Upgrade 4.6C to ECC6.0 IT0000 can't be overviewed, can only be displayed..

dear all,
we are currently in the process of upgrade from 4.6C to ECC6.0
and we found this minor issue in the submodule PA:
using tcode pa20/pa30 we can not see any record of IT0000 Actions using 'overview'
but the all the detail actions can be displayed..
this is only happen in IT0000
other infotypes can be overviewed and can be displayed as normal.
anyone ever gone through the same issue?
we have updated patch for SAP HR : SP 32 and EA 7.
the authorization is SAP ALL.
looking forward to hearing from you.
best regards,
dhenny muliawaty (pei pei)

dear JLJ
we're still on the upgrade process. i can only share with you our current condition and the lesson learnt.
we have copy production, upgraded from 4.6C to ECC6.0
and we did not face authorization issue or any other main issues in HR cause we have not yet implemented the submodules e-recruitment/ESS/other sub modules that are being enhanced in ECC6.0
our technical team did the oracle database upgrade + 4.6C upgrade to ECC6.0 right away directly after the oracle database upgrade. TST production is considered ok. we only have some minor configurations to be done.
next when our tech team upgrade the oracle database to ver. 10 in R/3 4.6C production system, and there's a time lag (interval) where our 4.6C production system not directly upgraded to ECC6.0 after the oracle database upgrade done.
and current condition - production database oracle upgraded, the R/3 4.6C Prod has not yet being upgrade to ECC6.0,
R/3 4.6C production face the authorization issue (not HR module, but other modules)
we need to check and apply sap notes/release to solve some errors in 4.6C production system and related modules settle the authorization issue. current progress is still on the technical abap preparation and functional testing.
it's been scheduled the next step - tech team will upgrade the production system from to ECC6.0 within next week. we hope all will be ok.
from this experience, my suggestion is that you need to make sure basis team have implemented sap support packages module related/ enhancement packages- latest updated one in your 4.6C system, then you also needs to check sap release notes implemented related with your module.
would you share the steps have been done in upgrading your production system in detail?
thanks and best regards,
dhenny muliawaty (pei pei)

Similar Messages

View/table v_fagl_activec can only be displayed and maintained with restric

Hi,
When i required to activate a New G.L in ecc.6.0.I am getting following error while activating.
view/table v_fagl_activec can only be displayed and maintained with restrictions.
Please guide me
Thanks and Regards
RAVi

From se11's Delivery and Maintenance tab check out Data Browser/Table View Maint property. Make it without any restrictions.

Hi,View/table J_1IEWTECESS can only be displayed and maintained with restri

hi,
View/table J_1IEWTECESS can only be displayed and maintained with restrictions. i changed package j1in.but when i maintained in sm30.it will display this error. plz help me .
error.View/table J_1IEWTECESS can only be displayed and maintained with restrictions.
Murali.

Hi,
The view is already maintained by SAP , why do u want to change that? it is SAP standard view right???I'm able to add entries without any problem.
regards,
madhu

View/table V_T682 can only be displayed and maintained with restrictions

Hi friends,
When I want to displaying for V_T682 table from SM30 tr.code , it gives me about error " View/table V_T682 can only be displayed and maintained with restrictions". I think ,this table's maintenance status is marked as display/maintenance allowed with restrictions on SE11. So, how I can display the this table from sm30 tr.code.(Note: I have only displaying authorization)

Hi Lakshmipathi
I already knowing to execute the tables from se16 tr.code, My aim is to displaying the customizing view.(Note: I have no authorization for SM34 tr.code.)
Edited by: kaiz34 on Sep 20, 2010 4:51 PM
Edited by: kaiz34 on Sep 20, 2010 4:52 PM

View/table Ztable can only be displayed and maintained with restrictio

Team,
I am getting this error when I enter my table in SM30 and click on either -No Restrictions; -Enter conditions. (I already created Table Maint. for it.)
Error:
"View/table ZTABLE can only be displayed and maintained with restrictions"
I deleted and recreated but the error is still there. What could be the reason for the above error.
Thanks

Hi,
Try this..
Goto SE11 give the table name goto change mode
then click on DELIVERY MAINTANCE TAB
then select option data browser/table maintance allowed as 'DISPLAY?MAINTAINCE ALLOWED.
this will work
Thanks,
Naren

Notification is completed.... can only be displayed

Hi QM Diamonds
After enter the UD code and trying to save the UD one popup is showing "Notification is completed....> can only be displayed "can any body know why this popup is coming and how to skip this popup message.
Details
Notification is completed -> can only be displayed
Message no. IM267
Diagnosis
You are trying to change a notification that has been completed. If a notification has the status completed, you can no longer change it.
Procedure
If you still want to make changes, you must first put the notification back in process again
Edited by: Lakshmiananda prasad on Nov 30, 2011 6:29 AM

hi,
whenever a notification is created in background with inspection lot than after providing the UD, status of Notification auto set as NOCO.
Mssg setting will be there either by user exits or against the UD codes in std sap system.
if u want to remove that mssg than check any user exit will be their or in std sap against UD codes mssg settiings will be their.
It is correct when u want to edit notification than u set it in Put In Process Again.
Regards

