Update Button for every Row of Report

hello,
is it possible to get an update button for every row of a report?
After clicking this button, only this row of the report should be updated.
thanks in advance
dave

Create a hidden item on your page. Call it somehow - P1_KEY. Create other hidden fields
for the rest of the columns you want to update. Create a link per report line. This link will be
inserting the primary key of your record into P1_KEY and the other values you want to
update in the other hidden fields. It will branch to the same page and contain a request - i.e. UPDATE_ROW. Then
you create a process - On Load Before Header - which will
take the value from your item P1_KEY and update the record
in the database by setting the the column values to the
values in your hidden fields. This process will fire upon
request you specified. However, this way you will not be
able to update your text areas, since you will not be able
to transfer this over a link. Also you need to be carefull
about special characters.
Maybe there is a better proposal than this.
Denes Kubicek

Similar Messages

Can we have button for every row in report

I am fetching a data from table. i need an update button corresponding to every row of the report. This is a requirement. Right now i have only one button corresponding to the report.
Thanks
Abhi

Hello Abhi,
Could you accomplish what you need by using a Column Link on the column instead of a button?
If not, here is a link where Denes uses a button in every row,
http://htmldb.oracle.com/pls/otn/f?p=31517:54:3198969584076356::NO
-Chris

Radio button for every row in a table

Can anyone tell me how to get abutton for every row of a table.This button is used for selecting taht particular row.
Thanks in advance

Create a table region in Jdev. Then right click on it New--> Choose Single Selection.
Thanks
--Anil

How create dynamic URL for every row shown in the report?

Hi,
Iam new to this Application. I created one interactive report to find the number of bugs logged for every product and its sub component for past one year. The report will look like below structure in the application.
Product Subcomponent Total
P1 S1 10
P2 S2 4
P2 S21 15
Now i want to pick the value of Prouct and sub component for every row dynamiaclly and want to generate the URL with the conditions and make it as hyperlink for the Total Column.
Iam able to make hyperlink for the Total column using the edit options for the total attribute, but it is opening the same page for all the rows in the total column. I want to generate dynamic URL by picking the value prodcut and sub componenet dynamically from the report for every row and want to make it as hayperlink for every row individually.
Please tell me how to do this?
Please revert back if you are not clear. Appericiate for your quick help.

Hello <unknown user>,
So you already set the Column Link attributes for your Total column. Should all links go to the same page, but with different parameters (ProductID, SubcompID)? Or to another page? And how can you determine that page?
Assuming you'll go to a sort of detail page or form:
Target = [Page in this app]
Page = <your target page no>
Item1 = <ProductID field in target page>
Value = #PRODUCTID#
Item2 = <SubcompID field in target page>
Value = #SUNCOMPID#
(you can use the ' flashlight' for getting the correct values)
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

Excel o/p in Reports 9i-additional report header for every row

Dear All,
Is there any way to generate an Excel file output from OracleReports9i.Actually I have tried the simple report.
I am able to create a delimited output.But the prob is it contains an additional report header for every row of the report and this is very strange.Its coming like that
Empno     Ename     Job     7566     JONES      MANAGER
Empno     Ename     Job     7902     FORD      ANALYST
I need the Xls o/p like that
Empno     Ename          Job
7566     JONES      MANAGER
7902     FORD      ANALYST
8877 JAMES SALES
my Environment oracle9i developersuite /forms9i/reports9i
I have given     DESFORMAT = DELIMITED
          MODE      = CHARACTER
I am able to generate the reports in html/HTMLCSSIE/HTMLCSS/PDF/RTF
Only delimited is giving problem
What should i do to resolve this issue. Please help me it is very very urgent for me.
Thanks in advance
Pavendhan.N

I had the same problem and this is what I did, works great. You have the total control.
function BeforeReport return boolean is
fp text_io.file_type;
begin
-- creating a file name
:CP_filename := 'C:\Gap'||to_char(sysdate,'MMDDYYHHMISS')||'.csv';
-- Opening the file in write mode
fp := text_io.fopen(:CP_filename,'w');
-- writing the column headings into the file
text_io.put_line(fp,'"Platform","Sys#","GapType",');
text_io.fclose(fp);
return (TRUE);
end;
and then where ever it is suitable, depending on the requirement, write into file by opening it in the append mode.
function R_G_systemplatformFormatTrigge return boolean is
fp text_io.file_type;
begin
--     srw.message(99,:dname);
fp := text_io.fopen(:CP_filename,'a');
text_io.put(fp,'"' || :systemplatform || '",');
text_io.put(fp,'"' || to_char(:sysno) || '",');
text_io.put_line(fp,'"' || :CF_gaptype || '",');
text_io.fclose(fp);
return (TRUE);
end;
This works great. Hope this helps.

How to display a button in every row in a report page

I am new to HTML DB.I created an application based on an existing table. In the report page I want to include a button in every row that is returned. Can anyone suggest as to how this needs to be done.
Thanks,
Srini.

