Updating Infotype 0025 from acustom table....serious problem

Hi,
   I'm having a requirement to update Infotype0025 from a custom table.
     Does any REPORT exist already to update Infotype 25 or others from a custom table following time constraint 1 delimiting the older record and creating the new one from the Appraisal date to '12/31/9999'?
   Or any such scenarios faced by experts ?
Regards,
Jyoti

Hi,
You have to go for a Custom Z-report & use FM
<b>"HR_INFOTYPE_OPERATION'</b>.
Hope this helps.
Thanks,
Sarika.

Similar Messages

How to update multiple columns from different tables using cursor.

Hi,
i have two tables test1 and test2. i want to udpate the column(DEPT_DSCR) of both the tables TEST1 and TEST2 using select for update and current of...using cursor.
I have a code written as follows :
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
     LOOP
          FETCH C1 INTO v_mydept1,v_mydept2;
          EXIT WHEN C1%NOTFOUND;
          UPDATE TEST2 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
          UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
     END LOOP;
     COMMIT;
END;
The above code when run says that it runs successfully. But it does not updates the desired columns[DEPT_DSCR].
It only works when we want to update single or multiple columns of same table...i.e. by providing these columns after "FOR UPDATE OF"
I am not sure what is the exact problem when we want to update multiple columns of different tables.
Can anyone help me on this ?

oops my mistake.....typo mistake...it should have been as follows --
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
Now here is the upated PL/SQL code where we are trying to update columns of different tables --
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
LOOP
FETCH C1 INTO v_mydept1,v_mydept2;
EXIT WHEN C1%NOTFOUND;
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
END LOOP;
COMMIT;
END;
Please let us know why it is not updating by using using CURRENT OF

Update On data from multiple Tables

How can i update data from multiple tables(Using a Join)
using a single update statement.

Hii
Suppose i have following tables
create table emp_mas(empno number primary key,name varchar2(30));
create table emp_grad(empno number primary key,grade varchar2(1));
SQL> select * from emp_grad;
EMPNO G
100 A
101 A
102 B
SQL> select * from emp_mas;
EMPNO NAME
100 GREG
101 THOMAS
102 SAM
I would like to update information of employee 'GREG' Using a single update statement as
UPDATE (SELECT E.EMPNO,E.NAME,G.GRADE FROM EMP_MAS E,EMP_GRAD G WHERE E.EMPNO=G.EMPNO) J
SET J.NAME='GREG THOMAS',J.GRADE='B' WHERE EMPNO=100
Then i am getting Error message like this.
ERROR at line 2:
ORA-01776: cannot modify more than one base table through a join view
How can i achieve the result

Table control from internal table giving problem.

HI ALL,
I am creating a table control using wizard from internal table in the program when i give work area it gives this error "The table work area G_TABC_WA does not exist or is not a structure"
I have declared internal table and work like this.
TYPES: BEGIN OF T_TABC,
         OPTID LIKE ZHRPMT_TRNSAC-OPTID,
         STGID LIKE ZHRPMT_TRNSAC-STGID,
         TETID LIKE ZHRPMT_TRNSAC-TETID,
         REQSR LIKE ZHRPMT_TRNSAC-REQSR,
         MUNIT LIKE ZHRPMT_TRNSAC-MUNIT,
       END OF T_TABC.
DATA:     G_TABC_ITAB   TYPE T_TABC OCCURS 0,
               G_TABC_WA     TYPE T_TABC. "work area
why it is giving this error and how to correct this.
thanks.

Hay
Hello there is very small mistake
TYPES: BEGIN OF t_tabc,
optid TYPE zhrpmt_trnsac-optid,
stgid TYPE zhrpmt_trnsac-stgid,
tetid TYPE zhrpmt_trnsac-tetid,
reqsr TYPE zhrpmt_trnsac-reqsr,
munit TYPE zhrpmt_trnsac-munit,
END OF t_tabc.
DATA: g_tabc_itab TYPE TABLE OF t_tabc ,
g_tabc_wa LIKE t_tabc. "work area
**Please reward suitable points***
With Regards
Navin Khedikar

