Update form not returning correct data selection in dropdown menu
Using CS3 DW along with SQL 2008 R2. I have a number of dropdown menus on an entry form (using VBScript/ASP) that are feed by SQL queries. All data is accepted in the entry form and writes to the table in the database without any issues. I created an Update form and based on a Rec ID clicked on from a list the Update form is presented with all the data in the correct fields except for one dropdown menu. All the other menus go to the correct selection except for the one. Spent 2 days attempting to resolve this. If I change the dropdown menu to a field the correct data is presented when the form comes up, but doesn't allow the user to make a selection from the menu. When I change it back to a dropdown menu the saved selection is not selected - just lists the entire list of items in the menu. Any help or ideas on this is greatly appreciated.
Hello All,
Once more thank you. I have sorted the issue out.
I observed that I was selecting the wrong field. I selected the field matching the record set of the select instead of the field matching the record set of the table I am working as seen on the image belew
I was selecting this - This is the record set of the table that hold values for the city select list
Instead of this. This is the record set of the table behind the form I am working on
My issue is now re-solved.
Mike
Similar Messages
-
Rtrim in where clause not returning correct data
A select statement specifying
where rtrim(field_name) <> ''
is not returning any rows even though there is data on the table with field_name not blank.
If this particular where clause is omitted the data is returned and rtrim(field_name) is populated correctly.
This is occurring across different tables and in both 10.2.0.4 and 11.2.0.1 databases. I can't find any references to this being a bug.
Has anyone else come across this ? Can anyone explain why this is happening please ?An empty VARCHAR2 is considered NULL by Oracle.
sql> select 1 from dual where trim (' ') = '';
no rows selected
sql> select 1 from dual where trim (' ') != '';
no rows selected
sql> select 1 from dual where trim (' ') is null;
1
1 -
Ensure List/Menu populate my update form with the correct data before update
Hello,
Please how do I ensure my update form is populated with the correct data before update?
On my update page I have text fields and select fields (dynamic list/menu). When I open my profile page to make updates, I see the field well positioned in the text fields but in the select list/menu fields, I see "Select from list" instead of the value that was initiated selected
Correct Values before update
Wrong values during update
As you can see from the images below, when I open the update page, the list automatically populate the select fields with the last values in the list instead of the Initial values that where selected by the user before the update.
Can anyone please review and let me know where I have gone wrong.
Thank you
MikeHello All,
Once more thank you. I have sorted the issue out.
I observed that I was selecting the wrong field. I selected the field matching the record set of the select instead of the field matching the record set of the table I am working as seen on the image belew
I was selecting this - This is the record set of the table that hold values for the city select list
Instead of this. This is the record set of the table behind the form I am working on
My issue is now re-solved.
Mike -
Select statement not returning correct data
I'm working on an application and I'm having a weird problem. The application connects to an Oracle database, pulls out some data, and does something with it. In the process of testing I've already read and dealt with some rows. On those rows the UPDATE_FLAG field was changed to a N so they wouldn't be selected again.
I do want to select those rows again, so with SQLPlus I changed the UPDATE_FLAG back to Y. Now here's the strange part. The same select statement run from SQLPlus is returning thoe row I modified, but my application does not.
Here's the select statement:
SELECT * FROM MY_TABLE WHERE UPDATE_FLAG = 'Y' and USER_ID like 'B%';
When I run this I get a row back called Brian.
In my application I do this:
try
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@server:port:sid", "username", "password");
Statement st = conn.createStatement();
ResultSet rec = st.executeQuery("SELECT * FROM MY_TABLE WHERE UPDATE_FLAG = 'Y' and USER_ID like 'B%'");
System.out.println("SELECT * FROM MY_TABLE WHERE UPDATE_FLAG = 'Y' and USER_ID like 'B%'");
while(rec.next())
System.out.println(rec.getString("USER_ID"));
st.close();
} catch (Exception e)
System.out.println("Error -- " + e.toString());
e.printStackTrace();
}When this runs it doesn't return Brian and there are no exceptions caught. It's like it does not find it.
