Update jar file by removing existing files
hello,
is there a way to update a jar file by removing indicated files within the jar file ?
I saw that it is possible to update a jar file by adding files to it: jar uf jar-file input-file(s)
I want to avoid:
1)extracting the file
2) remove indicated files
3) compress again.
thank you !
>
I want to avoid:
1)extracting the file
2) remove indicated files
3) compress again.>If you don't want to do it, make Ant do it, and be happy (get on with your life, do fun things etc.).
Similar Messages
-
Software update is stuck at "Removing old files"
Last night Software update informed me there were a few things to update. (I believe Safari was in there as well as a couple of things I was not using)
No reboot was required, so I started the install.
My system started really slowing down and was painful after a while. I shecked and Software Update was "Installing 3 items" and "Removing old files" - this was about an hour after starting the update.
Well, that was about 16 hours ago and it is still in the same state and with the same message and the same spot on the status line.
I am reluctant yo force quite Software update as I do not want to cause instability.
Any ideas?
(Or is it OK to force quit when it is just at the "Removing old files" stage?)
This is on a MacBook ProYou have no choice but to force a reboot and see what happens.
-
Ugh this is so frustrating and I suspect it is an easy fix I am too tired to figure out.
I just got a new PC and installed Creative Cloud and Photoshop CC, logged in and launched Photoshop. It launches fine, no error messages or anything. The tutorial window pops up and I close it. Then if I try to create a new file (the option window comes up) nothing happens after I submit the options. I mean nothing. No error message, no crash, no file canvas nothing. If I try to open an existing file it loads Photoshop as if it is going to open the file and Photoshop loads without any error messages but no file, again nothing.
Please help.
I am so behind in my work lol.After three or four tries, it just started working - I didn't change any settings or anything. I was just showing my friend how it wouldn't work and bam it opened a file finally...
never seen this behavior before... -
Hey software does not respond when I open a new file or an existing file
Hey software does not respond when I open a new file or an existing file
Nobody can tell you anything without system info and other technical details.
Mylenium -
Progrem does not respond cs5- when I open a new file or an existing file
progrem does not respond cs5- when I open a new file or an existing file
Nobody can tell you anything without proper system info, error messages and possibly crash logs/ system logs.
Mylenium -
Resizing JPEG Files and overwrite existing files
I've got a folder with about 30 subfolders with JPEGs only. I need to resize all of them to a specific size and they must stay within the subfolder structure they currently reside in. I have selected all of the files (using the show files in subfolders menu setting) and have tried to Export so that the smaller files go back in the original folder and also "Overwrite WITHOUT WARNING". When I do this, LR3 will go through it's process, but will come up with a message like this one:
Is what I am seeking to accomplish not possible in Lightroom? Or is there another way to do this? I'm about ready to make a Photoshop Action to get this over with but wanted to see if LR can do what I need it to do.Thanks for the response. These are not original RAW images, but are images for a project I'm working on. I have all the original RAW files, but they are scattered throughout my library on different volumes. I had originally exported the RAWs into one JPEG folder, then sorted images into a bunch of different subfolders during the editing process. Some files still have camera names and some are renamed, so doing it over again by re-exporting and sorting to move in chunks is not an option. I simply want a way to overwrite the images without having to resort everything back into the different subfolders. Isn't that what the "Overwrite WITHOUT WARNING" should be for? I don't understand why it won't let me overwrite the images.
-
Batch files to remove certain files over a date
Hello,I'm trying to create a batch file that will copy certain files from a directory made up of several sub directories. I've used xcopy to move the files:xcopy /Main Directory\Sub Directory\*.pdf x\ipaddress\share
xcopy /Main Directory\Sub Directory\*.rtn x\ipaddress\share
xcopy /Main Diretcory\Sub Directory\*.prt x\ipaddress\sharepausehow would I edit this so that it only takes files that have been modified over 3 months ago?I also want to add some exclusion file extensions and sub directories, for this I added:xcopy /Main Directory\Sub Directory\\list-of-excluded-files.txtand within that .txt file ive got:\\Main Directory\Subdirectory\Folder Name
\\Main Directory\subdirectory\*.tncIs this the best way to do this? and would the exclusion command have to be the first on the list?Any help would be great, or could anyone point me in the...
