Urgent Help Required- Syncing Issues
Heya.
I have just purchased an 80GB Ipod Classic and have been experimenting with syncing music from my previous libary, to my new iPod. This hadnt worked. Eventually i downloaded the new Itunes 7 and put all my previous music on there, but my Ipod will not sync my music. Nothing comes up. I watched a tutorial about syncing, and realised the Set Up Assistant did not appear, allowing me to name my Ipod or anything like that. So when i go to help, they tell me to click summary and i cant do that as my Ipod, although recognised on devices, will not sync my music.
N e help/support will b MUCH appreciated. I am at the end of my tether.
Emily
I've had trouble getting iTunes to recognise my iPod classic too. The only solution I've found is to reset the iPod just before connecting it to the computer. To do this, slide the hold button on and off then hold down the centre buton and the menu button at the same time for 6-10 secs.
I don't know if this will solve the issue in your case, but it's worth a try.
Similar Messages
-
Attachment issue --very urgent help required
Hello friends,
1)i have create page and deatal page . requirement is that we have to load required attachments in table region, if not loading required attachments exception will raise. this validation is working fine in create page.
2)same in detail page i loaded required attachments also excepiton is raising.
waht would be cause. i am very new to ADF technology.
very urgent to fix this issue. any one help me out.
Thanks,
vamshi.
Edited by: Krishna Vamshi on Jul 1, 2010 6:14 PMKirshna,
Unfortunately your question is very unclear.
Let me say that if you are asking about OA Framework, you should ask on the OA Framework forum, not here.
also excepiton is raising.It will help if you say what the exception is.
John -
Urgent help required: Query regarding LC Variables
Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AMLC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type. -
Urgent HELP required on forming the Matrix of data using PL/SQL
Hi All,
I'm new to this thread and require your urgent help in this regard.
I've got a requirement for building a 5000 X 5000 matrix using PL/SQL. My original data tables have 5000 rows each and I need to do a correlation analysis using this data and need to store in a physical table and not in-memory. Is this feat achievable using mere PL/SQL? I understand that Oracle DB has a limitation of 1000 columns(but not sure) and hence I'd like to know whether there is any work-around for such scenarios. If not, what are the other alternative method(s) to achieve this feat? Do I need to use any 3rd party tools to get this done? An early reply from the experts is highly appreciated.
Thanking you all Gurus in advance.
Rgds
SaiWelcome to OTN!
I'll get to your quesiton in a moment, but first some welcome information. Many OTN posters consider it impolite to mark threads as "urgent". We are volunteers and have jobs of our own to do without people we don't know making demands. You are brand new and deserve some patience but please understand this. It is very likely before I finish this post someone will complain about the word "urgent" in your subject.
On to more interesting things :)
You can do the matrix, but are out of luck with a 5000 x 5000 table because Oracle only allows 1000 columns per table. There are ways to work around this.
How do do the matrix depends on what you want to do. You can do this different ways. You can create a table beforehand and use PL/SQL or simple SQL to populate it, or use the CREATE TABLE AS syntax to create and populate it in one step if you can get the underlying SQL to work the way you want, something like
create table my_table as
select a.*, b.*
from table1 a, table2 bcan populate a matrix from 2 tables with an intentional cartesian join (the WHERE clause was left out intentionally, provided your data is already in the data base.
If not you can use a PL/SQL routine to populate the data.
There are a couple of ways to solve the 1000 column limit. The easiest way might be to have 5 collections of 1000 columns each. A more complicated but more elegant soltion would be to have nested collections, allowing 2 colliections that you can loop through - a collection of collections. Nested collections can be hard to work with. A third way would be to use nested tables in the database but I personally do not like them and the insert, update, and delete statements for nested tables are hard to use.
I'm not going to give a code example because I am not sure which solution is best for you. If you have further questions post them. -
Urgent Help required! - Storing the XML as String instead as a file
Hi,
I need urgent help on this.
I have an XML file. I have used org.w3c.dom to build dom and manipulate the XML file.
I have updated the values for some of the nodes and I have deleted some of the unwanted nodes.
I am able to save the output of the DOM as another XML file using
either transform class or XMLSerializer with OutputFormatter class.
But my requirement is to save the output of the DOM into a String instead of a file.
When I save it in String, I need to have the following XML decalration and DOCTYPE declration also with it.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE Test SYSTEM "Test.dtd">
Can anyone pls help me in this??
Thanks in Advance. Expecting some inpputs pls....!
