Updater Reminds me Relentlessly to Update to the Version I ALREADY HAVE
Reader 11.0.10
Macbook Pro / Yosemite OSX 10.10.1
I keep getting these reminders to update. I check and it's always for the same version I have already.
As far as I can tell the app works properly otherwise.
What is up? How do you make this stop?
There are a lot of fake update sites and apps. So far they seem to have mostly targeted Windows, but maybe Macs are next. What do these update prompts look like (screen shot would be best - but you can't email it!)
Similar Messages
-
Why does Flash Player keep sending me notifications to update to the version I already have?
Why does Flash Player keep sending me notifications to update to the version I already have? The result is always an error message telling me that the version is already running. (Desktop Computer; Windows Vista OS; Firefox; Adobe Flash Version 11.8.800.94)
I don't know; can you post a screenshot of such a notification?
Did you update both ActiveX (for Internet Explorer) and plugin (for Firefox)? -
The last few updates and the version 5 download have continued to run without finishing.
hello, java is not the same as javascript (the later runs in the browser without any plugins necessary).
in case websites don't get rendered correctly please refer to the following support article, which contains the most common solutions: [[Websites look wrong or appear differently than they should]]
for connection problems see [[Firefox can't load websites but other browsers can]].
from the system information you've submitted it appears that the java plugin by oracle is already present on your system (but not the latest version). if you're having problems downloading java update 7 from java.com you can also use the inbuilt updater for java, that is accessible in the windows control panel (see [http://www.java.com/en/download/help/java_update.xml]). -
When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id, I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.
Finally got through to tech support and found someone who seemed to know what was going on, he walked me through and using appleid.applesupport got me to a point where i could get a new password for the apple id that kept showing up.
I think you were on the right trail and I want to say thanks for your help. Much appreciated
ccl43 -
I currently have iTunes version 7 on my computer and need to upgrade to version 10 to sync my new nano iPod. When I tried the "check for updates" under the version 7 "help" menu, it said it could not contact the update server. I am afraid if I just download version 10 from the website, it will wipe out my music library. What should I do to upgrade?
Back up your music and install from the website. You probably won't need to do this, but if your library is erased, restore it from the backup.
(59049) -
sorry but I think this wrong, I know that in Colombia there and two of the three operators already have 4G/LTE networks, what happens is that the iPhone should be expected to send the update software for computers that have this tercnologia activate them, that my Iphone or receiving 5 supports 4G LTE,
Thank you for your attentionApple needs to test the carrier if they offer LTE as expected.
If your country/carrier is not on the list then there's no LTE on your iPhone.
http://www.apple.com/iphone/LTE/
It's between the your carrier and Apple. There's nothing you can do except feedback to Apple:
http://www.apple.com/feedback/iphone.html -
Hi,
i just updated to the latest aperture, i have projects previously saved on a drive (in the old version) that now won't load... how do i update them?But, unless I missed something, you are doing the repair with Aperture 3.5 so if 3.5 can't open an earlier library before doing the upgrade then unless I'm missing something the library will be upgraded before the repair is run, no?
OT:
You got me there, Frank - I wondered about the same thing, but Aperture is behaving differently, when upgrading a library, depending on if you are launching into the First Aid Tools or not.
I repeated my experiments, to explore this difference:
I restored an Aperture 3.4.3 library and launched the First Aid Tools:
Apertur went directly into First Aid Mode without first asking to upgrade.
Then "Repair" asked to be allowed to upgrade the library as you predicted.
During the upgrade "Aperture"showed "Rebuilding", not "Repairing" or "upgrading".
Second experiment: When I only double-click the 3.4.3 library instead of repairing, the upgrade alert is very different:
It takes a shorter time and does not show "rebuilding".
I am quite certain, that Aperture will use a different upgrade prodecure, when launched into the First Aid panel for repairing or rebuilding. -
can somebody help me please?? if i update to the new version of itunes, will it delete the music i already have??
No it will not.
The music is yours on your drive, only you, or malware or a drive crash, can delete that data.
pLeAsE make backups of your valuable data.
Apple makes it's easy in iTunes, File > Library > Backup to Disk Feed it DVD-R's label and data, or use a external drive.
Apple doesn't reinssue downloads. The music is yours you bought it. -
i downloaded Yosemite and now I cannot open CS 5.5 Production Premium at all, I receive the message that i need to install the legacy Java SE6 runtime. I am running Java 8 Update 25 (the latest). I have uninstalled and reinstalled CS5.5 Prod Prem already again so please don't suggest this. What do I do?