Updating a column from other table

Hi all,
I have a simple update query problem. I have four tables
activist(activist_id,first_name,last_name,c_state),
membership(activist_id,g_n_id),
group_network(g_n_id,g_n_type_id),
school_grop_det(g_n_id,state). For some records in activist table the c_state column is null, i want to update that column with state column of school_group_det table.
Here is the query for the states which are null
select distinct a.activist_id,a.first_name,a.last_name,
a.c_state,sd.state from activist a,membership m,
group_network g,school_group_det sd where
a.activist_id=m.activist_id and g.g_n_id=m.g_n_id and
g.g_n_id=sd.g_N_id and a.c_state is null and g.g_n_type_id='1001'
order by a.activist_id
I got the activist_id,first_name,last_name,c_state from activist and state from school_group_det. now i as i told you want to update the c_state with state column of school_group_Det table.
Pleae any one help me
Thanks
Srinivas

For ur query the reply whay u have got is correct one. For further quries similar to one u had u can download a tool named TOAD (Tools for Oracle Application Developer) from quest site (www.quest.com). Install it a proceed.
Do let me know how and what u feek about TOAD.

I need insert /update/modify ztable from internal table or work area

I have one simple problem.
TYPES: BEGIN OF t_account,
        acc_no          LIKE zztaccountheader-acc_no,
        cust_id         LIKE zztaccountheader-cust_id,
        acc_type        LIKE zztaccountheader-acc_type,
        od_option       LIKE zztaccountheader-od_option,
        od_limit        LIKE zztaccountheader-od_limit,
        od_issue_date   LIKE zztaccountheader-od_issue_date,
        END OF t_account.
data: lwa_account TYPE t_account,
     li_account TYPE STANDARD TABLE OF t_account,
bu scerrin i am inputing data :
i want modify updare or insert record into ztable by work area i put following thing
MOVE : zztaccountheader-acc_no        TO lwa_account-acc_no,
           zztcustomer-cust_id            TO lwa_account-cust_id,
           zztaccountheader-acc_type      TO lwa_account-acc_type,
           zztaccountheader-od_option     TO lwa_account-od_option,
           zztaccountheader-od_limit      TO lwa_account-od_limit,
           zztaccountheader-od_issue_date TO lwa_account-od_issue_date.
    INSERT   zztaccountheader CLIENT SPECIFIED FROM lwa_account .
    CLEAR lwa_account.
ENDIF.
i am etting error
The type of the database table and work area (or internal table)
"LWA_ACCOUNT" are not Unicode convertible.
please solve it

hi,
decalre like this.
tables : zztaccountheader.
data : t_account like zztaccountheader occurs 0 with header line.
data: lwa_account TYPE t_account,
li_account TYPE STANDARD TABLE OF t_account,
MOVE : zztaccountheader-acc_no TO lwa_account-acc_no,
zztcustomer-cust_id TO lwa_account-cust_id,
zztaccountheader-acc_type TO lwa_account-acc_type,
zztaccountheader-od_option TO lwa_account-od_option,
zztaccountheader-od_limit TO lwa_account-od_limit,
zztaccountheader-od_issue_date TO lwa_account-od_issue_date.
INSERT zztaccountheader CLIENT SPECIFIED FROM lwa_account .
CLEAR lwa_account.
ENDIF.
rgss
anver
if hlped mark points

Update ztable from internal table

I want to update the Ztable from internal table datas.
what is the syntax to update.
Its urgent send with coding example is better

Hi
PARAMETERS: p_carrid TYPE sflight-carrid,
            percent(1) TYPE p DECIMALS 0.
DATA sflight_tab TYPE TABLE OF sflight.
FIELD-SYMBOLS <sflight> TYPE sflight.
SELECT *
       FROM sflight
       INTO TABLE sflight_tab
       WHERE carrid = p_carrid AND
             fldate = sy-datum.
IF sy-subrc = 0.
LOOP AT sflight_tab ASSIGNING <sflight>.
    <sflight>-price =
      <sflight>-price * ( 1 - percent / 100 ).
ENDLOOP.
ENDIF.
<b>UPDATE sflight FROM TABLE sflight_tab.</b>
Thanks
Vijay
PLZ reward points if helpful

Update ztable from database table directly

hi all,
can u tell me the possible ways to update a ztable from database table directly.
i mean is there anyway to update ztable whenever entry is created in database table .
i dont want to update using insert,modify statements.
points will be rewarded to all hlpful answers.

A slightly dirty solution:
Use SAP functions for reading from CDHEADER and CDPOS tables [with enough filters such that you extract minimum records possible] to read changes to MARA table fields since last run of your program. Use this information to update your ZTABLE. I would recommend having a table maintainance generator on ZTABLE. The actual update should be by a BDC by calling transaction SM30 for ZTABLE maintainance. Now the program may be set up as a batch job running 1ce an hour. You get updates to the extent of 1 hour latency.
Alternatively, you may look if an opportunistic BADI / user Exit is there alongside MM01/02 transactions - assuming the latter are the only ones updating MARA. In this BADI you may write the code to update ZTABLE- again, look to do it by BDC call transaction sm30 to maintain ZTable. To lighten up the code -load on BADI you may simply raise a custom event and move on. You will configure a job that runs your program when that particular event is raised. This will need the 'burden' of figuring out the changes, though.
An elegant way would be to fire a MATMAS fIDOC for every change to Material, capture that and turn back the changes to ZTABLE. This will facilitate the delta load.

