Updating pie graph with the pivot table data.

Hi:
I have two components, the first is a pivot table and second
of them is the pie graph, the two components were created in JDeveloper 11g
on the same page through the same view object, this view object was created through
a query.
I need to update the pie graph through the pivot table data.
ie, according to the data containing on the pivot table, to update the pie graph.

Hi,
BPM can be used to validate and update tables. You can have a transformation step in BPM to validate, and either a JDBC or RFC adapter to update XI table...depending on if the table is an ABAP table or table create outside of ABAP using the vendor's dba tools.
As for sending file based on counter or timestamp in the name, you can develop a simple adapter user-module using java which can retrieve the file name(s) being processed. If the name satisfy the rules you have, then proceed, or else terminate the processing in the adapter.
Regards,
Bill

Similar Messages

Updating xy graph with the last point different

I want to display a simulation of the path of a rolling ball as updating xy graph.
The actual last point of the plot should be different from the older points, I imagine e.g.a thick circle.
The coordinates of the points I hold in two arrays, so I need a xy graph,
when I used xy chart buffer to get un updating graph all points of the
plot are displayed in the same way, stars, circles and so on.
I

Ok, so the solution is coming from what you've just said. One plot for the old positions I assume you want to display a certain number of points... e.g. the last 10positions and one plot for the current ball position.
Tell me if this is ok...
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
ball.vi ‏50 KB

Problem with the Pivote Table order by Clause in OBIEE report

Hello All,
Can anyone help?
I am developing a report with 3 columns
1. Year
2. Customer name
3. Amount
I need Year in Ascending & Amount Descending (Group by Year and then Desc by amount)
In Table view data is displayed correctly, but in Pivote Table it’s not sorting correctly
Table View ( This is correct)
Year     Customer Name     Amount
2009,     a1,     260,000.00
     a2,     152,030.00
     a3,     20,000.00
2008,     a6,     193,080.00
2004,     a7,     860.2
     a8,     114.7
2003,     a9,     200,243,813.40
     a10,     91,351,364.10
Pivote Table Results as follows:
Year     Customer Name     Amount
2009,     a1,     260,000.00
     a2,     152,030.00
     a3,     20,000.00
2008,     a6,     193,080.00
2004,     a7,     860.2
     a8,     114.7
2003,     x,     26,374,818.00
y, ....................
a9, 200,243,813.40
For year 2003 in place of 'x' value a9 value has to be shown........
Regards,
SMA

Your post doesn't help a lot. Why it's still not solved ?
If it's caused by the ascendant order, the only way that you have is to pivot your table :
http://gerardnico.com/wiki/dat/obiee/presentation_service/obiee_transformation_table_to_pivot
And then you can set all sort that you want.
success
Nico

Pivot table data format type

Hi.
I was trying to make a simple crosstable report with this structure:
----------Name
ID-------Description
Example:
---------Name1------------Name2-------------Name3
ID1---Description1
ID2----------------Description2
ID3--------------------------------- Description3
But i can't, because it only appears numeric functions for pivot table data
How can i configure pivot table? Why is defined the pivot table data as a numeric field with functions summation, count, ......? Can't i show plain text of the description?
Edited by: user3284194 on 18-abr-2013 4:48