Assuming I explained this well enough, anyone have any ideas what the problem could be?
Thanks,
JamesI do want to select those rows again, so with SQLPlus I changed the UPDATE_FLAG back to Y. Last time I ran SQLPlus I explicitly had to do a commit after modifications, because it was creating a transaction around the sqlplus session. Of course running a query in that session would work on the modified data rather than the actual data.
-
0SM_CCLM Queries do not return correct data
Hi
I've been testing my queries on various cubes and not having much success. The ATC ones work ok, The UPL ones tend to show no data or time out and the 0SM_CCLM queries show a 0 count always.
On researching the 0CM_CCLM ones a bit more with a colleague, he suggested that the 0SM_CCLRC key figure should have a count in it. I found out that previously that was in error in SP07 and it was amended via note 1779251 - Key Figure 0SM_CCLRC does not exist in the Cube 0SM_CCL and noticed that when the key figure was added, it was done so with a constant value of 1.
My question therefore is whether there is a problem with this cube also and the 0SM_CCLRC key figure does not have a constant value of 1 making the summation impossible and hence all my totals are 0 for all queries on this cube.
Thanks
IanHi Alexander
0SM_CCLM/0SM_CCM_CREATED_OBJECTS_YEAR is one example. -
Discoverer Viewer not showing correct data when scheduled
Hi All,
I have a bit of an ongoing issue and cannot find an answer through Oracle.
We have an issue that when a cross-tab workbook is run manually in Desktop this returns correct data, when scheduled in desktop it returns correct data in desktop, but when opening the scheduled workbook in viewer, incorrect and irrelevant data is returned
Here is a little information on the field that is not returning correct data;
The field is based on a calculation, the calculation (lets call BOB) contains PL/SQL function concatenated with an NVL calculation, this other calculation is a DECODE. I have been playing with changing the content of the BOB calculation, by removing the PL/SQL function and the DECODE calc from BOB and scheduling the report, the data is returned in viewer, in fact i've attempted one without the other and this still does not return the correct data.
This version of discoverer that is not returning data is V 10.1.2.50.05. I've tested this on a later environment with Discoverer V 10.1.55.26 and the data is returning correctly through the sceduled report in viewer.
My questions;
1. Has anyone ever come across something similar to this in version 10.1.2.50.05
2. Is there any detail available regarding what upgrading to 10.1.55.26 offers?
3. Know any workaround for using PL/SQL calculations in a scheduled workbook? I am aware that not aggregable items will not be returned in v11 when scheduling workbooks.
Many thanks in advance for any help.
SimonBumping this thread
Thanks
Si -
BC4J - ViewObject not returning latest data
BC4J - ViewObject not returning latest data. Some kind of EO/VO Cache Latency Issue.
I have an edit page that presents a drop-down list which is suppose to display * un-assigned * messages, but does not. The drop-down list is using an <jbo:InputSelect> tag that gets values from a ViewObject (UnAssignedMessageView ) which issues the query listed below. Note, the ViewObject is not based on an Entity Object.
(Query in UnAssignedMessageView)
select message.message_desc_short, message.message_id
from fmm.message
where message.message_id not in (select cardmessage.message_id from fmm.card_message)
and message.message_id != 0
(from the edit.jsp)
<jbo:ApplicationModule id="am" configname="com.maxmcbyte.fmm.model.ModelModule.ModelModuleLocal" releasemode="Reserved" />
<jbo:DataSource id="ds" appid="am" viewobject="CardMessageView1" /> <<****** The VO where the inserts/updates are recorded.
<jbo:DataSource id="ds2" appid="am" viewobject="MessageUnAssignedView" /> <<****** The VO for the unassigned message drop-down-list.
The problem is at step 3.
Starting with 3 Unassigned Messages.
Step 1: enter new record AND select a MESSAGE_ID from the drop-down list.
Step 2: commit the transaction.
Step 3: enter another record AND select a MESSAGE_ID from the drop-down list. <<****** the list should now be displaying 2 unassigned messages but is displaying 3.
