Upgrading my 320G to a 1TB

Is it possible to bring my iMac to an authorized dealer and have them replace the 320G internal drive with a 1TB?
Sean

If you use the internal drive as your start up drive and then save documents on the external drive then you are saving space on the internal drive and can use it for whatever you want. Personally I keep things files valuable on my external drive (photos, music and sensitive documents) I would recommend against using a USB 2.0 drive for and external storage drive especially if you will be accessing it a lot. I would recommend a FW or preferably a FW 800 drive, you will find the IO speeds of FW800 far superior to USB 2.0. OWC's Mercury line and Lacie Quadra D2 line are both highly recommended on this forum. Both have USB, FW and FW 800 connections and both also have eSATA however the iMacs don't have an external eSATA port. If they did have an eSATA port I'd recommend using that as it's IO is even faster than FW800.
Regards,
Roger

Similar Messages

I want to upgrade my Hard Drive to 1TB and more. What is the maximun Hard Drive I can install for a MacBook Pro 2009 Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back

I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?

The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

Is there a way to upgrade the 512GB hdd to 1TB on a 2011 mbp under applecare so that the applecare is not voided?

Is there a way to upgrade the 512GB hdd to 1TB on a 2011 mbp under applecare so that the applecare is not voided?
I am currently using Mavericks.

A hard drive replacement doesn't void warranty on a MacBook Pro, so you can replace the hard drive without worrying about its warranty. However, you have to be sure of what you are doing, because if you damage any part, you will void warranty.
First look for a hard drive. I recommend you to visit OWC for hard drives > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ 7200 rpm hard drives will give you extra performance.
Then, just reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 Hold Command, Option (Alt) and R keys while your Mac is starting, format the hard drive with Disk Utility and reinstall OS X or restore a Time Machine backup

Noob here, wanting to upgrade my MBP HD to 1TB.

So I'm looking to upgrade the internal hard drive of my February 2011 13.3" Macbook Pro. It's 2.70GHz i7, 8GB RAM, current 500GB HD. Does anybody know what a good option would be? Preferably under $100, unless you can convince me that a more expensive one is worth the price difference
I also read a bit that some hard drive upgrades can slow down the computer, which I'd like to avoid as much as possible. But yeah, I just really don't know much on this stuff, so any help would be awesome.
Cheers!

Any 2.5" SATA Hard Disk Drive that is 9.5 mm thick will work in your MBP. HGST and Seagate have performed well for me. I have several 1 TB HDDs from each of those manufacturers. Look at this link for possible selections:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Though a HDD with a faster rotation will enhance performance, it will not be as great as the speed differential suggests. A 5400 rpm will be satisfactory if the budget is tight.
Ciao.

Upgrade my 750gig drive to 1TB ?, what should i get ?

Hi my MacBookPro is an early 2011 15"screen, it came with a 750gig hard drive 5,400rpm fitted as standard.
I am thinking it is easy enough to change to 1 gig capacity, i have replaced my 2 times 2gig ram with 2 times 4gig a few months ago.
I am sure i need a 2.5" SATA type of drive, but are all the drives that meet with this criteria suitably compatible.
then there is the matter of re-installing Lion and tranferring all my STUFF !, but i shall get the drive first LOL.
tim

timmy toad wrote:
but i also phoned up Apple Care and spoke to a chap at the Apple Store who said that "it was not possible to change the hard drive"
That person was rather misinformed and shouldn't be working for AppleCare. The only time you might, and I say "might", see a decrease in battery life is with a 7200 rpm hdd vs a 5400 rpm hdd, and even then the battery life difference would be negligible, maybe 10 less minutes. Also, I have not seen a 2tb internal hdd for laptops for sale yet.
furthermore, if it is also EASY to transfer my Data as well, itll be even better. thanks.
It's super easy. First, purchase an external hdd enclosure (like this one). Install the new drive in it and plug it into the usb port. In disk utility, select the drive, erase it, and format it to Mac OS extended (journaled). Download a cloning program, such as CarbonCopyCloner and run the program. It is making an EXACT copy of the current internal drive to the new one in the case. When done, swap drives and happy computing. Make note that you will need any product activation codes if you have software installed that required it (MS Office for example).
Also, regarding that you need to keep a certain percentage of your HDD free. That was true in ye olden days when HDD's were say 40 gb. But with todays laptop hdd's having 1tb capacity, you do not need to keep at least 200 gb free for your system to run smoothly, that is a ridiculously high amount of free space.