Hi,
Try increasing the rangeSize of the iterator to some value like 150?
-Arun

Trigger in mutation - Update another rows in the same table with a trigger

Hi ,
I try to do a before update trigger on a table , but the trigger is in mutation. I understand why it do that but my question is :
How can I update other rows in the same table when a UPDATE is made on my table??????
Here is my trigger :
CREATE OR REPLACE TRIGGER GDE_COMPS_BRU_5 BEFORE
UPDATE OF DEPARTEMENT--, DISCIPLINE, DEG_DEMANDE, CE_ETAB
ON GDEM.COMPOSITION_SUBV
FOR EACH ROW
Organisme : FQRNT-FQRSC
Date de création : 14-07-2011
Date de modification :
Modifié par :
Auteur : Johanne Plamondon
Description : Ce déclencheur s'executera lors de la modification
du responsable dans la table COMPOSITION_SUBV
DECLARE
V_OSUSER V$SESSION.OSUSER%TYPE;
V_PROGRAM V$SESSION.PROGRAM%TYPE;
V_TERMINAL V$SESSION.TERMINAL%TYPE;
V_MACHINE V$SESSION.MACHINE%TYPE;
V_MODULE V$SESSION.MODULE%TYPE;
V_LOGON_TIME V$SESSION.LOGON_TIME%TYPE;
V_AUDIT_ID NUMBER;
vSEQ NUMBER;
i NUMBER;
vID DEMANDE.ID%TYPE;
BEGIN
begin
SELECT OSUSER, PROGRAM, TERMINAL,MACHINE,MODULE, LOGON_TIME
INTO V_OSUSER,V_PROGRAM,V_TERMINAL,V_MACHINE,
V_MODULE,V_LOGON_TIME
FROM V$SESSION
WHERE TYPE = 'USER'
AND USERNAME = USER
AND LAST_CALL_ET IN (0,1)
AND ROWNUM < 2;
exception when others then null; end;
IF NVL(:NEW.SC_PART,' ') = 'CHC' THEN
SELECT COUNT(*)
INTO i
FROM DEMANDE
WHERE DEM_REF = :NEW.DEM_ID
AND PER_NIP = :NEW.PER_NIP;
IF i = 1 THEN
SELECT ID
INTO vID
FROM DEMANDE
WHERE DEM_REF = :NEW.DEM_ID
AND PER_NIP = :NEW.PER_NIP;
UPDATE COMPOSITION_SUBV
SET --CE_ETAB = :NEW.CE_ETAB,
--DISCIPLINE = :NEW.DISCIPLINE,
DEPARTEMENT = :NEW.DEPARTEMENT,
--DEG_DEMANDE = :NEW.DEG_DEMANDE,
DATE_MODIF = SYSDATE,
USER_MODIF = V_OSUSER
WHERE DEM_ID = vID
AND PER_NIP = :NEW.PER_NIP
AND ANNEE = :NEW.ANNEE;
END IF;
END IF;
/*EXCEPTION
WHEN OTHERS THEN
NULL;*/
END;

A standard disclaimer, the mutating trigger error is telling you that you really, really, really don't want to be doing this. It generally indicates a major data model problem when you find yourself in a situation where the data in one row of a table depends on the data in another row of that same table. In the vast majority of cases, you're far better off fixing the data model than in working around the problem.
If you are absolutely sure that you cannot fix the data model and must work around the problem, you'll need
- A package with a collection (or global temporary table) to store the keys that are modified
- A before statement trigger that initializes the collection
- A row-level trigger that adds the keys that were updated to the collection
- An after statement trigger that iterates over the data in the collection and updates whatever rows need to be updated.
If you're on 11g, this can be simplified somewhat by using a compound trigger with separate before statement, row-level, and after statement sections.
Obviously, though, this is a substantial increase in complexity over the single trigger you have here. That's one of the reasons that it's generally a bad idea to work around mutating table exceptions.
Justin

Update to power query does not refresh the pivot table

Hello all,
whenever i make a change to power query dataset and do a refresh, the data will not be refreshed on the pivot table build on the power query dataset.
Is there anything which i missed while updating the powerquery?
Thanks
Satya

I have created the Powerquery dataset and loaded it into Data model. Then i have created the pivot table using the external connection.
After making changes to dataset and then loaded the dataset to Data model. After these changes, once I click on the refresh pivot table or refresh all from data tab nothing changes on the pivot tables.
Thanks
Satya

How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?

How do I get the numbers ipad app to plot a graph of dates against values, where the most recent date is on the right of the graph, but the most recent date is at the top rather than bottom of the rows in the table?
Also how can it be a line graph without plotting a circle at each value?
Thanks this is very frustrating

Make a copy of the table and produce your Line chart or Bar chart from the copy. Sort the copy into the order you want to see in your chart.
Alternately you could use a Scatter Chart...
Jerry

Will MEMASSPO or MEMASSIN work to update PO with new transit table data

I'm looking to refresh PO's (ME22N) with new transit table data. Would MEMASSPO or MEMASSIN refresh PO's, i.e. new delivery date, with the new transit data.
The only work around we have found is to go into each PO, add a text field and then save. We want to write a WinShuttle script to fix the thousands of PO's, but some PO's already have a text field, and the WinShuttle script will erase the text previously entered in the PO.
Thanks.