After the latest upgrade to OSX 10.9.3 I can only see two screen resolutions for my new MacBook Air 11"

After the latest update to my OSX 10.9.3 I ca see only two Display resolutions 1366 x 768 & 1152 x 648 when I choose scaled in my display preferences. As per Apple site the new MacBook Air 11" can show many display resolutions
Supported resolutions:
1366 by 768 (native), 1344 by 756, and 1280 by 720 pixels at 16:9 aspect ratio; 1152 by 720 and 1024 by 640 pixels at 16:10 aspect ratio; 1024 by 768 and 800 by 600 pixels at 4:3 aspect ratio
Please advise how can I set the resolution to 1280 by 720 pixels as this resolution was more comfortable to me.
Regards
Ahmed

depends widely on what you are doing.
gaming, videos, etc. Then yes 5 hours is normal.
See footnote #4 on apple.com on the macbook Air page.

I upgraded to 20GB and paid but I can only use 6GB

I Upgraded to 20GB and paid for it, but I only used 6GB so far, and earlier today I was trying to take a picture and it said my storage was full but I have not used 20 GB what I paid for. I am very confused and frustrated.

The upgraded storage you paid for is for backing up what's on your iPhone. However, you iPhone has a finite storage capacity which is not increased when you upgrade the iCloud storage. You will need to delete unnecessary/unneeded photos and applications in order to free up some space. Be sure to backup the iPhone prior to deleting those files to make room.
The following is from this Apple document: iCloud: iCloud storage and backup overview
What iCloud backs up
You have important information on your iPhone, iPad, and iPod touch. iCloud automatically backs up your device over Wi-Fi every day while it’s turned on, locked, and connected to a power source. With your device information backed up in iCloud, you can easily set up a new device or restore information on one you already have.
Here’s what iCloud backs up:
Purchase history for music, movies, TV shows, apps, and booksYour iCloud backup includes information about the content you have purchased, but not the purchased content itself. When you restore from an iCloud backup, your purchased content is automatically downloaded from the iTunes Store, App Store, or iBooks Store. Some types of content aren’t downloaded automatically in all countries, and previous purchases may be unavailable if they have been refunded or are no longer available in the store. For more information, see the Apple Support article iTunes in the Cloud availability by country. Some types of content aren’t available in all countries. For more information, see the Apple Support article Which types of items can I buy in my country?.
Photos and videos in your Camera Roll
Device settings
App data
Home screen and app organization
iMessage, text (SMS), and MMS messages
Ringtones
Visual Voicemail

Ever since upgrading to Yosemite on my Mac, I can only configure my time capsule via iPhone. My Mac cannot locate for backup, but CAN find as my internet router. I have followed all suggestions I can locate and have upgraded to newest version.

Time Capsule in Yosemite can be used for router/internet but Mac cannot locate for backups.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

BBP purchase order cannot be changed in R/3. Can only be displayed.

Hi,
(1) I am trying to changes the Payment term in the PO from 0012 to 0000.
But getting error as "BBP purchase order cannot be changed in R/3"
(2) As Invoice is already booked against this PO. I feel the change Payment terms will not come in the picture.
If I want to change the payment terms as well as it should come in the consideration for payment. Then what can be done? what is the way forward?
Thanks in advance.
Pradeep S Yekunde

plz check the settings in spro > material management > purchasing > purchase order > define screen layout at document level.
here you plz check the settings for aktv and me22n for "terms of delivery and payment".
check whther it is optional entry or not.
regards
jash

I have a late 2008 Mac Book Pro and would like to upgrade to 8G, any suggestions on a brand? I can only find Ramjet or Cruical for the upgrade and there is a $30 difference in price.

I ahve a late 2008 Mac Book Pro and would like to upgrade the memory to 8g. I can only find 2 options Crucial and Ramjet. There is a $40 difference in the cost. Does anyone know if one is better than the other?

I have gotten my RAM from either Crucial or Macsales. They are both excellent.

