Up grade to Windows 7 (32 bit)

I upgraded my touchsmart from vista to windows 7. I have managed to get most features working (ie webcam, fingerprint and touch software. What I can't restore are the three buttons on the right lower part of the screen (ie screen orientation, media and tools). If anyone can help me I would be very grateful.
Many thanks.

The Touchsmart desktops have no such buttons. You may want to head down the hall to the Notebook sections on this, http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks/bd-p/Tablet

Similar Messages

Sir, i have upgraded my pc note book with window 7, 32 bits after the up grade pc has is problematic

I have recently upgraded Pc with window 7, 32 bit. It is causing lots of problems after the upgrade. i am finding difficulty
in typing this message also as the cursor is moving eratically. i am not able to retrive the stored documents from the removable hard disk. i need your immediate support. I shall feel much obliged for your immedite action.
Krishnan.
This question was solved.
View Solution.

Hi,
Please call office near you. Is your machine still under warranty ? Changing the OS may void the warranty:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
http://welcome.hp.com/country/w1/en/support.html
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I install iTunes on Windows 7 64-bit, it opens, it crashes

The subject says it all, pretty much.
- I install the latest iTunes (downloaded 01/31/2014)
- I open it, then go to iTunes store, and it hangs itself after login
OR
- I open it, then close it, then hold SHIFT and double-click, as I want the library on a separate drive. I can select the drive, but in the meantime, the program hangs itself. In this case, onlt for about 30 minutes. Then it asks if I want to see the tutorials. I try to close it. It's been running in this state for over 8 hours now.
I've tried uninstalling everything related to itunes, even removing all files from the registry. Each time I install, I get the same result. I have not prior install history left on this PC, as no install had been ever authorized when I had it on this machine for a few days back 3-4 months ago. The machine I used before has been repurposed, and doesn't have the software anymore... But it's also Windows 7 64-bit
Any help will be greatly appreciated.

When I run the iTunes64setup.exe it says: "The thingy is not a valid win32 application."
That generally indicates that the installer has been getting damaged on the download.
What web browser have you been using for downloading the iTunes64Setup.exe? Does it make any difference if you use Firefox instead of IE for the download (or vice versa)?

How can I sync my iPod Classic with iTunes 11.1.4 and Windows 7 64-bit?

After assistance from ‘b Noir’ (and losing--then finally regaining--my DVD/CD reader in the process), I finally installed the iTunes Version 11.1.4 update on my Windows 7 64-bit PC. So I am again able to import music from CDs, play music on my PC with iTunes, and burn CDs as I could do with previous iTunes versions. Then, however, I purchased some new music and tried to sync iTunes with my iPod Classic for the first time since the update to 11.1.4. So far, I have been spectacularly unsuccessful. Can anyone help me?
With previous iTunes versions, sync was automatic when I connected iPod to a USB port. Now when I connect iPod Classic to PC's USB port (I've tried two different ports), iPod’s screen says “Connecting” but iTunes doesn’t open. And while iPod is connected to the USB port, I can't open iTunes by right-clicking its icon and selecting “Open.” (ITunes, however, always opens OK if iPod is NOT connected). With the iPod connected to a PC's USB port, I opened Windows 7 “Devices and Printers.” Devices shown included both (a) the “Apple iPod USB Device” and (b) “Apple Mobile Device USB Driver.” I right-clicked each of these device icons in turn and selected “troubleshoot.” Both times, the report was “Troubleshooting couldn’t identify the problem.”
I am also unable to properly “eject” the iPod. I tried ejecting (a) from the Windows taskbar's Notification Area, (b) from Windows “Devices and Printers” and (c) by right clicking the iTunes icon and selecting “Eject.” Nothing worked, so I reluctantly pulled the cable out of the iPod without ejecting. That causes a yellow triangle with an exclamation point to appear in “Devices and Printers” for my PC—which disappears after shutting down and rebooting the PC.
If I start iTunes and THEN connect the iPod Classic to the USB port, iTunes does nothing and almost instantly freezes (shows as “not responding” in Windows Task Manager and I have to close it via Task Manager).
Suggestions, please, on what I need to do? My iPod Classic continues to work just fine, but I can't put any of my newly purchased music on it and I guess it will become an expensive paperweight if the battery happens to run down. If nothing else, is there an old version of iTunes I can download somewhere that likely will work with the iPod Classic and my PC setup? Thanks so much!

