Upgrade Sharepoint 2010 SQL Reporting Services from 2008 R2 to 2014

I'm about to do the upgrade of SharePoint 2010 Reporting Services from 2008 R2 to 2014. The instructions say it can be done "in-place" with no downtime. I've seen this article:
http://whitepages.unlimitedviz.com/2012/03/upgrading-sql-server-reporting-services-to-2012-in-sharepoint-integrated-mode/
It covers 2012 so I assume the same holds true for 2014.
I'd like to get the low down from anyone who has actually performed the upgrade of SSRS from 2008 R2 to 2014. Anyone done this upgrade? Any issues?
David Jenkins

So far I would have to say that the upgrade can be done "in-place" but there is a "DOWNTIME".
This article has helped a lot:
http://blogs.catapultsystems.com/tlingenfelder/archive/2012/07/10/upgrading-sql-server-reporting-services-2008-r2-to-sql-server-reporting-services-2012-in-sharepoint.aspx
In the article it tells you about a bug in the SQL Upgrade process where
the Domain account you use will not work. When you type in the password it fails. On top of that it will lock the Domain account because of a bad password! There is probably something wrong with the authentication process and it garbles the password.
Anyway, you end up having to change the account to the "Network Service" account before you can do the upgrade. This means the services get restarted which means???
DOWN TIME! He goes over other errors. I haven't reviewed these issues yet.
The other thing I learned is that everything needs to be SQL Server 2008 R2 SP2 in order to upgrade. You don't find this out until almost the last step in the installation process.
Now I have to wait until next week to actually do the upgrade because I have to schedule an SP2 install. :(
David Jenkins

Similar Messages

SharePoint 2013 - SQL Reporting Services Add-In

Hi,
In our old SharePoint 2010 environment the "SQL 2008 R2 Reporting Services ShrerPoint 2010 Add-in" has been installed which in turns provides the "SQL Server Reporting Services Report Viewer" web part.
I have upgraded the Farm to SharePoint 2013 and SQL 2012. Where I can get the the add-in above that is compatible with
SQL 2012 and SharePoint 2013?
I have found an add-in here for SQL 2012 and SharePoint 2010, but not sure this is compatible with SharePoint 2013...
Many Thanks,

Hi
I am also getting the below Error while testing the Content Db with SharePoint 2013 Web application.
1. Assembly
[Microsoft.ReportingServices.SharePoint.UI.ServerPages,
Version=10.50.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91] is referenced in the
database [WSS_Content_8080], but is not installed on the
current farm. Please install any feature/solution which
contains this assembly.
One or more assemblies are referenced in the database
[WSS_Content_8080], but are not installed on the current
farm. Please install any feature or solution which contains
these assemblies.
2. Database [WSS_Content_8080] has reference(s) to a missing
feature: Id = [c769801e-2387-47ef-a810-2d292d4cb05d], Name =
[Report Server File Sync], Description = [Synchronizes
Report Server files (.rdl, .rsds, .smdl, .rsd, .rsc) from a
SharePoint document library to the report server when files
are added or updated in the document library.], Install
Location = [ReportServerItemSync].
The feature with Id c769801e-2387-47ef-a810-2d292d4cb05d is
referenced in the database [WSS_Content_8080], but is not
installed on the current farm. The missing feature may cause
upgrade to fail. Please install any solution which contains
the feature and restart upgrade if necessary.
I have SQL 2008 reporting Services SharePoint 2010 Add-in.
for SharePoint 2013 we are using the SQL server 2008 Sp1. I think it is not possible to use SQL server 2012 SP1 for the report Services in SharePoint 2013.
Please suggest me to use the report services in SharePoint 2013 with Sql server 2008 SP1.
Thanks And Regards
Dileep Kumar

SharePoint 2010 and Reporting Services add-in - multiple versions supported?