Try to install java from below link and try once
Java for OS X 2014-001 -
I already updated! The version iOS 6.0.1 without include me the McTube or MxTube. The McTube free I was using, capacity for 10 videos download only. I need McTube Pro free! What's your Idea?
I already updated! The version iOS 6.0.1 without include me the McTube or MxTube. The McTube free I was using, capacity for 10 videos download only. I need McTube Pro free! What's your Idea?
-
Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
HT1222 Is it possible for me to update to new version if i have a gevey sim?
Is it possible for me to update to new version if i have a gevey sim?
My Airport Card Info. is
Wireless Card Firmware Version: 9.52
can you teach me how to connect in a WPA personal security?? Please??
Because our router only has WPA and WPA2 and neither of the settings, after i put in the password, would connect to the internet... It would only gives me an error message "the wireless network (name of the network) does not support the requested encryption method".
I am also trying to connect this Ibook into the personal hotspot feature of Iphone 4s but it is still not recoginizing the security settings. It will give me the same error....
Thanks for the message anyways...
So what is the next upgrade for OS X 10.4.11?? -
I have the Iphone 4s. If I try to download the iOS 7, will this affect any of the apps I already have. (I have an app with a lot of my baby's information that I don't want to lose). Or is iOS 8 better to download?
anypats wrote:
My biggest suggestion would be to check and make sure that the app works with iOS 8. If their app is not compatible, then there is a possibility that the app will crash every time you open it or some other way that makes the app unusable and then you would be unable to access that data. As long as the app is compatible with iOS 8 then updating your OS shouldn't cause you to lose any of the information within the app. As others are suggested, make sure you have a backup but just note that once you update to iOS 8 you cannot revert back to an older version. Find out if your app has any way to export the information to another format that you can save and access via a computer before updating.
And what app have you seen that works in iOS 7 that doesn't work in iOS 8? -
Hi, so I got my new computer loaded up with iTunes and I want to be able to move my music from my old iPod to my new iTunes library without losing any of the music I already have placed on the iPod. How would I do this? And please I'm not too savvy with the new iTunes layout and such so if you could make this easy in layman's terms that would be great.
Welcome to Apple Support Communities
If you purchased all songs in the iTunes Store, plug your iPod to your Mac or PC and iTunes will ask you to transfer purchases.
If you didn't purchase any song or you have non-purchased songs from the iTunes Store, you have to use an application to transfer the songs to iTunes. Here is a list of applications you can use for that > https://discussions.apple.com/message/11319208#11319208 -
How do I show my iCloud purchases in iTunes, but prevent it from showing duplicates of the songs I already have on my computer? There are duplicates of essentially everything!
I would like to show my available songs that I could download if I want, however the ones I've already downloaded to my computer are showing up still, which results in duplicates of everything (one on my computer, one in the cloud)No.
Are the photos in an iTunes backup? If so then:
- You can restore another iPod touch, iPhne or iPad from that backup
- Extract the photos from that backup by
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
Otherwise maybe a data recovery company can help. Not cheap.
Maybe you are looking for
-
Snow Leopard's Address Book now Requires Full Name to find a Contact
In all previous versions of Address Book, the user could simply type 'T' to instantly go to contacts with last names that start with 'T' (and businesses that start with 'T'). In Snow Leopard, Address Book can no longer search with one letter the way
-
Porting a Processing (32bit) library from Windows to Mac (64bit)
Some months ago I developed a library in Windows for Processing (http://code.google.com/p/touchatag-processing/). It basically allows users to work with touchatag RFID readers and tags on the Processing environment. For the last couple of days I've b
-
ME21N User Exit to automatically display the print preview
Hi All Does anyone know of way to invoke the Purchase Order Print Preview Option <u>automatically</u> once the user selects the save button as part of the ME21N transaction ? This is required so that the end user must perform a visual check on the PO
-
How can I play Spotify through 3G but without downloading music to my phone?
I have an iphone that does not have any capacity to download my music files. I have tried, unsuccessfully, to get itunes to play through the icloud and wondered if, by purchasing Spotify Premium, I could play all of my music through Spotfiy when I do
-
How do I upgrade from FF 3.6 to FF 6 with Mac OS 10.6.8 ?
I am trying to upgrade to FF 6 so I can use 1Password. When I attempt to move the dmg file to applications I get an error saying, "This operation can't be completed because the item "libsmime3.dylib" is in use". I have searched computer and can't fin