Brand New iMac 24" internal or external hard drive upgrade to 1TB?

I just purchased a brand new iMac 24" MB325LL with a 320GB hard drive. I currently have 432GB of data on my PC and I would like to upgrade the hard drive to 1TB. I have 2 options and I need your advice:
Option #1 » Cost:CDN*$255*
Buy a Samsung Spinpoint F1 1TB from DirectCanada.com for CDN$155 (tax+shipping included). Get it installed by a certified Apple technician for CDN$100 in Toronto. I doubt I can get it installed for a lower fee.
Option #2 » Cost:CDN*$317*
Buy a LaCie D2 1TB external hard drive with Firewire 800 for CDN$317 (tax+shipping included) either from a U.S. retailer (e.g. iUnitek) or a Canadian one. Prices at Canadian online retailers start from CDN$266 + CDN$37 (13% tax) + CDN$18 (shipping) = CDN$321, which is just CDN$4 more than in the States, taking into account the exchange rate.
So, there you. From the financial point of view, the incentive is to get an internal hard drive, which I don't mind at all. I'd like to install Vista on a 30-40GB partition, if that makes a difference. If I were to get an external hard drive, I would keep all of my data (e.g. music, movies, documents, music, etc) on it and reserve the internal 320GB hard drive for system files and OS.
What would justify paying a premium for an external hard drive other than portability? If I were to get one, I would need to be able to access it not only from my iMac's Vista partition, but also from my HP Vista laptop. Same applies to the internal hard drive. If I were to get a Samsung F1, I would still need to access my mac files from Vista's partition (when I boot into Vista) as well as from my HP Vista laptop (over wi-fi). FYI: I have no use for Time Machine, since I've never deleted a file which I needed to recover..well, maybe once or twice. What I DO need is a utility to synchronize files across machines. Hence, I will need some kind of program to automatically sync my iMac files with my HP laptop files. Currently, I utilize SyncBackSE to sync files between my HP laptop and my PC over Wi-Fi every morning at 6am. Works like a charm.
That's my dilemma in a nutshell. Any comments, suggestions and words of wisdom are welcome.
P.S. I'm also planning on upgrading RAM to 4GB. Newegg.ca is running a promotion (http://www.newegg.ca/Product/Product.aspx?Item=N82E16820227251): $72 CDN minus $20 USD mail-in rebate. It's not related to my question in any way, but some Canadians might find this info relevant.

Well, I don't have the budget for both and as I've already pointed out, Time Machine does not address my needs. It's a great backup solution, but what I need is a synchronization solution. I need to have the same versions of basic files, such as music, photos, documents, and other miscellaneous stuff on my iMac and my HP Vista laptop. Even if I were to get a MacBook in the future, I would still need the same set-up. That way, if something happens to either my iMac or my MacBook, I would always be able to simply copy-paste files from one machine to another. That's, sort of, my version of a perfect backup solution...unless, there's an option to load up files from a Time Machine backup onto a separate one (e.g. MacBook). In the end, Time Machine only partially addresses my need in keeping 2 machines backed up in a sense that it only backs up one of them. My solution kills 2 birds with one stone. I would have 2 syncronized computers (e.g. iMac + HP Laptop, iMac + MacBook) AND both computers would serve as mutual backup sources, since whatever happens to one of them, I would always be able to copy data from the other.
The problem arises when I factor in the sheer number of gigabytes required on the portable computer to mirror everything from the iMac, whether be it a Windows laptop or a MacBook. I would always have more data on my iMac than the available space on a smaller hard drive. I now have 432GB of stuff and I can presume that this number will only grow. Hence, at any given time I would be able to synchronize only the most essential files to the laptop. Ideally, I would need a NAS which would collect = synchronize data from both machines. That way, whenever files get modified, changes would automatically be transferred to the NAS and routed further down the chain to the iMac. It would work both ways, obviously. In that scenario, I don't need to worry about any of the computers, since whichever one fails on me, I would always have a copy of the entire collection of files. Now, that I doubt Time Machine can accomplish.

