Urgent Help Requried with Logic

Hi All,
Here is the data
Country Count
India 1
China 10
USA 8
Now I want to get the country name with maximum count.
Can anyone quickly help me on this plz.
:)

> Is this forum only for COMPLEX questions?
Not at all.
I'm hard on postings that claim they have urgent complex Oracle problems. (it is not acceptable for anyone here to claim they have an urgent problem - truly urgent problems require official Oracle support)
You barged into a forum. Attempted to jump the queue (so to speak) by trying to grab attention by shouting "urgent problem!! help!!". And then it was not even an Oracle problem!?
That was a very selfish thing of you to do.

Similar Messages

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

Urgent help needed with installation of Logic!

Hi I just installed Logic Pro 9 on the Macbook Pro I bought today and it failed because 'this version of OSX is not compatible with Logic 9.1.1.' What should I do? Two years ago I installed the same version on my previous Macbook. Both Apple and the reseller said it was going to be fine. Please help me as quickly as possible. I need to use it in a couple of hours...thanks. Xavier

Restart your Mac and Run Software update

Some urgent help needed with MobileMe suddenly saying my password is wrong

Hi
First of all I want to say sorry if this is in the wrong forum, but I needed some urgent help and I couldn't find a forum other than this that might relate to this issue.
The issue that I am having is with my MobileMe Account. I was on my Mac, when when my MobileMe Account suddenly dropped its connection and told me that I had entered the wrong username or password (I know I hadn't) I tried to re-enter them but every time I try I just get a message that says I have entered the wrong username or password. I no longer have access to my Mail, I can not sing-in to MobileMe to access my online account and it wont let me change the password because it keeps saying that safari can not open the page.
I can not sign-in to my MobileMe folders on my Mac and it wont sync. I was signed in perfectly fine before this happened so I know its nothing to-do with my password or user name.
I am now locked out of MobileMe and need some help as to what might have went wrong
Can someone please give me some quick help as this is really worrying me as I am afraid my MobileMe account might of been hacked (that is the kind of behaviour that I am seeing - saying that my username and password are wrong, when they are not, and not letting me sign in to change them)
Huge thanks

Ughhh,
it seems my panic was for nothing. I just ran apple 24 hour support and they put it right for me it cost me but I'd rather be safe and pay then loose all the information I have on MobileMe. This has taught me a lesson anyway, I need to keep a backup of everything and not just rely on time machine

Forms6i(urgent)(help me with code)

Hi all,
I am having table like this
CREATE TABLE SYS_PROFILE (
APP_CD VARCHAR2 (5),
LOCK_DT DATE,
AUDIT_DT DATE,
ST_DT DATE,
END_DT DATE)
There is global variable: global.sys_id.
This is supplied from the main menu.
On loading the form for the :global.sys_id = 'ST', it should load the third record (maximum start date for that app_id) automatically.
In case the user changes the start_dt then it should pick up that record and display.
to acheive this please help me with the code
Regards
Ni

Hello,
Firstly, please, avoid the "urgent" word in this forum. Nobody 's paid to answer questions, and there is no question that is more "urgent" than other.
You can filter a based block by 2 ways:
- set the Default_where block property
Set_Block_Property( 'the_block', DEFAULT_WHERE, 'the_new_where_clause');
- set the field content in a PRE-QUERY block-level trigger
:block.item := :GLOBAL.SYS_ID ;
Francois

URGENT - HELP NEEDED WITH ECC 6.0 ACCESS KEY and USER SETUP

Please help me with the two issues:
1) In ECC 6.0, When I go to SE12 , table V-FAGL_ACTIVEC (New GL Activation) to make the table display and maintenance allowed, I am asked for the access key. What is the access key that I am supposed to put here. When I go to DEVACCESS table and put my username, I still dont get the access key.
2) Also I need to know what should be maintained under SU01 to give a user all authorizations. I have SAP_ALL and SAP_NEW. Is there anyother profile need to be given here. Also do I need to give anything under roles tab in order for the user to have all accesses??

OK I have TAR for this:
TAR 4234076.996
and related issue discussed in regards to 500 Internal Server Error described on Neverending frustration with JDeveloper
with the TAR number
TAR 4332393.995
The latter has been demonstrated and confirmed to be a BUG at this point. For the future updates on this issue please refer to
Neverending frustration with JDeveloper

Urgent help needed with Lucida Grande

I have to use this font for a project, I can't get away with Lucida sans, it HAS to be Lucida Grande.
I don't quite know what is going on but I have some text in Lucida Grande Regular which is all fine, I tried creating another text box but it's showing up as Lucida Grande Bold? I tried to change it to Regular but there's no option for it? When there is regular font right next to it?
If this is something really simple I'm sorry! This is my first time using indesign, if it was my choice I would of used something I was more familiar with. The deadline is on Friday so it's urgent I get help so it doesn't get presented half bold half not.
Using CS5, on Windows Vista

Yes that's fine. Unfortunately is doens't show something obviously out of the ordinary.
I gues the next ting is to see if the font is available in a new document. If it is, try this on the one giving you trouble: Remove minor corruption by exporting
If not, you should look at: Replace Your Preferences