Guidelines to reduce downtime during upgradation R/3 to ECC6

hi all........
Here we implemented SAP R/3 4.6 in the year 2005.
Now we are planning to upgrade our system to ECC6 unicode .
We are planning to upgrade our Production and Development system to SAP
ERP6 EHP4.As part of the upgradation; we had setup a test system with the
following details:
Sun Fire 480R (UltraSparc III + 1.05GHz x 4 processor)
Memory 16 GB and Storage : Sun CSM 200 SATA HDD
SAP R/3 4.71, single code pages 1100, Oracle 9.2.0.8.0, Solaris 9
Test system with 1.2TB data copied from Production System.
We have upgraded the test system using CU&UC method ( Upgrade Guide SAPERP6.0 EHP4 SR1 Abap ). It took 2 days downtime for full upgradation and 8 days for Unicode conversion.
Requirement :
To Upgrade the current systems without any additional hardware to SAP
ERP6 EHP4 Unicode.
As a part of the above, the cluster has to be upgraded to Sun cluster
3.2, and operating system to Solaris10 (5.10)
We are having the following queries:
1. With only 1.3 TB data, we feel, the down time of 10 days is not
realistic.Though we had not deviated from the above mentioned upgrade
guide, what could be the reasons for this down time of 10 days?what arethe affecting factors? Kindly suggest the ways by which we can get
reduced downtime . The referred Notes are (784118, 855772, 952514,
936441, 954268, 864861 ) still we are unable to pin point the reason. Abreak up of this down time is given below for reference.
2. Are there any alternate approved upgradation methods to reduce
downtime in our present set up? (details of present set up is given below)
3. How to calculate the down time with reference to(sapnote:857081) to in
our setup
Current Production System Details :
System : Sun Fire V890
Processor : 1.5GHz UltraSPARC IV+ processors -- 8no.s
Memory : 64 GB
Storage : Sun Storagetek 6180: HDD FCAL(16 no.s x 450 GB)
15,000-rpm 4 Gb/sec 4GB data cache (Storage connected to server using FC
cable)
SAP : R/3 4.71 single code pages 1100
Database : Oracle 9.2.0.8 data-size is around 1.3 TB
OS : Solaris 9 (5.9)
Cluster : Sun cluster 3.1
Network : 1GB ethernet (1000BASE-SX)
Architecture : Application and database server on Same system
SAP Development system specification same as the above with 187 GB data
size. PRD and DEV systems are on cluster; PRD failover to DEV system.
The time taken for test upgrade - brief details:
1. Kernel upgraded 6.20 to 6.40 (2hours)
2. Oracle Upgrade to 10.2.0.4.0 (3.30 hours)
3. SAP UPGRADE Preparation-Apply support packages (18 hours)
4. Downtime Phase and Pre-Processing and Finalization Phase (20 hours)
5. Unicode Conversion-Taking DB Export 109GB(Almost 10% of total DB
size)(98 hours)
6. Installation of unicode system using export (95 hours)
Looking forward to hear from you.
Best Regards,
Rajeesh K.P

Hi .......
i am very sorry for late reply...............................
The time taken for test upgrade - brief details:
1. Kernel upgraded 6.20 to 6.40 (2hours)
2. Oracle Upgrade to 10.2.0.4.0 (3.30 hours)
3. SAP UPGRADE Preparation-Apply support packages (18 hours)
4. Downtime Phase and Pre-Processing and Finalization Phase (20 hours)
5. Unicode Conversion-Taking DB Export 109GB(Almost 10% of total DB
size)(98 hours)
6. Installation of unicode system using export (95 hours)
2 days downtime means the sum of time used for above 4 activities ..........................
as you suggested we can do the same 4 different down times......................
Unicode Conversion-Taking DB Export 109GB(Almost 10% of total DB size) is taking a continuous down time
of 98 hours (4.5 days ) (Activity 5)+ installation of Unicode system using the Unicode export is taking 95 hours 4.5 days
(Activity 6)
i think the we have to do activity 5 & 6 in a single stretch with out users, so it will take a continuous down time of 9 Days
With this in mind I have a few questions for you to clear a little bit more all the problem.
Q:1 Did you use more parallel jobs during Downtime than default? and I mean real Downtime where the SAP system is taken down
No.we have used default number (3 ) of parallel jobs during downtime
Did the system allow you to use ICNV (incremental converssion) for some tables?
yes we may use ICNV
Can you separate the Unicode conversion to a different weekend? or is a must for some business reason?
Yes , we can separate the Unicode conversion to a different weekend , it will not affect our business
Did you save the post download Report so you can see what are the most time consuming phases?
i am not so clear about this question , we have made an activity chart with time duration as per the test upgrade. Or how we can save the post download report from the system
Looking forward to hear from you.
Best Regards,
Rajeesh K.P

Upgrade from 46c to ECC6.0 : Java or Java-AddIn ?

Hello
Can you explain me what is the difference between Java and Java-AddIn as proposed in evaluation phsae of an upgrade from 46c to ECC6.0?
Thank You.