Regards,
Gayathri.hi,
i think this is what u want
public static String getXmlString(Document d) {
StringWriter strResponse = null;
try {
OutputFormat format = new OutputFormat(d);
strResponse = new StringWriter();
XMLSerializer serial = new XMLSerializer( strResponse, format );
serial.asDOMSerializer();
serial.serialize(d.getDocumentElement());
catch (Exception e) {
System.out.println(e.toString());
return strResponse.toString();
}HTH
vasanth-ct -
Urgent Help Required for Connect Four Game
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end class
I am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda
//Hi,
Thanks for your help but I really don't understand the table lookup algorithm. Could you please send me some code to implement that.
I will send you the formatted code as well
Thanks for your help.
looking forward to your reply.
Koonda
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end classI am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda -
DVD Studio Pro 4.x. Using Quicktimes of :30 each with the DV-NTSC codec.
Created a menu that has 10 categories of commercials. In the "financial" item, when clicked on, it goes the first commercial...the end action is to go to the next commercial and so on. The final commercial in the series returns to the main menu.
All the different categories worked fine except for one in the financial, and I couldn't figure it out, so I took it out. THE KEY-->once I took that spot out, the sync issue cascaded to another piece of video (chapter/track). No matter how many variations of disconnecting files, deleting files all together and re-importing, deleting rendered MPEG and AIFF files worked. Finally I gave up and edited the 9 spots together in Final Cut and created one long spot. Of course, that worked fine. No sync issues... Until my boss asked me to remove one spot from one of the other categories...then the whole sync thing happened again in that other category! ***!?!?!?
Would I be better off squishimatizing the files in Compressor first and bringing them in seperately into DVDSP? I am probably doing something very obvious that I shouldn't be... pppppppplease help me to determine what my idiocy is.What format are you using in iTunes to play them back? Are these the exact same files as the one, you are playing back in Quicktime 7?
-
I am having problems implementing a username validaion bean for my login system. Every time I click my login icon on my main JSP page the login JSP page does not appear except one of the error JSP pages.
How can I correct this problem?
Does the code below look correct?
Below is the codes for the Username Validation Bean :
LOGIN.JSP
<%@ page import="java.io.*"%>
<%@ page import="java.util.*"%>
<%@ page import="java.sql.*"%>
<%@ page import="com.mysql.jdbc.*"%>
<%@ page errorPage="badLogin.jsp"%>
<%@ page import="gcd.UserNameValidationBean"%>
<%
Class.forName("com.mysql.jdbc.Driver");
java.sql.Connection connection=java.sql.DriverManager.getConnection("jdbc:mysql://localhost/gcdBB_db");
java.sql.Statement statement = connection.createStatement();
Enumeration parameters = request.getParameterNames();
if(parameters.hasMoreElements())
String usernameValue = request.getParameter("username");
String passwordValue = request.getParameter("password");
statement.executeUpdate("INSERT INTO users (username,password) VALUES ('"+usernameValue+"','"+passwordValue+"')");
%>
GOODLOGIN.JSP
<%@ page errorPage="badLogin.jsp"%>
<%@ page import="gcd.UserNameValidationBean"%>
<% UserNameValidationBean validationBean = new UserNameValidationBean();
if(request.getParameter("username")!=null)
validationBean.validateUserNameBean(request.getParameter("username"));
%>
<%=request.getParameter("username")%>
USERNAMEVALIDATIONBEAN.JAVA
package gcd;
public class UserNameValidationBean
public UserNameValidationBean(){}
public boolean validateUserName(String userName) throws InvalidUserNameException
if(userName.length() < 32)
throw new InvalidUserNameException("User Name Invalid: " + userName);
return true;
INVALIDUSERNAMEEXCEPTION.JAVA
package gcd;
public class InvalidUserNameException extends Exception
public InvalidUserNameException(String message)
super(message);
I need urgent help to get this working!Here is code for badLogin.jsp and badLoginWithExceptonObject:
BADLOGIN.JSP
<HTML><HEAD><TITLE>Login Failure</TITLE></HEAD>
<BODY bgcolor="#FF9900">
<H1></H1>
<font face="Arial" size="3">Sorry but you either entered an incorrect username
or password </font>
<P><font face="Arial" size="3">Try Again</font>
</BODY></HTML>
BADLOGINWITHEXCEPTIONOBJECT.JSP
<HTML><HEAD><TITLE>Check User Login Against Parameters</TITLE></HEAD>
<BODY bgcolor="#FF9900">
<%@ page isErrorPage = "true"%>
<P><font face="Arial" size="3">Error =</font> <%= exception.getMessage()%> <% PrintWriter writer = new PrintWriter(out); %>
<P><font face="Arial" size="3">Stack =</font> <% exception.printStackTrace(writer); %>
<P><font face="Arial" size="3">Try Again</font>
</BODY></HTML> -
Urgent help required in migration
Hello,
I am stuck on 77% of r3load process my all 15/16 processes are finished successfully only one process has failed I have cut paste the log (SAPAPPL1.log) below of the same. Request your urgent help.