I am having a new hard drive put in today and am upgrading to a 1tb. My time machine is only a 500gb will it still back up my files.

Will my 500 gb time machine still back up my files after I upgrade my imac to a 1tb hard drive?

Once your internal data exceeds the capacity of the Time Machine volume, you won’t be able to do a complete restore of your internal drive from that Time Machine backup. The Time Machine Preferences does offer an Options button that you can click to exclude files and/or folders from the Time Machine backup. For example, if you have a few hundred gigabytes of original captured video, you may not want to back those up but only the final version of the video that you edited. Or if you have an extensive iTunes collection, you may not back up the music because it is possible to restore that from other sources.
You have an option that might simplify your problem and that is buy a one or two terabyte disk to use as your external disk for Time Machine. The current 500 GB disk could be retained perhaps as a network drive or other external storage perhaps for those iTunes disks you’ve ripped or those original video capture files. This is the simplest and most trustworthy solution if it’s feasible given your data needs.
If you are reluctant to add another external drive at this time, when you get the new 1 TB drive, you could consider partitioning the larger internal drive into at least two partitions, for example a BOOT drive and a DATA drive. You could then install the operating system on the BOOT drive and put lots of things you create there as well and let Time Machine back that up. The DATA drive could be reserved for those things that are not so critical that you have a ready backup as mentioned above. The size of the BOOT drive could be 450 GB and then your external drive will have some breathing room for the Time Machine backups as Allan indicated.

Macbook Pro freezes after upgrade to WD 1TB (WDC WD10TPVT-00HT5T1)

Hi All,
I upgraded my Macbook Pro to 1TB of sweet space. I choose to upgrade to Western Digital 1 TB. Got it from Amazon and following are the drive details:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10TPVT-00HT5T1
Revision: 01.01A01
Upgrade was simple enough as the steps are well documented on multiple sites. I chose to install fresh copy of Mac OS from Install DVD. I migrated applications and documents using MacOS Install System Wizard. Everything went fine and I started enjoying this massive space available at my disposal.
Problem started happening when my laptop freezes regularly (every 30 minutes or so). It recovers after 30 secs period. I went through multiple discussions but could not find any mention of it. All 1TB owners are happy and never reported this problem. I started digging in OS logs and found following log:
+Dec 5 08:04:53 macbook-pro smartd[47]: Device: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice, failed to read SMART Attribute Data+
+Dec 5 08:34:53 macbook-pro smartd[47]: Device: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice, failed to read SMART Attribute Data+
+Dec 5 09:04:53 macbook-pro smartd[47]: Device: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice, failed to read SMART Attribute Data+
+Dec 5 12:14:02 macbook-pro smartd[47]: Device: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice, failed to read SMART Attribute Data+
Next time when my laptop froze, I found same line is system log. I decided to run SMART tests on my drive. It reported SMART is disabled on my new drive.
I enabled it using following commands:
+smartctl -s on /dev/disk0+
+smartctl 5.39 2009-12-09 r2995 [i386-apple-darwin10.4.0] (local build)+
+Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net+
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
I am still facing the same freezing problems. I tried running some SMART tests and here is the output:
+sudo smartctl -T permissive -a /dev/disk0+
Password:
+smartctl 5.39 2009-12-09 r2995 [i386-apple-darwin10.4.0] (local build)+
+Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net+
+=== START OF INFORMATION SECTION ===+
+Device Model: WDC WD10TPVT-00HT5T1+
+Serial Number: WD-XXXXXXXXXXXX+
+Firmware Version: 01.01A01+
+User Capacity: 1,000,204,886,016 bytes+
+Device is: Not in smartctl database [for details use: -P showall]+
+ATA Version is: 8+
+ATA Standard is: Exact ATA specification draft version not indicated+
+Local Time is: Sun Dec 5 12:43:23 2010 GMT+
+SMART support is: Available - device has SMART capability.+
+SMART support is: Disabled+
+Error SMART Values Read failed+
+Smartctl: SMART Read Values failed.+
+Error SMART Thresholds Read failed+
+Smartctl: SMART Read Thresholds failed.+
+=== START OF READ SMART DATA SECTION ===+
+SMART overall-health self-assessment test result: PASSED+
+General SMART Values:+
+Offline data collection status: (0x00) Offline data collection activity+
+ was never started.+
+ Auto Offline Data Collection: Disabled.+
+Total time to complete Offline+
+data collection: ( 0) seconds.+
+Offline data collection+
+capabilities: (0x00) Offline data collection not supported.+
+SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented.+
+Error logging capability: (0x00) Error logging supported.+
+ General Purpose Logging supported.+
+SCT capabilities: (0x7035) SCT Status supported.+
+ SCT Feature Control supported.+
+ SCT Data Table supported.+
+Error SMART Error Log Read failed+
+Smartctl: SMART Error Log Read Failed+
+Error SMART Error Self-Test Log Read failed+
+Smartctl: SMART Self Test Log Read Failed+
+Device does not support Selective Self Tests/Logging+
It still report SMART is disabled and lot of tests failed.
I then tried Smart Utility and I ran short tests using it. It got stuck and I had to cancel the test. I got following message in system log.
+Dec 5 14:12:45 macbook-pro SMART Utility[1828]: smartctl returned error message: A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.+
Is somebody else experiencing this issue? I will be really thankful if somebody can help me to figure out the problem and potential solution.
Thanks