Hi turingtest2,
Thanks so much for your response--yes, I've seen the TS1363 document.
I was able to open iTunes, start the iPod Diagnostic Device Connectivity Test, and connect the iPod when prompted to do so. The only problem reported by the diagnostic program was "No iPod, iPhone or iPad found." So it does seem as if the TS1363 document should apply. But I have tried connecting the iPod after executing each of Steps 1, 2, 3, 5, 6, and 9 shown there and nothing has worked so far. Details follow:
--Went through the iPod Classic troubleshooting assistant--except I did not "reset" the iPod (because having all my "old" music available on the iPod has value to me).
--Restarted iPod Service.
--Restarted Apple Mobile Device Service.
--Verified that the Apple Mobile Device USB Driver is installed. There is no down arrow or question mark or other indication of problem with it.
--Tried two different USB ports (I assume that is what is meant by "change your iPod's drive letter"?).
--Temporarily disabled Norton Antivirus.
For some reason, there are 368 files and 60 folders in the Temp folder under my user name, and it looks like at least some are "read-only." Windows wouldn't let me delete or move the folder, even after I turned off Norton AntiVirus and closed the programs in the "Notification Area" that I could figure out how to close.
I'm very reluctant to get into messing with Config files or registry keys. And I have already tried uninstalling/reinstalling iTunes 11.4.1 so many times. I'm not sure what to do but am considering uninstalling all of the Apple products (again) and try installing an older version of iTunes. Or maybe I should try to install iTunes 11.4.1 on our Windows 8 laptop and see if the iPod will connect to that (although I really need to be able to sync to my desktop PC). Probably won't have time to do either for a few days--too many other things to do. But please let me know if there's something more that's relatively simple and low-risk I could try. Thanks again!

After rebooting my Windows Vista 64 bit system, could not access iTunes; after uninstalling I tried reinstalling, but it has been running for more than 24 hrs. Should I cancel installation?

I had been updating my Windows Vista 64 bit system and as a result of a problem, had to reboot my system. Afterwards, I was no longer able to access iTunes. I got a message stating that there was a problem with some of the files associated with the application. A phone rep at Apple's Customer Service provided me with emails linking instructions on completely uninstalling and reinstalling iTunes. I did the uninstall, then checked for lingering iTunes files and couldn't completely remove some, but tried intalling the latest version of iTunes. It has been running for roughly 24 hours. The status bar is green all the way across, and when I try to cancel, I get the following message: "Are you sure you want to cancel iTunes installation?" I keep hitting "no," but am staring to wonder if there is a problem with the install. Should it take this long if I have roughly 134 gigs of music? I can still see the music in my computer's C drive, so I am worried that there is an error, perhpas because I didn't clear out all the lingering C:\Program Files\Common Files\Apple\ and all the lingering C:\Program Files\iTunes\. Any thoughts?

It is not just the HP. I have 3 HP computes and 2 Dell computers. 2 of the HP and 1 Dell suffer the iTunes internet block. Took me a while to figure it out also. But, the one thing that is different on the Dell, is that I can leave iTunes installed and not open it and everything works. As soon as I open it, internet access goes down. BUT secure sites (https:) works fine.

TA24326 My HP desktop running Windows Vista 32-bit no longer recognizes my iPhone 4 when I connect it. How do I correct this?

My HP desktop running Windows Vista 32-bit no longer recognizes my iPhone 4 when I connect it. How do I correct this?

Device not recognized in iTunes

HP LaserJet 5000 support in Windows 7 64-bit

I recently purchased a Dell Laptop that has MS Windows 7 64-bit OS and I have an old Dell Desktop 4400 w/Windows XP I have a HP Laserjet 5000 printer connected to the LPT1 Port. I have the printer shared and I can connect to it with my other laptop that has the MS Vista OS. I can not get my Laptop that has Windows 7 to connect to it and I have tried everything that I can think of. I logged on to my Laptop with Windows 7 and downloaded the latest driver from the HP Web Site. The drivers for the LJ5000 are called Universal Drivers. The drivers are installed on my W7 System and then I go to the Start/Devices and Printers and "Add a Printer" option. I select the "look in the network option" and Windows looks for the Shared Prnter and finds it. I select the printer and it starts looking for the driver. I think it looking on the computer where the printer is connect to anyway, it cannot find the driver. I get a dialog box that says it can not find and gives me the option to browse. I then browse to the Universal Driver that I downloaded for HP5000 and I go the folder that has the ".inf" files. The program tells me that it can not find the driver for HP5000. What am I doing wrong? Does Windows 7 support the HP Laserjet 5000 printer. I sure hope so because I can afford to buy a new 11"x17" printer. Can anybody out there help me? Thanks.
This question was solved.
View Solution.