This topic first appeared in the Spiceworks CommunityWSUS is filling up all my hard disk partition which is 200gbAlready tried running server cleanup wizard, unticking some products and classifications but still after removing files from wsus folder and restarting it it is filling up all hard disk partitionBelow are the settings I currently have :In products anad classifications I have selected:- Exchange Server 2013- office 2007- office 2013- widnows 7- windows 8.1 Dynamic update- windows 8.1- windows server 2003- windows server 2008 r2- Windows server manager - windows server update
-
Slideshow - How to insert music file between two existing files.
I have a lengthy slideshow with different music files dropped into the background (that is, they display behind the images when in Slideshow Split View). I need to insert an audio file between two of these background music files, but Aperture is not allowing it. Removing all of the music files (1 hour slideshow) and re-adding them is not an appealing option.
Certainly we should be able to rearrange (or insert) background music without have to remove all existing music and reapplying? Or, is this, in fact, not possible presently?IFF you legally own the tune, you may be able to do it, but using a computer and iTunes to sync the devices.
-
Writing to files - adding to existing file
hi,
i am trying to write some additional text to a file, how do i do this.
FileWriter fw=null;
PrintWriter pw=null;
try {
fw = new FileWriter ("c:\\javanash.txt");
pw = new PrintWriter(fw);
pw.println("pepper is at the door");
pw.close();
catch (IOException e) {System.out.println(e);}
that code will erase the old content and write new content.
any ideas how to add new text to it?ok, i have taken your new code but it is giving me an
error with the word 'boolean'.
i do not understand why a true or false statement is
meant to be there.a method( newbies call it function) is built like this...
access_level returntype name(ObjectType nameOfObject, ObjectType nameOfObject)
public void FileOutputStream(String text, boolean append)making....
how to use: FileOutputStream(String name, boolean append)
to use: FileOutputStream(yourString, true); -
Illustrator CS6 Hangs: New Files or Opening Existing Files
Date/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0Date/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0
Process: Adobe Illustrator [10493]
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Architecture: x86_64
UID: 501
Thread 0x37192 DispatchQueue 1
User stack:
10 ??? (in Adobe Illustrator) [0x100163358]
10 ??? (in Adobe Illustrator) [0x1006f8bb4]
10 ??? (in Adobe Illustrator) [0x100708de1]
10 ??? (in Adobe Illustrator) [0x100769a58]
10 exo::app::OS_AppBase::RunEventLoop() + 55 (in exo) [0x108e71747]
10 -[NSApplication run] + 470 (in AppKit) [0x7fff8b2589b9]
10 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135 (in AppKit) [0x7fff8b25c07d]
10 _DPSNextEvent + 2019 (in AppKit) [0x7fff8b25ccc9]
10 _NSHandleCarbonMenuEvent + 250 (in AppKit) [0x7fff8b2c71da]
10 _HandleMenuSelection2 + 580 (in HIToolbox) [0x7fff8e143592]
10 _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 600 (in HIToolbox) [0x7fff8e143fc9]
10 _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 101 (in HIToolbox) [0x7fff8e14c883]
10 SendMenuItemSelectedEvent + 253 (in HIToolbox) [0x7fff8e2825b5]
10 SendMenuCommandWithContextAndModifiers + 56 (in HIToolbox) [0x7fff8e23ae2d]
10 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueEventRef + 398 (in HIToolbox) [0x7fff8e1537b5]
10 SendEventToEventTarget + 76 (in HIToolbox) [0x7fff8e10d6db]