Hello,
I would like to try out Reporting Services with SharePoint 2010. I already have the Reporting Services add-in installed on the WFE for SQL Server 2008 R2, but not configured.
At this point I thinking it's best to move forward with SQL Server 2012.
Can both the 2008 R2 version and 2012 version of the Reporting Services add-in exist on the same WFE in separate instances? Or do I need to uninstall the 2008 R2 version first?
Thank you in advance,

Just upgrade to the 2012 version, you don't have to uninstall first.
Also, see the supported combinations of SSRS version and Addin version:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
Use the highest version of the addin possible, as newer addins have offered performance improvements.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint 2010 - SQL Server Service Application Server Appears on Server without SSRS Installed

I have SSRS instance installed on Server 2 in integrated mode and reports within SharePoint are working as expected. But, when you go to manage the SQL Server Service Application it throws an 503 error and I believe it is related to the fact that the
service also shows up on another Application Server, Server1, that does not have SSRS installed. The service is disabled and it shows up in the list of Services for the server but I believe SharePoint thinks its the primary service and cannot access
it. Is there any way to remove the Service from Server2? I attempted the below powershell commands to remove but it gives me an error. Any suggestions would be appreciated.
Get-SPRSServiceApplicationServers
Address
Server1
Server2
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"}
TypeName                         Status   Id
SQL Server Reporting Services... Disabled a5179dce-2d6c-476b-a74b-764375d70a94
SQL Server Reporting Services... Online   64a99ed8-d31c-4dd3-b9f7-b6d946e41e16
Remove-SPServiceApplication a5179dce-2d6c-476b-a74b64375d70a94 -RemoveData
Remove-SPServiceApplication : Object not found.
At line:1 char:28
+ Remove-SPServiceApplication <<<< a5179dce-2d6c-476b-a74b-764375d70a94 -Remo
eData
    + CategoryInfo          : ObjectNotFound: (Microsoft.Share...viceApplicati
   on:SPCmdletRemoveServiceApplication) [Remove-SPServiceApplication], Invali
dOperationException
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletRemoveSe
   rviceApplication
Remove-SPServiceApplication : Object reference not set to an instance of an ob
ect. At line:1 char:28
+ Remove-SPServiceApplication <<<< a5179dce-2d6c-476b-a74b-764375d70a94 -Remo
eData    + CategoryInfo          : InvalidData: (Microsoft.Share...viceApplication:
   SPCmdletRemoveServiceApplication) [Remove-SPServiceApplication], NullRefer
enceException + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletRemoveSe
   rviceApplication

You're getting a Service Instance object and trying to remove it with a Service Application cmdlet... This won't quite work :) Can you double check to validate that SSRS 2008 R2 or higher bits were not accidentally laid down on the problem host?
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Cannot consume SQL Reporting Services 2005 webservice

Hello all,
I have seen some other postings on this subject, but no
answers anywhere.
I am trying to run SQL Reporting Services from a CF
application. The wsdl file is at
http://172.XX.XX.XX/reportserver/reportservice.asmx
When I point my browser to that page, I see the XML, so I
know the URL is correct.
When I try to consume the webservice, by either CFINVOKE or
CFSCRIPT , I get the following error:
"Could not generate stub objects for web service invocation"
We are running CF MX on Windows 2003 server.
Any ideas, references, or resources would be greatly
appreciated!
Thanks,
Kathryn

Ken,
Thanks. I do exactly that, ctrl-c to copy, ctrl-v to paste. I
can Preview the message and see the attached code, but when I click
'Reply to Topic' to post the message, I get the "page not found"
error....sigh...Thanks for trying to help....
Kathryn