DbSl Trace: Connecting via TNS_ADMIN=/oracle/F01/920_64/network/admin, tnsname=F01
DbSl Trace: Got NLS_LANG=AMERICAN_AMERICA.US7ASCII from environment
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database instance F01 is running on e027pae0 with ORACLE version 9.2.0.7.0
trying to restart import ###
(RIM) INFO: table "BKPF" truncated
restart finished ###
#START: 20070530101004
TAB: BKPF
(RD) ERROR: missing last block number for table "BKPF" in directory file "/sapcd/EXPDIR/DATA/SAPAPPL1.TOC"
#STOP: 20070530101004
Thanks & Regards,
BhushanDid you split the files?
It seems that export file for this table got corrupt.
Unfortunately, you ahve to start again. I had a similar problem and had to do it again. -
Urgent Help Required - Video Not playing on IE11 and Firefox
Hi,
I need Urgent Help , I am trying to Play this Presentation on IE 11 and Firefox and it doesn't play the Video part which is FLV and f4v formats.
I have been googeling it but couldn't find a solution so far ,Can anyone please help , its really urgent as I am done with the Project ,and this is the last bit which I have been struggling with for a while now.
Here is the HTML Code I am using :
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>index</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css" media="screen">
html, body { height:100%; background-color: #ffffff;}
body { margin:0; padding:0; overflow:hidden; }
#flashContent { width:100%; height:100%; }
</style>
</head>
<body>
<div id="flashContent">
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="800" height="600" id="index" align="middle">
<param name="movie" value="index.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />
<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="index.swf" width="800" height="600">
<param name="movie" value="index.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />
<!--<![endif]-->
<a href="http://www.adobe.com/go/getflash">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
</a>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
</div>
</body>
</html>
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->Any Help in this Regards will be highly appreciated
-
Sending Details -- URGENT HELP REQUIRED! ! !
Hi,
I have a programming problem which I need urgent help with....
1.) I firstly have a HTML file which a user will fill out 3 fields on and submit.
2.) A servlet will get these parameters, validate some information and update a database.
Problem Part Needs to send on these details to another servlet which will be located on a seperate server.
Is there a way of doing a submit like function without an actual submit, as this will all be done away from the user.
Was initially going to use:
ctx = getServletContext();
rd = ctx.getRequestDispatcher("https://localhost:8443/servlet/FileName");But found out you can only do this with files in the same immediate location!
3.) Next servlet will accept in the same details as 2, and do some more functions and database updating. Before again sendin on some details to another servlet! (so same problem as in 2).
4.) Accepts in details from 3 and updaes database!
So does anbody have any ideas how this can be done??
Any help greatly appreciated.
DBM.Whats so wrong with posting in more than one forum? I
need to get this done in the next few hours and im not
exaclt the most qualified java developer in the
world!!
sorry if its such a crime! :o(Should be obvious. You post exact question in forum A and B. Person A answers you on forum A. Person B, not knowing you were already answered because he's looking at the post on forum B, answers you on forum B, thus having wasted his time. -
PCR to read the variable-Urgent help required
Dear Experts,
I'm trying to read a variable in a pcr and tried many ways however NOT been successful
so far hence seeking your help
I have a WT( 5115) in infotype 15 and I would like the amount to transferred to a varibale and read it in the
further PCRs.
PCR1 --> Creating the variable
5115
ADDWT&9TMP
ADDWT *
PCR2--> Reading the value of the variable
5115
AMT=& 9TMP( One space between & and 9TMP)
AMT?0 -> If the variable exists?)
=
AMT= 5008( another wage type)
ADDWT 5308( new wage type only for passing the value from 5008 to 5308)
GCY PCR3( another rule to be processed if WT 5115 exists)
However PCR2 is not getting processed at all for WT 5115.
Please suggest to help resolving this issue.
Thanks,
PoonamDear Remi,
In case of retro termination following is happening-->
For retro month( of termination) eg. 08/2014( emp retro terminated effective 27/08/2014 however termination is done in the month of 09/2014)--> PCR is running for decision PPPAR A=A and calculation is done
For the payroll period ie. 09/2014--> PCR is running for decision operation PPPAR R=R
Hence the PCR is running twice. I would only like the PCR to be run for the payroll period only.
Can you suggest what changes should I make in the PCR given below-->
ZEOF Personnel Calculation Rule VAR 9TMP
5008 ESB Calculation Salary
PPPAR A Termination in mnth?