10 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14HandlerCall Rec + 446 (in HIToolbox) [0x7fff8e0f6840]
10 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1263 (in HIToolbox) [0x7fff8e0f7234]
10 NSSLMMenuEventHandler + 339 (in AppKit) [0x7fff8b3c69bb]
10 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 138 (in AppKit) [0x7fff8b57a6f9]
10 -[NSMenu _internalPerformActionForItemAtIndex:] + 38 (in AppKit) [0x7fff8b6ebb08]
10 -[DVAMacMenu performActionForItemAtIndex:] + 61 (in dvaui) [0x10862293d]
10 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 125 (in AppKit) [0x7fff8b44c536]
10 -[NSMenuItem _corePerformAction] + 399 (in AppKit) [0x7fff8b44c7ff]
10 -[NSApplication sendAction:to:from:] + 139 (in AppKit) [0x7fff8b35f8ca]
10 -[NSObject performSelector:withObject:] + 61 (in CoreFoundation) [0x7fff8fd1870d]
10 -[ExoMacApplication handleMenuCommand:] + 187 (in exo) [0x108e73e9b]
10 void dvacore::config::ExecuteTopLevelFunction<void>(boost::function0<void>, bool*) + 93 (in dvacore) [0x107ef497d]
10 void dvacore::config::ErrorManager::ExecuteFunctionWithTopLevelExceptionHandler<void>(boost::f unction0<void>, bool*) + 250 (in dvacore) [0x107ef0e9a]
10 ??? (in Adobe Illustrator) [0x10076bb5b]
10 int dvacore::config::ErrorManager::ExecuteFunction<void>(boost::function0<void>*, void*) + 123 (in dvacore) [0x107ef1e0b]
10 exo::app::OS_AppBase::DispatchMenuCommand(int) + 119 (in exo) [0x108e72417]
10 exo::uisupport::CommandHandlerBase::CallCommandChain(int) + 62 (in exo) [0x108ee7ffe]
10 exo::uisupport::CommandHandler::DoCallMyCommandChain(int) + 36 (in exo) [0x108ee85f4]
10 exo::uisupport::CommandHandler::HandleCommand(int) + 259 (in exo) [0x108ee85a3]
10 ??? (in Adobe Illustrator) [0x100769f14]
10 ??? (in Adobe Illustrator) [0x10048f9d3]
10 ??? (in Adobe Illustrator) [0x10047d66e]
10 ??? (in Adobe Illustrator) [0x10047af78]
10 ??? (in Adobe Illustrator) [0x10040e89d]
10 PluginMain + 343201 (in IllustratorUI) [0x1230dab91]
10 PluginMain + 9806 (in IllustratorUI) [0x12308953e]
10 dvaui::ui::OS_Dialog::RunModal() + 175 (in dvaui) [0x1085dd88f]
10 dvaui::ui::OS_Dialog::ModalLoop() + 177 (in dvaui) [0x1085ddbe1]
10 -[NSApplication runModalSession:] + 48 (in AppKit) [0x7fff8b509f4c]
10 -[NSApplication _realDoModalLoop:peek:] + 708 (in AppKit) [0x7fff8b510797]
10 -[ExoMacApplication sendEvent:] + 956 (in exo) [0x108e7310c]
10 -[DVAMacApplication sendEvent:] + 261 (in dvaui) [0x1085e56d5]
10 -[NSApplication sendEvent:] + 5593 (in AppKit) [0x7fff8b2c23a5]
10 -[NSWindow sendEvent:] + 6306 (in AppKit) [0x7fff8b328c98]
10 -[DVAMacContainerView mouseDown:] + 148 (in dvaui) [0x1085f5954]
10 void dvacore::config::ExecuteTopLevelFunction<void>(boost::function0<void>, bool*) + 93 (in dvacore) [0x107ef497d]
10 void dvacore::config::ErrorManager::ExecuteFunctionWithTopLevelExceptionHandler<void>(boost::f unction0<void>, bool*) + 250 (in dvacore) [0x107ef0e9a]
10 ??? (in Adobe Illustrator) [0x10076bb5b]
10 int dvacore::config::ErrorManager::ExecuteFunction<void>(boost::function0<void>*, void*) + 123 (in dvacore) [0x107ef1e0b]
10 dvaui::ui::OS_View::UI_HandlePlatformEvent(NSEvent*) + 65 (in dvaui) [0x1085f2131]
10 dvaui::ui::OS_View::UI_HandleOSEvent(dvaui::ui::OS_Event*) + 31 (in dvaui) [0x1085e66af]
10 dvaui::ui::OS_View::UI_DispatchEvent(dvaui::ui::OS_Event*) + 268 (in dvaui) [0x1085fb2fc]
10 dvaui::ui::OS_View::UI_DispatchPlatformMouseClickEvent(dvaui::ui::OS_Event const&) + 321 (in dvaui) [0x1085f2491]
10 dvaui::ui::OS_View::UI_DispatchPlatformMouseEvent(dvaui::ui::MouseEvent const&, bool) + 296 (in dvaui) [0x1085fa318]
10 dvaui::ui::UI_Node::UI_DispatchMouseEvent(dvaui::ui::MouseEvent const&, bool) + 68 (in dvaui) [0x108566804]
