Update 2.0.1 ( 5B108 ) Australian Users

After Installing the update, you may have difficulty downloading data or using weather updates, etc. You may recive the following message *"Unable to access the cellualr data network".*
To fix this simply turn "3G" ON then OFF, or OFF then ON, this will re establish connection with the carrier, Telstra, Optus or Vodafone, and data will be restored to normal.
General impressions of the update indicate slightly faster access but not notciably more than prior to the update. Battery life still 3-4 days.

There is still a update carrier settings that keeps failing when I try to update. I heard this is not a problem? Can someone confirm or how you resolve this issue?

Similar Messages

  • Mac App Store update: right Apple ID but wrong user account

    My Mac App Store updates get associated to the wrong user account but the correct Apple ID.
    I live in Germany and have an iMac and a MacBook Pro, both purchased under Snow Leopard and now running Lion 10.7.2. Just after upgrading to Lion I "purchased" a free App (BibleReader 5.0.0). This morning I logged into my wife's user account on the MacBook Pro, and the App Store icon flagged an update. I switched to my user account and was surprised to see that the update wasn't flagged there. By listing my purchases I did suceed in finding an "update" button for BibleReader, but pressing it resulted in a (German) error message whch translates as "An update is available for another account. Please log in with the account you used to purchase the App". But that is what I had just done.
    Intrigued I went back to my wife's user account. By logging onto the Mac App Store with my Apple ID from my wife's user account I did manage to update the app. Later at work I got the same error message on the iMac. But this time the only other user account on the machine belongs to Computing Services: I don't have their password and I ought not to use admin rights to gain access to their account. So I can't perform the upgrade on the iMac.
    All family iTunes / App Store purchases are via my main Apple ID. My wife's user account on the MacBook Pro only exists so that I can manually synchronise our iCloud address books (she has an iPad).
    Any ideas?

    Welcome to the Apple Support Communities
    All the applications you purchase on the App Store are registered to your Apple ID, so you have to use your Apple ID to update them, or you have to purchase those applications again using the Apple ID they are using on that computer, so they will be able to update them

  • What is new from the update 5.0 for Iphone 4 users?

    what is new from the update 5.0 for Iphone 4 users?

    Click......
    what is new from the update 5.0 for iphone 4 users?

  • I am adopting my daughter's old macbook pro  laptop after my laptop crashed. Do I simply restore her old laptop to my latest backup? Will it update her old laptop to my user info?

    I am adopting my daughter's old macbook pro  laptop after my laptop crashed. Do I simply restore her old laptop to my latest backup? Will it update her old laptop to my user info? MacbookPro OSX 10.9.4, restoring from Timecapsule

    Use these guidelines:
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
    This will insure that the Mac is totally yours with any imprint from your daughter.
    Ciao.

  • Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

    Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

    Okay, mine now works here is what I did.
    plug in the iPhone, iPad etc
    in iTunes select the phone or iPad
    Under Summary uncheck "Sync with this....."
    Under "Music" uncheck the "Sync Music"
    Let it remove all the songs, dont worry it will come back no problems.
    Once that is all done all the music on the phone or ipad should be gone.
    Now check them both back on and everything should copy back onto it.
    Working now !!!!!

  • Update the database table inside an user exit.

    Hi Experts,
    I have a issue where i have to update a custom table in an User exit.
    I am using Lock object for ENQUE/DEQUE.
    I have tried to use statements like UPDATE/MODIFY inside the user exit.
    But the problem is that it's not updating the database table at the same time.
    I know if i use COMMIT WORK it can update at the same time but it's not advisable to use COMMIT inside a work.and also it gives a short dump.
    The real issue is that this custom table is read for batch creation at the same time for different users.
    Now if it the program does not update the database table at the same time then other users also read the same data and create the same Batch number..
    While requirement is to create a different/unique batch numbers.
    Program is updating the table but it's taking time..so in between other users are creating the same batch number.
    Please guide me what would be the best solution for this.
    Regards,
    Amit Kumar Singh

    Thanks for your quick reply.
    My actually requirement is like that.
    I have to create a Process Order using tcode COR1.
    After passing some input value it goes inside an User Exit.
    There one Custom table is maintained which stores some fields like month,year,numeric key field,etc.
    The new batch number is created using the combination of these table fields.
    Once a new batch number is created it increment the numeric key field number by one.
    Issue is we have to update this new numeric field value into the database field so that other users can read a diffrent numeric field value.hence it will create a new/different batch number.
    Here i am not able to update the database table inside this User Exit.
    Table is geeting updated but after some time and out of this User Exit.
    Please suggest what's required in that case?
    Regards,
    Amit Kumar Singh
    Edited by: Amit  Singh on Feb 3, 2009 11:33 AM

  • HT4623 I am trying to update my apps with a new user ID - I have changed it in settings but how to I change it in apps store - it keeps asking me for a password for my old user id?

    I am trying to update my apps using a new user ID.  I have changed it and I can't get it to change in the App Store.  It keeps asking me for a password for my old ID??

    YOu can't update your apps with the new apple id.   All apps are tied to the apple id that was used to purchased it, you will need to enter your password from you old id to update.

  • When I try to log into the app store to update apps or buy apps the user name that appears is an old one and it will not bring up the current user name/ email how do I stop that so that my current email show up ??

    When I try to log into the app store to update apps or buy apps the user name that appears is an old one and it will not bring up the current user name/ email how do I stop that so that my current email show up ??