Upgrade 2010 to 2013 with SQL Reporting Services

I'm getting ready to upgrade to 2013.
When I run the Test-SPContentDatabase I get:
Category : MissingWebPart
Error : True
UpgradeBlocking : False
Message : WebPart class [ab6d9dad-e23c-ce4f-ff98-f6575a1ccf4c] (class [
Microsoft.ReportingServices.SharePoint.UI.WebParts.ReportView
erWebPart] from assembly
[Microsoft.ReportingServices.SharePoint.UI.WebParts,
Version=10.0.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91]) is referenced [24] times
in the database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this web part.
Remedy : One or more web parts are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
web parts.
Locations :
Category : MissingAssembly
Error : True
UpgradeBlocking : False
Message : Assembly
[Microsoft.ReportingServices.SharePoint.UI.ServerPages,
Version=10.50.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91] is referenced in the
database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this assembly.
Remedy : One or more assemblies are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
assemblies.
Locations :
Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [is.photomask.com] web application is configured with
claims authentication mode however the content database you
are trying to attach is intended to be used against a
windows classic authentication mode.
Remedy : There is an inconsistency between the authentication mode of
target web application and the source web application.
Ensure that the authentication mode setting in upgraded web
application is the same as what you had in previous
SharePoint 2010 web application. Refer to the link
"http://go.microsoft.com/fwlink/?LinkId=236865" for more
information.
Locations :
The first two have to do with reporting services. I'm trying to workout how to go about getting these errors to go away. I don't want to remove SQL reporting or migrate a broken site and fix it later. FYI it does migrate but reporting services
is of course broken.
So what I was wanting to do was to upgrade SQL Reporting Services for SharePoint 2010 from 2008 SQL to 2014 SQL first. This would be in the hopes that it would make the migration to SharePoint 2013 work as the assemblies would change to the proper
version.
Can anyone elaborate on my upgrade path?
I'm still looking up the "Claims Based" authentication thing. I've found an article on how to migrate it so not a big deal. I do wonder however if this is tied to the issue I saw with default.aspx and home.aspx being denied to all users
after I did migrate a content db.
David Jenkins

Hi David,
The following sections describe the basic steps needed to upgrade or migrate from 2008 versions of Reporting Services SharePoint mode to 2014 version.
SQL Server 2008 R2 to SQL Server 2014
Starting environment: SQL Server 2008 R2, SharePoint 2010.
Ending environment: SQL Server 2014, SharePoint 2010.
In-place upgrade is supported and there is no down time for your SharePoint environment.
Install the SQL Server 2014 version of the Reporting Services add-in for SharePoint on each web front-end in the farm. You can install the add-in by using the SQL Server 2014 installation wizard or by downloading the add-in.
Run SQL Server 2014 installation to upgrade SharePoint mode for each “report server”. The SQL Server installation wizard will install the Reporting Services Service and create a new Service application.
If you also want the ending environment to run SharePoint 2013, you need to complete a database-attach upgrade of the SharePoint 2010 to SharePoint 2013.
For more scenarios information, please refer to:
http://msdn.microsoft.com/en-us/library/ms143747.aspx#bkmk_sharePoint_scenarios
Per the supported combinations of SharePoint and Reported Services Components, I’d recommend you firstly upgrade Reporting Services to 2014, then upgrade SharePoint to 2013.
For more information:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
The link below is the reference for migrating a Reporting Services:
http://msdn.microsoft.com/en-us/library/hh759331.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Installed SQL Reporting Services 2012 on SharePoint 2013 Server. SQL Reporting Service not available In the list of runnning services or new service applications

Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
4 WFE's
4 App Servers (NLB Central Admin x 4 servers)
4 App Severs for SSRS (Light limited SharePoint services running)
I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
Reporting Services.
I have ran the following commands in the SHarePoint management shell:
Install-SPRSService and Install-SPRSSeviceProxy
and
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
The reply was that the service was already online on the server.
So in powershell all seems ok but it does not appear in central administration.
I have also moved Central Administration to the SSRS SharePoint server too.
Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
I guess my next attempt is to install SSRS on an app server with central administration hosted.
Thanks

I had the same issue on 2 different environments.
I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
Since then I always install SSRS on the server which hosts Central Admin. No issues then.

