some Mac's and my Dev WIN-XP PC using SF Browser; never on iPad/iPhone . Never when using FF on Mac or PC.
I googled a lot of different Sources, it seems to be a Timeout Problem when making a long runing AJAX Call. But i did not find any useful hint.
Any Ideas from the APEX & HTTP Gurus?
Regards
PeterIt's just that in my experience htmldb_Get.get() is troublesome for browsers, due to the fact it performs a synchronous request. The browser can do nothing else while it waits for the response. I've seen Firefox really struggle with it in the past couple years. Also, I've seen no good reason to use synchronous XMLHttpRequest calls. As you can see, it's simple to refactor a call to htmldb_Get.get() into a call to htmldb_Get.GetAsync().
For your case in particular, I was just guessing Safari have implemented a timeout to ensure that they don't end up waiting indefinitely for a request that never returns as this would be fatal. You're probably hitting that timeout.
I don't think htmldb_Get is officially documented anywhere, but you can find the source here... http://apex.oracle.com/i/javascript/uncompressed/apex_4_0.js
There is also a pure jQuery way to perform AJAX request, I recommend using this because at least it's documented. Here's a snippet of a typical APEX AJAX request done the jQuery way:
apex.jQuery.ajax({
dataType: "xml", //supports text, xml, json, jsonp, script, or html
type: "post",
url: "wwv_flow.show",
traditional: true,
data: {
p_request: "APPLICATION_PROCESS=get_markerdata",
p_flow_id: $("#pFlowId").val(),
p_flow_step_id: $("#pFlowStepId").val(),
p_instance: $("#pInstance").val()
success: function (data, textStatus, jqXHR) {
// Do your thing in here
error: function (xhr, ajaxOptions, thrownError) {
// Handle error in here
});Then you can refer to great documentation here... http://api.jquery.com/jQuery.ajax/ -
Logging in SAP forum using Safari browser
O.k guys, new to the forum. My first question will not be on financial but definitely expect a lot in the coming days. I am having trouble logging into SAP Forum using Safari browser. Every time i give user Id and password it will pop up a new window and asks me to select a certificate but i don't see any certificate in it. I am able to login to the forum using firefox, can some guide me how to go about this?
I just posted exactly the same problem but have't solved it yet. It is of course pretty weird that a free program like Firefox does the job wheres a paid product like Apple with Safari has problems. I keep searching for Safari did it very fine in the past for me. I suspect it is somewhere in the preferences.
-
My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
Someone please help.
ThanksI would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cache, history and cookies. -
Slow Flash movies in Safari and Firefox
This issue started right after the software update of Safari 3.2.1 (from 3.2). I'm totally lost, because it does not make any sense to me. The performance on Flash websites with either Safari or Firefox, is extremely slow and stuttering. Fade-ins and outs are no longer smooth, I can even HEAR their "calculating".
What confuses me most is the fact that watching my self-created Flash movies as swf files is perfectly fast and smooth. As soon as they are being viewed in a browser, local on the computer or on a web server, they are slow.
Here's what I already did, and it got somewhat better, but not back to how it was before the software update:
- reset safari, empty cache.
- uninstalled and reinstalled the latest Adobe Flash Player plug in.
- repair disk permissions
- add DNS codes
- I even upgraded the RAM's to the PB's max of 2GB
Anybody got any ideas? I was thinking it might be the video card. But why would the Flash movie show smooth as an swf file but not in a browser?? And why was everything OK before the update?
I read that the video card is part of the logic board. Is it possible to exchange that at all?? This is what's installed: ATI Mobility Radeon 9700, VRAM 64 MB.
Thanks in advance for any inputs!!I figured out the problem/cure. I had help, though not from this website... However, I thought I'm going to post the solution here, in case someone else is experiencing the same problem! It turned out that it was not the update to the latest Safari (3.2.1), but the latest Adobe Flash player version (10) that caused the bug. Apparently older Mac's (I'm using the 1.5 GHz PowerBook G4 aluminum) cannot handle the latest technology of Flash player 10.
I uninstalled the plugins, using Adobe's Flash player uninstaller, downloaded the Flash player 9 folder here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=2 and installed version 9.0.151.0. Repair disk permissions. That's it. Everything is back to normal!!
If this was helpful to anybody, I'll be happy to hear from you! -
Unloading external flash movie
I am using this script to load a swf file into a mc:
var imageRequest:URLRequest = new URL Request("movie.swf");
var imageLoader:Loader = new Loader();
imageLoader.load(imageRequest);
addChild(imageLoader);
This works great. Now what script do I use to unload the
movie.swf?
MMWelcome to Apple Discussions!
Do you mean to say, in other Mac and Windows web browsers it is working fine? If that's the case, it sounds like the version of Flash plugin used by the Safari plugin is probably older than the one used by the other web browsers.
With Safari Enhancer's enabling of the Debug menu you can force certain webpages to open in other web browsers. That would help streamline your viewing of those pages.
http://www.lordofthecows.com/safari_enhancer.php
You can also enable the Debug menu with:
defaults write com.apple.Safari IncludeDebugMenu 1
from the Terminal. -
Flash movie in Safari in Macbook Pro Retina Display zooming issue
Hello,
On Macbook Pro Retina Display in Safari browser, zooming any flash application in browser does not work properly.
I have made a YouTube video showing the problem in action:
http://www.youtube.com/watch?v=bi1d1x8bpnA
When I zoom in and out using two fingers pinch zooming does not go as expected - it is zooming into bits outside of the zoom area while the zooming is in the process.
Please fix the issue.
Thanks.
Andrey
P.S:
I have also created an Adobe BugBase bug report here:
https://bugbase.adobe.com/index.cfm?event=bug&id=3323043Hi Steffen....!!