    Settings>Store: Tap the AppleID and choose "Sign Out", it will then prompt you to sign in and you can use the new AppleID.
    NOTE: Apps must be updated with the AppleID they were purchased under.
    EE

  • Latest update 3.3 only for lion users? total mess

    apple did a major step to indicate that aperture is no app for "pro"users. If it should be that it should support not only the latest system version!
    latest update 3.3 only for lion users? total mess.
    I will look for another solution. Sad.

    Hi,
    I was wondering if somebody could give me some guidance please?
    I bought an N73 in September after much research and a lot of deliberating, I decided to purchase one (via O2 in England) even though i had heard lots of unhappy people claiming the phone had ruined their life etc due to its software faults.
    I haven't updated my phone yet since buying it mainly due to being put off by the number of NEW problems the updates can cause.
    I dont have any major problems with my phone, its got a bit slower with time and the camera isnt very quick when uploading and sometimes switches off (but i think its to do with the slide mechanism on the back), anyway i would be grateful if you would give me your honest opinion as to whether i should upgrade to the latest firmware or not!
    Many Thanks
    Richie

  • My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password, whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    dom59 wrote:
    Ok, when I go into my Apple ID account, everything looks right.  It does show my user name.  It's only on the iPod that it shows my husband's previous user name, and it asks for his password.  Everything in iTunes and my account looks right.  The issue only seems to be with the actual device, iPod Touch 4th gen.
    There is more than one way to access the Apps Store and the iTunes store.  One is via iTunes on your computer, and the other is via the apps on your iPod.
    Just because you are logged in on your computer does not mean you are logged in on your iPod.
    The reason your husband's user name comes up is because he was the last one to log on.  You can change that by going to Settings>Store.  Tap the Apple ID, Tap Sign Out, Tap Sign In, Tap Use Existing Appel ID, enter your e-mail address and Apple ID password, and tap OK.

  • Force Adobe Shockwave updates to install as a restricted user:

    For security purposes I'm investigating what it would take to force Adobe Shockwave Player updates to run under a restricted user account in a corporate environment. I was hoping for a solution similar to Adobe Flash where you could create a scheduled task to run the update as the SYSTEM account but shockwave seems to behave a little differently than Flash.
    I've also read that you can enable/disable auto updates by modifying the registry keys "HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Macromedia\Shockwave 10\AutoUpdate" and "HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Shockwave 12\AutoUpdate", however, when I modify these parameters they are not reflected when you right click on the shockwave video player -> select properties -> and then check/uncheck the update options. Am I missing something here?
    I have been testing with a somewhat older version of Shockwave to see if it would ever update to the newest version but I can't see where it ever updates. Have others run into this issue? How do you keep shockwave up to date in your corporate environment?

    You might want to look at implementing Munki. Munki is mainly intended as a means of distributing both initial Application installs, but also updates for those applications, e.g. Microsoft Office. It can however also automate installing Apple Software Updates. Importantly it does not require the end user to ever enter any administrator details to allow these updates to be installed.
    See https://code.google.com/p/munki/wiki/AppleSoftwareUpdatesWithMunki
    (Munki is free.)

  • AT1S0 - ICS Update for Australian users - When?

    Hi, do we have any estimate for ICS update for Toshiba Thrive mini AT1S0 7"???
    USA users already got it, what is about Australia? Thanks in advance.

    What build number do you have installed?
    Also what PDAxxx-xxxxxx model number do you see in Service Station?
    I needed to install the small Honeycomb update to build number v3.2.1.33.5.0002 through Service Station, then the ICS update appeared afterwards after checking for Service Station updates again.
    Make sure you have a direct internet connection, I don't think service station works through a proxy.

  • How do you update software when there are multiple users with different (unknown) apple ID's?

    We are a college with different users borrowing 'loaner' Macbooks.
    several users with different ID's have installed software that is now tied to that Machines serial number, and cannot be updated or removed apparently. We are trying to update iPhoto for use with iBook author, but it was installed by an unknown user and cannot be removed.

    The only practical solution is to wipe and re-provision the units when they're returned.

  • Remote Software Updates and Sending Task Status to User

    I am updating user's machines using ARD 3 with the unix command 'softwareupdate -i -a'. With some updates, a restart is required and ARD posts this within the task status column.
    I was wondering if there was a way to grab that task status of "restart needed" or "succeeded" and then send that to the user when the software update has completed.
    Any help would be appreciated.
    Thanks.

    System restart checkbox is used to control what happens outside of MW.
    If you have no MW and did not select to restart outside of MW then systems will reboot after installation completes (unless user overrides it and does it sooner). Keep in mind that the 90 minute and 15 minute restart countdowns will be displayed if user is
    logged in (unless you have changed the times) if user did not interact with any notifications to select other options like install and reboot ahead of time.
    If you have MW and did not select to restart outside of MW, then PC will not reboot until MW starts (unless user overrides it, of course).
    If you select to reboot outside of MW checkbox then PC will reboot after installation ends, no matter if MW is set or not.

  • Can't update or purchase apps because old user name (MobileMe) comes up automatically and can't change to new user I'd

    I can't update or purchase apps after changing my iTunes user I'd . Old (MobileMe) user id comes up automatically and doesn't allow change. How do I take care of this? I've even deleted MobileMe from iPad

    Deltacoman wrote:
    It won't recognize the password I used when buying the apps.
    Hmmm...
    That should work.  Go here to determine if there is perhaps a third Apple ID involved!  If not, perhaps your memory isn't what is used to be.  Change the password.
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

Maybe you are looking for