No idea what's wrong with your drive, but the best thing to do is to bug Western Digital about it. Be sure to have the serial number when you call. they can help you to troubleshoot it, and if they determine it is faulty, they should replace it under warranty.
I've not heard of this kind of problem before. How did you format it?
If this drive has the built-in shock guard technology, there may be a conflict with Apple's built in Sudden Motion Sensor. If so, you can disable the Sudden Motion Sensor and see if this helps:
http://support.apple.com/kb/HT1934
Good luck!
Message was edited by: S.U.

MBP mid-2009 Freezing after Hard Drive upgrade -HELP!

So, my Apple Care just ended and I was almost always at a full 320GB, so I decided to upgrade my hard drive to 1TB. I purchased a Western Digital TB drive (9.5mm) at a store recommended by an Apple Genius and followed the instruction on youtube exactly, as well as having another visit to the Genius bar, ensuring I grounded myself often throughout the process. My computer is a 15" MBP originally loaded with Snow Leopard, now running OSX Lion. I did a Time Machine backup prior to everything and also bought an enclosure for my old hard disk to use and it has yet to be wiped, but Disk Utility says that it's corrupt because 1 program's debug log says the number of files changed (after the time machine processing.) I did a Carbon Copy Clone prior to installing the hard drive as well, so when all was done, I was able to start the computer without issue. (This program is what told me first that I had an issue with that debug log. I'd tried to delete a huge folder that was taking up nearly 30GB before the clone, it was backed up on time machine and another backup drive.)
However, after Vuze re-opened (which I'd just recently upgraded to Pro) it froze the computer, so I got the rainbow disk and even Force Quit did not work. Since then, I've had to reboot with the top right button dozens of times. Mail, Chrome and Vuze have all caused freezing and Command Option Escape does not work at all. My beloved computer is starting to feel like a big brick. I uninstalled and re-installed Vuze Plus since, but still have the same issues (trashing the program then re-downloading). As for Disk Utility, it says the drive is just fine. There are no software updates needed and that's about as far as I can get before things crash again.
I would really appreciate any assistance that can be provided based on this scenario. I hope I've provided enough detail, please let me know if more is needed.
Thank you in advance.