Hi Alain,
But if we implement a JavaAddin solution today, do you think it will be possible to create a Java instance later to create a Portal solution ?
If you implement a java addin today then you can use later for portal solution.
Regards,
Anil

Upgrade from ecc5 to ecc6 old data like PRD640_1 is still there

Dear All,
we have resent   upgrade from ecc5 to ecc6 and i have some quires regarding the datafile.
In sapdata1 -4 i see all old data like PRD640_1 i still there .Please suggest it is ok or it should not be there in the sapdata.
in db02 tablespace
PSAPEL701D
PSAPEL701I
PSAPPRD
PSAPPRD640
PSAPPRD701
PSAPPRDUSR
PSAPTEMP
PSAPUNDO
PSAPUNDO2
SYSAUX
SYSTEM
There is once more thing when i am extend the table from brtools for
BR*Tools main menu 2 - Space management 1 = Extend tablespace 3 ~ Tablespace name (tablespace) ... []
1 - BRSPACE profile (profile) ...... [initPRD.sap]
2 - Database user/password (user) .. [/]
3 ~ Tablespace name (tablespace) ... [PSAPPRDUSR]
4 - Confirmation mode (confirm) .... [yes]
5 - Scrolling line count (scroll) .. [20]
6 - Message language (language) .... [E]
7 - BRSPACE command line (command) . [-p initPRD.sap -s 20 -l E -f tsextend -t
PSAPPRDUSR]
c
c
Options for extension of tablespace PSAPPRDUSR (1. file)
1 * Last added file name (lastfile) ....... [L:\ORACLE\PRD\SAPDATA4\PRDUSR_4\PR
DUSR.DATA4]
2 * Last added file size in MB (lastsize) . [460]
3 - New file to be added (file) ........... [L:\oracle\PRD\sapdata4\prdusr_5\pr
dusr.data5]
4 # Raw disk / link target (rawlink) ...... []
5 - Size of the new file in MB (size) ..... [460]
6 - File autoextend mode (autoextend) ..... [yes]
7 - Maximum file size in MB (maxsize) ..... [500]
8 - File increment size in MB (incrsize) .. [20]
9 - SQL command (command) ................. [alter tablespace PSAPPRDUSR add da
tafile 'L:\oracle\PRD\sapdata4\prdusr_5\prdusr.data5' size 460M autoextend on ne
xt 20M maxsize 500M]
BR0259I Program execution will be continued...
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRD located on this disk volume,
missing at least 741702.647 MB
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRD640 located on this disk volu
me, missing at least 137942.647 MB
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRDUSR located on this disk volu
me, missing at least 13522.647 MB
BR0668I Warnings or errors occurred - you can continue to ignore them or go back
to repeat the last action
Please suggest what is right configuration and how to sol ther error in brtools.
Regards,
Kumar

Hello Kumar9,
if I understoon correctly your last reply, you have doubts if PSAPPRD640 should exist at all, correct?
Please do the following:
1) Check any object assigned to this tablespace PSAPPRD640
2) If any object occupied to PSAPPRD640 then reorganise to new tablespace
If any object not occupied to PSAPPRD640 then check the table entry
   a)TAORA for tablespace PSAPPRD640(if exist delete)
   b)IAORA for tablespace PSAPPRD640(if exist delete)
3) If above done then drop the tablespace through BRTools.
Best regards,
Tomas Black

Holiday calender & upgrade 4.5B to ECC6.0

Hi
There is some option to display a holiday calender in 6.0 as 4.5b ? Only a design.
Thanks,

dear JLJ
we're still on the upgrade process. i can only share with you our current condition and the lesson learnt.
we have copy production, upgraded from 4.6C to ECC6.0
and we did not face authorization issue or any other main issues in HR cause we have not yet implemented the submodules e-recruitment/ESS/other sub modules that are being enhanced in ECC6.0
our technical team did the oracle database upgrade + 4.6C upgrade to ECC6.0 right away directly after the oracle database upgrade. TST production is considered ok. we only have some minor configurations to be done.
next when our tech team upgrade the oracle database to ver. 10 in R/3 4.6C production system, and there's a time lag (interval) where our 4.6C production system not directly upgraded to ECC6.0 after the oracle database upgrade done.
and current condition - production database oracle upgraded, the R/3 4.6C Prod has not yet being upgrade to ECC6.0,
R/3 4.6C production face the authorization issue (not HR module, but other modules)
we need to check and apply sap notes/release to solve some errors in 4.6C production system and related modules settle the authorization issue. current progress is still on the technical abap preparation and functional testing.
it's been scheduled the next step - tech team will upgrade the production system from to ECC6.0 within next week. we hope all will be ok.
from this experience, my suggestion is that you need to make sure basis team have implemented sap support packages module related/ enhancement packages- latest updated one in your 4.6C system, then you also needs to check sap release notes implemented related with your module.
would you share the steps have been done in upgrading your production system in detail?
thanks and best regards,
dhenny muliawaty (pei pei)

Upgrade 4.6C to ECC6.0 IT0000 can't be overviewed, can only be displayed..

Similar Messages

Maybe you are looking for