No records when inputting new field from linked tables.

I have linked two tables in a report. If I use only fields from one table, no problem. As soon as I add a field from the other table no records are pulled. I am using the same filed "IncidentID" in both tables as a link. If I attempt to pull the "IncidentID" from the second table no records are pulled. There does not appear to be any key fields or indexes in either table if that helps.

Here are the SQL queries. The first string is without any fields from "WorkLog". The second is after adding the field "WorkLog.Incident Number" to the form.
SELECT "HPD_Help_Desk"."Incident Number", "HPD_Help_Desk"."Reported Date", "HPD_Help_Desk"."Direct Contact Site", "HPD_Help_Desk"."Assignee", "HPD_Help_Desk"."Status", "HPD_Help_Desk"."Last Modified Date", "HPD_Help_Desk"."Description", "HPD_Help_Desk"."Priority"
FROM "HPD:Help Desk" "HPD_Help_Desk"
WHERE "HPD_Help_Desk"."Status"='Pending' AND ("HPD_Help_Desk"."Assignee"='Debbie Kiolbasa' OR "HPD_Help_Desk"."Assignee"='John L King' OR "HPD_Help_Desk"."Assignee"='Ligaya Plumlee' OR "HPD_Help_Desk"."Assignee"='Ryan Keeler')
ORDER BY "HPD_Help_Desk"."Assignee"
SELECT "HPD_Help_Desk"."Incident Number", "HPD_Help_Desk"."Reported Date", "HPD_Help_Desk"."Direct Contact Site", "HPD_Help_Desk"."Assignee", "HPD_Help_Desk"."Status", "HPD_Help_Desk"."Last Modified Date", "HPD_Help_Desk"."Description", "HPD_Help_Desk"."Priority", "HPD_WorkLog"."Incident Number"
FROM "HPD:Help Desk" "HPD_Help_Desk" INNER JOIN "HPD:WorkLog" "HPD_WorkLog" ON ("HPD_Help_Desk"."Incident Number"="HPD_WorkLog"."Incident Number") AND ("HPD_Help_Desk"."InstanceId"="HPD_WorkLog"."InstanceId")
WHERE "HPD_Help_Desk"."Status"='Pending' AND ("HPD_Help_Desk"."Assignee"='Debbie Kiolbasa' OR "HPD_Help_Desk"."Assignee"='John L King' OR "HPD_Help_Desk"."Assignee"='Ligaya Plumlee' OR "HPD_Help_Desk"."Assignee"='Ryan Keeler')
ORDER BY "HPD_Help_Desk"."Assignee"
BTW - The "Left Outer Join" receives the errors noted in above post whereas the default "Inner Join" just comes back with empty records.
Unable to use the third party tools due to restrictions on loading software. Also we are unable to access the lower level database.
Thanks

How to clear rows from iterator and re-fetch fresh data from the table ?

Hi,
I am using JDev 11.1.1.2.0
I have generated JPA Service Facade and by using it, I have created Data Control which finally I have dragged & dropped on my .jsff file.
In viewObject, there is a method clearCache() to clear the viewObject data.
Iterator has also one method clear() but when it invoked, ADF framework throws StackOverFlow error.
So, I want to clear my iterator before calling executeQuery() method.
How Can I clear it ?
Because In my case if I run executeQuery() method on DCIteratorBinding, it is not getting updated with the lates value from DB table.
So I want to clear all the rows from iterator and then want to call executeQuery() method to updated latest data from DB tables.
I have also tried below peace of code to refresh iterator but still iterator getting updated with two same rows () while in DB it is proper.
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding dcb =
fctx.getApplication().createValueBinding("#{bindings}");
DCBindingContainer iteratorbindings =
(DCBindingContainer)dcb.getValue(fctx);
DCIteratorBinding dciter =
iteratorbindings.findIteratorBinding(<iteratorname>);
dciter.releaseData();
dciter.executeQuery();
dciter.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
regards,
devang

Hi,
Have you try to drag and drop to your refresh or query button an "Execute" operation from the Data Control Pallete?
We are using JPA/ EJB Session Beans and that works for us.
regards,
pino

Trackpad serious problems!

