Unlock iphone3g for using in other country

i live in france. i bought iphone3g until 08082008. i want to unlock my iphone3g for using in the other country. how can i do it? thank you very much.

I used operator ORANGE at france. I used 3 iphone (3G, 3GS and 4). 
For 3GS and 4, I success to unlock. I call to operator orange and then they sent email back in 24 hours: ok ur iphone ... IMEI ... Unlock already but if u used this phone in 3 month u will paid 76 €, but over 3 month it's free. Bec 2 phone I've contract with ORANGE operator (like AT&T in USA). http://touslesmobiles.orange.fr
But iphone 3G, I bought iphone3g until 08082008 by no contract (buy only telephone and I used old no. (operator orange)). 
Question: How can I mail to apple company (for show my slip payment) for tell my phone IMEI?

Similar Messages

  • How can i cancel an at&t contract on iphone 5 for use in other country

    how can i cancel an at&t contract on iphone 5 for use in other country

    Contact AT&T and ask about paying the early termination fee.  You'll also need them to unlock it.
    In any case, you need to contact AT&T as they have the final say.

  • If I purchase an iPhone 4S in Indonesia can I unlock it for use in Canada and/or the US. Can I change out the sim card by country?

    If I purchase an iPhone 4S in Indonesia can I unlock it for use in Canada and the US as well? Can I swap out sim cars in each country as well?

    iPhone_Warrior wrote:
    Shipping the phone back to Indonesia will be at your expense.
    You can't ship back to Apple or any of the authorized carriers, as they do not accept international shipments for iPhone warranty or service work, you must physically bring the phone back.

  • HT1222 I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model.  I would like to unlock it and use in my country.  How can I get it unlocked so the I can use my local micro sim card?  What info about it do you need to assist me in unlocking

    I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model.  I would like to unlock it and use in my country.  How can I get it unlocked so the I can use my local micro sim card?  What info about it do you need to assist me in unlocking it?

    Sounds like you bought an AT&T no contract phone. You will need to contact AT&T for unlocking but they are only doing so for current and previous account holders. If you have never had service with them they will not unlock your phone.

  • I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model.  I would like to unlock it and use in my country.  How can I get it unlocked so the I can use my local micro sim card?  What info about it do you need to assist me in unlocking it?

    I visited the USA and bought an Apple iPhone 4 5.1.1, the latest model.  I would like to unlock it and use in my country.  How can I get it unlocked so the I can use my local micro sim card?  What info about it do you need to assist me in unlocking it?

    Contact the original cellular provider, as they are the only ones that can provide unlocking.

  • How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    Phone A = phone with information you want duplicated
    Phone B = phone that you want to copy from A
    Backup Phone A.
    Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
    Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
    When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
    After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

  • Layer Styles Not Saving for Use on Other Computers

    I've been trying over and over for the last 6 hours to get the layer styles I save in my custom pallet to work on other computers. I mean, I have a bunch of pallets from other sources and somehow they achieved a way of being able to save theirs, now why can't I do it on mine?
    So, here's the story of what I've done. I have a Text layer, I've added a list of FX to it via the Layer Styles menu. Now I save the document. I open up a new document and copy/paste the FX onto a new Text layer in another document window. It works great.
    Then, I save the layer styles for use later, but no. When I do everything exactly the same way, my Layer Style that I saved has lost all it coordinates of shadows and stroke widths, bevels, you name it, it's screwed up. Now I've tried this so far on CS4 and CS5, 3 different computers. All 3 computers have different settings for how Photoshop is set up, so I know it's NOT my settings alone. Though, it keeps the colors and custom gradients how they are, everything is bonkers.
    I'm ready to stop trusting in Photoshop to be there for me when I need it...or punch a hole in the wall. Whichever comes first.
    I need help for this as soon as possible, for I have an assignment I need this for.
    Running: Windows 7 64
    Adobe Photoshop CS4 & CS5.

