Urgent : Domain creating for BPM in sql server 2008

Hi,
I have created the repository for SOA & BPM and installed the soa 11.1.1.7 in windows 64 bit.
while am creating the domain for soa in weblogic server 10.3.6. Am getting error like
[FMWGEN][SQLServer JDBC Driver][SQLServer]Could not find stored procedure 'master..xp_jdbc_open2'.
CFGFWK-60850: Test Failed!
For this issue i have found the solution from MOS
SOA 11g: Data Source Error Using SQL Server in Domain Configuration Wizard, 'CFGFWK-60850' [ID 1483823.1]
we have tried above solution but still we are facing the same issue.
please suggest me to solve this issue.
Regards
Kumar V

Hi,
Now the issue has been fixed.
we have followed the below mentioned document. it gives solution for this issue.
SOA 11g: Data Source Error Using SQL Server in Domain Configuration Wizard, 'CFGFWK-60850' [ID 1483823.1]
Thanks
Kumar V

Similar Messages

Set SPN for a local SQL Server 2008 R2 Express database used for local "Offline Mode" application

Hi - I have tried searching the web for tips on this situation. Basically, I am trying to recreate a previous employee's client Image. This image is used for one of our companies client application that features and "Offline Mode" where it connects
(Using Kerberos) to the local DB instead of the central DB server.
The custom image connects without issue. I cannot seem to recreate his configuration. I am sure of these things:
- Both images are using the same SQL Server 2008 R2 Express version.
- Both images have the same user accounts setup.
- Both images have "Remote Connections" setup with TCP/IP enabled in the Configuration Manager.
- Both images are joined to the same Domain server currently.
- Both images has the SQLServer service set to use "NETWORK SERVICE" account.
This is the error message I get when SQL starts up for the non-working image:
The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may
cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
Thank you for any assistance given.

Hi Gribbled,
Could you please change the SQL Server Service to run under 'LocalSystem' account and restart SQL Server? Then check if the error still occurs. When the SQL Server service account is configured to use the LocalSystem account, the server will automatically
publish the SPN.
Alternatively, to work around this issue, you can manually create the SPN for the SQL Server Service account using the SETSPN tool. For more details, please review this
blog.
Thanks,
Lydia Zhang

"Value cannot be null" error when trying to edit or create Maintenance Plan in SQL Server 2008

I have SQL Server 2008 installed on Windows Server 2008 64bit, every time I try to open or create a new Maintenance Plan I receive the error:
Value cannot be null.
Parameter name: component (System.Design)
Program Location:
   at System.ComponentModel.Design.DesignerHost.System.ComponentModel.Design.IDesignerHost.GetDesigner(IComponent component)
   at Microsoft.DataTransformationServices.VsIntegration.DtsDesignerService.OpenDesigner(String connectionString, Object connection, String objectUrn)
   at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.Invoke()
And in the Design view screen
"Microsoft SQL Server Management Studio is unable to load this document: Could not load type 'Microsoft.SqlServer.Dts.runtime.Wrapper.IDTSPackageSigning100' from assembly 'Microsoft.SqlServer.DTSRunTimeWrap, Version=10.0.0.0, Culture=neutral'.
I have searched for a possible solution and have tried some suggestions of registering the msxml6.dll but and have installed VS2008 SP1 but I'm not in a position where I can do a full reinstall of SQL Server right now. Any help is appreciated. My SQL server
environment information is below.
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Analysis Services Client Tools
2007.0100.1600.022 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.0.6002.18005 (lh_sp2rtm.090410-1830)
Microsoft MSXML 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 8.0.6001.18943
Microsoft .NET Framework 2.0.50727.4206
Operating System 6.0.6002

I digged a little deeper and figured out it was a missing directory/file in %TEMP%. Seems some CleaningTool removes all files/directories in %Temp% and after that SSMS was not working any longer. The missing file is actually not needed, but the
missing directory causes the "Value cannot be null" error.
My missing file name was:
C:\Users\<username>\AppData\Local\Temp\2\6vvdaozf.tmp
But the file name changes on every startup.
So my missing directory name was:
C:\Users\<username>\AppData\Local\Temp\2
After creating a empty directory with the name "2" in %TEMP% all went back to work fine for me.
I'm not sure the directory name is every time the same, but you can discover your missing file with the process monitor from Sysinternal Tools and filters to "Process Name is ssms.exe" and "Path contains AppData\Local\Temp"
Hope this helps other people to solve their issues too.
Thank you!! When I run %temp% it takes me to "C:\Users\Admin ...~\AppData\Local\Temp\some random number". At first the random number was 3, after I logged off and back on it was 2. My temp variable in enviromental variables is correct. I looked on another machine
running SQL2008 and temp is correct there. If I try to rename the numbered folder SSMS stops working. Any idea?