The only thing that I can think of is that your SATA cable may be bad... it's the first thing that I would try replacing. DIsk Utility wouldn't be able to detect a bad SATA cable - you'd just have random freezes and crashes.
I don't know that this is the solution to your problem, but it's the first thing I would attempt. 2009 models are notorious for having bad SATA cables - try PowerbookMedic and order a new one. If it doesn't fix the problem, call back.
Good luck,
Clinton

Upgrade or replace mid-2009 MBP for 4 year doc program

My question:
I'm new to this forum - thanks in advance for your help!
I love my 5 year old MBP, and I loved the one I had for 5 years before it. I assumed I would buy a new one for this doctoral program that starts in 10 days, which I expect will take 3-4 years to complete. I am flummoxed by what Apple has done with the MBP line (SSD drives with tiny storage capabilities, retina displays I worry will prompt massive storage needs as apps upgrade to take advantage of them, and most offensively the soldering of HD and RAM to the motherboard), and really questioning whether any of the machines they are now selling will be useful to me during my 4 years at school. I am leaning toward buying the maxed out version of the last non-retina model while I still can.
Should I upgrade my existing machine (hard drive, OS, what else?) or buy that last MBP model that isn't soldered shut before they discontinue it (and maybe upgrade it anyways)? Will the new machine be significantly better, or even more upgradeable, than my current one?
Concerns that make me hesitate to buy a new machine:
Hard drive size and upgradability: This is by far the biggest issue. My current machine's hard drive is overloaded and I think that's the biggest problem for performance right now. I refuse to pay through the nose for a way-too-small (smaller?!), non-upgradable, hard drive, no matter how fast it loads entertainment apps. This is my only computer and I will not carry around a separate storage drive. The retina machines are not an option for me for this reason (I'm also anxious about the upcoming storage demands for apps with retina capabilities). I made peace with the idea of having a separate external optical disc drive, but that's pretty awkward when I want to watch a movie in bed or on a plane!
What has the MBP lost since 2009?: I think I read something about the current MBP model not having speakers - I love my speakers! They aren't necessary to do my schoolwork, but I love them just the same. What else has disappeared on the MBP since 2009? I'm paranoid that I may have missed other changes since it's been so long since I paid attention to the product line.
Value for the money: If I'm going to spend $1,300+ on a machine I expect significantly better performance. I can't tell if the newer machine with it's faster (though not as fast as the retina machines) processor will be much faster, or much better in general. Buying it basically saves me the trouble of figuring out all of the details for how to upgrade my current machine, which is worth a lot to me. But will the new machine really be better? How so? By how much? Will I be able to upgrade it in the future beyond what Apple offers now (1TB hard drive/512 GB SSD), OSx Mavericks, 8GB RAM, Intel Core i7)? If it is really going to be better or offer more longevity, I'll snatch one up in a heartbeat, because I expect it will be a couple years before those SSDs are big enough to satisfy me. And I'll let Apple max it out for me for $300 because it will save me the trouble of doing so while I'm preparing for school.
Retina second thoughts: Am I crazy for not wanting the retina machine? Maybe I should wait for the SSD to come down in price so one of those machines are more practical (though still not upgradable?!). Or even get one with 512 GB SSD and plan to upgrade in 2 years?
Refurbished option: Should I look for a refurbished non-retina 15" MBP? I like the 13" screen, but think there were bigger upgrade options on the last 15" one.
About my current machine:
I bought my baby new in 2009 for my master's program and he has been incredibly good to me. My only regret now is that I didn't upgrade to the fastest processor at that time - if I had I wouldn't be posting this because I'd just be upgrading. He started slowing down around 2011 so I upgraded the RAM, OS, and I think even the Hard Drive (80 to 160GB?), and at that time I got a new battery and power cord due to a recall. 10 months ago I took him in because he had become painfully slow and the Genius re-installed my OS, but I have noticed a bit of that slow-down returning lately. Google Chrome, Google Apps, MS Office, and iTunes are by far my most used apps, but I do like to open a million tabs in Chrome at once while doing research. I value his speakers because I love music but I do have speakers at home so maybe speakers aren't necessary? He has been tossed around quite a bit - I bought him a neoprene sleeve back in the day but never actually used it and he's definitely taken some nasty spills without any protection.
Complaints about my current machine:
Hard drive storage: My biggest issue is that I had a huge surge in data storage (video and photo for a special project) over the past year and didn't take the time to upgrade his hard drive to make space, so now I have a mess of data in a borrowed iPad and multiple external drives. I want to dump all of that onto the same machine, and it easily fits onto a 1TB external drive, but I do not want to keep it there indefinitely. I like having all of my storage on one machine and I am not ready to buy into the cloud beyond Google Apps. Can I upgrade my hard drive to 1TB or even 500MB? How much does that cost, and what else in my machine will be affected by this change? Should I be looking at SSDs? What are the implications for going that route? Where would it go physically and what would I be giving up?
Speed: He is a little bit laggy sometimes, especially when I open a million tabs on Chrome when I'm researching. I don't switch back and forth between a ton of different programs so startup speed doesn't bother me a ton, but he is a little slow there too.
Battery life: It isn't awesome. It's sufficient but waning for sure.
I spilled water on him: This just happened recently and right afterward I noticed that the track pad is a bit buggy now. It is just a little off of what I expect it to be and sometimes refuses to let me navigate. I haven't tried my wireless mouse since that happened but I imagine that will work fine, and I'm hoping it will go back to normal (open to suggestions to fix that for sure!) soon.
Google Chrome crashes: This has been recent. I've had 20+ tabs open and seen crashes somewhat often. I didn't have this problem before.
He runs hot: I think this is worse since the 2011 upgrades, but honestly doesn't bother me as long as he's safe to use.
He runs loud sometimes: I can hear the fans pick up and kick in sometimes when he's working hard, but it doesn't bother me too much.
Glossy screen is obnoxious: I never bought an anti-glare screen cover to deal with this as I had originally planned. And no, I still don't want a retina MBP.
Possible physical damage from rough handling: I have been rough with him over the years without a case and I worry that he is on his way to some type of physical damage that hasn't shown up yet.
My current machine:
13" MacBook Pro Mid-2009 Model
Processor 2.26 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
2X Size: 4 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Graphics NVIDIA GeForce 9400M 256 MB
Serial Number WQ9240Y466D
Software OS X 10.8.5 (12F45)
NVidia MCP79 AHCI - Hitachi HTS545016B9SA02:
Capacity: 160.04 GB (160,041,885,696 bytes)
Model: Hitachi HTS545016B9SA02
Full to the brim and overflowing
Running OSX 10.8.5
I am considering purchasing this machine:
MacBook Pro, 13-inch Item Price: $1,319 (This is the education pricing for this model, plus I would buy seriously discounted AppleCare and MS Office)
Available to ship: 1-3 business days
Hardware
2.9GHz Dual-core Intel Core i7, Turbo Boost up to 3.6GHz
8GB 1600MHz DDR3 SDRAM — 2x4GB
1TB Serial ATA Drive @ 5400 rpm
SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
Backlit Keyboard (English) & User's Guide
Accessory Kit