MEMASSIN will certainly not effect purchase orders, as it is the info record mass maintenance.
And changes in master data never effect already existing transactional data.
I dont think that MEMASSPO will effect any other table than the 2 tables listed (EKKO and EKPO)
But it is easy for you to just test it for a single PO with MEMASSPO, so you will immediatly know if it does or not.

Im trying to update db table in user exit, with the internal table

Im trying to update db table in user exit, with the internal table
my scenario:
loop at itekpo.
updating itekpo -
> at the end of user exit the db table ekpo have to be updated
endloop.
Im updating internal table, using
MODIFY itekpo TRANSPORTING INCO1 INCO2 WHERE ebeln = itekpo-ebeln
where itekpo is internal table, but it is not updating the db table 'ekpo'.
i also tried updating ekpo directly !
Thanks in advance

Hi,
you can search in the forum itself,
Try this link for instance
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=tocreateaBADI&adv=false&sortby=cm_rnd_rankvalue
You can find a code for finding BADI as a report with the following Transaction
finding badis
How to find BADIs
Reward if helpful
Regards
Byju

2 different tables in the main window with same internal table data

Hi All,
can we have 2 diffterent tables with same internal table data into its work area in the main window.Is it possible or we will get any run time error.?
is it like having 2 nested loop with same internal table ?
ex : loop at itab1 into wa_itab.
loop at itab1 into wa_itab.
endloop.
endloop.
can we use like this?

Hi,
there will not be any error ...but what is the use of it...
do you need to have a controlled way of display ...of the data...
If so then you create another workarea in the global definitions of the same type and then use it...
Regards,
Ram

Re-creating a pie chart with the pie graph tool...

Hi,
Hope you're well.
I've created a pie graph using the pie graph tool.
I'd like to create another one of the same size but when I enter in the exact same dimensions when it asks you to give the dimesions you want for the circle, the circle never matches what the measurements of the circle are that I want to copy.
Just to illustrate in case its not clear, the existing pie graph circle size is something like 500x500 px but when I type that in when I want to draw another one it does not match the size of the original.
Anyone know what might be going on?
Thanks so much for your help.

500x500 px but when I type that in when I want to draw another one it does not match the size of the original.
shouldnt happen if all is set correctly,
i presume you select the pie g tool and click on artboard then insert the dimensions in the pop up dialogue... if all is set correctly it could be (eg) a thicker stroke or a style applied to to the original... also make sure everything is set to px....
G

XY graphing with large amount of data

I was looking into graphing a fairly substantial amount of data. It is bursted across serial.
What I have is 30 values corresponding to remote data sensors. The data for each comes across together, so I have no problem having the data grouped. It is, effectively, in an array of size 30. I've been wanting to place this data in a graph.
The period varies between 1/5 sec and 2 minutes between receptions (its wireless and mobile, so signal strength varies). This eliminates waveform graph as the time isn't constant and there's alot of data(So no random NaN insertion). This leaves me with an XY graph.
Primary interest is with the last 10 minutes or so, with a desire to see up to an hour or two back.
The data is farily similar, and I'm tring to possibly split it into groups of 4 or 5 sets of ordered pairs per graph.
Problems:
1. If data comes in slow enough, everything is ok, but the time needed to synchrounously update the graph(s) often can exceed the time it would take to fully recieve the chunk of data which contains these data points. Thinking asynchrounously is useless, as the graphs need to be reasonably in tune with the most recent data recieved. I can't have the an exponential growth in the delta of time represented on the graph and the time the last bit of data was recieved.
2. I could use some advice on making older data points more sparse to allow for older data to be viewed, but with a sort of 'decay' of old data I don't value that 1/5 second resolution at all.
I'm most concerned with solving problem 1, but random suggestions on 2 are most welcome.