PPPAR R WCenter inactive/PP?
PPPAR F Term.at end of per.?
F
R
AMT=& 5113 Set
AMT?0 Comparison
AMT- 5008 Subtraction
AMT?0 Comparison
<
FILLF NRA Fill amt/no/rate
ADDWTE5308 RT Results table
ADDWT * OT Output table
=
FILLF NRA Fill amt/no/rate
ADDWT * OT Output table
>
FILLF NRA Fill amt/no/rate
ADDWTE5208 RT Results table
ADDWT * OT Output table
=
FILLF NRA Fill amt/no/rate
ADDWTE5308 RT Results table
A
AMT=& 5113 Set
AMT?0 Comparison
AMT- 5008 Subtraction
AMT?0 Comparison
<
ADDWTE5308 RT Results table
FILLF NRA Fill amt/no/rate
ADDWT * OT Output table
=
FILLF NRA Fill amt/no/rate
ADDWT * OT Output table
>
ADDWTE5208 RT Results table
FILLF NRA Fill amt/no/rate
ADDWT * OT Output table
=
AMT= 5008 Set
ADDWTE5308 RT Results table
FILLF NRA Fill amt/no/rate
ADDWT * OT Output table
Please note that WT 5008 is an accural total wage type and exists in every month. However I see that there is NO retro happening for this wage type in the system in case of retro termination. Can that be an issue? Logically retro should run for this WT for Retro termination and it should not exists for the payroll period after termination??
Thanks,
Poonam -
SAML configuration issue-Urgent Help required!!!
I have configured SAML using the following article guidelines http://www.oracle.com/technology/pub/articles/dev2arch/2006/12/sso-with-saml.html
but I 'm unable to login to Application A itself which is SAML source site.Please Help me to understand where am i going wrong!!!!!Hi George,
The issue is I wanted to download few app from google play on Cisco DX 650 example office suite whic helps to open an attachment like word pdf etc on the phone.In order to do that we require a google play store app on the phone which I am able to see on few phones and on few phones it is missing.
I have checked the CUCM config for all the phone and I can see allow application from android market is enabled.
still I am not able to see the play store Icon
Rgds,
Ajith -
If someone could please help me
If you mean that the apps do not sync from iTunes to the iPod?
have you successfully synced apps from that computer before?
Are the apps compatible with your model iPod and its iOS?
Do you have Restrictions set that prevent installing apps(Settings>General>Restrictions)
You are not giving us enough information to really help you -
Require Very Urgent Help on Aggregation Issue. Thanks in advance.
Hi All,
I am new to essbase.
I have got an issue with aggregation in Essbase. I load data at zero level and then when I aggregate using CALC DIM i do not get any value.
The zero level load being:
Budget,Version,Levmbr(Entity,0),Levmbr(Accounts,0),NoRegion,NoLoc,NoMod,Year,Month.
When I use default calc or give Calc Dim for the above no aggregation takes place at the parent level.
Requirement :
Values at Version,Region,Location,Model,Year,Month.Budget Level.
Please advice.
Thanks in advance.
Bal
Edited by: user11091956 on Mar 19, 2010 1:07 AM
Edited by: user11091956 on Mar 19, 2010 1:10 AMHi Bal,
If you had loaded without an error , and after that your default calc is resulting in not aggregated values. Then I can imagine only one way, it cannot happend is through your outline consolidations.
Check,if data which is loaded at the members does have IGNORE or ~ as the consolidation
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/
Maybe you are looking for
-
ADF ProcessScope -- I get a new AdfFacesContext on each page load
I am trying to store some variables in the ADF processScope. But the next time the page is loaded and calls the managed bean methods, the AdfFacesContext is different, and so the processScope is empty. The managed bean is session scope, and I am sett
-
I was given an iMac desktop computer, operating system OSX 10.4.8 (2011). The network admin utility is not compatiable with my airport extreme router, and I am unable to connect to the internet to update the software. Can someone please tell me how
-
How to make the payroll field in the assignment screen mandatory using personalization ?
I am trying to make the payroll field required in the assignment screen using personalization , but it's not working, can anybody assist me ? Thanks.
-
Need BAPI for upload the special ledger data (GB01)
Hi Guys, I have to upload the GB01 data from excel to sap. Is there any BAPI for this app plez Help me thanks
-
New 30Gb Just shows white screen
I purchased a 30GB on Ebay (yes, I know, bad move) and when I got it and plugged it in, it only shows a white screen, and won't do anything else. Tried to reset, no go. Is there anything else I can do before I return this to the guy I bought it from?