Whygirl,
it reads as though an internal disk upgrade (and possibly a battery replacement) would suffice for you, and those two together would be far less expensive than a new MacBook Pro. Yes, you could install either a HDD or a SSD in place of its current internal HDD. You could look at the Hitachi Travelstar 7K1000 as an example of a suitable 1 TB HDD; SSDs are more expensive per unit of storage than a HDD, but might be worth the extra cost if your apps are disk-bound. (I put a Samsung 840 PRO into my 13-inch Mid 2010 model, and it’s been working well.) Note that Chrome might be responsible for the extra heat (and the extra heat is responsible for the increased volume from the fans kicking in); Chrome isn’t optimized for use on 64-bit versions of OS X, like 10.8.5.

Hard Drive and memory upgrade on macbook pro (13" mid 2009)

I want to upgrade my current hard drive and memory (currently 250gb and 4 gb) but i'm having trouble to find out which one is going to fit.
I considered buying this ones
http://www.bestbuy.com/site/Western+Digital+-+Scorpio+Blue+1TB+Internal+Serial+A TA+Hard+Drive+for+Laptops/9960668.p?skuId=9960668&productCategoryId=pcmcat189600 050008&id=1218253425468
http://www.bestbuy.com/site/Kingston+Technology+-+4GB+PC3-8500+DDR3+SoDIMM+Lapto p+Memory/2129381.p?skuId=2129381&productCategoryId=abcat0506002&id=1218404812331
Any ideas?