Hi,
I own a Macbook Uniblock 2.4Ghz (Model #...). Under MacOS all is well.
After installing both Windows XP SP3 and Windows Vista Ultimate 32bit using Bootcamp (all were fully updated to the latest drivers & updates), I have encountered a very serious problem.
The problem is related to the Windows touch pad driver and the CPU SSE.
When playing music and moving/clicking the TouchPad I get the sound distorted for a some seconds until it goes back to normal.
When using Virtual DJ, doing the same the application crashes.
When running PassMark Burn-In Test V6, I get CPU SSE failures when moving the integrated Touch Pad.
When doing the same stuff with Mighty Mouse or any Other USB mouse none of the above happens.
Thanks,
Omry Aviry

This used to happen to me. Did you download the trackpad drivers update? http://support.apple.com/downloads/MultiTouch_Trackpad_Update_for_Windows_XP__Vista

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

BRFplus: Problem updating values in an internal table in a loop expression

Hi
I'm looking into the loop expression type of BRFplus and I have come across a problem updating an internal table, I'm trying to create and populate the table using a loop, here is the functionality I'm trying to achieve:
In a rule set create an internal MONTH_TBL table containing 12 rows of two columns: MONTH_NUM containing values 1 through 12 and MONTH_VAL containing an amount (initially 0,00 EUR in all 12 rows).
After initializing the table traverse through SFLIGHT table and for each row add PRICE from the table to MONTH_VAL in the row of MONTH_TBL corresponding to the month of FLDATE field in SFLIGHT.
The initialization of MONTH_TBL works as intended, as does the traversal of and retrieval of values from SFLIGHT. The problem however is the update of the internal table MONTH_TBL (defined as result data object for the function). I don't get an error, but the tables does not get updated, and I cannot seem to find out what the problem is. I would have attached an XML extract of the function + ruleset for information, but it dosen't seem like that is possible, I could e-mail it on request (for SAP employees with access to system QU5 the function is LOOP_TEST in application Z_KLAUS_TEST).
I hope that this is sufficient information to understand the issue that I'm dealing with.
best regards
Klaus Stenbæk, KMD

Hi Klaus,
The Loop expression is part of NW 7.02 which is not yet released. When you experience the problem as part of a test you should have a contact at SAP for dealing with problems/errors. Usually SAP-internal messages are used for this purpose. Please clarify with your SAP contact how the model is.
BR,
Carsten

Lookout OPC Client – Asynchronous I/O and Update Rate serious problems (Sequence of data)

I am using the Lookout OPCClient driver to connect to AB PLCs (EtherNet/IP protocol) and power measurement equipment (Modbus TCP protocol). The OPC server is the NI OPC Servers. The data that are read out from PLCs and PMs are energy meter readings, energy counters, power, voltage, current, frequency, power factor and el. energy quality measurements (THD). That energy meter readings are being stored in SQL database.
I am experiencing a serious problem regarding the accuracy of the meter readings. Several times per day, randomly, meter readings are losing the time sequence. For example, sequence is: 167, after few seconds 165, 166. In other words, present value followed by two previous old values. That generates a serious problem in our application that is expecting a naturally rising sequence of counter values.
Analyzing further, I isolated the problem to the connection between Lookout OPCClient and OPC Server. I made a simple application in Lookout 6.7 (opcproc.lkp, attached) with OPCClient parameters: NIOPCServers, OPC2, Asynchronus I/O, Update rate: 10000, Deadband: 0.0, that is reading just one tag from NI OPC Servers demo application (simdemo.opf).
By using OPC diagnostic tool from NI OPC Servers I record the sequence of OPC requests and responses. I found out that OPCClient sends every 2.5 sec “IOPCAsyncIO2::Refresh2()” call that is request for refreshing of all items in one OPC group. Few milliseconds later OPC Sever responds with callback function “IOPCDataCallback:: OnDataChange()(Device Refresh)” that actually refresh the data.
This periodic sequence is intrinsic to the OPCClient and cannot be disabled or changed (by my knowledge). This sequence is periodically interrupted by “IOPCDataCallback:: OnDataChange()” caused by update rate parameter of OPCClient (client is subscribed to server for periodic update of changed items).
In the case of demo application on every 4 refresh callbacks caused by refresh requests (2.5 sec) there is one update subscription callback determined by Update rate (10 sec).
QUESTION 1:
What is the purpose of update sequence and update rate when we have every 2.5 sec fresh values?
PROBLEM
The problem arises when we have a large number of items in OPC group. In that case the OPC Server starts to queue refresh requests because they cannot be fulfilled in 2.5 sec time because of large number of I/O points that must be scanned. At the same time update subscription callbacks are running at the period determined by Update rate. I observed in my production system that regular update callbacks has higher priority than refresh callbacks from the queue. That causes the loosing of timed sequence of data. After the update callback with fresh data, sometimes follow one or two refresh callbacks from queue with old (invalid) data. By adjusting Update rate parameter (1 hour, 2hours …) I can postpone the collision of data refreshes but I cannot eliminate it. Furthermore, the 2.5 sec automatic refresh are large burden for systems with many I/O points.
QUESTION 2:
Is there a way to disable automatic refresh request every 2.5 sec and just use update requests determined by Update rate?
QUESTION 3:
Is there a way (or parameter) to change the period of automatic refresh (2.5 sec)?
This problem is discovered for Lookout 6.5, 6.6 and 6.7 so I could say it is intrinsic to OPCClient. If I use synchronous I/O requests there is not an automatic refresh, but that is not an option for large systems.
Thanks!
Alan Vrana
System engineer
SCADA Projekt d.o.o.
Picmanova 2
10000 ZAGREB
CROATIA
T +385 1 6622230
F +385 1 6683463
e-mail [email protected]
Alan Vrana
SCADA Projekt d.o.o.
ZAGREB, Croatia
Attachments:
opcproc.zip ‏4 KB