When build your SQL type query region/report, you create a "button"/link like '<a href="f?p=9120:100:&SESSION.:SELECT:&DEBUG.::P100_USER_ID_LINK:'|| e.user_id || ">[select]</a>' button_url in ....
select distinct '<a href="f?p=9120:100:&SESSION.:SELECT:&DEBUG.::P100_USER_ID_LINK:'|| e.user_id || ">[select]</a>' button_url
, util_common.get_star_no(e.id) star_no
, e.last_name
, e.first_name
, e.employee_no
, e.unit_id
, e.employee_position_cd
, nvl(w.uod_cd, w.uoa_cd) unit
from employees e, watch w
where e.status_i = 'Y'
and w.ssn_no = e.ssn
and e.user_id not in (select c001
from wwv_flow_collections
where collection_name = 'ACTIVITY'
)

How to hide edit link for some rows in report? (according to value of col)

Helo,
How to hide edit link for some rows in report? (according to value of column)
regards
siyavuş

Hi siyavuş
You can do this by taking the edit link off the report and putting it into your report SQL.
Use something like Select CASE WHEN (condition) THEN
'Put your edit link in here as an html Anchor like<a href="(target)">Edit</a>'
ELSE
tt.value
END edit_link
FROM test_table tthope it helps,
Gus..
You can reward this reply (and those of other helpers) by marking it as either Helpful or Correct.
This allows forum users to quickly find the correct answer.
;-)

How to calculate sum of the fields that will be reflected for every row entry??

Probably, the title might not give you the correct view on the question that I want to ask but, I can describe my question. Well, I have an
Excel sheet for attendance where in I have different columns
for 3 subjects (subject1, subject2, subject3) and a
total column. I also have another column named as Student ID.
I would like to write a formula for the total column where, when I enter the number of classes attended in every subject column for each student present in every row, then the total column is reflected with the sum of no.of classes attended in every subject
for each student automatically.
How can I achieve this? I am looking forward for any help. I am a beginner.
Ex: Excel sheet
Student ID | Subject1 | Subject2 | Subject3 | Total
1
|     2
|       3
|       4       |
9
2                |     3
|       5
|      2
|   1
The total column should be reflected with the sum of values under subject1, subject2, subject3 fields automatically for every row. How to do it?
Thank you,
Kaushik.

In the first empty cell of the row of Student 1, enter a formula like
=SUM(B2:D2)
where column B is headed Subject 1 and column D is headed Subject 3, then copy down to match your student list.
Then below the last row of column B, enter the formula
=SUM(B2:BXXX)
where 2 is the row of Student 1, and XXX is the row number of the row above the formula, then copy across to match.

HT4972 I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

How to Place Approve and Reject Button in every row to approve and reject the particular order in sapui5

Hi Experts,
   How to Place Approve and Reject Button in every row to approve and reject the particular order in sapui5.
Please Kindly help me.
Thanks & Regards
Chitti Babu

Hi Chitti,
You can achieve this using sap.m.CustomListItem.
View :
<core:View xmlns:core="sap.ui.core" xmlns:mvc="sap.ui.core.mvc"
xmlns:l="sap.ui.layout" xmlns="sap.m" controllerName="demoallinonegrid.tablewithscroll"
xmlns:html="http://www.w3.org/1999/xhtml">
<Page title="Title">
<content>
<ScrollContainer horizontal="true" width="100%">
<Table id="empTable">
<headerToolbar>
<Toolbar>
<Label text="Employees"></Label>
</Toolbar>
</headerToolbar>
<columns>
<Column width="12em">
<Label text="Employee Id"></Label>
</Column>
<Column width="12em">
<Label text="Last Name"></Label>
</Column>
<Column width="12em">
<Label text="First Name"></Label>
</Column>
<Column width="12em">
<Label text="Title"></Label>
</Column>
<Column width="12em">
<Label text="Approve"></Label>
</Column>
<Column width="12em">
<Label text="Reject"></Label>
</Column>
</columns>
</Table>
</ScrollContainer>
</content>
</Page>
</core:View>
Controller:
var model = new sap.ui.model.json.JSONModel();
model.loadData("http://services.odata.org/Northwind/Northwind.svc/Employees?$format=json",null,false,'GET',false,null);
this.getView().byId("productTable").setModel(model);
var template = new sap.m.ColumnListItem({
cells:[
        new sap.m.Text({text:"{EmployeeID}"}),
        new sap.m.Text({text:"{LastName}"}),
        new sap.m.Text({text:"{FirstName}"}),
        new sap.m.Text({text:"{Title}"}),
        new sap.m.Button({text:"Approve"}),
        new sap.m.Button({text:"Reject"})
this.getView().byId("empTable").bindAggregation("items","/value",template);
Output:
Regards,
KK

Ref Cursor: trip to DB for every row?

If I return a ref cursor from a stored procedure to my java program, when I select the rows from the result set, does it go back to the db for every row, or are all result set rows downloaded at once when the result set is opened? Thanks.