Try the following: on the Windows 7 machine go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then click on Windows Update and then select the appropriate driver.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Drivers/Help for HP LaserJet 1022 for Windows 7 (64 bit)

I have a LaserJet 1022 which doesn't work with recently upgraded Windows 7 (64 bit). I downloaded the drivers from the site, but the printer properties in Windows says that it doesn't need drivers, yet it doesn't appear in my list of printers when I go to the print dialog. When I run the plug & Play basic driver wizard, it stalls at the point where it asks user to connect the device. Despite the device being connected (and displaying in Printers and Devices) the wizard just hangs at this point, and I have to cancel setup. Please help, I have to have a printer, and the reason why I chose this Laserjet is specifically because it is easy to install.

Dionee,
I dont think replacing it is in order quite yet See if the document helps provide a resolution and if not post back with any new details and we can move onto the next step from there.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Unable to install HP Laserjet P1005 on a Windows 7 64-bit OS system

I have attempted to install both the full package and just the driver for an HP Laserjet P1005 local printer to my personal PC which I updated the OS to MS WIndows 7, 64-bit version numerous times and I have been unsuccessful each time. On each attempt to run the installer, whether it be the full version or just the driver, and you come to the point in the installation process where you are to plug in your local printer's USB cable to your PC I keep encountering an error message indicating that the USB device is not recognized. A further investigation reveals that there is in fact an unknown device. I click on this and I encounter a Microsoft generated message which indicates the following information - Windows has stopped this device because it has reported problems. (Code 43)
The following Microsoft web site - http://support.microsoft.com/kb/310123
has the following Recommended resolution
One of the drivers controlling the device notified the operating system that the device failed in some manner.
If you have already run the Troubleshooting Wizard, you might want to check the hardware documentation for more information about diagnosing the problem.
Well, I went through all of the above recommended actions and I got nowhere. I went back on the web and did some further research. This time I found the following information at the following HP web page -http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-59850-1&lc=en&dlc=en&cc=us&lang=en&os=1060&product=3435668
This was a link to an HP web page which pertained to a so-called repair utility software that was for an HP Laserjet P1000 and P1500 Series Plug and Play Recovery Utility.I tried this but it has not rectified my problem installing the driver for my local printer.If you have the magical solution to this problem I would appreciate it if you could provide it to me. Thank you.
<text removed for privacy>
Message Edited by WendyM on 11-29-2009 08:25 PM

WendyM: I seem to have EXACTLY the same problem...
- New Sony Vaio with Windows 7 Home Basic 64bit factory installed
- HP LaserJet P1005 as a local printer
- P1005 was first installed on the Vaio using the original install CD and sort of worked
- worked OK for the installing user but only intermittently for the other user
- both users had problems with the printer queue locking up in various situations (only solution was to reboot)
- decide to try and update the installation of the printer
- downloaded both the driver files you speak of from HP
- small Plug and Play file (c4Mb) got into endless loop when trying to pre-install drivers and had to be killed
- large full installation file (c167Mb) also failed to install properly
- tried uninstalling and rebooting various times after various failed attempts to get this full package to work.
- situation now is that the P1005 is simply uninstallable on the Vaio but continues to work fine on two XP machines (see below)
- a detail: when the P1005 is plugged into any machine (Vaio or XPs) USB reports that it could run faster if it was on a USB 2.0 port
- this seems to be a strange message on a 2010 Sony Vaio which obviously has USB 2.0 ports
- stranger yet, the XPs are completely unaffected by this message, and print to the P1005 normally, as they always have
The XP machines:
- One XP machine is an old 2006 HP Pavilion
- The other XP machine is a 2009 Acer netbook
- both machines with their original factory installed XPs, and both regularly updated
- the P1005 is a local printer on all machines
- each machine is plugged into it when printing is needed and the 2 XP machines always connect and print, regardless of the USB speed message
- the P1005 even works from the XPs via an unpowered USB physical hub with a USB mouse connected as well
HP really seem to have gotten themselves into a rather shameful mess over their printer drivers. In the year 2010 it seems insane that plugging a printer into a computer is so stunningly complex.
Indeed HP seems to be going rapidly backwards. The Vaio was bought to replace the old 2006 Pavilion (an excellent machine which has never put a foot wrong despite the most intensive use, and which continues to work fine if a little slowly in comparrison to the newer machines) because when we saw the HP replacement we were so repelled by its awful ergonomics, physical appearance, and ragged construction (raw metal edges round the front corners!) in comparisson to the Pavilion that we didn't need any convincing to buy the wonderfully constructed Vaio. Now we discover that a printer that works fine on XPs is unusable on Windows 7. A strange form of progress indeed.
For many years I revered the quality of HP products. No longer I'm afraid. The Pavilion became a Vaio. I wonder what will take the place of the P1005 (I am actually being extremely restrained about the P1005 because it compares miserably with its sturdy predecessor: our sadly missed HP LaserJet 1010),
Regards
cricobr