Note, if I check the database after step 3 using the same query as in the UnAssignedMessageView I get the correct result. I guess I'm not understanding how BC4J ViewObject Caching is working. It is strange that even after I commit the record that the cache is not updated.
I have read the docs and will have to re-read them again * but * it would be REAL NICE to see an illustration of "A DAY IN THE LIFETIME OF DATA IN BC4J" for dummies like me.
Can anyone tell me what I'm missing here AND what specifically needs to be done?
Thanks All,
Bill G...Well, I figured it out * BUT * this is the sort of thing that I'll bet stumps a lot of new users * AND * should be posted to a "Gotch-Ya" list.
I'd still like to see an illustration of "A DAY IN THE LIFE OF DATA IN BC4J"
Bill G...
<jbo:ApplicationModule id="am" configname="com.maxmcbyte.fmm.model.ModelModule.ModelModuleLocal" releasemode="Reserved" />
<jbo:DataSource id="ds1" appid="am" viewobject="CardMessageView1" />
<jbo:DataSource id="ds2" appid="am" viewobject="MessageUnAssignedView" />
<%-- adding this did the trick --%>
<%
ViewObject view2 = ds2.getRowSet().getViewObject();
view2.executeQuery();
view2.first();
%> -
In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015
Hi DirTech,
Are both of these dates in the same Excel file? If they're in different files, are you choosing the same language for OCR (optical character recognition)?
If they are in the same PDF file, how was that PDF file created? Was it created from a third-party application (rather than an Adobe application)? If it was created by a third-party application, it could be that it wasn't written to spec, and that's why you're seeing some oddities in the PDF > Excel conversion. (See Will Adobe ExportPDF convert both text and form... | Adobe Community.)
Best,
Sara -
Binocular search for Cost Center is not returning any data
Hi Gurus,
When clicking on the SRM-Shooping Cart-Cost Assignment- Account Assignment Overview- Cost center Binocular search icon, it is not returning any data. However, when drilling down in the Account Assignment Overview, you will see another Binocular search icon for Cost Center which is working fine.
Any idea of how you troubleshoot it.
Thanks in advace for your help.
HANot sure about the cost assignment drill down, but after we applied SP13 to SRM server 550 the binoculars for cost center stopped working. the following note corrected this.
Note 1259735 - Search help of generic account does not work
If it has never worked, then probably need to setup a RFC dialog user for the F4 search help, Multiple threads on here around the dialog user for F4 with details on configuration and use.
JF -
Hi,
I have some ibots that I scheduled to run on a daily basis and which were working perfectly.
Suddenly the same ibots, they run but the content of the attachment says "The specified criteria did not return any data".
I checked the log files and could not see any relavant error.
If I go back in the report that I am sending through the ibot, it runs without any problem.
I tried to send it in different formats and run as different users, but the results are still the same!
Any idea what else I could check?
Type: Warning
Severity: 50
Time: Wed May 15 14:10:19 2013
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 199
Properties: RptPath-/shared/MICROS/giuliano/cube_build_verification;SID-btilnnapkfo2omg91a71b9m6n2;bindID-1;connID-31;ThreadID-4640;statementID-364;RSP-o:go~r:report
Location:
saw.odbc.statement.fetch
saw.subsystem.portal.pdf
saw.delivers.rpc.getDeviceContent
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
SQLFetchScroll returned code SQL_NO_DATA_FOUNDThanks it solved the issue.
But One more thing Now I have placed the parameters in the where clause of the query
Query-
select field1,field2,field3,field4,field5,job_name,candidate_name,interview_date from etc.ethr_irc_int_details
where field1 is not null
and job_name = :1
and candidate_name = :2
and interview_date = :3
in the VO I am executing
public void iniQuery(String S1, String S2,String S3)
System.out.println("insdie ini query of the VO");
System.out.println("S1 "+S1);
System.out.println("S2 "+S2);
System.out.println("S3 "+S3);
this.setWhereClauseParams(null);
this.setWhereClauseParam(0,S1);
this.setWhereClauseParam(1,S2);
this.setWhereClauseParam(2,S2);
executeQuery();
and in AM
ETHRIntDetailsVOImpl IDVO = (ETHRIntDetailsVOImpl)this.getETHRIntDetailsVO();
// IDVO.executeQuery();
// OAViewObject IDVO = (OAViewObject)findViewObject("ETHRIntDetailsVO");
IDVO.iniQuery(S1,S2,S3);
Row row = IDVO.first();
again I am not getting any data in the row??