Neither. :)
This likely works the same way as when you open a normal cursor: depending on the prefetch value (or -in JDBC 2.0/SQLJ parlance- the fetch limit) you'll fetch up to so many rows at a time. If you do not say anything, an Oracle JDBC (or SQLJ) driver will fetch up to ten rows at a time, though you can adjust that setting to your liking.

Results not updating for every row in BIpublisher

Hi all I have a Bi publisher report that is updating the results for the first row and in the second row to update the results it is picking the values from the first column itself and using the same values for all the other rows.
Here is my report format
Month saves Total, for 30,60,90,120
Jan
feb
Mar
Total are the enrolls by each month and days shows after 30,60,90,120 how many are still active. Following eg should give an idea of exactly whats happening
Eg:
Total 30days 60days 90days 120days 150days 180days 210days
------------------------------------------------------------------------------------------------------------------------------------------------------------ Jan saves 330 287 274 270 263 262 259 257
Feb saves 298 255 242 238 231 230 227 225
Mar saves 291 248 235 231 224 223 220 218
So what is happening is lets say for example there are a total of 330 enrolls in january and after 30days 287 are still active and after 60days 274 are still active after 90 270...... etc
Am getting the January active values correctly.
BUt going forward when I see the values for february The total enrolls for february is 298 and after 30 days which are active is not giving me the correct.
It is substracting the same amount as jan. looking at the numbers it is substracting
-43, -13,-4,-7,-1,-3,-2 for Jan which are the cancels after the consecutive days
It is substracting the same amount for feb also but my actual cancels for feb are different it should be 45,12,8,9,2,2,
It is doing the same for all the months.
There should be a change in the code. Following is the XSL code am using in
<?xdoxslt:set_variable($_XDOCTX, 'v_SavesCanceled', SAVES_CANCELED_COUNT)?>
<?xdoxslt:set_variable($_XDOCTX, 'v_RtSaves', xdoxslt:get_variable($_XDOCTX, 'v_RtSaves') - xdoxslt:get_variable($_XDOCTX, 'v_SavesCanceled'))?>
<?xdoxslt:get_variable($_XDOCTX, 'v_RtSaves')?>
Actually the cancels should be updated for each row but its picking the same cancels for every month.
Hope it is clear let me know if you need any further info
Any help is appreciated.
Thanks

Thank you very much for your help. The rtf file sent worked and updating results as required.Thank you
Thanks

Classic report - Condition evaluated for every row

APEX 4.2.2
I am seeing something strange in a classic report region. A report started to fail at run-time with a strange error about bad syntax. When I run the page in debug mode, I see the following
print column headings
rows loop: 30 row(s)
...Execute Statement: begin wwv_flow.g_boolean := '' is not null;
end;
......Result = false
...Execute Statement: begin wwv_flow.g_boolean := '' is not null;
end;
......Result = false
...Execute Statement: begin wwv_flow.g_boolean := 'string with a embedded ' single quote' is not null;
end;
......Result = true
Looks like the APEX engine is evaluating a boolean expression after rendering and each and every row in the report. And for some strange reason, it is using a piece of data from my query's resultset and failing because of the bad syntax introduced due to the single-quote in the string.
I have never seen this before. Any idea what is going on?
Thanks

Howdy Paul, sorry should have provided all the details. No, this is a standard generic column template. Ah, you are right, drat I should have looked closer. The template has use a condition to show either a highlighted row or normal one. Sorry for the false alarm, I can take it from here. Enjoy your flight :-)

How to rearrange key figures for every row in a report

Hi gurus,
I need help in rearranging the key figures values( product sales for A, B, and C ) in the columns for each sales division row D1,D2,D3 displaying keyfigures in the order of descending sales volume for each division. The order of key figures has to change for each row.
Is it possible through some user exits? Your help is appreciated.
Thanks

Hi,
I am extremely sorry for my earlier post. I am not too sure about that. I heard that we can do RRI on Infoobject.
Please look for other experts inputs. I apologise for that.
Regards,
Suman

Check Box for each row in report -- all rows deleting when pressing DELETE

Hello experts! I have set up a report with a check box for each row. When I click the DELETE button to delete the selected rows, every single one of the rows get deleted...even the ones that are not selected. I have my process point set to "On Submit - After computations and validations".
This is my delete process (SHG is the table and SHG_ID is the primary key):
FOR i in 1..HTMLDB_APPLICATION.G_F01.count
LOOP
DELETE FROM SHG
WHERE SHG_ID = HTMLDB_APPLICATION.G_F01(i);
END LOOP;
Also, I've added to query in the region source this line:
htmldb_item.checkbox(1, SHG_ID) del,
Where does the "1" come into this? Not sure what I am doing wrong!
Message was edited by:
user477193
Message was edited by:
user477193

The 1 (first argument to all the htmldb_item.* APIs) corresponds to the array number in htmldb_application.g_fNN. So 1 will populate array g_f01, 2 will populate g_f02 and so on.
Your code seems fine, it should delete only the checked rows. Are you sure there is no other process on the page that might be deleting the rows? See if you can put up an example on htmldb.oracle.com

Update Button for every Row of Report

Similar Messages

Maybe you are looking for