The physical connection from LV to the switch is (I believe) copper crossover to fiber converter into a switch. Then, fiber from the switch to the end device (relay). The relay has all of the typical modbus registries and has been verified by inducing signals in to the system and measured/polled in LabVIEW and observed Variable Monitor. I am working with LV 8.2 and 8.5.
An OPC server would only add an additional translation of addressing within the configuration. The only real draw back would be the network overhead required to do this processing and not being representative of the end design configuration.
I will reiterated my question in another way:
I must answer the question to management that relates to data collection, test results and analysis; how often are you polling the client in relation to the outcomes measured? At this time I can not point at any configuration in the set up and execution that directs the data framing rate. I only measure the traffic and work with results. This needs to be clearly identified based on the relay modbus/tcp design capability of supporting an fixed number of client requests per second.
For testing purposes, I would like to be able to stress the system to failure and have prove capabilities with measured data. The present problem is that I have no basis to establish varying polling rates that effect the measured data transmission.
This raises another question. What handles the Variable Monitor data requests and how is this rate determined?
Thanks for your interest in my efforts.
Steve

Selecting from one table and Update another in the same Page

Could someone help me with this HTMLDB task. In my page design, I am selecting data from two tables (masters: DEPT, EMP) which I want to display on the left column of the page and at the same time a user would be able to update another table (ATTENDANCE:with many children) which would have a radiogroup on the right side for each value of the master such as employee name. The placement of data has to appear in corresponding rows on the page. For instance, employee names of the master table must appear on the same row with its corresponding child value. The page would be grouped by DEPT_NO. The user would click on the department name, a new page with the employee name would apprar. From that page, the user would then update attendance column for each employee in that department. In this operation, it is only the ATTENDANCE table that is being updated. I can send out more information about the structure of the tables if you need more information. I tried many HTMLDB options, forms, reports, etc. I have not been able to get quite right. Your help will be appreciated.

Raju,
Thanks for responding to my problem. I have actually tried using the example on how-to you sent me a link to but it did not help as I expected. You see, the page would be updated every meeting date for each employee. I can send you more information about the table structure if you like. However, let me see if this will help you a bit.
Tables are: 1) Dept [dept_no (pk),dept_name] 2) EMP [emp_no (pk),emp_name, dept_no(fk)] 3) Meetings [meet_key(pk),attended, meeting_date, emp_no(fk)]
What I want to do is create two pages, one would list the departments, when a user selects a department, the user would be linked to a meeting attandance page. The meeting attendance page would list department name once, Meeting date once, and then list employees in that department. At the right column of every employee would be a checkbox for meeting.attended for update. The meeting_date would be pre-populated so that what the user would do is just check Yes/NO. The second page is the one I'm having the most problem with.
If I can do a fetch from dept, emp, and meetings and then do an update on the Meetings table on the same page, I think that might solve the problem. That was how I solved it in MS Access three years ago.
Here is email address in case you want to contact me directly. [email protected]
Thanks again for your help.

Updating Infotype 0025 from acustom table....serious problem

Similar Messages

Maybe you are looking for