    SplendidAngst wrote:
    <snip>
    Then, I save the layer styles for use later, but no. When I do everything exactly the same way, my Layer Style that I saved has lost all it coordinates of shadows and stroke widths, bevels, you name it, it's screwed up.<snip>
    Adobe Photoshop CS4 & CS5.
    Seems to me you left out the most critical piece of information, that is, HOW did you save the layer style for later use ?
    You might read this tutorial to see if you did it correctly.
    Paulo

  • How to get iphone unlocked for using in other countries

    Can someone please advice how I can unlock iphone 3gs when I can aboard and use another sim

    Contact the carrier it is locked to, only they can unlock it.

  • How to unlock my iphone for use with other compani

    how can i unlock my phone

    As always, contact the original cellular provider to determine their unlocking policy, and if you qualify.

  • Purchasing an iPhone in the States for use in Foriegn country

    Am moving to Israel and looking to by an iphone before I leave the States.  Will I be able to use the iphone in Israel?

    This question comes up all the time, and the answer is yes if you purchase an officially unlocked iPhone, directly from Apple. There is no where else, in the US, to purchase officially unlocked iPhones.
    You need to be aware of one big downside to doing this: You will have absolutely NO warranty & support for a US iPhone in Israel...NONE. If you have any issues, you will have to physically return the phone to the US for all warranty & support issues...you can't mail it back.

  • How can I convert .mov files for use with other apps?

    When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
    Thanks - J
    RS720G   Windows XP  

    Kodak Digital Camera QuickTime MOV Problems
    After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
    I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
    I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
    The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
    The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
    The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
    The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
    The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
    The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
    It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
    After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
    RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
    The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
    Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
    Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
    The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
    Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
    After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
    It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
    After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
    Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
    So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
    From here, however, there are still a few snags to untangle.
    The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
    I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
    Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
    That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
    Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
    The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
    So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

  • I have IPad2 from verizon, but I want to use in other country, how can I change a chip? I knew that from AT

    I bought Ipad 2 wi-fi 3G, from Verizon, Is posible to change a Chip´??

    The Verizon 3g iPad uses a mobile technology called CDMA. CDMA does not use SIM cards or anything similar, it basically works off a hardware identifier for the device that's built-in to the packet radio and registered with your provider. CDMA is pretty much used by Verizon in North America and several countries in Asia.
    Most of the world uses the GSM technology that's the basis of the AT&T 3g iPad. That's the one you want if you plan to use 3g wireless service outside of the country.
    The WiFi feature on both systems works identically. The only stipulation is that you be near a WiFi access point.

  • CC use in other country.

    Dear sir:
    I join and subscribe CC one year ago in Japan.
    In service agreement It says::
    1.10 “Territory” means the region where Customer is permitted to install and use the Software. For consumer Customers, Territory shall mean worldwide.
    but
    4.9 Territory. Customer shall only use the Software and access the Adobe Online Services in the Territory and in a manner consistent with the activation policy described at http://www.adobe.com/go/activation. Notwithstanding anything stated to the contrary, for Customer who purchases a license with Permitted Number greater than 1 (or more than 1 copy of the Software), Customer must install or deploy the Software in the country where Customer purchases the license unless otherwise permitted in an Adobe volume licensing program.
    I subscribe 2 licenses, one for me, another for my wife.
    I'm confused. Now I work in China where you had not offer CC service. Can I still using it?
    Best,
    Freeman Wu

    You are fine as long as the country of your Adobe ID and the country of your credit card match; and the country is one that we support for a Creative Cloud subscription. The fact that you are in a different country now is ok.

  • Buying official USA unlocked iPhone for use in the UK

    Hey there - about the head over to the USA for a holiday and want to pick up an official Apple unlocked iPhone 4.
    The specs say GSM - does this mean it doesn't have 3G at all? Will it work with a UK micro-sim on 3G or just EDGE?
    Cheers!

    "3G" is absolutely not standard; in fact, "3G" as a term is essentially meaningless; it's mostly a marketing term and does not convey anything definite in terms of technology. "GSM" is a more informative term, being the connection technology used by many cell carriers, but even there differences can be found. In the US, AT&T and T-Mobile both use GSM but use different frequencies; the US iPhone doesn't support the frequencies T-Mobile uses except for EDGE (an older, slower technology).
    Important note: the warranty on the iPhone is not world-wide. So you if you buy a US iPhone and it needs to be serviced, you will probably have to ship it to your US relative to send/take to Apple to get it serviced. Just so you know.
    Regards.

  • Dreamweaver as code generator for use in other applications?

    Hello and thank you in advance for your time and your help!
    I realize and apologize for this lengthy post but I had to explain my issue thoroughly...
    I've just begun teaching myself to use Dreamweaver CS3 (on an iMac running OS X 10.5.8 - Leopard) with the  "Dreamweaver CS3 Missing Manual". I don't know HTML or CSS but am very  willing to learn as much as I can. In the near future, I hope to create a  new website for my domain in Dreamweaver. However, I have an urgent and  immediate need and would like to know whether Dreamweaver can serve a specific purpose...
    My question is whether I will still be able to accomplish the following (even if it is by different means) once I convert to Dreamweaver from FrontPage AND whether or not I should abolish all of the current files at my web server and remove FrontPage extensions before I invest any time into making Dreamweaver my new tool for website development and maintenance.
    I have a domain hosted by GoDaddy and a rather old website that I created using FrontPage 2002 (on a Windows XP desktop). For over 5 years now, I've used FrontPage so that I can work WYSIWYG to generate HTML code that I use in my eBay auction listings. Recently, however, the "network folder" for my web server (on the Windows XP desktop) stopped accepting my password and I cannot find a fix for it. It's my opportunity to finally break from FrontPage but I'm hoping that, before I do, someone can tell me whether or not Dreamweaver can serve my interim and long-term purposes.
    I've been uploading image files using the "network folder" in Windows XP that I set up with FrontPage over 5 years ago. I "drag and drop" or "cut and paste" image files from my computer to my web server in Windows Explorer via the "network folder". Once the images are on the web server, I open FrontPage and ensure that the images show up in my web server files. I then open an existing .html document that I have saved on my hard drive, replace text and images within the file, save the file under a different file name, and then switch to code view where I copy the code directly from FrontPage into my eBay listing. This works perfectly well and has for over 5 years. I do not publish these .html files to the web, nor do I upload the .html files to my web server. They exist only on my hard drive and simply to provide the underlying HTML code for the eBay listings and nothing more. This method allows the images in my eBay auctions to be automatically sourced to their location on my web server without requiring me to do anything more than insert the image(s) from my web server into the .html document/file.
    I think I'm discovering that Dreamweaver works specifically with websites and I'm wondering whether I can use it more generically in this way. If I'm learning correctly, Dreamweaver is quite particular about web server files having an exact match to a root folder on my hard drive. I've defined my site within Dreamweaver and I've since downloaded all existing files from my web server to my hard drive within a folder that is designated as the root folder. However, when I now open an existing .html document (one originally created in FrontPage and stored on my hard drive only) and replace an image (by cutting the existing image and dragging the other from the "remote view" of the "files" pane) with one that exists both on my web server and in my root folder, Dreamweaver makes the source/reference path point to the image file on my hard drive and, as you know, that won't do if I transfer that code to my eBay listing. So I've uploaded the actual .html file to the web server within Dreamweaver (something that I never had to do with FrontPage) and now I can change the HTML code manually (or the source in the "properties" panel for the image) for the image source to include "http://mydomain/..." (it doesn't include that automatically as FrontPage did). That now seems to make the code work but I have to store my .html files on the server and I have to make that manual change.
    My question is whether I will still be able to do accomplish  the following (even if it is by different means) once I convert to  Dreamweaver from FrontPage AND whether or not I should abolish all of  the current files at my web server and remove FrontPage extensions  before I invest any time into making Dreamweaver my new tool for website  development and maintenance.
    Thank you very sincerely for taking the time to read this and for your response and good advice!

    Get Turbo Lister (a free page editing and listing tool from eBay).
    http://pages.ebay.com/turbo_lister/
    eBay uses some seriously flawed markup on their auction pages.  In fact, they don't even ALLOW you to use good code. You're better off using their proprietary tools for this.   IMO, DW is not the right tool for creating eBay pages.
    When you're ready to build a serious web site, come back to Dreamweaver.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

Maybe you are looking for