I didn't quite get the first question. Could you try to find out where
exactly the time is consumed in your program and then refine your
question.
To the second question (which may also solve the first question). You
can store all the data to a file as it arrives. Keep the most recent
data in a let's say shift register of the update loop. Add a data point
corresponding the start of the mesurement to the data and wire it to a
XY graph. Make X Scrollbar visible. Handle the event for XY graph:X
scale change. When the scale is changed i.e. the user scrolls the
scroll bar, load data from the file and display it on the XY graph.
This was a little simplified, it's a little more complicated.
In my project, I am writing an XY graph X Control to handle a bit
similar issue. I have huge data sets i.e. multichannel recordings
with millisecond resolution over many hours. One data set may be
several gigabytes, so the data won't fit on the main memory of the
computer at once. I wrote an X control which contains a XY graph. Each
time the time scale is changed i.e. the scroll bar is scrolled, the X
control generates a user event if it doesn't have enough data to
display the time slice requested. The user event is handled outside the
X Control by loading the appropriate set of data from the disk and
displaying it on the X Control. The user event can be generated already
a while before the X Control is out of data. This way the data is
loaded a bit in advance, which allows seamles scrolling on the XY
graph. One must notice that the front panel updates must be turned off
in the X Control when the data is updated and back on after the update
has finnished. Otherwise the XY graph will flicker annoingly.
Tomi Maila

