Unsing comma sep URL Syntax mq://host:port/option1=va,mq://host:port/option

in the [openmq documentation|https://jmsjca.dev.java.net/source/browse/*checkout*/jmsjca/jmsjca/unifiedjms/src/userdoc/sun-jms-adapter-readme.html] it is mentioned that u can use such comma seperated configurations for failover. now my question is what is the result if i am using such syntax to configure
To support one or more SJSMQ message server addresses, add a comma and another URL,
e.g. mq://host:port/serviceName?option1=value1&option2=value2, mq://host:port/serviceName?option1=value1&option2=value2 1) consumers
2) producers with this url?
lets say this setup is given:
datacenter 1   ---------------100 km ---------------- datacenter 2
broker1                                                       broker 2
appserver domain 1                             appserver domain 2 (clients configured with both brokers)
producer and consumer for queue1             producer and consumer for queue1 on broker?1) how do the clients decide to which broker connect first?
2) what happens if tcp connection (WAN) breaks between datacenter
3) what happens if it gets up again?
any comments appreciated.
can anyone point me to a documentation that is a bit more comprehensive on this feature?
regards chris
Edited by: cbrennsteiner on Jul 2, 2008 4:09 PM

Please read the section in the documentation on client reconnection. That should cover how clients connect and reconnect. If you have any questions after that please let us know:
http://docs.sun.com/app/docs/doc/819-7757/6n9mar6ff?l=en&a=view#aeqdx

Similar Messages

RoboServer URL syntax..? Got it.

Proper format is:
http://<server>:8080/robohelp/server?area=<area>&prj=<project name>
I have searched, but for some reason, i cannot get the URL syntax to properly resolve in the browser when adding another area and project.
http://servername:8080/robohelp/server ....this one resolves to the default properly..general area
i have created a new area called xxxxx
i have tried
http://<servername>:port/robohelp/server/<area>/<projectname>
and it does not work. I have seen the question mark syntax added but that did not work either.
JC

user512746 (you can have a name display by going to "Your Control Panel") -
Are you by chance using a manually created report region, using htmldb_item (or apex_item)?
If so, then your problem may be what is discussed in the thread at Column value substitution in tabular form element attributes
and
Column value substitution in tabular form element attributes
(specifically near the end of each thread).
If you're using a wizard generated report, then the problem may be different, I'm not sure.
Hope this helps.
Bill Ferguson

Interactive report URL syntax

Hi
I'm using Apex 3.1.2, and am fairly new to using Interactive reports. I've found the URL syntax to apply a filter on an IR, and was just wondering if it is possible to apply a sort, or even open a saved report from a URL link? I am well aware that I can work around it (using different pages with a sort pre-applied etc) but was hoping that I could do everything on one page.
Thanks!
-Marc

Hi Marc,
I just read over the document and it doesn't appear that we can do it via the URL, however you may be able to do this using JS.
Try this (I did this as a test on the emp table)
//Send filter request
var get = new htmldb_Get(null,$v('pFlowId'),'APXWGT',$v('pFlowStepId'));
get.addParam('f01','EMPNO');
get.addParam('f01','=');
get.addParam('f01','7369');
get.addParam('f01','');
get.addParam('f01','minutes');
get.addParam('p_widget_action','FILTER');
get.addParam('p_widget_action_mod','ADD');
get.addParam('p_widget_mod','ACTION');
get.addParam('p_widget_name','worksheet');
get.addParam('x01',$v('apexir_WORKSHEET_ID'));
get.addParam('x02',$v('apexir_REPORT_ID'));
get.addParam('x03','EMPNO');
var gReturn = get.get();
//Refresh report request
var get = new htmldb_Get(null,$v('pFlowId'),'APXWGT',$v('pFlowStepId'));
get.addParam('p_widget_mod','PULL');
get.addParam('p_widget_name','worksheet');
get.addParam('x01',$v('apexir_WORKSHEET_ID'));
get.addParam('x02',$v('apexir_REPORT_ID'));
get.addParam('x03','EMPNO');
var gReturn = get.get();
//Refresh HTML report
$s('apexir_WORKSHEET',gReturn);
I'll try to put a post on my blog about the full solution to this shortly ([http://apex-smb.blogspot.com/])
Martin

How do setup the URL alias without the port number 7001?