10 dvaui::ui::UI_Node::UI_DispatchMouseEventToTarget(dvaui::ui::UI_Node*, dvaui::ui::MouseEvent const&, bool) + 175 (in dvaui) [0x10856673f]
10 dvaui::ui::UI_Node::UI_DispatchMouseEventTowardsLeaf(dvaui::ui::MouseEvent const&, bool) + 86 (in dvaui) [0x108566636]
10 std::pair<bool, dvaui::ui::UI_Node*> dvaui::ui::UI_Node::UI_DispatchMouseEventTowardsLeafT<dvaui::ui::UI_Node::DispatchMouseEv ent>(dvaui::ui::UI_Node::DispatchMouseEvent&, dvacore::geom::PointT<float> const&, bool) + 177 (in dvaui) [0x10856fed1]
10 std::pair<bool, dvaui::ui::UI_Node*> dvaui::ui::UI_Node::UI_DispatchMouseEventTowardsLeafT<dvaui::ui::UI_Node::DispatchMouseEv ent>(dvaui::ui::UI_Node::DispatchMouseEvent&, dvacore::geom::PointT<float> const&, bool) + 177 (in dvaui) [0x10856fed1]
10 std::pair<bool, dvaui::ui::UI_Node*> dvaui::ui::UI_Node::UI_DispatchMouseEventTowardsLeafT<dvaui::ui::UI_Node::DispatchMouseEv ent>(dvaui::ui::UI_Node::DispatchMouseEvent&, dvacore::geom::PointT<float> const&, bool) + 177 (in dvaui) [0x10856fed1]
10 std::pair<bool, dvaui::ui::UI_Node*> dvaui::ui::UI_Node::UI_DispatchMouseEventTowardsLeafT<dvaui::ui::UI_Node::DispatchMouseEv ent>(dvaui::ui::UI_Node::DispatchMouseEvent&, dvacore::geom::PointT<float> const&, bool) + 177 (in dvaui) [0x10856fed1]
10 std::pair<bool, dvaui::ui::UI_Node*> dvaui::ui::UI_Node::UI_DispatchMouseEventTowardsLeafT<dvaui::ui::UI_Node::DispatchMouseEv ent>(dvaui::ui::UI_Node::DispatchMouseEvent&, dvacore::geom::PointT<float> const&, bool) + 124 (in dvaui) [0x10856fe9c]
10 dvaui::ui::UI_Node::DispatchMouseEvent::operator()(dvaui::ui::UI_Node*, dvaui::ui::UI_Node*, dvacore::geom::PointT<float> const&) const + 194 (in dvaui) [0x1085663f2]
10 dvaui::ui::UI_Node::UI_DispatchMouseEventToLeaf(dvaui::ui::UI_Node*, dvaui::ui::UI_Node*, dvaui::ui::MouseEvent const&) + 71 (in dvaui) [0x108562af7]
10 dvaui::controls::BasicFlyoutMenuItem::UI_DoMouseEvent(dvaui::ui::UI_Node*, dvaui::ui::MouseEvent const&) + 240 (in dvaui) [0x108347c40]
10 dvaui::controls::UI_IconFlyoutMenu::SelectItem(int) + 431 (in dvaui) [0x1083479ff]
10 boost::detail::function::void_function_obj_invoker1<dvaui::ui::MessageFunctionAdapter<dva ui::ui::MessageT<dvaui::ui::UI_Node>, dvaui::controls::IconFlyoutMenuChangedMessage, boost::function1<void, dvaui::controls::IconFlyoutMenuChangedMessage*> >, void, dvaui::ui::MessageT<dvaui::ui::UI_Node>*>::invoke(boost::detail::function::function_buffe r&, dvaui::ui::MessageT<dvaui::ui::UI_Node>*) + 209 (in dvaadameve) [0x107316741]
10 dvaui::controls::UI_Popup::FlyoutMenuChanged(dvaui::controls::IconFlyoutMenuChangedMessag e*) + 202 (in dvaui) [0x1083d311a]
10 dvaui::controls::UI_ControlView::SendValueChangedMessage() + 52 (in dvaui) [0x10830f654]
10 void dvaui::ui::SendMessagesT<dvacore::utility::SharedFunctions<boost::shared_ptr<boost::funct ion<void ()(dvaui::ui::MessageT<dvaui::ui::UI_Node>*)> > >, dvaui::ui::MessageT<dvaui::ui::UI_Node> >(dvacore::utility::SharedFunctions<boost::shared_ptr<boost::function<void ()(dvaui::ui::MessageT<dvaui::ui::UI_Node>*)> > > const&, dvaui::ui::MessageT<dvaui::ui::UI_Node>*) + 63 (in dvaui) [0x10831390f]
10 PluginMain + 136593 (in IllustratorUI) [0x1230a8481]
10 PluginMain + 577600 (in IllustratorUI) [0x123113f30]
10 ??? (in Adobe Illustrator) [0x10046ca2b]
10 ??? (in Adobe Illustrator) [0x10046a9f2]
10 ??? (in Adobe Illustrator) [0x1003e79e5]
10 ??? (in Adobe Illustrator) [0x100accfcf]
10 ??? (in Adobe Illustrator) [0x100ac3c61]
10 ??? (in Adobe Illustrator) [0x1009930e0]
10 ??? (in Adobe Illustrator) [0x100966e49]
10 ??? (in Adobe Illustrator) [0x100a32e45]
10 ??? (in Adobe Illustrator) [0x10044ca0e]
10 ??? (in Adobe Illustrator) [0x10044c7d3]