Remove Corrupted Sharepoint SQL Reporting Services

Hi,
I had my sharepoint 2013 foundation with sharepoint-SQL reporting services integrated removed from my server 2012. And I removed my sharepoint folders and regedit files for sharepoint manually to ensure complete uninstallation of sharepoint from my server.
But now I did a reisntall of sharepoint and it works completely fine, but when I tried to install the reporting services again I cant as it says it is already installed but the service is not listed in my sharepoint Services list and when i tried removing
the reporting service using the SQL installer from control panel it exits with an error
Action required:
Use the following information to resolve the error, and then, try to uninstall this feature again.
Feature failure reason:
An error occurred during the setup process of the feature.
Error details:
§ Error installing SQL Server Reporting Services
There was an error attempting to remove the configuration of the product which prevents any other action from occuring. The current configuration of the product is being cancelled as a result.
Error code: 25012
Log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150220_144131\sql_rsshp_Cpu64_1.log
Visit http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_rsshp.msi%40Sqlmsirc_NotifyFeatureStates_64%4025012 to get help on troubleshooting.
§ Error installing SQL Server Reporting Services
Install-SPRSServiceProxy : The term 'Install-SPRSServiceProxy' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.At
line:1 char:35+ & {$DebugPreference = 'Continue'; Install-SPRSServiceProxy -uninstall}+
~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (Install-SPRSServiceProxy:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException
Error code: 0x80131500
Visit http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x6A1944E2%400xC68B78F0&EvtType=0x6A1944E2%400xC68B78F0 to get help on troubleshooting

Install the sharepoint reporting services add-in to the exact same drive where you installed it before using the MSSQL installation file, now uninstall the add-in and the reporting service feature from the control panel. This will remove the corrupted
files completely and now do a fresh installation

Sharepoint SQL Reporting Services Add-In

Hi,
I have installed the Sharepoint SQL reporting services Add-in in one of my application servers and when I call the sites created from the application server itself they show the add-in feature in them in the "site features "list. But when I call
the same site from a WFE in the farm with no add-in installed the the site doesn't show the add-in feature in the "site Feature" list.
This is not supposed to happen as I have tried the same in another farm and the add-in was needed to be installed only in the application server and it would automatically be shown in sites even when they are called from a WFE or anywhere.

SSRS in SharePoint Integrated mode requires the installation of two components. SSRS in SharePoint Integrated mode only needs to be installed on one App server. But the SSRS SharePoint Add-in needs to be installed on all the WFEs and the app
server where SSRS in SharePoint Integrated mode is installed. Not sure how you got it to work in the other farm. Take a look at the following article:
https://msdn.microsoft.com/en-us/library/hh479775.aspx
You will note in the diagram that the Add-in is installed on each WFE.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

SharePoint 2013 and SQL Reporting Services Integration Mode

I'm setting up a production environment with SQL Server 2012 SP1 (Clustered) and SharePoint 2013.
I successfully setup the integration using PowerShell (Install-SPRSService & Install-SPRSServiceProxy). I can see the SQL Reporting Service on the CA Services and it's started, I've also created the Services Application without any issues (And linked it
to my web application). However the Report Server Integration feature is missing from my site collection and so are the content types. I even tried creating a new site collection and no dice.
Appreciating any help.
Best,
MI

Hi MI,
As per my understanding, I think this issue is caused by you haven’t install the Reporting Services add-in for SharePoint Products or is not installed correctly. If we install the Reporting Services add-in for SharePoint Products after the installation of
the SharePoint Server, then the Report Server integration feature and the Power View integration feature will can be activated for root site collections. For other site collections, we can manually activate the features. To fix the issue you occurred, we should
install or reinstall the Reporting Services add-in for SharePoint Products.
For more information about Install Reporting Services 2012 SharePoint Mode for SharePoint 2013, please see the following article:
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Expand and Collapse(+/-) option in a Matrix SQL Reporting Services 2008

Hello All,
I am having Expand and Collapse(+/-) option in a Matrix SQL Reporting Services 2008. It's not working when it is havnig a Row Group and Column Group.
Does reporting services has this flexibulity?? It's working fine if it's only have a Row Group an it's not working if it is having Row and a Column Group. Can any one suggest how to work aroung with this.
any help much appriciated.
Thanks & Regards,
Jeevan Dasari.
Dasari

Drill-down feature is a basic requirement, it is concluded in Reporting service from SSRS2000 to SSRS2008 R2, To
your scenario I think the root cause is relevant to your incorrect steps. Please follow the steps below and then give the feedback:
1.     Right-click the child groups in the
Row Groups panel which is at the left-bottom of the BIDS, and then select
Group Properties…
2.
Switch to Visibility tab, and then select
Hide Radio-button, click the checkbox of Display can be toggled by this report item.
3.
Then select the parent group datafield in the drop-down list.
4.
Click OK.
Thanks,
Challen Fu
Challen Fu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

SQL Reporting Services stops on my SharePoint 2007 Moss environment?