ABAP Code for Backup the entire table data in the application server

Hello Friends,
I have to create the table data Backup and Store the entire table data in the application server and also be able to restore the data back if needed.
this should be dynamic program for any table based on the table name given on the application server.. I have developed a program for this but its having problems with the Quantity, amount. Its not writing it correctly at the application level.
ANy Suggestions on this.
Below is the program for this.
Thanks,
Ster.
* Report YWMM_TABLE_DUMP                                             *
REPORT ywmm_table_dump .
TABLES :
        dd03l.
* Type spool declaration
TYPE-POOLS:
        abap, slis.
DATA: i_table_data1 TYPE REF TO data.
DATA : it_dd03l LIKE dd03l OCCURS 0 WITH HEADER LINE.
*DATA : gt_fieldcat TYPE lvc_s_fcat.
DATA : i_fcat      TYPE STANDARD TABLE OF lvc_s_fcat,
       l_dr_line         TYPE   REF TO data,
       l_v_as4vers       TYPE as4vers.
FIELD-SYMBOLS: <f_table_data1>     TYPE STANDARD TABLE,
               <f_wa_table_data1> TYPE ANY.
SELECTION-SCREEN: BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
PARAMETERS: rb_copy RADIOBUTTON GROUP map DEFAULT 'X',
            rb_rest RADIOBUTTON GROUP map.
SELECTION-SCREEN: END   OF BLOCK bl1.
SELECTION-SCREEN: BEGIN OF BLOCK bl2 WITH FRAME TITLE text-002.
PARAMETERS: p_table TYPE tabname OBLIGATORY,
            p_plfld TYPE dd03l-fieldname.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_bkfile TYPE localfile OBLIGATORY.
SELECTION-SCREEN: END   OF BLOCK bl2.
PERFORM get_data.
IF rb_copy = 'X'.
PERFORM backup.
ELSEIF rb_rest = 'X'.
PERFORM database_update.
ENDIF.
*&      Form get_data
FORM get_data.
CLEAR   i_fcat.
REFRESH i_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
            i_structure_name = p_table " Table Name
       CHANGING
            ct_fieldcat      = i_fcat
       EXCEPTIONS
            OTHERS           = 1.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog = i_fcat
IMPORTING
    ep_table        = i_table_data1.
IF sy-subrc = 0.
    ASSIGN i_table_data1->* TO <f_table_data1>.
ELSE.
    WRITE: 'Error creating internal table'.
ENDIF.
IF rb_copy = 'X'.
    SELECT * FROM (p_table) INTO CORRESPONDING FIELDS OF
              TABLE <f_table_data1> UP TO 20 ROWS.
ELSEIF rb_rest = 'X'.
    CREATE DATA l_dr_line LIKE LINE OF <f_table_data1>.
    ASSIGN l_dr_line->* TO <f_wa_table_data1>.
*Get Data from Application Server
* Opening the dataset P_BKFILE given in the selection screen
    TRANSLATE p_bkfile TO LOWER CASE.
    OPEN DATASET p_bkfile FOR INPUT IN TEXT MODE." ENCODING DEFAULT.
    IF sy-subrc NE 0.
*    MESSAGE:
    ELSE.
      DO.
* Reading the file from application server
        READ DATASET p_bkfile INTO <f_wa_table_data1>.
        IF sy-subrc = 0.
          APPEND <f_wa_table_data1> TO <f_table_data1>.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
* Closing the dataset
      CLOSE DATASET p_bkfile.
    ENDIF.
ENDIF.
ENDFORM.                    " get_data
*&      Form backup
*       text
* --> p1        text
* <-- p2        text
FORM backup.
TRANSLATE p_bkfile TO LOWER CASE.
OPEN DATASET p_bkfile FOR OUTPUT IN TEXT MODE.
IF sy-subrc NE 0.
    WRITE: text-017.
    STOP.
ELSE.
    LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
      TRANSFER <f_wa_table_data1> TO p_bkfile.
    ENDLOOP.
ENDIF.
CLOSE DATASET p_bkfile.
ENDFORM.                    " backup
*&      Form database_update
FORM database_update.
DATA : i_mara_u TYPE STANDARD TABLE OF mara WITH HEADER LINE,
         i_ekpo_u TYPE STANDARD TABLE OF ekpo WITH HEADER LINE,
         i_eban_u TYPE STANDARD TABLE OF eban WITH HEADER LINE,
         i_resb_u TYPE STANDARD TABLE OF resb WITH HEADER LINE,
         i_plpo_u TYPE STANDARD TABLE OF plpo WITH HEADER LINE,
         i_stpo_u TYPE STANDARD TABLE OF stpo WITH HEADER LINE,
         i_vbap_u TYPE STANDARD TABLE OF vbap WITH HEADER LINE,
         i_vbrp_u TYPE STANDARD TABLE OF vbrp WITH HEADER LINE,
         i_lips_u TYPE STANDARD TABLE OF lips WITH HEADER LINE,
         i_afvc_u TYPE STANDARD TABLE OF afvc WITH HEADER LINE,
         i_asmd_u TYPE STANDARD TABLE OF asmd WITH HEADER LINE,
*           i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
         i_qmel_u TYPE STANDARD TABLE OF qmel WITH HEADER LINE,
         i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
         i_esll_u TYPE STANDARD TABLE OF esll WITH HEADER LINE,
         i_t165_u TYPE STANDARD TABLE OF t165 WITH HEADER LINE,
         i_t165e_u TYPE STANDARD TABLE OF t165e WITH HEADER LINE,
         i_twpko_u TYPE STANDARD TABLE OF twpko WITH HEADER LINE,
         i_tpext_u TYPE STANDARD TABLE OF tpext WITH HEADER LINE,
         i_ce4mxpa_u TYPE STANDARD TABLE OF ce4mxpa WITH HEADER LINE,
         i_ce4mxpa_acct_u TYPE STANDARD TABLE OF ce4mxpa_acct WITH
                                                         HEADER LINE,
         i_zaim_u TYPE STANDARD TABLE OF zaim WITH HEADER LINE,
         i_s012_d TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
         i_s012_i TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
         i_dummy TYPE STANDARD TABLE OF mara.
CASE p_table.
    WHEN 'MARA'.
*     Non-Key
      PERFORM move_to_table USING   <f_table_data1>
                            CHANGING i_mara_u[]
                                     i_mara_u.
      PERFORM update_table USING i_mara_u[].
ENDCASE.
ENDFORM.                    " database_update
*&      Form move_to_mara
FORM move_to_table USING    p_tab_from TYPE STANDARD TABLE
                   CHANGING p_tab_to   TYPE STANDARD TABLE
                            p_w_table.
DATA: l_wa_fcat TYPE lvc_s_fcat.
FIELD-SYMBOLS: <f_field_from> TYPE ANY,
                 <f_field_to>   TYPE ANY.
LOOP AT p_tab_from ASSIGNING <f_wa_table_data1>.
    LOOP AT i_fcat INTO l_wa_fcat.
      ASSIGN COMPONENT l_wa_fcat-fieldname
     OF STRUCTURE <f_wa_table_data1> TO <f_field_from>.
      ASSIGN COMPONENT l_wa_fcat-fieldname
     OF STRUCTURE p_w_table TO <f_field_to>.
      <f_field_to> = <f_field_from>.
    ENDLOOP.
    APPEND p_w_table TO p_tab_to.
ENDLOOP.
ENDFORM.                    " move_to_mara
*&      Form update_table
FORM update_table USING p_table_update TYPE STANDARD TABLE.
SELECT SINGLE *
    FROM dd03l
   WHERE fieldname = p_plfld
     AND tabname   = p_table
     AND keyflag   <> 'X'
     AND as4local = 'A'
     AND   as4vers = l_v_as4vers
     AND   ( comptype = 'E' OR comptype = space ).
IF sy-subrc = 0.
*   Do update
    IF NOT p_table_update IS INITIAL.
      UPDATE (p_table) FROM TABLE p_table_update.
      IF sy-subrc = 0.
        COMMIT WORK.
      ELSE.
        ROLLBACK WORK.
        WRITE: text-003.
        STOP.
      ENDIF.
    ENDIF.
ELSE.
*delete and insert.
    IF NOT p_table_update IS INITIAL.
*      DELETE (p_table).
      IF sy-subrc = 0.
        INSERT (p_table) FROM TABLE p_table_update.
        IF sy-subrc = 0.
          COMMIT WORK.
        ELSE.
          ROLLBACK WORK.
          WRITE: text-018.
          STOP.
        ENDIF.
      ELSE.
        ROLLBACK WORK.
        WRITE: text-018.
        STOP.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    " update_table
Edited by: Julius Bussche on Jul 18, 2008 1:43 PM
Please use a meaningfull subject title!