Problem in creating DATA Model from SQL SERVER 2008 in BI PUBLISHER

Dear Team,
I connect BI Publisher with SQL SERVER 2008 But On creating Report on BI,when we create data model...dataset,
i select the tables but when i click on RESULT i am geting this error.
error--
[Hyperion][SQLServer JDBC Driver][SQLServer]Invalid object name 'DBNAME.DBO.TABLE'.
please resolve this problem...
Thanks,
Him
Edited by: h on Aug 22, 2011 6:31 PM

Hi David,
The things I said are not a fix for this problem.
If your RCU installation worked, then you do not have to worry about modifying the createfr.sql.
Edit:
I've just tracked the problem. It appears that when using the query builder, BI forgets to add the " sign.
For example:
This query will give the hyperion error.
select     "table"."field"
from     "database.user"."table"
To correct it write it like this:
select     "table"."field"
from     "database"."user"."table"
Edited by: EBA on Nov 14, 2011 10:21 AM

Creating dynamic database connection (SQL server 2008) from Adf application

Hello,
I am creating an ADF Fusion Application. I use Jdev. 11.1.2.3.0 , WebLogic 10.3 and MS SQL server 2008 database. My question is that how can I create a database connection configuration file, now I connect to the database through hard coding, there should be a way to do this with sql server I think.
my database name is : testDatabase
my database username is : testUser
my database password is : testPassword
Anybody can help me please.
Thanks,
Shahe

Hello Frank,
The database schema is the same for all the users, but the location of the database differs, for example: I have set the hostname of the database to localhost because the database is installed on the local pc, but to other clients the database is installed on a managed server so in the hostname I should put the server's ip address or name. So I need an external file where I can set these options.
Thanks,
Shahe

Creating Universes from a SQL Server 2008 Database....Options?

Needing to create a Universe from a SQL Server 2008 DB, I am of course finding it difficult at best to get the ball rolling. Support tells me the only option I have is to use Designer, and to not use the "Automated Detection" features because they are not for production environment use <citing business requirement differences as one issue, as was noted during a support call when I was having problems with our VM server literally locking up while the "Automatic Detection" features were trying to run>.
So what that means is, from what I see, I am expected to manually add all of the SQL DB tables, and then have a Developer spend multiple hours adding appropriate Joins, Cardinalities, Keys, etc. And, whenever there are any DB changes, this has to be done all over again to the Universe to allow for syncronization with the DB.
This really seems like a heavy load to bear just to be able to use SAP. Is anyone else having these same challenges? Are there other options I am just not seeing? Seems to me Builder needs a SQL bridge honestly.
Appreciate any help I can get!!
-Carl

While it may seem disappointing, as long as you have the data schema and knowledge of the joins and cardinalities, then you've got a lot of the easy stuff sorted out.
What you need to provide is a presentation layer that is more than just turning the tables and columns into classes and objects. There are often things that you need to create that don't exist in the database, such as objects for relative dates. These can be found in the thread that I created over on the BOB Board here:
http://www.forumtopics.com/busobj/viewtopic.php?t=152613
Make sure that all objects have a description
Make sure that all dates and numbers have a format; there's nothing worse than creating a report and finding your year displayed as 2,011.00
Use predefined filters - include prompts
Other useful tips are available here:
http://www.forumtopics.com/busobj/viewtopic.php?t=15227
Do you have a set of reporting requirements?

Error creating GTC to Microsoft SQL Server 2008

I have a table in a Microsoft SQL Server 2008 data base.
When I set the configuration of the connector I get and error.
com.thortech.xl.gc.exception.DBException: The schema sipec does not exist in the target database.
In the database performed the following query " select * from sipec.dbo.TABLE" and throws me results. But if I performed the following query “select * from sipec.TABLE” this brings me no results.
So if in the field “Parent Table/View Name” I put this “sipec.dbo.TABLE” in the log file I see this error
com.thortech.xl.gc.exception.DBException: The table name must be specified in the form of [Schema].[Table] or [Table]
I put the driver where the guide indicate

What is the solution?
I have the same thing with SQL Server 2008 64 bit. When i switch my datasource from SQL 2008 to SQL 2000 it works great otherwise it will not work. I have checked SQL Server 2008 that all the ports show 1433. I have been stuck on this for a while. I also checked the SQL Server Network Configuration / TCP/IP and i have nothing in the dynamic field and all the ports show 1433. If someone has allready figured this out it would be good to have a solution- Especially since coldfusion is supposed to connect to the database....
Thanks for any help.