Hi,
I have SharePoint 2007 Moss SP3 installed on my VMWare server. I have a separate database VMWare server. I have SQL Server Reporting Services configured. Every other day the SQL Reporting Service stops, it seems to time out and logs a 7031 windows event.
I've had to create a scheduled task to restart this service every day at 4am. The OWSTIMER process consumes around 50% CPU. Any solutions for the above?
Thanks.

Hi AspNet-Scotland,
The application pool for Central Admin might be timing out, increasing the shutdown time limit for the process model from the default of 90 seconds to something longer (300 seconds) should resolve it if the cause is time-outs.
This post explains how to change the Shutdown Time limit:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=20
scroll down about half way on the post, or search for High level steps,
Cheers,
Stacy Anothersharepointblog.blogspot.com

SQL Reporting services installing sharepoint mode - Error while installing

Hi I have SharePoint 2013 environment and now i am trying to install SSRS sharepoint mode.
I use SQL server enterprise version 2012 SP1.
While installing this i got and error at the end.
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
Could not load file or assembly 'System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
1- Now i am not able to uninstall this
2- I also don't see the service application in Central admin under New.
Please help me to resolve this issue.
My name is yogendra

Hi,
According to your post, my understanding is that you failed to install SSRS sharepoint mode.
Please make sure you install Reporting Services SharePoint Mode for SharePoint 2013
correctly.
You can refer to:
Install Reporting Services SharePoint Mode for SharePoint 2013
Installing and configuring SQL Reporting services on SharePoint 2013
In addition, please install Windows Management Framework 3.0 on the
build server.
More information:
Exception
Message: Could not load file or assembly 'System.Management.Automation, PublicKeyToken=31bf3856ad364e35'
How to use SQL Server in Windows and Windows Server environments
Best Regards,
Linda Li
Linda Li
TechNet Community Support

We are using SharePoint 2010 server with service pack 1 want to remove/delete old user profiles & site from server

Hi Team,
We are using SharePoint 2010 server with service pack 1, we want to remove/delete old user profiles, access & site from server
is there any script or feature available using that we can only remove dactivated/deleted/old user profiles, access & site.
Thanks
NPratik

Take a look at Metalogix ControlPoint, which will compare user accounts on SharePoint to Active Directory and remove accounts that no longer exist in AD (or are disabled).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Migrating reports from MS SQL reporting services to BO(Crystal reports)

Hi Folks,
I am looking to migrate my existing reporting application to BOXI and crystal reportsXI. The current reports application is build on Microsoft SQL reporting services platform. I have thousands of reports in the application and am looking for a solution to migrate all these existing reports into BO compatible format, i.e., .rpt format.
Anyone with previous experience of this kind of migration/conversion for suggestions on the quickest and most cost effective solution.
I do not want to be developing all the reports again on BO.
Appreciate any kind of assistance on this.
Thanks,
Shetty.

Hi Tim,
Thanks for the reply.
I searched the forum and found the link to [url|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/BOE_SDK/boesdk_java_dg_doc/doc/boesdk_java_dg/URLreporting_new.html] which specifies the process to use URL Reporting for Crystal Reports . But to implement this we have to change the architecture of our existing application as presently we are directly accessing the report in URL to run the report. I was not able to found any solution that implements this architecture.
Does Business Object Enterprise 11.5 still supports this architecture?
If we use the architecture specified in the above URL for URL Reporting for Crystal Reports then how we can migrate all our reports to BOE 11.5? We have to use the Publish Wizard for that, to get the ids for our reports?
There was a parameter APSTOKEN how can we get a token. Can it be a static token that can be used by all the users to access the reports?
Thanks!

Upgrade Sharepoint 2010 SQL Reporting Services from 2008 R2 to 2014

Similar Messages

Maybe you are looking for