ARS,
I am struggling a bit to get this.
there is a syntax error,
Field "FIELDS_INT-TYPE" is unknown. It is neither in one of thespecified tables nor defined by a "DATA" statement.
Again you have asked to move to a diffrent table. What is that table and how to build it.
    LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
      LOOP AT i_fcat INTO l_fcat.
        IF l_fcat-inttype EQ 'P'.
          ASSIGN COMPONENT l_fcat-fieldname
              OF STRUCTURE <f_wa_table_data1> TO <f_field>
              TYPE     fields_int-type
              DECIMALS fields_int-decimals.
        ELSE.
          ASSIGN COMPONENT l_fcat-fieldname
              OF STRUCTURE <f_wa_table_data1> TO <f_field>
              TYPE     fields_int-type.
        ENDIF.
        " Move <f_field> to a new table and use this table for download
      ENDLOOP.
      TRANSFER <f_wa_table_data1> TO p_bkfile.
    ENDLOOP.
Ster

Pivot table data source keeps referring to old file name

Hi,
I am using Excel 2013 on Windows 8
I create a table, and insert a pivot table that use this table as data source
I close the excel and rename the file from "myfile.xlsx" to "newfile.xlsx, and then open it again
When trying to refresh my Pivot Table, I get the following Error:
"We couldn't get the data from 'Table1' in the workbook 'C:\myfile.xlsx' Open this workbook in Excel and try again."
i.e. it is still looking for table using the old file name.
I need to update the file every week, so having to manually go back and change source file name for every pivot is very time consuming and painful for me :-(
Please investigate and advise how to fix this ?

Hi,
Based on my tested in my environment (Window 8.1 & Excel 2013), the error message pop up when a pivot table using an external data source. If you use the table as external data source, pivot table uses OLEDB to connect it, it'll refresh failed after
you changed the file name. It's by design.
Then, we may try the two workaround to avoid it:
1) Keep the data source table and pivot table in the same file.
2) Add the table to a connection, steps:
Click Data tab>Connection> Add> Browse more> Choose the file.
Please try to change in new file in property before you refresh the Pivot table.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Power Pivot Slicer options not showing in the Pivot Table Field list

Excel 2013. In all the tutorials I watch when you create a Pivot Table using Power Pivot there are Slicer options in the
Pivot Table Fields list. Slicer Horizontal, Slicer Vertical These do not show for me. I see Filters, Value, Row, Column only. Is there a setting I need to turn on? When I click on PowerPivot
at the top, the first icon on the bar is Manage Data model, not Powerpivot as I have seen on some of the youtube tutorials. Thank you in advance.

Thank you for trying but it's not what I am after. I understand how to use Slicers with pivot tables. My question relates to Pivot Tables created using PowerPivot. Directly under the Pivot Fields list on the right is a section where
you choose what you want to pivot i.e Filters, Values, Rows, Columns. These are standard with any pivot table. When I watch videos on PowerPivot there are 2 additional options in the section. Slicer Vertical, Slicers Horizontal.
The video comments they only show in when creating a pivot table using PowerPivot. These 2 options are not there for me. I don't know why. It maybe the version of office I am using which is Microsoft Office Plus 2013. I'd like them
included. Appreciate you taking the time to help.

Updating pie graph with the pivot table data.

Similar Messages

Maybe you are looking for