10 ??? (in Adobe Illustrator) [0x100529674]
10 ??? (in Adobe Illustrator) [0x1005295c0]
10 ??? (in Adobe Illustrator) [0x100528bab]
10 ??? (in Adobe Illustrator) [0x100528579]
10 ??? (in Adobe Illustrator) [0x1005240a5]
10 ??? (in Adobe Illustrator) [0x10054afed]
10 ??? (in Adobe Illustrator) [0x100549ee3]
10 ??? (in Adobe Illustrator) [0x10054968f]
10 ??? (in Adobe Illustrator) [0x10055f9fb]
10 ??? (in Adobe Illustrator) [0x100b32a8f]
10 ??? (in Adobe Illustrator) [0x1009674e2]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 13900 (in Adobe Illustrator) [0x100c951ac]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 1228 (in Adobe Illustrator) [0x100c9202c]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 24282 (in Adobe Illustrator) [0x100c97a3a]
10 ??? (in Adobe Illustrator) [0x10097b30b]
10 ??? (in Adobe Illustrator) [0x1009b9a60]
10 ??? (in Adobe Illustrator) [0x1009b6665]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 13900 (in Adobe Illustrator) [0x100c951ac]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 1228 (in Adobe Illustrator) [0x100c9202c]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 24282 (in Adobe Illustrator) [0x100c97a3a]
10 PluginMain + 162 (in FuzzyEffect) [0x116fff582]
10 PluginMain + 10121 (in FuzzyEffect) [0x117001c69]
10 PluginMain + 29088 (in FuzzyEffect) [0x117006680]
10 PluginMain + 21032 (in FuzzyEffect) [0x117004708]
10 PluginMain + 16390 (in FuzzyEffect) [0x1170034e6]
10 PluginMain + 20169 (in DiffusionRasterSuite) [0x1112b2f99]
10 PluginMain + 26658 (in Rasterize) [0x111cd65d2]
10 PluginMain + 15450 (in Rasterize) [0x111cd3a0a]
10 ??? (in Adobe Illustrator) [0x1009e77d5]
10 ??? (in Adobe Illustrator) [0x100a03d54]
10 ??? (in Adobe Illustrator) [0x10084cd25]
10 ??? (in Adobe Illustrator) [0x100a05d1b]
10 ??? (in Adobe Illustrator) [0x100a04bd4]
10 ??? (in Adobe Illustrator) [0x1009cf0ed]
10 ??? (in Adobe Illustrator) [0x100a97385]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 15393 (in Adobe Illustrator) [0x100c95781]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 13900 (in Adobe Illustrator) [0x100c951ac]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 1228 (in Adobe Illustrator) [0x100c9202c]
10 std::_Rb_tree<SPSUAS, std::pair<SPSUAS const, int>, std::_Select1st<std::pair<SPSUAS const, int> >, std::less<SPSUAS>, std::allocator<std::pair<SPSUAS const, int> > >::erase(SPSUAS const&) + 24282 (in Adobe Illustrator) [0x100c97a3a]
10 PluginMain + 280 (in BNPlugin) [0x115c0c7e8]
10 PluginMain + 29301 (in BNPlugin) [0x115c13945]
10 PluginMain + 9949 (in BNPlugin) [0x115c0edad]
10 PluginMain + 36051 (in BNPlugin) [0x115c153a3]
10 PSLShutdown + 388 (in AdobePSL) [0x1042c58f4]
10 PSLGetPreferences + 11343 (in AdobePSL) [0x1042c540f]
10 PSLCreateStringUTF8 + 460233 (in AdobePSL) [0x104348ce9]
10 PSLCreateStringUTF8 + 464882 (in AdobePSL) [0x104349f12]
10 PSLSetImageGuides + 1436569 (in AdobePSL) [0x1044b0959]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 3318833 (in AdobePSL) [0x104036ae1]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 3354840 (in AdobePSL) [0x10403f788]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 3353884 (in AdobePSL) [0x10403f3cc]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 3353361 (in AdobePSL) [0x10403f1c1]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 3343747 (in AdobePSL) [0x10403cc33]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 3296307 (in AdobePSL) [0x1040312e3]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 3290276 (in AdobePSL) [0x10402fb54]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 3868882 (in AdobePSL) [0x1040bcf82]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 3868736 (in AdobePSL) [0x1040bcef0]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 5514742 (in AdobePSL) [0x10424eca6]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 5514524 (in AdobePSL) [0x10424ebcc]