OWC is a reputable supplier of hard drives and RAM upgrades to the Mac community.
Go to their site, lookup your model MacBook Pro and see what upgrades are available.
The 1tb WD Scorpio Blue is a 5400rpm drive and slower than the crop of 7200rpm drives.
Do you need space over speed?

Mb881 how big of a hard drive will work? Will a 1tb hard drive work?

Im looking at getting a MB881 but the 120gb is way to small so I would upgrade I'm thinking a 1tb. Will it properly read the 1tb hard drive? What is the max haEd drive size that can go in a MB881 Macbook?

Hi, letmeno. If your 667MHz Powerbook has a DVI video-out port, it will format a nominal 160GB drive to its actual capacity (about 149GB) and use it happily, without any other limitations.
If you have the 667MHz model with a VGA video-out port, only 127-128GB of a 160GB drive can be recognized in it, and the last 20GB of the drive's actual capacity will be unavailable. Partitioning the drive has no effect on this hardware limitation.
A 120GB drive (the next size down) has a formatted capacity in any machine of about 111GB, so a 160GB drive actually provides a significant increase even in a Powerbook that can't use the whole drive. If you have the VGA model, and the difference between 111GB and 128GB is worth the difference in price between a 120 and a 160GB drive to you, go ahead and install a 160. Otherwise, even a 120 would certainly be a huge improvement over a 30.
If you do buy a 160, any later Powerbook or other recent Mac model will be able to reformat it to its full capacity. Whenever you move on to a newer Mac, you can just mount the 160 in an external enclosure for continued use, put the 30 back into the Tibook, and sell it or give it away.

Can I upgrade my hard-drive in my iMac 7,1

Hello, I have the mid 2007 released intel based imac. I am about to change my 1GB memory to 4GB memory per the info I found on the Apple support site (upgrading memory on mid 2007 imacs or later). I also want to upgrade my hard-drive to 1TB as I need more storage and already using 2 1-TB externals for pics and other misc files that take up too much space. My husband says he doesnt think it can be done and I might as well suck it up and buy a new imac already with the specs I want. I am considering this but am so attached to my current imac (my first ever) that I would prefer to upgrade if possible before just jumping into a new one. My 2 questions are...
1) can my harddrive be upgraded to 1 or 2TB? If so, should I pay someone to do this, meaning is it difficult?
2) Does Apple do this and how much would this typically cost me? Do you think it is smarter to just trade this old one in for a new one?
Thanks,
Lani
2)

Yes, they are upgradable, and it isn't nearly as hard as the other posters will have you believe.
If you have the aptitude to do surgery on computers than yes this might be correct, however if you don't I think it would be difficult and not recommended.
Here is one site that shows how to do it, if you feel comfortable doing this type of work there you go. Oh one last thing if you have any AppleCare remaining this would certainly void it.

Upgrade 2009 Mac Pro Hard Disk to a larger Hard Disk

Hi there, I am looking to upgrade my 2009 Mac Pro 1TB HDD to a 3TB HDD. I have a successfull Time Machine Backup, If I swap the HDDS, boot into OS Snow Leopard, format the new 3TB then restore from a TM backup, will it account for the new extra space? E.g, will I see a full 3TB (or there abouts) as usuable or will I see a kind of 1TB Partition with the same free space I had before, requiring the use of something like Disk Utility to Extend it? Any help would be appreciated! Many Thanks!
Ash

Still on Snow Leopard so yes.
My advise: use two drives: leaving your current as is.
One for system, second for data.
Also invest in Carbon Copy Cloner and you can also make a bootable copy, and selectively copy system and user or just system etc. and have it for doing quick smart backups and use for data volumes as well.
Many 3TB drives are slower than 7.2K desktop or enterprise and "green" which can be useful for backups.
3TB might be better for a new TimeMachine backup drive.
Yes DU will present full 3TB (you aren't doing a sector copy)
I aim to use 50% of a drive.
If you can, then invest into a small fast SSD like Samsung 840: $89 120GB is fine for most everyone, or 250GB. Then use some WD Black 2TB or larger for media.
you could leave the 1TB drive for system, remove all the media files taking up space, too and put those on the 3TB. I prefer to leave as is and have a safety net. At least for a month. Then turn the 1TB into a backup clone or something especially if you go ahead and get an SSD, which will run faster and perform better all around.
All depends on what you use your mac for.