Re: ATI HD 2600 PRO WINDOWS 7 64 BIT BOOTCAMP DRIVER ERROR

Okay - I *think* I was able to get the modified INF to work properly now - it turns out there were many more instances where changes needed to be made that my original procedure did not address. The updated procedure is below with additional steps added.
Procedure to manually update iMac Radeon HD 2600 PRO video card under Windows 7 (64 bit).
Rationale:
> Boot Camp drivers incorrectly identify the video card my 24" iMac (Dual core; 2.8 GHz - graphics card is shown as a "ATI Mobility Radeon HD 2600 XT") - this has been a long-standing problem when using my iMac under Boot Camp. There have been reports about how to update the drivers manually by obtaining them from ATI/AMD then installing them.
Background:
> When I was previously running Windows XP, I was able to perform the graphics driver update per the online instructions, without any problems.
> When I updated to Windows 7, 64-bit (because I was updated my Mac OS to 10.7 [Lion] and Windows XP was no longer supported in Boot Camp), I could no longer update the graphic card drivers to the Win7 64-bit version (it was giving an error that the driver was not supported).
> The solution I finally came upon was to modify the installer .INF file that comes with the drivers from AMD. I take no credit for this, except from the fact that I adapted a procedure I found for doing this for graphics cards in notebooks. The original place I found this is here <http://forum.notebookreview.com/gaming-software-graphics-cards/370695-guide-upda ting-your-ati-drivers-manually.html>.
NOTE & DISCLAIMER: I don't claim to fully understand every step that is going on here, nor if every step is needed. I based this on the procedure referenced in link immediately above and it seems to be working for me (that is, my graphics card driver was updated for Win7, 64-bit just like had been previously under WinXP) - YMMV.
>> This procedure was done with the AMD Radeon™ Desktop Video Card Drivers for "64 bit Windows Vista/Windows 7 "; Version 11.7, posted 2011-07-27 (main page: http://support.amd.com/US/Pages/AMDSupportHub.aspx)
1. Driver only was downloaded from AMD.
2. Downloaded file was installed to default location: C:\ATI
3. Gather info about the graphics card:
a. Open the Device Manager (Start>Computer [right-click]>Properties)
b. Expand the "Display Adapters" item to reveal the GPU (mine was listed as "ATI Mobility Radeon HD 2600 XT")
c. Right-click on the GPU and select "Properties"
d. Click the "Details" tab in the Properties window.
e. Click the drop-down under "Property" (top item should say "Device description) - find the item in the list that says "Hardware Ids"
>> There were four values for my card, shown below:
PCI\VEN_1002&DEV_9583&SUBSYS_0083106B&REV_00
PCI\VEN_1002&DEV_9583&SUBSYS_0083106B
PCI\VEN_1002&DEV_9583&CC_030000
PCI\VEN_1002&DEV_9583&CC_0300
f. Right click on the first value and select "Copy" - paste it into a separate document.
g. Go back and click the drop-down under "Property" - find the item in the list that says "Inf section" (it was far down the list).
h. Copy the value shown there and paste into a separate document; my value read: ati2mtag_M76
4. Modify the INF file from AMD:
a. First thing I did was make a copy of the directory containing the files that were installed in step 2 (located at C:\ATI) - my directory was called "11-7_vista64_win7_64_dd".
b. Go into this path: C:\ATI\Support\11-7_vista64_win7_64_dd\Packages\Drivers\Display\W76A_INF
c. Find the INF files (icon is a document with a gear on it), that start with "C7..." and "CH..." (mine were called "C7122569" & "CH122569").
d. Open the "C7..." file (it opens in Notepad).
e. The first thing I did was find and replace all existing instances of "M76" in the INF (I arbitrarily replaced it with the following value "M7a6"). There are a number of existing references to this property type in the original INF.
> I do not know if this is absolutely necessary but I found that it helped me to distinguish what was originally there with what I was modifying.
f. Do a "Find" command for "ATI Radeon HD 2600 PRO" (if you search for a shorter phrase, be aware there are other "2600 PRO" cards in the list).
> The exact line I found was <"ATI Radeon HD 2600 PRO" = ati2mtag_RV630, PCI\VEN_1002&DEV_9589>