Creating Data Source to SQL Server 2008 in SharePoint Designer 2013

Hello,
I have been trying to create a Data Source connection to a SQL Server 2008 Database. I use a custom string and I choose the table to display and hit ok. When I try to click on the connection to edit it I get the following error.

Hi Derek,
According to your description, my understanding is that the error occurred when you edited the Data Source connected to SQL Server.
How did you create the Data Source connected to SQL server using custom string?
I recommend to connect to the database by saving the user name and password to see if the issue still occurs.
More information are provided in the link below:
http://office.microsoft.com/en-us/sharepoint-designer-help/add-a-database-as-a-data-source-HA010355745.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Renaming the Physical Filename for Datafiles in SQL Server 2008

Can anyone tell me how to change the physical filename of the datafiles? There doesn't seem to be any documentation on this, yet its quite easy to change the logical filename.

There are several ways to make this change, however to rename the physical database files at operating system level you will have to take the database offline
1. Use SSMS to take the database Offline (right-click on Database, select Tasks, Take Offline), change the name of the files at the OS level and then Bring it Online.
2. You could Detach the database, rename the files and then Attach the database pointing to the renamed files to do so.
3. You could Backup the database and then restore, changing the file location during the restore process.
4. using T SQL
ALTER DATABASE databaseName SET OFFLINE
GO
ALTER DATABASE databaseNAme MODIFY FILE (NAME =db, FILENAME = 'C:\Program
Files\Microsoft SQL Server\MSSQL.2\MSSQL\Data\db.mdf')
GO
--if changing log file name
ALTER DATABASE databaseNAme MODIFY FILE (NAME = db_log, FILENAME =
'C:\Program Files\Microsoft SQL Server\MSSQL.2\MSSQL\Data\db.ldf')
GO
ALTER DATABASE databaseName SET ONLINE
GO
for more info http://technet.microsoft.com/en-us/library/ms174269.aspx

Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ

Creating multiple views in SQL Server 2008 database through sqlcmd

I've written a script that generates a ddl file. The ddl file contains all the table creation, view creation and stored proc creation SQL statements for refreshing my database. The ddl file gets run by sqlcmd.
From reading other forum posts, it seems that views and stored procedures can only be created through the sqlcmd command when they are part of an individual batch. Can someone please direct me to the documentation on how to do this?
My DDL is below pertaining to view creation:
CREATE VIEW [global].[viewDstLocations]
WITH SCHEMABINDING
AS
   SELECT REPLACE(STR(c.dstYear, 2), ' ', '0') AS 'DSTyear',
          a.countryCode AS 'CountryCode',
          a.countryDivision AS 'CountryDivision',
          a.stateCode AS 'StateCode',
          a.locationCode AS 'LocationCode',
          a.locationType AS 'LocationType',
          a.gmtVariation AS 'GMTvariation',
          c.dstVariation AS 'DSTvariation',
          REPLACE(SUBSTRING(CONVERT(VARCHAR(8), c.dstStartTs, 8), 1, 5), ':', '') AS 'DSTstart_time',
          CONVERT(VARCHAR(8), c.dstStartTs, 12) AS 'DSTstart_date',
          c.statusMarkerStart AS 'StatusMarker_start',
          REPLACE(SUBSTRING(CONVERT(VARCHAR(8), c.dstEndTs, 8), 1, 5), ':', '') AS 'DSTend_time',
          CONVERT(VARCHAR(8), c.dstEndTs, 12) AS 'DSTend_date',
          c.statusMarkerEnd AS 'StatusMarker_end',
          c.dataIndicator AS 'DataIndicator',
          b.locationName AS 'LocationName',
          a.latitude AS 'Latitude',
          a.longtitude AS 'Longtitude'
      FROM [global].[dstLocations] a
         LEFT JOIN [global].[dstLocationNames] b ON (b.locationId = a.locationId AND b.locale = 'en_US')
            LEFT JOIN [global].[dstLocationInfo] c ON (c.locationId = a.locationId);
GO;
EXEC sys.sp_addextendedproperty @name=N'MS_Description', @value=N'DST location info shown in the legacy table structure as well as data format.',
@level0type=N'SCHEMA', @level0name=N'global', @level1type=N'VIEW', @level1name=N'viewDstLocations';
GO;
CREATE VIEW [global].[viewTypes]
WITH SCHEMABINDING
AS
   SELECT a.levelTypeId, a.levelTypeName, a.levelDepth, b.productId, b.productName, c.baseLevelTypeId, c.baseLevelTypeName
      FROM [global].[levelTypes] a
         LEFT JOIN [global].[products] b ON (b.levelTypeId = a.levelTypeId)
            LEFT JOIN [global].[baseLevelTypes] c ON (c.levelTypeId = a.levelTypeId);
GO;
EXEC sys.sp_addextendedproperty @name=N'MS_Description', @value=N'Displays level types and their associated products and base level types.' , @level0type=N'SCHEMA',@level0name=N'global', @level1type=N'VIEW',@level1name=N'viewTypes';
GO;
<<Several other views>>