Do I have to re-do BootCamp after hard drive upgrade?

I currently have an early-2011 MacBook Pro with 500GB storage. I ran BootCamp and now have a partitioned hd with 300GB on my OSX side and 200GB on my Windows side. I'm running out of space and want to upgrade my hd to a 1TB hd and was wondering if the ratio of storage space would be the same after the upgrade or if I would have to re-do BootCamp and re-install Windows. I have been backing up my computer on an external hd and would be able to go back to the way it was before I ran partitioned it, and since only games are on the Windows side (mostly through Steam), it wouldn't be too hard to start from scratch and re-install the games. So basically this is what I'm asking: after upgrading my hd from 500GB to 1TB, will I have to do BootCamp all over again or will I be able to choose how much space I put on each side of the partition?

There is a surprising amount of misinformation about this topic. I don't know whether the people who make Winclone are to blame, but if you look right across the internet you'd be forgiven for coming to the conclusion that the only way to move, restore or resize your bootcamp petition is to use paid software. This is simply not true. If you're willing to spend some time and follow a couple more steps, it's easy to install a new hard drive, and put both your OSX and WIN7 partitions back precisely as they were (or resize as you please) without using anything other than freely available utilities.
The way I've come up with uses a 160GB Maxtor USB drive and a DMG image of your bootcamp partition stored on a networked computer. I intended to write these up with screenshots at some point. But for now here are my unedited notes.
1 - use a utility called SuperDuper to create a bootable exact copy of your OSX partition - this is where the Maxtor external drive was used. One of the beauties of Apple OS - you can boot from a portable drive...
2 - Use the Disk Utility (Applications - Utilities) to create a DMG of your bootcamp partition - move this to a networked computer
3 - Create a bootable CD of the partition management program "GParted" by downloading and burning an ISO from their website.
Next step depends on what you want to achieve - this assumes you're installing a new drive.
4 - Install your new hard drive - plenty of videos around on how to do this, not hard.
5 - Plug in the drive that you used to create a backup of the MAC OS and hold down option when turning on - boot from the external drive
6 - Using the disk utility, create two partitions on your brnad new internal HD. Size doesn't really matter at this stage - just so long as one is big enough to fit the MAC OS
7 - Using SuperDuper copy your MAC OS back onto the first of the new partitions
8 - Before you restart, restore the DMG image you've stored on a networked computer (Images-scan for restore) to the second partition. It's important that you are still running off the external drive when you do this as otherwise you'll get a "resource busy" error when you try to restore.
9 - Shutdown. Turn on holding down option. Fire up the GParted disk you made early. It's an ugly interface, but gets the job done. Just accept the default settings when asked questions when starting up.
10 - Using Gparted delete any extra partitions that have may have crept in (I had a FAT32 200MB partition that was causing issues) - what you should have is only two partitions the HFS and the NTFS partitions. You can resize these to whatever you feel like. This may take some time. Moving partitions around on a 750GB new drive took about 4 hours. Shutdown and unplug everything.
11 - Turn on and hold option. Select the Mac OS hard drive and your OSX will start. At this stage you won't be able to boot into Windows - that comes in a moment.
12 - Download and install ReFit. Go into system preferences-startup disk and and make sure that the Mac OS is selected. Restart twice. Twice is important - that's when you should be greeted with the ReFit screen when you restart the second time.
13 - On the refit menu, select the option to the right of the command prompt icon (the partition tool) - it will ask you if it can sync the Mac boot table with the Win boot table (something like adding the MBR to the boot schedule) - say yes. It takes less than a second.
14 - Restart - and again hold option. Grab your original Windows installation CD and boot into it. Select your region and then go to "Repair your computer". Ignore the message about being able to fix and restart (choose No). Then choose Startup Repair. It'll do its thing. You can then restart.
15 - You should now have a working OSX and Bootcamp drive on your new hard drive - exactly as it was on the old one. Without dropping a cent on software and a great sense of achievement.

Upgrading my 320G to a 1TB

Similar Messages

Maybe you are looking for