g. Replace that line with the Inf section value and the first Hardware ID value, using the same format as the original line. The new entry I made read (notice that each successive entry has an addition <space> between the end of 'PRO' and the ending double quote):
"ATI Radeon HD 2600 PRO" = ati2mtag_M76, PCI\VEN_1002&DEV_9583&SUBSYS_0083106B&REV_00
"ATI Radeon HD 2600 PRO " = ati2mtag_M76, PCI\VEN_1002&DEV_9583&SUBSYS_0083106B
"ATI Radeon HD 2600 PRO " = ati2mtag_M76, PCI\VEN_1002&DEV_9583&CC_030000
"ATI Radeon HD 2600 PRO " = ati2mtag_M76, PCI\VEN_1002&DEV_9583&CC_0300
h. Next do a find for all instances of "ati2mtag_RV630"; for every instance you will need to replace that value with " ati2mtag_M76".
i. Next do another find for "RV630" and make sure to replace all instances with "M76" (this is to catch the couple of places where it doesn't have the "ati2mtag" prefix)
j. Close the file, saving your changes.
k. Repeat steps 4d - 4i, using the "CH..." file.
> I personally do not think this is needed since I believe the "C7…" INF is for Windows 7 and "CH…" is for Vista, but I modified both anyway.
5. Update the graphics driver using the modified INF files:
a. Go back to the Device Manager and expand the "Display Adapters" item again to show the "ATI Mobility Radeon HD 2600 XT" GPU
b. Right-click on the GPU and select "Update Driver Software..."
c. In the resulting window, choose "Browse my computer for driver software".
d. I navigated to the "C7..." file along the following path: <C:\ATI\Support\11-7_vista64_win7_64_dd\Packages\Drivers\Display\W76A_INF>
e. At this point, I was shown a window that showed "ATI Radeon HD 2600 PRO" twice (that's all that was in the list). I selected the first instance and it moved on.
f. I got a warning that the driver was unsigned, obviously I allowed it to move forward with the installation.
g. The updating proceeded and the screen momentarily went black, twice. After the second time the description in the Device Manager changed to reflect that the GPU was now "ATI Radeon HD 2600 PRO".
FINAL NOTE: as of right now everything seems to be running properly and I have experienced no problems or graphical glitches. If anyone reading this sees an obvious problem with what I've done, please let me know. I have run benchmarks between this and the standard installed mobility driver and I get about a 10% increase in overall FPS (using the free "NovaBench" app by NovaWave).
< Edited By Host >

look what this guy said:
Hi Guys,
I've spent a few hours over the last week trying to find something that works to update the driver. Using the Mobility Modder from Driverheaven I managed to install the Catalyst 7.8 but not the actual driver - you need to modify the INF for this. The only problem is that I can't be sure what the differences are between the mobility 2600 and the standard-computer 2600. I would like to assume it's just a few settings such as power saving and interal/ external displays.
I tried to modify the INF and used the settings for the standard graphics card. It worked fine, but I put the original Apple driver back on because I didn't want to find out I was overclocking the Graphics CPU accidentally.
After using mobility modder I added this line just after the mobility 2300 graphics card entry:
"ATI MOBILITY RADEON X2600 XT " = ati2mtag_RV630, PCI\VEN1002&DEV9583
If you notice and compare the mobility and standard entries, the mobilities have the same ati2mtag but followed by M-something rather than RV-something.
This appears to direct the INF to the correct setup of the Catalyst software for that card - as I say, I used the settings for the standard 2600 card and it installed ok. I didn't try any games though.
On another note, I'm resisting doing anything further or testing any games until I have the screen issue resolved - after exchanging the naff 20" screen with it's horizontal shading (a dark shade at the top to a light shade at the bottom - very noticeable with darkish solid colours!) I've found my new (more costly!) 24" is having some problems with picture breakup, though so far only in Vista which I installed via Bootcamp.
I wish Apple would get there act together. It's my first Apple and I was expecting great things! So far, I would have had less hassle if I had built my own computer with Vista on and thats saying something!!
Matt
he added the RV630 string. but i tried that with my exact windows xp driver device ids and yes it still completed the installation successfully,but the fps sill stayed the same