Kalman,
I've followed that approach, but was getting an error. Hopefully this gives enough detail:
First, I use a .bat file to generate the sql file as you suggest. The structure is as follows:
USE [MYDB]
GO
<<All my create scripts, without GO between them>>
GO;
<<All my view scripts, without GO between them>>
GO;
<<All my strored procedures, without GO between them>>
GO;
Then, I run the generated SQL with the -i option as you mentioned.
I get back the resulting error below:
Msg 156, Level 15, State 1, Server DEV-238SQLEXPRESS, Procedure viewDstLocations, Line 2
Incorrect syntax near the keyword 'EXEC'.
Msg 156, Level 15, State 1, Server DEV-238SQLEXPRESS, Procedure spGeneralDeleteNodeAndSubtree, Line 2
Incorrect syntax near the keyword 'PROCEDURE'.
Msg 137, Level 15, State 2, Server DEV-238SQLEXPRESS, Procedure spGeneralDeleteNodeAndSubtree, Line 2
Must declare the scalar variable "@parentId".
Msg 137, Level 15, State 2, Server DEV-238SQLEXPRESS, Procedure spGeneralDeleteNodeAndSubtree, Line 2
Must declare the scalar variable "@levelTypeId".
Msg 137, Level 15, State 1, Server DEV-238SQLEXPRESS, Procedure spGeneralDeleteNodeAndSubtree, Line 2
Must declare the scalar variable "@name".
Msg 137, Level 15, State 2, Server DEV-238SQLEXPRESS, Procedure spGeneralDeleteNodeAndSubtree, Line 2
Must declare the scalar variable "@name".
Msg 134, Level 15, State 1, Server DEV-238SQLEXPRESS, Procedure spGeneralDeleteNodeAndSubtree, Line 2
The variable name errormsg has already been declared. Variable names must be unique within a query batch or stored procedure.
From the documentation, I saw that CREATE VIEW needs to be the first statement in a batch. I assume this to mean I will need to break out my view and stored procedures to separate files and call the sqlcmd command multiple times, once for the table creation
and then once for each view and once for each stored procedure. If there is a way to still do this as only one file, that would answer my original question.
If there is anything else I can paste or send, please let me know.

How to create interactive reports in SQL Server 2008 R2?

Dear,
I want to create a interactive dashboard in that there is 4 parts and on the selection of one values in one part, detailed value of other part of the report has been changed?
I've tried through Bookmark but this loads complete data in other part of the report. but i just want to load the information of selected record.
Please help to provide the solution for the same.
Thanks in advance.

Hi Anurag,
I have an idea , for your scenario you can use subreport and pass parameter to that subrreport from first part to change the value based on the selection of value from first part.
Suppose in first part you are showing aggregate values department wise and in second part you want to show details of that department which selected by user from the first part so you can create a separate part to show details of department with parameter
department which will filter your report according to department and use this report in second part as sub report and for department parameter map it to the first part so if user will select on values of any department then that department name will be passed
in the parameter of sub report and your sub report will show details of that department.
so in first part go to textbox property and go to action tab and then pass parameter.
some examples to set parameter from main report into sub report:
https://www.katieandemil.com/ssrs-create-subreport-with-parameter-example-tutorial-ssrs-2008-r2?tab=article
http://blog.aditi.com/enterprise_social/how-to-pass-multi-value-parameters-to-sub-reports-in-ssrs/
Thanks!!
Live life with joy and happiness! Avanish

Creating the report in BI Publisher with SQL SERVER 2008

Dear Team,
I want to create report on BI Publisher....i am able to create report with the help of oracle database ...but i dont'nt know how to create DATA MODEL in sql server 2008 ...
plz tell me the wright way....
Thanks,
Him..