Any idea if I am doing any thing wrong..
Please help urgently.
Thanks
Ashish -
Custom reports in R12 not returning any data
I'm seeing an issue of custom reports in R12 not returning any data. So far what I've been able to dig into is that the report query itself is referring to APPS synonyms that are secured under MOAC. What I am able to do is run the query in SQL Developer after having run mo_global.set_policy_context and I receive the data I'm looking for. This is not the case when running the report through the concurrent programs request.
Secondly, I've also configured the concurrent program request to run as single operating unit mode. This aided in fixing any issues with LOVs on the parameter form. However, still no results from the report itself. I've also searched around quite extensively and added a P_CONC_PROGRAM_ID user parameter in reports developer, as well as adding SRW.USER_EXIT('FND SRWINIT') to the before report trigger and SRW.USER_EXIT('FND SRWEXIT') to the after report trigger as well. No luck. I've also tried running mo_global.set_policy_context on the before report trigger and no such luck.
Has anyone seen similar issues with this and could shed some light? At this point, the workaround I would see is to just change the query to use respective all tables and match up against the orgid, but I'd rather not do that.I am facing exactly the same issue with 2 of my custom Reports in R12.1.3. We did our level best to find out the issue. It was always a hit and trial fix.
But the following were our observations and workarounds
0) The reports Conc Prog were in MOAC - Single mode. Both the reports had SRW INIT, EXIT and P_CONC_REQUEST_ID
1) The reports which caused the issues[NO data fetched for MOAC] had multiple Queries in the data model and one Query fetches data and the 2nd one doesnt. Both the queries when run from SQL developer after setting the org gave results.
Workaround for Report1
a) We deleted the data link connecting the 2 columns in both the queries and added a bind variable instead in the 2nd /child query to refer to the column in the parent query and linked the 2 groups.
Workaround for Report 2
a) In report 2 the queries were not linked to each other. Only one query used to return results and the 2nd one returned 0 rows. The workaround was to use the "where" conditions as lexical parameters after having set the value for the same in before report trigger.
Both the work around looks illogical. Still It worked..!
Thanks
Biju Radhakrishnan -
Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.
From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found -
Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly I got the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, that stated: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program fo fix. then I got the message, iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) I have had iTunes since I purchased the iphone in 2012. I have only updated the product since then until today when I did the uninstall ans reinstall as stated in above directions. I am not sure what is different now. please help
I had this problem as well but found the soultion on another post from turingtest2 - it worked for me:
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.
It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Apparently a recent update did not install correctly and we get a message: Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systen services, How do we fix this?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
Maybe you are looking for
-
4 of us on 1 Apple ID/icloud acct. How do I create 3 new ID's?
We have 4 members of our family on one Apple ID, and sharing one Cloud acct. How do I create 3 new ID's? Our cloud acct is full, and we need our own space! :-)
-
Unable to sort the content in KM Iview
Hi All, I am facing one problem in solving the sort issue. There is one KM iview which is using LinkListExplorer as Layout. This LinkListExplorer is using LinkListCollectionRenderer which doesent have the sort proerty. I am able to sort i
-
HT201269 The iPhone "Apps" Tab will not open in iTunes v11.1
I purchased the iPhone 5S yesterday and am running iOS 7.0.1. I restored my 5S from yesterday's backup of my 4S which was running iOS 6.1.2. The 5S restored fine but now when I open iTunes, click on the iPhone tab, I can open all the tabs with the
-
My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?
-
Most recent Samba breaks sharing?
Good Morning everyone, I -Syu'ed today and now I find that I can't connect to my mediaserver anymore from a Windows 7 machine. This has never been a problem in the past and I havn't changed my smb.conf. Can someone confirm that they can connect to th