The phenomenon which you just described is absolutely not common in the late 2013 retina macbook. Even I have the same model but I have never noticed such sounds neither during normal operations nor after tilting it.
I am afraid, but it seems to be a hardware issue. Might be because the fan assembly has become loose due to which its touching the other parts.
There is also a possibility that some dirt or small piece of something might have gone inside the macbook through the air vents which may be interfering with the fan mechanism. I think so you can try to open the back cover of the macbook and see if something is interfering with the fans if your macbook is out of warranty. If its covered with Apple care, I suggest take it to Apple store and let them diagnose the issue.
Hope this helps...... -
G4 PPC OS 10.4.11 unable to install Flash Player using Safari
Need help installing the correct version of Flash Player onto my PowerBook G4 OS 10.4.11
What browser works the best, I'm currently using Safari, but Someone out there knows what settings/browser and the right combination to use. Iv'e done at least 10 uninstalls and installs today nothing seemed to work. Need to download You Tube and VIMEO content for work and im stuck in the mud. Please advise. Thanks.I hate to be the bearer of bad news, but you will likely find that you're out of luck in this situation. The latest version of Flash Player, which far more often than not, will be required to view these videos will not work with a PowerPC processor or the version of Safari that you have (Safari 3 I believe is the last one that works with Tiger).
You can find older versions of the player at oldversion.com under the Mac page or here at adobe.com, but you will probably have troubles playing the videos with Flash Player 8.
Your best Bet is to get Firefox, download an add-on called DownloadHelper which will allow you to download the FLV files even if you can't see them in the browser, then download and use VLC Media player to view them. -
Embedded Flash movie locks up Browser
It doesn't seem to matter which of the top three
browsers I use, but most often when you go to
a website page that automatically (or not?)
launches an embedded Flash movie, a little
window pops up inside that embedded movie
asking me to click Allow or Deny.
But NIETHER is clickable, the browser is locked,
nothing can be clicked and ALL other tabs are locked
and cannot be clicked either.
I have to hit CTRL+ALT+DELTE to kills the
browser in Task Manager. .A HUGE annoyance,
that comes unexpectedly because you don't know
when an embedded movie will be on the next page
you click.
How do I stop that Allow/Deny message popping up??
-DrewCCWTechUtah wrote:
I'm running the latest ATI driver
The latest driver from Microsoft Update, or from the AMD download site? See http://forums.adobe.com/thread/945765
Green screen is usually an indication for some incompatibility with the graphics driver, although turning Hardware Acceleration off should prevent that from happening. -
I haven't been able to use my Safari Browser for months. Each time I launch it, it crashes.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
I've created a simulation in Flash 8. The simulation is
working fine in IE7 but when I'm launching the sim in Safari
browser the sim is not working as it should. I'm getting some
issues like:
Some SWFs are not getting
loaded.
Some Functions are not working
I've also checked the Flash player version in both IE and
Safari, they both are version 9 and updated.
Has anyone faced this issue ever. I need some expert
comments.
Thanks
GovindaBack up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
IPhone contact pictures disappear once i use safari browser
Can anyone help with this problem... I assign pictures to my contacts. When I use my iPhone safari browser, or use any internet apps, the contact pictures disappear. What is going on? Thanks.
ckent007,
What version of the iPhone software are you using?
Are you saving the contact pictures (by tapping done in the edit contact screen) before you go to the home screen and use another application?
Hope this helps,
Jennifer B. -
On the development version of a site, I have created a flash
movie that uses an XML file that refers to the filenames of images
and their respective captions that are then loaded into the flash
movie.
The images are loaded 2 at a time, into movie containers
within the movie, and then the movies containing the images cycle
through the images one at a time, one movie container fading out
revealing the next image below it, etc. etc.
Basically, I have used this on the site for many photo
galleries. Each one uses the same flash file (in its own folder on
the server, with its respective "images" subdirectory) coupled with
an XML file (all in the same folder on the server) that tells the
flash file where the images are, and in what order, and their
related captions.
There are 9 photo galleries, therefore 9 folders on the
server, each with their own flash and XML and JPEG image files. For
3 specific galleries, the flash file does not load images on some
computers using IE. On the same computers, all other galleries work
fine.
Can anyone even guess what could be causing this??
Many thanks in advance,
ArmoMaybe you can try You Tube Api for flash
http://code.google.com/apis/youtube/flash_api_reference.html
Maybe you are looking for
-
Jabber 9.2.5 and above forced Certificates
Hello all, As some of you may already know as of Jabber version 9.2.5 the client force’s Certificates. If there is not a Certificate that is signed by a trusted CA, then the self-signed Cert is used. There is no way that I have found to get around th
-
I am a new iPhone 4s owner. I have a tone in iTunes that I downloaded from the web as a m4r file. Why won't it sync to my iPhone so I can set it as a ringtone? Lois
-
Upgrade graphics card(s)?
Would there be a significant advantage to getting a more powerful graphics card? The current configuration is two NVIDIA GeForce 7300 GT cards driving three monitors on a Mac Pro dual-core Intel desktop, 16GB RAM, running Photoshop CS4. I don't do
-
Hi all, I designed a RFC_adapter_sender to SOAP_adapter_receiver scenario. During runtime, I got com.sap.security.core.server.ws.service.WSSecurityException. I don't know the reason of this. The sender and the receiver is in two differen channels in
-
Convert cmyk to rgb in acrobat 7
Good morning, I have a question about converting color spaces using Acrobat 7 Professional and Pitstop Pro. I have some CMYK PDFs used for magazine printing that I need to convert to a 144 DPI RGB version for a digital edition. I know most folks are