ITunes for Windows 7 64 bit, Windows Live Mail Contacts not (all?) syncing

I have researched this as much as I can but cannot find a solution.
I had my iPhone 4 synced to my Window Vista Home Premium PC using iTunes just fine until January when the PC motherboard crashed. No data was lost and all contacts have been restored to my new PC with is Windows 7 Home Premium (64 bit). My contacts are in Windows Live Mail (Windows Contacts) and I'm syncing via iTunes with "Sync Contacts with: Windows Contacts" selected.
However, not all contacts are syncing with my iPhone. In fact, I'm not sure they are syncing at all, although the sync function goes through. It may be that the only ones that sync are those that existed before the new PC (i.e., the Windows Vista contacts which were in Windows Mail). I have created new contacts on both the PC using the new version Windows Live Mail and on the iPhone since the crash, and would like to get them synced up.
Symptoms:
1) Some specific contacts on PC are not on the iPhone after multiple sync attempts.
I have so far positively identified one contact that did not sync. It shows in Windows Live Mail under Contacts, however it does NOT show up in my Windows username/Contacts folder!
2) One Contacts group on PC is not on the iPhone, although two others are (they probably were from before the crash).
I have so far positively identified one group that did not sync. It shows in Windows Live Mail under Contacts groups, however it does NOT show up in my Contacts folder as a .group file!
3) The same group as #2 also does NOT show up in the iTunes group list under "Selected Groups" on iTunes, but the other two groups do. (I do not use "selected groups" because that disables "all contacts" syncing, but the groups are visible grayed out on the list.)
4) As a test, I created a new contact on my iPhone, synced, and it shows up now in Windows Live Mail Contacts; it also shows up in my Windows username/Contacts folder.
5) As a test, I created a new contact in Windows Live Mail and it does NOT show up in my username/Contacts folder. I synced the iPhone again and it does NOT show up on my iPhone contacts.
OK folks, where are these missing contacts going and how can I get them synced?? Thanks!
PS: I have the latest iTunes 10.5.3.3, no updates are available. However, Apple Support/iTunes seems to suggest Windows 7 64 bit either "does not use Windows Contacts" (which seemed quite wrong until I ran the tests above), and also that Windows 7 64 requires iTunes 10.4.1, which I cannot install because I have a later version installed. I would have assumed the correct version installed for my OS when I installed iTunes on the new PC. iTunes runs fine by itself and in coordination with my iPhone other than the above issue.
PPS: This site seems potentially relevant, however is highly technical: http://liveunplugged.wordpress.com/2011/02/04/windows-live-mail-contacts-databas e/
but doesn't help with this problem.

I didn't get any help on this from the forum, but from studying around and experimenting with different approaches, I have come up with the following conclusions:
Under Windows Vista, Windows Mail synced its contacts with Windows Contacts [which are in c:\users\username\contacts]. iPhone via iTunes synced with Windows Contacts. Changes to either Windows Mail Contacts or iPhone contacts would always update each other. Life was good.
Under Windows 7, Windows LIVE Mail (WLM) does NOT sync its contacts with Windows Contacts. It puts them into a hidden database. If you have prior Windows Contacts and brought them along for the ride, they are still there in the folder but they are not connected to the WLM contacts database
When you first set up Windows Live Mail, you can import your Windows Contacts and they appear to be synced. (In fact, they are, but only at that single point in time.)
If you change any Windows Live Mail contact or add a new one, it does NOT change in Windows Contacts. It only changes in the WLM contacts database. It therefore does NOT sync to your iPhone.
Similarly, if you change a contact on iPhone or add a new one, it will sync with Windows Contacts. However, this does NOT update your Windows Live Contacts.
So, from what I can tell, here is what this means: to maintain a steady state, you have two choices:
Whenever you update or add a contact, add it in either iPhone or Windows Contacts [the Windows Contacts folder has a "New Contact" button], and they will stay in sync with each other. Then manually update or add it in Windows Live Contacts to keep those up to date so you can use them for e-mail. OR
Whenever you update or add a contact, add it in either iPhone or Windows Contacts, and they will stay in sync with each other. DO NOT manually update Windows Live Contacts, but realize they are not always up to date. If an address needed for an e-mail is not in there, manually retrieve it from your Windows Contacts or your iPhone and insert it into the e-mail. [Having done that, you can right click on the address in the e-mail and add it to your WLM contacts if you want.] Periodically, manually delete all of your Windows Live Mail Contacts and then re-import your Windows Contacts into Windows Live Mail and, voila, your contacts are in sync again! (Isn't that great, I mean really awful??)
NOTE: If you follow course #2, DO NOT import your Windows Contacts into Windows Live Mail contacts without deleting your existing Windows Live Mail contacts, or you will end up with a double set plus the new ones.
FURTHER NOTE: I obviously can't make any guarantee you won't lose data if you follow course #2. Be sure you have a complete backup before deleting your WLM contacts. However, I will say that after experiencing a double set of WLM contacts (by failing to understand the first NOTE above), it was impossible to pick out the new items [WLM will now show you the date of entry or modification of the contact, so you can't sort by date], so I deleted all of them and re-imported my Windows Contacts and had a complete set again.
AND ONE FINAL NOTE: I have not tested how any of this affects Windows Live Contacts used online outside of Windows Live Mail, because I do not use Windows Live online.
Please post further comments if you have any more information on this topic.

Itunes 10.5.1 will not install on windows 7 64-bit

When ever i go to install iTunes 10.5.1 on my computer i come up with this error message
An error occurred during the installation of assembly 'Microsoft.VC80.CRT.type="win32', version="8.0.50727.4053".publicKeyTocken="1fc8b3b9a 1e 18e3b".processorArchitecture="amd64". Please refer to Help and Support for more information. HRESULT: 0x80070BC9
what do i do?

Same problem for me. iTunes 64bits instlls well up to 80% of the process.
then it says that some software components are missing.
I was never able of completing my iTunes installation (on my new computer).
earlier versions are no longer available and the iTunes for 32bits isn't accepted by Windows 7 64 bits.
Can anyone at Apple explain what this is ?
Has anyone experienced the same problem ?

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

FF 15.0 on Windows 7 (64 bit) PC opens in Safe Mode but will NOT open after letting FF do reset procedure; now "stuck" in loop.

1) FF 15.0.0.4619 on Windows PC 64 bit machine. No themes; about a dozen fairly standard plug-ins; a few extensions - fairly vanilla setup. Been having occassional problem this past week in viewing web PDFs.
Crash occurred after some program (adobe ??) wanted to do routine update.
2) Upon clicking FF icon pop up indicates "problem and unexpected crash" but clicking details button does NOT provide any info. Clicking on Restart FF button offers me option to Start in Safe Mode or Quit FF.
3) Starts in Safe Mode and first time I did that FF reported Java as being disabled and NOT upto date. Did Java update/install (Java Platform SE 7 U7 10.7.2). FF still will not start except in Safe Mode.
4) Re-booted computer ... Clicking FF icon brings up pop up with problem and crash sentence but no details. Following screen offers Reset to Default option, and upon clicking Reset it takes me back to the same pop up - so I am stuck in a loop that seems to accomplish nothing. Using Reset upon entering Sage Mode results in same loop.
I really hate using IE so appreciate any assistance in getting back to beloved FF.

http://kb.mozillazine.org/Standard_diagnostic_%28Firefox%29

TS1829 Can't install iTunes on Windows 7 64 bit system

I get this message: "errors occurred during installation before iTunes could be configured" while trying to install iTunes 64 bit on Windows 7 64 bit. Tried turning windows Defender and running it but same result. Itunes worked fine on Vista, but since going to Win 7, no luck. Can't update iPhone or anything :-(

Are there any special charaters in your user name? I know that has caused issues in the past. You might need to contact Adobe support for this one.
Chris

Up grade to Windows 7 (32 bit)

Similar Messages

Maybe you are looking for