Some help required with logic for a dynamic sql query

i have below code but not sure how to resolve this problem - what i need is to be able to dynamically
the problem:
i have a rabbge of paratmeters coming in from a form and need to be able to create a dynamic query string to go into a prepared statement object.
the problem i have is there are 2 fields year range and year.
if year range is none i need to create the query string as such :
where the value of year can be serached on exactly
str.append("VOLUME_YEAR = ? ");the probelm is if the year range is 5 or year range is 10 i dont know how to maipulate the query string to be able to set the string such that i can then place the year value in the place holder in preparedStatement.setInt(1, year)
how can i create the intial query string ie.- what are the possible things that i can do. - i'm thinking of things like putting some type of between or such type query statement - but not at all sure how the syntax would go - ie. how would i use the year value and how would i create this dynamic part of the query string so that the JDBC regonises it?
thanks for any help.
public String setVolumeYearQuerySt(String year, String yearRange, StringBuffer str){
          String volumeYearQueryString = null;
          Sring doAction= null;
          if (yearRange.equals("None")){str.append("VOLUME_YEAR = ? ");}
          else if(yearRange.equals("5 Years")){doAction = "Nothing";}
          else if (yearRange.equals("10 Years")){doAction = "Nothing";}
          return volumeYearQueryString;
          }

Saish - thanks a lot for the code example.
Although, i think its far too advanced for me to understand and try to manipulate it and fit my problem. I'm pretty new to programming as you can probably see from my simple if else type statements. But i'm going to give it a try and see how it goes.
could you please be kind enough to demonstrate how i could use the above syntax to do the following. --
i have a year being entered in form . in the database there is a column year volume which contains year in single year value format and also in a year range value format - thus as in below - how could i do this -
eg.
user can enter a value in the year field a single value or a range value - then he can select +/-5 or 10 yrs range on that value - the DB holds the values as single values and ranges as below -
one suggested apporach is as follows if a single user is alloweed to enter only a single value in the filed and select a query range +/- 5 etc..
volume year of �1926-1928� and the user enters �1927�, the query has to find all records where
look for records that are �less than or equal to� 1927. It then has to check to see if it contains a range. For those that it finds containing a range, it has to work out what the �upper� year is and check to see if that is �greater than or equal� to 1927. If it is, then that is a possible matchanother approach that is suggested is to have a drop down with all years from databse and user is only llowed to select value from drop down and following logic is suggested :
Because volumes can be received as ranges (e.g. 1964-1966), some extra coding is required where the user asks for a Year Range (such as + or � 5).
Using the Year selected from the dropdown list, split it into 2 values, a low year and a high year. For example, if �1965-1968� is selected from the year dropdown, split it into �1965� and �1968� for the low year and high year respectively. If �1964� is selected from the year dropdown, split it into �1964� and �1964�. Now take the Year Range that the user has entered into account. For example, if the user has entered 5, subtract 5 from the low year and add 5 to the high year. Using these values, include the following search criteria in the query to the database:-
(<low year>     BETWEEN
             left (VOLUME_YEAR, charindex ('-',VOLUME_YEAR + '-') - 1)
     AND     right (VOLUME_YEAR, charindex ('-',VOLUME_YEAR + '-') - 1))
OR     (<high year>     BETWEEN
             left (VOLUME_YEAR, charindex ('-',VOLUME_YEAR + '-') - 1)
     AND     right (VOLUME_YEAR, charindex ('-',VOLUME_YEAR + '-') - 1))regards - i think if i could solve the first approach that would be something good as its most user freindly
thanks

Help requried with outer joins

Hi All,
I neeed a query help can any one please help me getting this done,
for the below query
select trunc(assumed_time_sql) AS date1,sum(rp.rebate_due)as sum1 from mn_date_dim dd ,mn_rebate_payment rp,mn_prc_program prc,mn_structured_doc sd
where trunc(assumed_time_sql) in (TO_DATE('01-JUL-10','dd-mon-yy'),add_months(TO_DATE('01-JUL-10','dd-mon-yy'),-3),add_months(TO_DATE('01-JUL-10','dd-mon-yy'),-6),add_months(TO_DATE('01-JUL-10','dd-mon-yy'),-9))----input parameter
AND trunc(dd.assumed_time_sql)=TRUNC(rp.start_date)
AND prc.prc_program_id=rp.tiered_rebate_id
AND sd.struct_doc_id=prc.struct_doc_id
AND sd.struct_doc_id_num='M0000763'----input parameter
group by trunc(assumed_time_sql);
I am getting output as
date1      sum1
01-JAN-10      10
01-APR-10     15
01-JUL-10     20
But i want my output to be as
date1      sum1
01-JAN-10      10
01-APR-10     15
01-JUL-10     20
01-OCT-09 NULL
I have tried with outer joins but this didn't help me
Can any one please give me help in getting this done
Thanks

Hi,
As SB pointed out, you'd better provide tables and data in order to be helped more efficiently.
Anyway, you may want to investigate the use of NVL and/or DECODE so that you can translate NULL into valid values so they are returned to your select statement.
HTH,
Thierry
Handle: p78
Status Level: Newbie (10)
Registered: Mar 9, 2009
Total Posts: 60
Total Questions: 35 (30 unresolved) Be kind to share your helpful / correct threads with other with marking them as ANSWERED
Edited by: Urgent-IT on Feb 13, 2011 11:00 AM

CAN ANYONE HELP ME WITH LOGIC EXPRESS 7

I have just installed logic express 7 on my mac but for some reason none of the MIDI sounds are playing back through my speakers after i have made them in the matrix edit window. i know the program is playing the MIDI sounds because it is showing there is a signal in the tarck mixer window yet on on the transport bar it says there is no MIDI output, does anyone.
The same problem is occuring in my copy of cubase aswell which leads me to believe that there may be a problem with the MIDI settings on my mac,
ive tried everything i can think of to get it to work but its no good,
CAN ANYONE HELP ME
Much apreciated
armadacd55

Tom, some preliminary questions:
Have you gone through the Audio MIDI setup utility (not in Logic, in /Applications/Utilities) and set up your devices?
What are you using for an audio interface, a third-party interface (PCI card, USB or Firewire) or the Mac's built-in audio?
What are you trying to use to generate sound from the MIDI data - a soft-synth, the EXSP24 sample player, a Quicktime instrument, or an external sound module?

Urgent Help Needed with missing frames

Hi guys
I have a student with an urgent problem that I can't seem to fix.
The student is making a film having shot it on mini DV tape. He has been editing the film in Adobe Premiere Pro CS5.5, editing sections in different sequences.
The problem he is having is when he moves a selection of clips on his timeline random frames or half frames disappear, leaving a very quick flash to black.
I cant work out why the frames are disappearing when moving clips up and down the timeline, any suggestions?
Thanks
SteveG

The settings for a sequence cannot be changed once it is created.
If source footage is being interpreted wrongly, right-click the source file on the project panel and choose Modify > Interpret Footage. You can now create a new sequence that matches the real properties of your footage.
Dragging one sequence into another won't cure the problem; you have to copy the footage from the timeline into the new sequence so it reverts to the new sequence frame rate (assuming the footage has been defined properly in the project panel it will then be correct).

Urgent help needed with CP5 on Windows 7 64 bit and 'old' CP 5 projects.....

Hi,
I have a serious problem, at least the sympthoms are very serious.
I have worked on a lot of projects with CP 5 on Windows Vista Ultimate 32 bit.
CP5 was installed on the default root C:\Programs....
These projects partially contained recordings (demos, assessments...) of applications running on a Windows XP 64 computer.
Projects stored on E:\.....
All was OK
THEN:
I upgraded my OS to Windows 7 64 bit a couple of days ago.
D: and E: partitions were untouched by the new OS install.
Intalled CP5 on D:\..... not on default path C:\Programs...as I want to keep C: as clean as possible out of performance reasons.
All is OK except that:
- MINOR ISSUE: the projects on in the browser do not show assosiation to CP5 graphically as they used to in front of project name, this is the same for all other MasterSuite CS5 (also installed on D:...) applications too:
- MAJOR ISSUE: the demonstrations run properly but the results of action are graphically misplaced after generating the project:
Recording new demo projects on my system and generating them is OK
Can you please help to clarify and find solution so that my projects run properly.
Thanks in advance for your FAST help!!!!!
Stephanie

Hi there
My gut tells me it's not so much an issue with Captivate as it may be an issue with the new Windows 7 setup. You might try right-clicking the Windows 7 desktop and choosing Personalize. Then in the lower left corner of the dialog, choose Display. See if you are configured for 100% or if it's something different. If it's something different, try choosing 100% and see if it helps.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

I need urgent help for the logic

hi all,
Initially, the requirement was to create PO regardless the Purchase Requisition based on the formula
If (Open Qty + Current Stock) < Safety Stock ==>> THEN A PO NEEDS TO BE CREATED
This is absolutely fine, this created the PO as per the above condition.
OUR REQUIREMENT
Modify the same program to create PO's only if there is any PR for that material . Meaning, turn all the PR's into PO. Also, when creating PO, the delivery date should be = (Current date - 7 days) when creating a PO for an PR(I think the table name is VETVG.) Nothing else. We need to change the IF condition in the following code .
so can any one let me that what modification i need to do ie what logic i should use to get the requirement fullfilled.
*Report Z_STO_SAFETY_STOCK                                            *
Program Name : Z_STO_SAFETY_STOCK                                    *
Date         : 09.03.2007                                            *
Programmer   : Rajdeep Kumar
Last Change : Van Tran                22/03/2007                    *
Specification:                                                       *
Program Type : Report                                                *
Description : Create STO requirement for Plant
Transaction : None                                                  *
Input Files : None                                                  *
Output Files : None                                                  *
Scheduling Issues :                                                  *
Run Frequency :                                                      *
Mod#    Date          By            Description                      *
New   09.03.2007   Rajdeep Kumar     Created                         *
                   DEVK905890                                        *
M01   20.03.2007   Rajdeep Kumar     Material Group Added to         *
                   DEVK905892        Selection Screen                *
*Update 05.04.2007   DEVK906082        Added two new selection         *
                                     fields beskz and sobsl          *
                                     and is select statement         *
REPORT z_sto_safety_stock NO STANDARD PAGE HEADING.
*&                       TABLES
TABLES:
        t001w,
      marc.                                               " M01
        marc,                                               " M01
        mara.                                               " M01
*&                     DATA DECLARATION
DATA: BEGIN OF it_marc OCCURS 0,
        matnr LIKE marc-matnr,
        werks LIKE marc-werks,
        eisbe LIKE marc-eisbe,
      bstmi LIKE marc-bstmi,
        bstrf LIKE marc-bstrf,
        beskz LIKE marc-beskz,
        sobsl LIKE marc-sobsl,
      END OF it_marc.
DATA: BEGIN OF it_mard OCCURS 0,
        matnr LIKE mard-matnr,
        werks LIKE mard-werks,
        labst LIKE mard-labst,
      END OF it_mard.
DATA: BEGIN OF it_po OCCURS 0,
        ebeln LIKE ekko-ebeln,
        werks LIKE ekpo-werks,
        ebelp LIKE ekpo-ebelp,
        loekz LIKE ekpo-loekz,
        etenr LIKE eket-etenr,
        matnr LIKE ekpo-matnr,
        menge LIKE eket-menge,
        wemng LIKE eket-wemng,
      END OF it_po.
DATA: BEGIN OF it_po_2 OCCURS 0,
        matnr LIKE ekpo-matnr,
        werks LIKE ekpo-werks,
        ebeln LIKE ekko-ebeln,
        ebelp LIKE ekpo-ebelp,
        loekz LIKE ekpo-loekz,
        etenr LIKE eket-etenr,
        menge LIKE eket-menge,
        wemng LIKE eket-wemng,
      END OF it_po_2.
DATA: BEGIN OF it_po_pend OCCURS 0,
        matnr LIKE ekpo-matnr,
        werks LIKE ekpo-werks,
        pendi LIKE eket-menge,
      END OF it_po_pend.
DATA: BEGIN OF wa_join OCCURS 0,
        ebeln LIKE ekko-ebeln,
        werks LIKE ekpo-werks,
        ebelp LIKE ekpo-ebelp,
        loekz LIKE ekpo-loekz,
        etenr LIKE eket-etenr,
        matnr LIKE ekpo-matnr,
        menge LIKE eket-menge,
        wemng LIKE eket-wemng,
      END OF wa_join.
DATA : BEGIN OF itab_marc_mard OCCURS 0,
         werks LIKE marc-werks,
         matnr LIKE marc-matnr,
         eisbe LIKE marc-eisbe,
       bstmi LIKE marc-bstmi,
         bstrf LIKE marc-bstrf,
         beskz LIKE marc-beskz,
         sobsl LIKE marc-sobsl,
         labst LIKE mard-labst,
         menge LIKE ekpo-menge,
         ordqty LIKE ekpo-menge,
       END OF itab_marc_mard.
DATA: BEGIN OF it_sto OCCURS 0,
      werks LIKE mard-werks,
      matnr LIKE mard-matnr,
      orqty LIKE ekpo-menge,
      eisbe LIKE marc-eisbe,
    bstmi LIKE marc-bstmi,
      bstrf LIKE marc-bstrf,
      beskz LIKE marc-beskz,
      sobsl LIKE marc-sobsl,
      labst LIKE mard-labst,
      pendi LIKE eket-menge,
      END OF it_sto.
DATA: ws_poheader            LIKE   bapimepoheader.
DATA: ws_poheaderx           LIKE   bapimepoheaderx .
DATA: ws_ebeln               TYPE   mepoheader-ebeln.
DATA: ws_posnr               LIKE   ekpo-ebelp.
DATA: ws_etenr               LIKE   eket-etenr VALUE '0001'.
DATA: ws_purchaseorder       LIKE   ekko-ebeln.
DATA: ws_flg1                TYPE   c. " VALUE 'X'.
DATA: ws_flg2                TYPE   c.
DATA: ws_flg3                TYPE   c.
*-- For Handling Error Messages in BAPI
DATA: tbl_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
*-- For Item Details
DATA: tbl_poitem LIKE bapimepoitem OCCURS 0 WITH HEADER LINE.
DATA: tbl_poitemx LIKE bapimepoitemx OCCURS 0 WITH HEADER LINE.
DATA: tbl_posched LIKE bapimeposchedule OCCURS 0 WITH HEADER LINE.
DATA: tbl_poschedx LIKE bapimeposchedulx OCCURS 0 WITH HEADER LINE.
*&                       CONSTANTS
CONSTANTS:   ws_flg            TYPE   c   VALUE 'X'.
CONSTANTS:   c_unistruct(2)    TYPE   c   VALUE 'Z3'. "For UNISTRUCT STO
*&                      SELECTION-SCREEN
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_werks FOR t001w-werks,
              s_matnr FOR marc-matnr.                     " M01
                s_matnr FOR marc-matnr,                     " M01
                s_matkl FOR mara-matkl,                     " M01
                s_beskz FOR marc-beskz,
                s_sobsl FOR marc-sobsl.
PARAMETERS:     p_test TYPE check.
SELECTION-SCREEN : END OF BLOCK b1.
*&                      START OF SELECTION EVENT
START-OF-SELECTION.
Get the Safety Stock & Minimum Lot Size for the materials
PERFORM get_plant_data.
Get the Quantities in stock
PERFORM get_stock_data.
Determine the open quantities for the materials concerned
[EKKO, EKET, EKPO]
PERFORM get_open_quantities.
PERFORM open_quantities.
Determine overall the quantities required for each material
PERFORM determine_mat_qty_required.
Print the details
PERFORM print_details.
IF p_test EQ space.
PO is created for each plant.
Create the PO required.
    PERFORM create_po.
Create the PO's for each plant with the materials required
   PERFORM create_header_item.
Bapi call to create a Purchase order
   PERFORM create_purhase_order.
ENDIF.
END-OF-SELECTION.
TOP-OF-PAGE.
PERFORM print_header.
*&      Form get_plant_data
      To get the Safety Stock
--> p1        text
<-- p2        text
FORM get_plant_data .
start                                                     " M01
SELECT      matnr werks eisbe bstmi
INTO TABLE it_marc
FROM        marc
WHERE       matnr IN s_matnr AND
            werks IN s_werks AND
            eisbe GT 0.
end                                                       " M01
start                                                     " M01
SELECT      marc~matnr werks eisbe bstrf beskz sobsl
                                                          " bstmi
INTO TABLE it_marc
FROM        marc AS marc
INNER JOIN mara AS mara
ON          maramatnr EQ marcmatnr
WHERE       marc~matnr IN s_matnr AND
              werks      IN s_werks AND
              matkl      IN s_matkl AND
              beskz      IN s_beskz AND
              sobsl      IN s_sobsl AND
              eisbe      GT 0.
end                                                       " M01
ENDFORM.                    " get_plant_data
*&      Form get_stock_data
     To get the Current Stock
--> p1        text
<-- p2        text
FORM get_stock_data .
DATA: BEGIN OF lt_mard OCCURS 0,
          matnr LIKE mard-matnr,
          werks LIKE mard-werks,
          lgort LIKE mard-lgort,
          labst LIKE mard-labst,
        END OF lt_mard.
CHECK NOT it_marc[] IS INITIAL.
SELECT      matnr werks lgort labst
INTO TABLE lt_mard
FROM        mard
FOR         ALL ENTRIES IN it_marc
WHERE       matnr EQ it_marc-matnr AND
              werks EQ it_marc-werks.
SORT lt_mard BY matnr werks.
LOOP AT lt_mard.
    AT NEW werks.
      it_mard-matnr = lt_mard-matnr.
      it_mard-werks = lt_mard-werks.
    ENDAT.
    it_mard-labst = it_mard-labst + lt_mard-labst.
    AT END OF werks.
      APPEND it_mard.
      CLEAR it_mard.
    ENDAT.
ENDLOOP.
ENDFORM.                    " get_stock_data
*&      Form open_quantities
      text
--> p1        text
<-- p2        text
FORM open_quantities .
Storing MARC and MARD data in an internal table to find the open
quantities
LOOP AT it_marc.
    itab_marc_mard-matnr = it_marc-matnr.
    itab_marc_mard-werks = it_marc-werks.
    itab_marc_mard-eisbe = it_marc-eisbe.
itab_marc_mard-bstmi = it_marc-bstmi.
    itab_marc_mard-bstrf = it_marc-bstrf.
    itab_marc_mard-beskz = it_marc-beskz.
    itab_marc_mard-sobsl = it_marc-sobsl.
    READ TABLE it_mard WITH KEY matnr = it_marc-matnr.
    IF sy-subrc EQ 0.
      itab_marc_mard-labst = it_mard-labst.
    ENDIF.
    APPEND itab_marc_mard.
    CLEAR itab_marc_mard.
ENDLOOP.
CHECK NOT itab_marc_mard[] IS INITIAL.
Join EKKO EKPO
SELECT a~ebeln
         b~ebelp
         b~werks
         b~matnr
         b~menge
         c~etenr
         c~wamng
         INTO CORRESPONDING FIELDS OF TABLE it_po
FROM ekpo AS b
INNER JOIN ekko AS a
ON aebeln = bebeln
INNER JOIN eket AS c
ON bebeln = cebeln AND bebelp = cebelp
FOR ALL ENTRIES IN itab_marc_mard
WHERE b~matnr = itab_marc_mard-matnr AND
        b~werks IN s_werks .
DATA : t_menge TYPE ekpo-menge . "local variable
*Store the contents of it_po to the work area to get the minimum order
*quantity
wa_join[] = it_po[].
LOOP AT it_po.
delete the entries where MENGE = WAMNG
    DELETE it_po WHERE menge = it_po-wemng.
    LOOP AT wa_join WHERE matnr = it_po-matnr
                           AND werks = it_po-werks.
      t_menge = t_menge + wa_join-menge.
    ENDLOOP.
    it_po-menge = t_menge.
    MODIFY TABLE it_po TRANSPORTING menge.
    CLEAR :t_menge.
ENDLOOP.
Once you get the quantities delete the repeating materials for the
plant.
DELETE ADJACENT DUPLICATES FROM it_po COMPARING werks matnr.
SORT it_po BY matnr.
LOOP AT itab_marc_mard.
    READ TABLE it_po WITH KEY matnr = itab_marc_mard-matnr
        APPEND it_sto.
    ELSE.
      WRITE:/ 'There are no open quantities to create Purchase order'.
    ENDIF.
    CLEAR it_sto.
ENDLOOP.                         werks = itab_marc_mard-werks BINARY
SEARCH.
    itab_marc_mard-ordqty = itab_marc_mard-labst + it_po-menge .
     If Open quantiy + Current Stock < Safety Stock
    IF itab_marc_mard-ordqty LE itab_marc_mard-eisbe.
     Minimum order qty = Safety Stock - (Open qty + current stock)
      itab_marc_mard-ordqty = itab_marc_mard-eisbe - ( it_po-menge +
itab_marc_mard-labst ) .
       Move all the contents to the internal table it_sto ie Plant,
Material and the Min Order Qty
       so that we can create PO based on this internal table
      it_sto-matnr = itab_marc_mard-matnr.
      it_sto-werks = itab_marc_mard-werks.
      it_sto-orqty = itab_marc_mard-ordqty.
ENDFORM.                    " open_quantities
*&      Form CREATE_HEADER_ITEM
      text
FORM create_header_item.
LOOP AT it_sto.
*--- Document date with flag
    ws_poheader-doc_date             = sy-datum.
    ws_poheaderx-doc_date            = ws_flg.
*--- Document type with flag
    ws_poheader-doc_type             = 'Z3'(c01).
    ws_poheaderx-doc_type            = ws_flg.
*--- Purchasing group with Flag
    ws_poheader-pur_group            = '005'.   " hardcoded
    ws_poheaderx-pur_group           = ws_flg.
*--- Purchasing Organization with flag
    ws_poheader-purch_org            = '2000'.
    ws_poheaderx-purch_org           = ws_flg.
*--- Supply plant with flag
    ws_poheader-suppl_plnt           = '2000'.
    ws_poheaderx-suppl_plnt          = ws_flg.
*--- Company Code with flag
    ws_poheader-comp_code            = '2000'.
    ws_poheaderx-comp_code           = ws_flg.
*<--- assinging new item No.
    ws_posnr = ws_posnr + 10.
*POPULATE ITEM DATA.
    tbl_poitem-po_item                 = ws_posnr.
    tbl_poitem-material                = it_sto-matnr.
    tbl_poitem-item_cat                = 'U'(c02).
    tbl_poitem-plant                   = it_sto-werks.
    tbl_poitem-quantity                = it_sto-orqty.
    APPEND tbl_poitem.
    CLEAR tbl_poitem.
*POPULATE ITEM FLAG TABLE
    tbl_poitemx-po_item                = ws_posnr.
    tbl_poitemx-po_itemx               = ws_flg.
    tbl_poitemx-material               = ws_flg.
    tbl_poitemx-plant                  = ws_flg.
    tbl_poitemx-item_cat               = ws_flg.
    tbl_poitemx-quantity               = ws_flg.
    APPEND tbl_poitemx.
    CLEAR tbl_poitemx.
ENDLOOP.
ENDFORM.                    "CREATE_PO
*&      Form
      text
--> p1        text
<-- p2        text
FORM create_purhase_order .
CLEAR: tbl_poitem,
          tbl_poitemx,
          ws_poheader,
          ws_poheaderx.
REFRESH: tbl_poitem,
            tbl_poitemx.
CLEAR : tbl_return.
REFRESH: tbl_return.
*<--- Bapi to create Purchase order
IF NOT tbl_poitem[] IS INITIAL.
    CALL FUNCTION 'BAPI_PO_CREATE1'
      EXPORTING
        poheader         = ws_poheader
        poheaderx        = ws_poheaderx
      IMPORTING
        exppurchaseorder = ws_purchaseorder
      TABLES
        return           = tbl_return
        poitem           = tbl_poitem
        poitemx          = tbl_poitemx.
    READ TABLE tbl_return WITH KEY type = 'E'.
*<--- Bapi to commit the changes
    IF sy-subrc <> 0.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
    ENDIF.
ENDIF.
LOOP AT tbl_return.
*<--- Ignore the warning messages
    IF tbl_return-type = 'W'.
      CONTINUE.
    ENDIF.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    IF tbl_return-type = 'S'.
      FORMAT COLOR COL_POSITIVE ON.
    ELSEIF tbl_return-type = 'W'.
      FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
    ELSEIF tbl_return-type = 'E'.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED OFF.
    ENDIF.
    WRITE:/3 tbl_return-type,12 tbl_return-id,20(85) tbl_return-message
           86(10) tbl_return-field,95(20) tbl_return-system.
    FORMAT COLOR OFF.
ENDLOOP.
ENDFORM.                    " create_purhase_order
*&      Form get_open_quantities
      text
--> p1        text
<-- p2        text
FORM get_open_quantities .
CHECK NOT it_mard[] IS INITIAL.
SELECT      ekkoebeln ekpoebelp ekpowerks ekpomatnr
              ekpomenge eketetenr eket~wemng
              INTO CORRESPONDING FIELDS OF TABLE it_po
FROM        ekko AS ekko
INNER JOIN ekpo AS ekpo
ON          ekpoebeln EQ ekkoebeln
INNER JOIN eket AS eket
ON          eketebeln EQ ekpoebeln AND
              eketebelp EQ ekpoebelp
FOR         ALL ENTRIES IN it_mard
WHERE       ekko~bstyp EQ 'F'             AND
              ekko~bsart EQ 'Z3'            AND
              ekko~bsakz EQ 'T'             AND
              ekko~loekz EQ space           AND
              ekpo~matnr EQ it_mard-matnr   AND
              ekpo~werks EQ it_mard-werks   AND
              ekpo~loekz EQ space           AND
              ekpo~elikz EQ space.
SORT it_po BY ebeln ebelp etenr.
delete entries where the schedule is complete, else copy to new table
LOOP AT it_po.
    IF it_po-wemng GE it_po-menge.
      DELETE it_po.
    ELSE.
      MOVE-CORRESPONDING it_po TO it_po_2.
      APPEND it_po_2.
      CLEAR it_po_2.
    ENDIF.
ENDLOOP.
SORT it_po_2 BY matnr werks.
To determine the pending quantities of the materials at plant level
LOOP AT it_po_2.
    AT NEW werks.
      it_po_pend-matnr = it_po_2-matnr.
      it_po_pend-werks = it_po_2-werks.
    ENDAT.
    it_po_pend-pendi = it_po_pend-pendi + it_po_2-menge - it_po_2-wemng.
    AT END OF werks.
      APPEND it_po_pend.
      CLEAR it_po_pend.
    ENDAT.
ENDLOOP.
ENDFORM.                    " get_open_quantities
*&      Form determine_mat_qty_required
      text
--> p1        text
<-- p2        text
FORM determine_mat_qty_required .
DATA: lv_eisbe LIKE marc-eisbe,
        lv_labst LIKE mard-labst,
        lv_menge LIKE eket-menge,
      lv_bstmi_old LIKE marc-bstmi,
        lv_bstrf_old LIKE marc-bstrf,
        lv_beskz_old LIKE marc-beskz,
        lv_sobsl_old LIKE marc-sobsl,
        lv_pendi LIKE eket-menge,
        lv_total_conf     LIKE ekpo-menge,
      lv_bstmi          LIKE marc-bstmi,
      lv_min_qty        LIKE marc-bstmi,
        lv_bstrf          LIKE marc-bstrf,
        lv_min_qty        LIKE marc-bstrf,
        lv_qty_req        LIKE mard-labst,
        lv_remainder      TYPE i.
LOOP AT it_marc.
safety stock
    lv_eisbe = it_marc-eisbe.
   lv_bstmi_old = it_marc-bstmi.
     lv_bstrf_old = it_marc-bstrf.
     lv_beskz_old = it_marc-beskz.
     lv_sobsl_old = it_marc-beskz.
    READ TABLE it_mard
    WITH KEY matnr = it_marc-matnr
             werks = it_marc-werks
             BINARY SEARCH.
    IF sy-subrc EQ 0.
    qty onhand
      lv_labst = it_mard-labst.
    ELSE.
      CLEAR lv_labst.
    ENDIF.
    READ TABLE it_po_pend
    WITH KEY matnr = it_marc-matnr
             werks = it_marc-werks
             BINARY SEARCH.
    IF sy-subrc EQ 0.
    PO pending qty
      lv_pendi = it_po_pend-pendi.
    ELSE.
      CLEAR lv_pendi.
    ENDIF.
Total qty on hand & PO qty pending
    lv_total_conf = lv_labst + lv_pendi.
Now determine if a PO is required for the material concerned.
    IF lv_total_conf < lv_eisbe.
      it_sto-matnr = it_marc-matnr.
      it_sto-werks = it_marc-werks.
      it_sto-eisbe = lv_eisbe.
    it_sto-bstmi = lv_bstmi_old.
      it_sto-bstrf = lv_bstrf_old.
      it_sto-beskz = lv_beskz_old.
      it_sto-sobsl = lv_sobsl_old.
      it_sto-labst = lv_labst.
      it_sto-pendi = lv_pendi.
    Actual Qty Required
      lv_qty_req = lv_eisbe - lv_total_conf.
     IF it_marc-bstmi IS INITIAL.
       IF it_marc-bstrf IS INITIAL.
        it_sto-orqty = lv_qty_req.
      ELSE.
       lv_bstmi = it_marc-bstmi.
       lv_min_qty = it_marc-bstmi.
         lv_bstrf = it_marc-bstrf.
         lv_min_qty = it_marc-bstrf.
        DO.
          IF lv_qty_req <= lv_min_qty.
            lv_qty_req = lv_min_qty.
            it_sto-orqty = lv_qty_req.
            EXIT.
          ELSE.
           lv_min_qty = lv_min_qty + lv_bstmi.
             lv_min_qty = lv_min_qty + lv_bstrf.
          ENDIF.
        ENDDO.
      ENDIF.
      APPEND it_sto.
      CLEAR it_sto.
    ENDIF.
ENDLOOP.
SORT it_sto BY werks matnr.
ENDFORM.                    " determine_mat_qty_required
*&      Form print_details
      text
--> p1        text
<-- p2        text
FORM print_details .
LOOP AT it_sto.
    WRITE:/ it_sto-werks UNDER text-h01,
            it_sto-matnr UNDER text-h02,
            it_sto-orqty UNDER text-h03,
            it_sto-eisbe UNDER text-h04,
          it_sto-bstmi UNDER text-h05,
            it_sto-bstrf UNDER text-h05,
            it_sto-labst UNDER text-h06,
            it_sto-pendi UNDER text-h07.
ENDLOOP.
ENDFORM.                    " print_details
*&      Form print_header
      text
--> p1        text
<-- p2        text
FORM print_header .
WRITE: AT 001 text-h01,
             015 text-h02,
           030 text-h03,
           050 text-h04,
           070 text-h05,
           090 text-h06,
           110 text-h07.
             030 text-h03 RIGHT-JUSTIFIED,
             050 text-h04 RIGHT-JUSTIFIED,
             070 text-h05 RIGHT-JUSTIFIED,
             090 text-h06 RIGHT-JUSTIFIED,
             110 text-h07 RIGHT-JUSTIFIED.
NEW-LINE.
ENDFORM.                    " print_header
*&      Form create_po
      text
--> p1        text
<-- p2        text
FORM create_po .
*-Document date with flag
ws_poheader-doc_date             = sy-datum.
ws_poheaderx-doc_date            = ws_flg.
*-Document type with flag
ws_poheader-doc_type             = 'Z3'(c01).
ws_poheaderx-doc_type            = ws_flg.
*-Purchasing group with Flag
ws_poheader-pur_group            = '005'.   " hardcoded
ws_poheaderx-pur_group           = ws_flg.
*-Purchasing Organization with flag
ws_poheader-purch_org            = '2000'.
ws_poheaderx-purch_org           = ws_flg.
*-Supply plant with flag
ws_poheader-suppl_plnt           = '2000'.
ws_poheaderx-suppl_plnt          = ws_flg.
*-Company Code with flag
ws_poheader-comp_code            = '2000'.
ws_poheaderx-comp_code           = ws_flg.
LOOP AT it_sto.
    AT NEW werks.
      CLEAR tbl_poitem.
      CLEAR tbl_poitemx.
      CLEAR tbl_return.
      CLEAR tbl_posched.
      CLEAR tbl_poschedx.
      REFRESH tbl_poitem.
      REFRESH tbl_poitemx.
      REFRESH tbl_return.
      REFRESH tbl_posched.
      REFRESH tbl_poschedx.
      CLEAR ws_posnr.
    ENDAT.
    ws_posnr = ws_posnr + 10.
Item Data
    tbl_poitem-po_item                 = ws_posnr.
    tbl_poitem-material                = it_sto-matnr.
    tbl_poitem-item_cat                = 'U'(c02).
    tbl_poitem-plant                   = it_sto-werks.
    tbl_poitem-quantity                = it_sto-orqty.
    APPEND tbl_poitem.
    CLEAR tbl_poitem.
Item X Data
    tbl_poitemx-po_item                = ws_posnr.
    tbl_poitemx-po_itemx               = ws_flg.
    tbl_poitemx-material               = ws_flg.
    tbl_poitemx-plant                  = ws_flg.
    tbl_poitemx-item_cat               = ws_flg.
    tbl_poitemx-quantity               = ws_flg.
    APPEND tbl_poitemx.
    CLEAR tbl_poitemx.
Schedule Data
    tbl_posched-po_item = ws_posnr.
    tbl_posched-sched_line = '0001'.
    tbl_posched-delivery_date = sy-datum.
    tbl_posched-quantity = it_sto-orqty.
    APPEND tbl_posched.
    CLEAR tbl_posched.
Schedule Data X
    tbl_poschedx-po_item = ws_posnr.
    tbl_poschedx-po_itemx = ws_flg.
    tbl_poschedx-sched_line = '0001'.
    tbl_poschedx-sched_linex = ws_flg.
    tbl_poschedx-delivery_date = ws_flg.
    tbl_poschedx-quantity = ws_flg.
    APPEND tbl_poschedx.
    CLEAR tbl_poschedx.
    AT END OF werks.
    Create the PO
      CALL FUNCTION 'BAPI_PO_CREATE1'
        EXPORTING
          poheader         = ws_poheader
          poheaderx        = ws_poheaderx
        IMPORTING
          exppurchaseorder = ws_purchaseorder
        TABLES
          return           = tbl_return
          poitem           = tbl_poitem
          poitemx          = tbl_poitemx
          poschedule       = tbl_posched
          poschedulex      = tbl_poschedx.
      LOOP AT tbl_return WHERE type EQ 'E' OR type EQ 'A'.
        EXIT.
      ENDLOOP.
    If Loop is false - then no error occurred
      IF sy-subrc NE 0.
      No Errors - Commit
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
      ENDIF.
      SKIP.
      LOOP AT tbl_return.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        IF tbl_return-type = 'E' OR tbl_return-type = 'A'.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED OFF.
        ELSEIF tbl_return-type = 'W'.
          FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
        ELSE.
          FORMAT COLOR COL_POSITIVE ON.
        ENDIF.
        WRITE:/3 tbl_return-type,12 tbl_return-id,20(85)
tbl_return-message,
               86(10) tbl_return-field,95(20) tbl_return-system.
        FORMAT COLOR OFF.
      ENDLOOP.
    ENDAT.
ENDLOOP.
ENDFORM.                    " create_po

Hi,
first you can store these 2 dates into some internal table sat it_sobid and it_ObjectID.Now
sort it_sobid ascending.
loop at it_ObjectID.
Read date from it_sobid binary search index sy-index.
it_ObjectID-date = it_sobid-date.
flag = 'y'.
endloop.
you can write some logic like this. Its just a rough idea you can modify according to ur need.
Regards,
Ravi

Urgent Help : Problem with Native MQ Adapter

We are receiving messages via MQ Series with a message format based on a COBOL copybook. We specified the layout in Fusion using the native feature of incorporating a COBOL copybook. However, if the data is not in the specified format – i.e., too long, too short, or containing invalid characters – then the adapter fails and throws the error in the log file (OC4J log) and never consumes the message from the queue. The key phrase there was “never consumes the message from the queue.” When this situation occurs our BPEL process continually processes the same message over and over (i.e., an infinite loop).
JCA: ORABPEL-11162
Error while reading native data.
[Line=1, Col=1] Not enough data available in the input, when trying to read data of length "30" for "element with name CREATIONUSERID" from the specified position, using "style" as "fixedLength" and "length" as "30".
Ensure that there is enough data from the specified position in the input.
We are looking for a solution to this problem.
Thanks in advance for the help

I am not sure if this would help but you can try retrieving the message as "Native format translation is not required i.e. Opaque" instead of defining the exact format (COBOL copybook format). Once you have the message in the BPEL process then you can map it to the COBOL copybook after doing the validation.
Not sure if this is a viable solution as I have not tried it myself.

Urgent help need with Spry Submenu Bar

Am new to Dreamweaver and do not use code. Am trying to align spry submenus directly below their respective spry menu bars. Please advise as to what CSS style I need to modify and what I should necessarily modify within that style.
Thank you.

Am new to Dreamweaver and do not use code.
Welcome to Dreamweaver. If you don't use code, now is the time to start learning. Otherwise, everything you do in Dreamweaver is going to be an uphill struggle. Dreamweaver is a professional web development tool that requires at least a basic knowledge of both HTML and CSS. You can find a lot of CSS tutorials in the Adobe Developer Connection at http://www.adobe.com/devnet/dreamweaver/css.html.
Spry submenus automatically line up with the main menu items, so it sounds as though you have done something to knock them out of alignment. The only way that anyone can help with design issues is for you to upload the problem page to a site, and post the URL here. Since you're new to both Dreamweaver and the forum, take a few moments to check out How to get help quickly and the Dreamweaver FAQ. Both should save you some time.

Urgent Help Requried with Logic

Similar Messages

Maybe you are looking for