10 ??? (in AdobePSL) [0x103cf6dc3]
10 ??? (in AdobePSL) [0x103cf6cbb]
10 ??? (in AdobePSL) [0x103cf6b66]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 569177 (in AdobePSL) [0x103d97609]
10 PSSLO::ConstAutoResource<PSSLO::StyleSheet>::ConstAutoResource() + 580792 (in AdobePSL) [0x103d9a368]
-
Illustrator Crashes when creating new file and opening a file
Every time I try to create a new file, or even open an existing file Illustrator crashes. I have re-installed illustrator...no luck. I have tried running Illustrator while holding SHIFT...no luck. I am using windows 7, and have no crazy drivers that I believe need to be updated.
Thank you for your help!
-PatrickHave been Googling like always after Illustrator CC crashes with these specific symptoms (Opening fine, New file of Opening existing file crashes).
All other threads had no working solution for me and the symptoms seemed little different - Opening the program and keeping it open without opening or creating a file was no problem.
This was the well-appreciated solution that did the trick for me.
Re: Illustrator CC 17.1 Crashing on New File or Open File (Win 7) works under a different user?
(In my case I think my default printer had been changed in the background by using a VPN connection this morning which I hardly use ever. Never had been thinking in that direction of course.)
Good luck to you all. -
I have recently purchased a new desktop under WIN 7 as well as Adobe Creative Suite CS6.
My first internal hard disk is 2 TB, the second one installed is from my old PC, 250 GB.
I am getting this error when trying to save a file over an existing file using the “Save” command.
The message is wrong, because the file name IS valid.
This error is persistent.
This error does not occur when doing the same action on my second internal hard disk.
This error happens on files larger than about 1MB in weight.
What happens is that the original file over which I try to do the ”Save” command gets corrupted and lost.
If I don't use the “Save as” command to save my work under a different name, my work is lost.
The same problem occurs with both PS CS6 versions, 64 Bit and 32 Bit.
I am very disappointed and annoyed with this happening.
Any idea what is going on here?ok ...
I think I have resolved this.
I forgot to mention that I have Sugarsync over that file structure.
However, I do not know if Sugarsync has anything to do with the error.
I copied the whole folder structure under a newly created folder, and I am no longer getting the error.
Thanks
Milan -
Error in updating jar file in windows
Hi...
I am updating a jar file using Runtime.exec() by passing a batch file in it.
While updating the jar file I am getting error like this:
java.io.IOException: Error in writing existing jar file
at sun.tools.jar.Main.run(Main.java:198)
at sun.tools.jar.Main.main(Main.java:1022)
The batch file (upgradejar.bat) is like this:
echo IQuinox NextGen Upgrade Management
cd shared/upgrade/upgrade/IQfullversion/classes
jar uf ../../../../../../jars/ng.jar ./qlc/postmaster/PMStartup.class ./qlc/postmaster/wpm/admin/scheduler/others/OthersScheduleServlet.class
The java code is like this:
Process p=Runtime.getRuntime.exec( "cmd /C start "+upgradejar.bat);
if (p.waitFor() != 0) {
System.err.println("exit value = " +p.exitValue());
Thanks.I am using the jar file in my program. the jar file name is " _ng.jar_ " which is mentioned in the batch file.