Hi all,
I am using Weblogic 8.1 and have the following url http://solutions.company.com:7001/application.
I would like to simplify this URL by removing the port number to http://solutions.company.com/application.
(ie., configuring the system such that it automatically looks at 7001 without
the user typing it ). One of the ideas that i got was to use apache web server
and redirect to the weblogic URL. But i would like to know if this can be done
within weblogic?
cheers
-Jams

Did you ever get an answer to this?? We are attempting to do the same thing.
Tammy
"JD" <[email protected]> wrote:
>
Hello All,
I am looking for solution to the same problem, we would like to map
http://www.company.com
TO
http://www.company.com:7001/application/first.jsp
All help appreciated.
Thanks
Jay
"Jams" <[email protected]> wrote:
Hi all,
I am using Weblogic 8.1 and have the following url http://solutions.company.com:7001/application.
I would like to simplify this URL by removing the port number to http://solutions.company.com/application.
(ie., configuring the system such that it automatically looks at 7001
without
the user typing it ). One of the ideas that i got was to use apacheweb
server
and redirect to the weblogic URL. But i would like to know if this can
be done
within weblogic?
cheers
-Jams

WebEx Named Host and Port Options

Hello,
Whats he diffrence between WEBEX NAMED HOST and WEBEX PORT OPTION. And do they requrie any hardware to function with?
a documetation with explanations will help more.
Regards,
Peter.

Named Host is where you specify which users can host a meeting. Those people are the only ones who can schedule/create meetings but they can transfer the host role to another person after the meeting has started. Ports on the other hand only limit the total meeting participants across all hosts (the host also consumes a port). You can create as many hosts as you need but total attendance at any one time cannot exceed your ports. There are also per-minute options and active host options where only an unnamed percentage of the organization is assumed to be a host and you true-up if real usage exceeds that percentage.
It's probably best to speak with a Cisco or WebEx AM over the options. Different usage styles lend themselves to different licensing options. Here's a data sheet though:
http://www.cisco.com/en/US/prod/collateral/ps10352/ps10362/ps10409/cisco_webex_meeting_center_on_the_gpl_and_wpl.pdf
Please remember to rate helpful responses and identify helpful or correct answers.

Comma Sep. checkboxes

Insert form with the comma sep. checkboxes works great...
Update form with the comma sep. checkboxes does not display or retain inserted values. please advise on know how to code the boxes to display previously checked, as no checkboxes are available until rendered in a browser, and then take the update .
thanks

I'm running into another problem. Your solution for displaying the locations with spaces works great when querying a single record.
However, when I use in a repeat region, all records show the location of the first record. This problem is only present in a repeat region.
For the repeat region, I choose a recordset called feeds to repeat. Repeating elements inside are displayed as .
Now, $locations is in that recordet but $locations_with_spaces is not.
Is there a way to get $locations_with_spaces to repeat properly?
Thanks
-Kevin

Url syntax to call stored procedure

I want to call a stored procedure (STOERFALL_PROC). owner is ELVE_TEST
v_ba_id and v_sf_id are paremeters for the procedure
#SF_BA_ID# and #BEARBEITEN# are column values of my reports region for the parameters
in the url field of the column link attributes of my report region i set this url syntax to call the proc
#ELVE_TEST#.STOERFALL_PROC?v_ba_id=#SF_BA_ID#,v_sf_id=#BEARBEITEN#
but it doesn´t works and I don´t know why.
Can me help someone?

user512746 (you can have a name display by going to "Your Control Panel") -
Are you by chance using a manually created report region, using htmldb_item (or apex_item)?
If so, then your problem may be what is discussed in the thread at Column value substitution in tabular form element attributes
and
Column value substitution in tabular form element attributes
(specifically near the end of each thread).
If you're using a wizard generated report, then the problem may be different, I'm not sure.
Hope this helps.
Bill Ferguson

Admin api - correct url syntax to getUsers for an event instance.

I'm trying to use the admin api to call the function getUsers() and I'm not sure of the correct URL syntax. I want to return the number of users currently connected to an event instance. Could someone provide an example of what the URL connection string would look like?
I tried the following syntax
http://localhost:1111/admin/getUsers?auser=USER&apswd=PASSWORD&appInst=livepkgr/_definst_/ myEvent
but it returns this error message.
<?xml version="1.0" encoding="UTF-8"?>
-<result>
<level>error</level>
<code>NetConnection.Admin.CommandFailed</code>
<timestamp>10/26/2012 8:06:23 AM</timestamp>
</result>
>>>>>>>>>>>>>>>>>>>>>>>>
I can successfully use the ping command: http://localhost:1111/admin/ping?auser=USER&apswd=PASSWORD
<?xml version="1.0" encoding="UTF-8"?>
-<result>
<level>status</level>
<code>NetConnection.Call.Success</code>
<timestamp>10/26/2012 8:12:51 AM</timestamp>
</result>
In my FMS.ini file I do have USERS.HTTPCOMMAND_ALLOW = true
In my USERS.xml file I have
<HTTPCommands>
 <Enable>${USERS.HTTPCOMMAND_ALLOW}</Enable>
 <Allow>ping,getUsers,getUserStats,getServerStats</Allow>
 <Deny></Deny>
 <Order>Deny,Allow</Order>
</HTTPCommands>
Thanks!

I found the problem. I wasn't putting quotes around the application/instance name value.
http://localhost:1111/admin/getUsers?auser=USER&apswd=PASSWORD&appInst ="livepkgr/_definst_""
Did the trick. Question though will this identify the number of client connections over http in addition to rtmp?
Thanks Again!

URL Syntax -Replacement of DocumentDownload/Doc ID?

Hi Gurus,
Earlier i was using SWF loader component to call another SWF file in the parent SWF using the syntax "documentDownload?iDocID=XXXXXX&sKind=Flash"
Now i have been asked to use the approach of "SAP NW BW connection" in EP i would require the URL (BEX run time)
what should be the URL syntax used in my SWF loader?
or do i need to use some other component ...
Thanks in advance..
Sam

I have tried using the URL modifying the url of the parent dashboard but seems it is not working in that manner..
Has any one explored this kind of dashboards..(child dashboard has been called in the parent one)..
Please share ur thoughts..
Sam

I have no window into which to type a url. Also there are no pull-down tabs.. options? tools? etc. Do I need to remove Firefor and RE-install?

Firefox worked fine yesterday. Now I have no window into which to type a url. Also there are no pull-down tabs.. options? tools? etc.
== just now when I started Firefox

'''''"...no pull-down tabs.. options? tools? etc."''''': see Menu Bar below.
'''''"...no window into which to type a url"''''': that's the URL/location bar located on the Navigation Toolbar; see below.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.17; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.

Comm Express URL problem

Posting here again for lack of Communications Express Forum.
I installed Messaging Server JES 2004Q2 in server A.
I installed Communications Express JES 2004Q2 in server B.
I access http://serverB/uwc and can login ok, but in my browser I see
that the URL changed to http://serverA/es/mail.html?lang=es&laurel=on&cal=1
so all further links point to Server A instead of server B. This seems to be ok when I navigate in the mail TAB but if I try to access the Calendar TAB or address book TAB I get a page not found because the url is not pointing to Server B where the UWC application is.
I have triple checked uwcauth.properties, uwcconfig.properties and
configutil and everything seems ok.
If I change the URL to server B manually in the browser I do get access to the application.
suggestions anyone?

BTW, here is the config:
(Identity Server is where the messaging server is, that is Server A
in port 82):
CONFIGUTIL:
local.webmail.sso.amnamingurl = http://serverA:82/amserver/namingservice
local.webmail.sso.cookiedomain = .domain.mx
local.webmail.sso.enable = 1
local.webmail.sso.id = uwc
local.webmail.sso.ims.verifyurl = http://ServerA/VerifySSO?
local.webmail.sso.prefix = usonsso
local.webmail.sso.singlesignoff = 1
local.webmail.sso.uwc.verifyurl = http://ServerB/uwc/VerifySSO?
local.webmail.sso.uwccontexturi = uwc
local.webmail.sso.uwcenable = 1
local.webmail.sso.uwchome = http://www.home.page
local.webmail.sso.uwclogouturl = http://ServerB/uwc/base/UWCmain?op=logout
local.webmail.sso.uwcport = 80
UWCAUTH.PROPERTIES:
virtualdomain.mode = y
uwcauth.appprefix = usonsso
uwcauth.appid = uwc
messagingsso.appid = ims
uwcauth.cookiedomain = .domain.mx
uwcauth.messagingsso.enable = true
uwcauth.messagingsso.cookiepath = /
messagingsso.ims.url = http://ServerA/VerifySSO?
messagingsso.uwc.url = http://ServerB/uwc/VerifySSO?
uwcauth.identity.login.url=http://ServerA:82/amserver/UI/Login
uwcauth.identitysso.cookiepath = /
uwcauth.http.port=80
uwcauth.identity.cookiename=iPlanetDirectoryPro
UWCCONFIG.PROPERTIES:
mail.deployed = true
webmail.host = ServerA
webmail.port = 80
calendar.deployed = true
calendar.wcap.host = ServerA
calendar.wcap.port = 81
calendar.wcap.adminid = [email protected]

Login problem with E-Recruiting URL, where check host name?

Hi,
I've set up a standard Recruiter user and assigned him the standard Recruiter security profile. When I run RCF_GENERATE_URLS, I get this URL:
http://iwdfvm2160.wdf.sap.corp:51080/sap/bc/bsp/sap/hrrcf_start_int?sap-client=200&sap-language=EN&rcfSpId=0003
But I get an "internal error" when I login with my User. Our server's host name is iwdfvm2160.gcsap.com, but the program isn't resolving this. This is probably the cause of the error, but how can I get it to pick up our host name?
We are on E-Recruiting version 6, and it's running on the same box as HCM.
Thanks, Vlad

Hello Vlad,
usually the links generated from the report are correct. Only very rare problem might be in the network structure of your company that the internal dns servers can't resolve the server name or the sap servers are in a not reachable network segmant as you never worked with http access to the servers for other applicatiohns.
But if you log on the first time with your user and have not been working with the application yet, the more probable reason for this error is the missing candidate for e-recruiting. Without a candidate you won't be able to work with the application.
Check transaction SLG1. There should be an error "No candidate for User <your username>" or sth. similar.
If so run report RCF_CREATE_USER to get a candidate. Then you should be able to log on.
If you already have a candidate and cannot login check SLG1 and SM21 for error messages. If there are any but you don't feel able to solve the logged problem. Just post the message here. I think someone will be able to help.
Best Regards
Roman Weise

ACE class-map match url syntax

Can someone help me with the string that would match a url with no path specified? For instance; user types "https://outlook.domain.net" into their browser and I want the ACE to redirect that request to https://outlook.domain.net/owa".
2 match http url oulook\.domain\.net\

Adam and Shday,
I'll give you a hand on this =)
Adam we can solve your problem only if you're doing SSL offloading on the ACE as the layer 5 information that needs to be checked is being sent encrypted.
In case SSL termination is configured then the configuration would be like this:
rserver redirect OWA
webhost-redirection https://%h/owa 301
inservice
serverfarm redirect OWA
rserver OWA
    inservice
class-map type http loadbalance match-any OWA
2 match http header Host header-value "outlook.domain.net"
policy-map type loadbalance first-match OWA
class OWA
serverfarm OWA
class class-default
serverfarm Backend
Shday yours is pretty much the same but you need to decide if class-default needs
to be in place:
rserver redirect Domain
webhost-redirection http://%h/any_path 301
inservice
serverfarm redirect Domain
   rserver Domain
     inservice
class-map type http loadbalance match-any Any
2 match http url /.*
class-map type http loadbalance match-any Domain
2 match http header Host header-value "domain.com"
policy-map type loadbalance first-match Domain
class Any
serverfarm Backend
class Domain
serverfarm Domain
HTH
Pablo

URL syntax for a CSS

We have a 11503 acting as a reverse proxy and I am having some issues matching a url. The url we want to match is "/bc/gui/sap/its/zhrits_". I have tried various combinations but cannot get a url ending in _ to work. Is _ a valid ending character on the CSS? All my other urls work except for the 2 which end in _.
content zhrits
balance url
vip address x.x.x.x
add service hr3hrt00
protocol tcp
port 80
url "/bc/gui/sap/its/zhrits_/*"
active

I am using 8.20.
Here is what is happening with this testing. What I did was suspend all rules accept for this rule. When I tried to connect, I got connection failed in browser even though the rule showed active. Now if I turn on another rule(this could be any rule), I get the error message "Connection Interrupted". So it looks like the rule isn't even listening for the incoming request. When I have another rule active, it tries to match to that which causes the "Connection Interrupted". I also do not have the catch all rule (/*) in place yet since I wanted to test the url matching first.

Datasource URL Syntax

I'm trying to use a DB2 datasource that I set up on my WebSphere Application server:
javax.sql.DataSource myDS = (javax.sql.DataSource) initialContext.lookup("java:TB1A/jdbc/TouDataSource");but suspect that the syntax in URL is incorrect bc I get this error
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
Could someone please breakdown the correct syntax for me?
"java:Database?/jdbc/TheNameOfMyDataSource" ?

javax.naming.NoInitialContextException: Need to
specify class name in environment or system property,
or as an applet parameter, or in an application
resource file: java.naming.factory.initialThe exception indicates that you need to initialize the INITIAL_CONTEXT_FACTORY.
Sample code:
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.ibm.websphere.naming.WsnInitialContextFactory");
env.put(Context.PROVIDER_URL, "corbaloc:iiop:myhost.mycompany.com:2809");
Context initialContext = new InitialContext(env);The URL seems incorrect anyway. Refer to http://publib.boulder.ibm.com/infocenter/wasinfo/v5r1//index.jsp?topic=/com.ibm.websphere.base.doc/info/aes/ae/rnam_example_prop3.html

Unsing comma sep URL Syntax mq://host:port/option1=va,mq://host:port/option

Similar Messages

Maybe you are looking for