Hi Jin Chen,
Thank you for your response. I have disabled all the Symantec End Point Protection Service, but problem persists..
Further, I have checked through the ULS Log in SharePoint, there is more error reported there:
11/03/2010 15:19:48.44 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services Database
6f8g Unexpected
Unexpected query execution failure, error code 282. Additional error information from SQL Server is included below. "The 'proc_GetTpWebMetaDataAndListMetaData' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be
returned instead." Query text (if available): "{?=call proc_GetTpWebMetaDataAndListMetaData(?,'F77D6A37-F8D2-492C-911C-923C8A135DEB',?,NULL,1,?,?,6187)}"
11/03/2010 15:19:51.46 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
11/03/2010 15:19:51.69 ReportingServicesService.exe (0x3510)
0x1EEC
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
Do you have any idea based on the error above?

Create oracle table from sql server

Dear Gurus,
I need to create some tables from sql server 2008 to a oracle 11g database. Some tables contain vbinary datatype. Now my queries are
1. How can I do that?
2. If DB link is a solution then would you please provide me a step by step process to do so?
3. Is there any issue with datatype?
SQL Server db is on windows 2008 R2
Oracle is in RHEL 5.5
Will appreciate ur help.

well suppose i generate flat files from sql server and load in oracle by sqlloader then will there be any issue with vbinary datatype? what should be the equivalent data type in oracle table?

Has mssql2008r2 got "Cumulative Update Package 6 for SQL Server 2008 Service Pack 1"

hi,
I have
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86) Apr 2 2010 15:53:02 Copyright (c) Microsoft Corporation Express Edition with Advanced Services on Windows NT 5.1 <X86> (Build 2600: Service Pack 3)
, i wanted to know has it got
"Cumulative Update Package 6 for SQL Server 2008 Service Pack 1"
so that i do not have to install or i have to install
yours sincerley

Thank u, please tel me can i instal sp3.
I have noticed the link of sp2 (http://www.microsoft.com/en-in/download/details.aspx?id=30437)
has listed
(SQL Server 2008 R2 Express Edition)
SQL Server 2008 R2 Service Pack 2 (SP2) is now available for download. SQL Server 2008 R2 service packs are cumulative and can be used to upgrade all releases of SQL Server 2008 R2 to Service Pack 2. SQL Server 2008 R2 Service Pack 2 contains Cumulative Update
1 to 5 from SQL Server 2008 R2 SP1. The package can be used to upgrade the following SQL Server 2008 R2 editions:
SQL Server 2008 R2 Parallel Computing Edition
SQL Server 2008 R2 Datacenter Edition
SQL Server 2008 R2 Enterprise Edition and Developer Edition
SQL Server 2008 R2 Standard Edition
SQL Server 2008 R2 Web Edition
SQL Server 2008 R2 Workgroup Edition
SQL Server 2008 R2 Express Edition
where as link of sp3(http://www.microsoft.com/en-us/download/details.aspx?id=44271)
has not listed express edition but written in general.
SQL Server 2008 R2 Service Pack 3 (SP3) is now available for download. SQL Server 2008 R2 service packs are cumulative and can be used to upgrade all releases of SQL Server 2008 R2 to Service Pack 3. SQL Server 2008 R2 Service Pack 3 contains
Cumulative Update 1 to 13 from SQL Server 2008 R2 SP2. The package can be used to upgrade the following SQL Server 2008 R2 editions:
SQL Server 2008 R2 Parallel Computing Edition
SQL Server 2008 R2 Datacenter Edition
SQL Server 2008 R2 Enterprise Edition and Developer Edition
SQL Server 2008 R2 Standard Edition
SQL Server 2008 R2 Web Edition
SQL Server 2008 R2 Workgroup Edition
yours sincerley

Urgent : Domain creating for BPM in sql server 2008

Similar Messages

Maybe you are looking for