The batch file is here :
echo IQuinox NextGen Upgrade Management
cd shared/upgrade/upgrade/IQfullversion/classes
jar uf ../../../../../../jars/ng.jar ./qlc/postmaster/PMStartup.class ./qlc/postmaster/wpm/admin/scheduler/others/OthersScheduleServlet.class -
Error While Opening an Updated JAR file
Frnds,
I have some problem with a JAR file update. Seek ur help in this regard.Here goes my problem.
I need to update a jar file ( need to replace a single .class file with a new one ). I updated the JAR file using ' jar uf ' command and it was successfull.. I removed the old JAR file and replaced it with the updated JAR file. But when i tried to invoke the JAR application using Java we start iam unable to open the applicaiton. But when i replace this upadted JAR file with the old JAR file ( using the backup) the application loads correctly.
The application is hposted in Apcahe web server. Is a server restart required after deploying the updated JAR file or is this porblem due to some other reasons.
Thanks in advance.
Regards,
Bala.It appears that the New Report .vi only accepts the .xlt template format and not .xltx as one would commonly expect. I am currently working to determine for sure that this is the case, but it does run (mostly) properly on my end if you make that change.
When I say mostly, I mean there are a couple other minor issues with your code. First the first frame of your sequence structure is really accomplishing anything. If your intent is to open a reference to the excel template, there is no need because the New Report .vi does it automatically.
Second, you will need a file path of some sort wired in to your Save Report to File .vi or else you will get a different error message after fixing the .xlt issue. I am currently researching whether this should be marked as a required terminal instead of recommended so that it not being wired would result in a broken run arrow rather than an error.
Let me know if these suggestions resolve your issue, or if I can provide further input on what you are doing in your first frame. I will touch base again once I determine whether these are expected behaviors or bugs.
Christopher S. | Applications Engineer
Certified LabVIEW Developer
"If in doubt... flat out." - Colin McRae -
Updated JAR files in j2ee/home/lib
We are developing and deploying j2ee applications to a 9.0.2.3 9iAS server. We have a framework.jar file that we have a number of applications in two OC4J instances (home and portal) that need to use this jar file. As a result, we place the jar file in the j2ee/home/lib directory since this could be seen by all applications. My question comes in when we try and update this jar file. We seem to experience problems when moving a new framework.jar file into the directory. We mainly notice this issue in our EM Website. We begin to get the following error in the EM Website after we move an updated jar file into the directory:
Servlet error: Renderer failed: java.lang.InternalError: jzentry == 0
I've seen this error before and it seems to link back to a problem with jar files. If I remove the new jar file the error disappears. We are eventually able to get the jar file in, but only after restarting the whole mid-tier. Is this normal? Should we have to restart the server everytime we update the jar file? If so, what would be the best way to implement the new jar files? Stop mid-tier, move new file in and restart??
Would you recommend a different location for this jar file?? Our biggest concern is that we only want to deploy this jar file one time and have all applications that need it find it. Thanks in advance for any input you might have.
BethLibraries loaded from the j2ee/home/lib directory are opened and loaded at the J2EE container level. So they are accessed from the very start of the server, to the point where it is stopped.
Therefore if you modify a class library which has already been loaded, you may run into file locking related issues (which will be OS dependent, Windows for example probably won't even let you overwrite the file) so that is what you are likely to be seeing.
JAR files loaded at the J2EE container level aren't really suitable for dynamic updating -- the classes can be referenced in a multitude of other classloaders.
As you have seen, replacing a J2EE container level class file, then a restart will be required along the lines of what you have written.
Stop mid-tier, move new file in and restart?? cheers
-steve-
Maybe you are looking for
-
Hi, I have to develop a sales order smartform in CRM .I dont know how to customise it and to populate additional data in it , as in CRM there are classes and methods instead of driver programs that could be modified . Kindly help me out. Thanks a
-
Changing App Availability Date To A Later Time After Aproval
If I get an app approved on July 30, 2013 and about 100 people buy it for 99 cents. Can I change the availability date to a later date and will they have to pay for it again or will the app still be saved on their account.
-
Can't connect to apple server update anyone experiencing same thing?
can't connect to apple server update iOS 5.1 anyone experiencing same thing?
-
I'm a first time user of apple support. Have attempted to set up headset to use Rosetta stone.
-
Mail crashing immediately after opening
My mail app is crashing immediately after I open it. Has been happening since yesterday and I recently updated to the new OS X 10.9.5 Here is the report from the console (deleting the part that I read in other posts that was anonymous) Process: