!!URGENT!!HELP!! Transfer of IDOCs using ABAP Port to Partner
I am trying to transfer idocs using an ABAP port (with a FM assigned) to Partner system( APO 4.0). The idocs are successfully posted in SAP R/3 sender sytem(ERP2004) and passed to ABAP port. I receive a success message " IDOCs transferred to Function module&" in BD87.However, the idocs are not being processed by the port into the receiving system. The idocs never reach receiving system.
Is there a background process/event which needs to be run to trigger this ?
This works fine in our QA but not in our Dev. system.
Message was edited by: shankar krishnamurthy
Shankar,
As per my understanding,
<b>IDOCs transferred to Function module&</b> in BD87.
This message your checking in receiving system.
why dont you check the partner profile in receiving end.
there might be the settings here choosed for Background process.
If yes, please check there might be background activity or program scheduled to process at a given time.
As you have the QA system working fine. compare the settings.
that will be the easiest way.
<u>THIS is for my information </u>
why are you using the ABAP port.
Is there any unique funtionlaity given by this.
if you have info., i would like to know.
Regards
Satheesh
Similar Messages
-
I am trying to transfer idocs using an ABAP port (with a FM assigned) from R/3 to Partner system( APO 4.0). The idocs are successfully posted in SAP R/3 sender sytem(ERP2004) and passed to ABAP port. I receive a success message " IDOCs transferred to Function module&" in BD87.However, the idocs are not being processed by the port into the receiving system. The idocs never reach receiving system.
Is there a background process/event which needs to be run to trigger this ?
This works fine in our QA but not in our Dev. system.Shankar,
As per my understanding,
<b>IDOCs transferred to Function module&</b> in BD87.
This message your checking in receiving system.
why dont you check the partner profile in receiving end.
there might be the settings here choosed for Background process.
If yes, please check there might be background activity or program scheduled to process at a given time.
As you have the QA system working fine. compare the settings.
that will be the easiest way.
<u>THIS is for my information </u>
why are you using the ABAP port.
Is there any unique funtionlaity given by this.
if you have info., i would like to know.
Regards
Satheesh -
Not possible to transfer idocs from R/3 to another R/3 using ABAP port
I am trying to transfer idocs using an ABAP port (with a FM assigned) to Partner system( APO 4.0). The idocs are successfully posted in SAP R/3 sender sytem(ERP2004) and passed to ABAP port. I receive a success message " IDOCs transferred to Function module&" in BD87.However, the idocs are not being processed by the port into the receiving system. The idocs never reach receiving system.
Is there a background process/event which needs to be run to trigger this ?
This works fine in our QA but not in our Dev. system.When I run the FM using SE37 manually, I am able to process the idoc into the receiving system. This should happen automatically.
I checked the partner profiles in receiving system and they appear to be fine. I generated the partner profiles using BD64 ( distribution model)
Is there a background process or event which would trigger this automatic process of triggering the FM at the port to transfer the idoc to receiving system? -
IDOC--XI--IDOC Using ABAP MAPPING
Hi all,
My requirement is to map source IDOC fields to target IDOC fields using ABAP Mapping.
few fields in source idoc structure has to be merged into a single field in target idoc structure.
need help on how to start with as i am not exposed to ABAP Mapping.
regards,
SubbaHi Subba,
I suggest you also go through these links:
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/r.eijpe/blog
ABAP Mapping Vs Java Mapping.
Re: Message Mapping of type ABAP Class not being shown
Re: Performance of mappings (JAVA, XSLT, ABAP)
Refer to following SDN Demo which explains the need and how to do the ABAP mapping.
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#jdi [original link is broken]
This document will help you to create ABAP Mapping.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
Regards,
Abhy
Message was edited by: Abhy Thomas -
Help Urgent : Invoking SMS Web Services Using ABAP FM HTTP_POST
Dear Gurus,
Our client requirement is in such a way that ,
They want to invoke web services for sending SMS through ABAP program.
Please suggest the way .
I am using FM HTTP_POST in order to call the URL for web service for SMS.
My URL is as follows,
'http://IP ADDRESS :PORT /invoke/crm_sms/send_crm_sms?&mobile_no=9987536748&message=HI' .
and my code is as follows,
========================================================================
report ztesturl.
data : begin of t_request_body occurs 0 ,
body(1025),
end of t_request_body.
data : begin of t_request_header occurs 0 ,
body(1025),
end of t_request_header.
data : str(20) value '9987536748' ,int(20) value 'text',uri(460),
status_code(100),
status_text(100),
len type i.
data : begin of t_response_body occurs 0 ,
body(1025),
end of t_response_body.
data : begin of t_response_header occurs 0 ,
body(1025),
end of t_response_header.
uri = 'http://IP ADDRESS :PORT /invoke/crm_sms/send_crm_sms?mobile_no=9987536748&message=HI' .
concatenate 'mobile_no=' str into t_request_body-body.
append t_request_body.
concatenate 'message=' int into t_request_body-body.
append t_request_body.
move: url to t_request_header-body.
append t_request_header.
call function 'HTTP_POST'
exporting
absolute_uri = uri
request_entity_body_length = 300
blankstocrlf = 'X'
proxy = 'IP Address:Port' ===> Same as Interner Tools -> Connection
proxy_user = EMAIL ID ===> Which i am using Userid for Internet
proxy_password = 'password123'
importing
status_code = status_code
status_text = status_text
response_entity_body_length = len
tables
request_entity_body = t_request_body
request_headers = t_request_header
response_entity_body = t_response_body
response_headers = t_response_header.
I am getting Following log in t_response_body
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 3 5
ERROR
6
Cache Accesss
7
8
9 While trying to retrieve the URL: 10 http://IP ADDRESS :PORT /invoke/crm_sms/send_crm_sms?
11
12 The following error was encountered:
13
14
15 16 Cache Access Denied. 17 18
19
20 21
Sorry, you are not currently allowed to request: 22
http://IP ADDRESS :PORT /invoke/crm_sms/send_crm_sms?
23 from this cache until you have authenticated yourself. 24
25 26
27 You need to use Netscape version 2.0 or greater, or Microsoft Internet 28 Explorer 3.0, or an HTTP/1.1 compliant browser for this to work. Please 29 contact the cache administrator if you have 30 difficulties authenticating yourself or
31 change your default password.
32
33
34
35
36 Generated Thu, 26 Jun 2008 11:18:54 GMT by ProxyServer.VakolaProxy (Squid/2.4.STABLE7) 37
Thanks in advance.
With Regards,
Rajesh Cslen = strlen( user ).
call 'AB_RFC_X_SCRAMBLE_STRING'
id 'SOURCE' field user id 'KEY' field key
id 'SCR' field 'X' id 'DESTINATION' field user
id 'DSTLEN' field slen.
slen = strlen( password ).
call 'AB_RFC_X_SCRAMBLE_STRING'
id 'SOURCE' field password id 'KEY' field key
id 'SCR' field 'X' id 'DESTINATION' field password
id 'DSTLEN' field slen. -
Urgent help required: color template - use color ramp instead
hello,
I want to match color using the color matching vi. i understand you need a color template before executing the system.
however i want to give my users the chance to choose any color from a color ramp and then this should be used an input to the color match vi (template). is this possible????
if yes how... i have put a color ramp in the front panel and then put the output to the input of the color match template but get an error: not a template...
thanksHi farhan,
Can you please send in some example code, as I can not find the VI you are talking about. The closest match I have is IMAQ Color Match and this does not have a template input.
Please can you also tell me what version of LabVIEW you are using as well.
Regards
JamesC
NIUK and Ireland -
Urgent help on conditional formatting using XML publisher
Folks can any one help me. I am trying to do conditional format in my xml publisher rtf template and I am having issues to render data in specific format. Please see the sample xml file
<?xml version="1.0" encoding="UTF-8"?>
<ColTrn:CollegeTranscript xmlns:AcRec="urn:org:pesc:sector:AcademicRecord:v1.0.0" xmlns:ColTrn="urn:org:pesc:message:CollegeTranscript:v1.0.0" xmlns:UseExt="urn:org:pesc:useextensions" xmlns:core="urn:org:pesc:core.CoreMain:v1.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:org:pesc:message:CollegeTranscript:v1.0.0 http://www.regents.state.oh.us/articulation_transfer/AT/ATC/XML/Standards/Postsecondary/Transcript/v1.0.0/CollegeTranscript_v1.0.0.xsd urn:org:pesc:useextensions http://www.regents.state.oh.us/articulation_transfer/AT/ATC/XML/Standards/Postsecondary/Transcript/v1.0.0/OBRExtensions_v1.0.0.xsd">
<Student>
<Person>
<SchoolAssignedPersonID>0001567740</SchoolAssignedPersonID>
<Name>
<FirstName>WENDELL</FirstName>
<MiddleName>ROBERT</MiddleName>
<LastName>MORRISON</LastName>
</Name>
</Person>
<AcademicRecord>
<AcademicAward>
<AcademicAwardLevel>2.4</AcademicAwardLevel>
<AcademicAwardDate>2004-03-20</AcademicAwardDate>
<AcademicAwardTitle>BACHELOR OF SCIENCE IN EDUCATION</AcademicAwardTitle>
<AcademicCompletionIndicator>true</AcademicCompletionIndicator>
<AcademicCompletionDate>2004-03-20</AcademicCompletionDate>
<AcademicAwardProgram>
<AcademicProgramType>Major</AcademicProgramType>
<AcademicProgramName>INTEGRATED SOCIAL STUDIES (BS6308)</AcademicProgramName>
</AcademicAwardProgram>
<AcademicAwardProgram>
<AcademicProgramType>Minor</AcademicProgramType>
<AcademicProgramName>PSYCHOLOGY (OR4101)</AcademicProgramName>
</AcademicAwardProgram>
<NoteMessage>EDUCATION AND HUMAN SERVICES</NoteMessage>
<AcademicSummary>
<AcademicSummaryType>SenderOnly</AcademicSummaryType>
<AcademicSummaryLevel>Undergraduate</AcademicSummaryLevel>
<GPA>
<GradePointAverage>2.835</GradePointAverage>
</GPA>
<ClassRank>408</ClassRank>
<ClassSize>533</ClassSize>
</AcademicSummary>
</AcademicAward>
<AcademicAward>
<AcademicAwardLevel>2.4</AcademicAwardLevel>
<AcademicCompletionIndicator>false</AcademicCompletionIndicator>
<AcademicAwardProgram>
<AcademicProgramType>Minor</AcademicProgramType>
<AcademicProgramName>HISTORY (OR4211)</AcademicProgramName>
</AcademicAwardProgram>
</AcademicAward>
</Student>
</ColTrn:CollegeTranscript>
I am trying to generate the output in the below format -
[ The University Degrees Conferred section is printed if /AcademicRecord/AcademicAward/AcademicCompletionIndicator = true and AcademicProgramType = 'Major' Then ]
********** UNIVERSITY DEGREE(S) CONFERRED ******************
DATE : Mar 20, 2004 => <AcademicAwardDate>
COLLEGE : EDUCATION AND HUMAN SERVICES => <NoteMessage>
DEGREE : BACHELOR OF SCIENCE IN EDUCATION => <AcademicAwardTitle>
PROGRAM(S) : INTEGRATED SOCIAL STUDIES (BS6308) => <AcademicProgramName>
ACCUM GPA : 2.835 => AcademicSummary/GPA/GradePointAverage
GRAD RANK : 408 IN TOTAL OF 533 => <ClassRank> and <ClassSize>
[ The below section should print if the student has AcademicProgramType = 'Minor' and Academiccompletionindicator = true ]
******OTHER UNIVERSITY PROGRAM(S) COMPLETED******
DATE Mar 16, 2002 PROGRAM : PSYCHOLOGY (OR4101) => <AcademicProgramName> where AcademicProgramType = 'Minor'
[ The below section should print if Academiccompletionindicator = false print all majors and minors.
CURRENT PROGRAM(S) OF STUDY
PROGRAM(S) : HISTORY (OR4211)
=> AcademicProgramName where AcademicAward/AcademicCompletionIndicator = 'false'
Please help me guys. I really appreciate your help.
Thanks
PradeepI have sent you a modified template. Please take a look.
Assign points and close out the thread if you are satisfied.
Thanks,
Bipuser -
Urgent Help Needed .. SP ABAP 12
Hi,
I am appling CRM 5.0 ABAP Patch level 12 component support patches. I am getting an error while in IMPORT_PROPER step Error message is "R3TRWAPAIC_BASE was repaired in this system
Thanks
SureshHello Suresh
Pls see this forum which contains the ABAP SP12 Central Note which can give you some input to your problem.
/thread/431284 [original link is broken]
Thanks
Chandran -
Urgent help needed---File upload using struts
can anyone helpme out on how to perform FileUpload operation using struts
deepakHi,
You should use<html:file> tag for uploading file through struts. And make sure that in form bean u need to manipulate this property with FormFile type. provide getter and setter in form bean for this one and manipulate it in your action class.
let me know if u have any further issue..
Tushar -
Idoc - JMS queue using ABAP Mapping
Hi all,
I am doing a idoc to JMS queue scenario using ABAP Mapping. I am new to ABAP
Basically i want to know how to read the OUTBOUND idoc segments and their field values. I have gone through link : IDOC--XI--IDOC Using ABAP MAPPING(Idoc to Idoc using ABAP Mapping).
If any body could suggest me how to read idoc->segment->fields or give some sample code, it would be very helpful.
Thanks in advance&
Regards,
ManiHi Mani,
Maybe it would be easier to use graphical mapping. In ABP mapping you have to parse XML and than create target document. If you want to do it I'd strongly advice you to read it:
http://help.sap.com/saphelp_nw04/helpdata/en/47/b5413acdb62f70e10000000a114084/frameset.htm
Regards,
Wojtek -
Hello Experts,
My problem is related to Idoc generation using ABAP Port Type.
In the creation of ABAP Port, one Z function module is assigned which has the code to generate another Idoc(MASTER_IDOC_DISTRIBUTE is used inside).
The problem is, I am able to create the first Idoc using this ABAP Port, and in the status, the first Idoc reached 03 with a message that this Idoc number reached the Zfunction module(which is assigned to port). But I'm unable to see the second Idoc generated. Even I am not sure whether this second Idoc generated or not.
Can you please explain how this ABAP Port type behaves, how to get this function module (which is assigned to port) into debugging mode and help me to solve this.
Regards
SunilHello Radha,
Thankyou very much for your reply.
Even though we keep a break point inside the Function Module it will not come into debugging mode. It needs a different procedure.
I will explain again what my requirement is.
We have a port defined as ABAP Port (Not tRFC and not File Port ). While creating this ABAP Port it never asks for RFC destination, but it asks for a Function Module. So we have given that function module also. ( Basically this Function module creates Idocs using MASTER_IDOC_DISTRIBUTE afetr the original Idoc is created and sent to this port. )
So Initially we have generated one Idoc thru shipment which is sent to this ABAP Port. Immediately on reaching this port we got a message that this first Idoc reached this ABAP port and reached the Function Module. But we dont see any new Idocs created using this function module.
We used this Function module in a zprogram and created Idocs which means that the code in FM is working perfectly.
Now the problem is we are not sure whether the firstly created IDoc (on reaching the port) is triggering this Function module or not. We have checked WE02 if any new Idocs created after the initially created Idoc. But we found nothing. The one we created is the latest.
So can anybody explain how this function module (mandatory to give while creating ABAP port) gets triggered? And how can we get this FM in to debugging mode. Is there any link missing out there while defining ABAP port? Please explain.
Thanks you
Best Regards
Sunil -
Need Information for transporting a file as IDOC through File Port!!!
Hi,
All configurations are present in the system to transfer a file as IDOC using File Port.
Now we are creating a custom program to transfer the same. Now i have all the data in an internal table which has to be send to Non SAP system. So can i know the process how to send the same.
I have a SAP Directory where i need to place the system. I also have all ports required.
So please let me know how to code the same ASAP.
Thanks and Regards,
sagar..You may want to try using the IDOC Test tool WE19 in order to test out your ports and partner profiles.
Also sending from SAP to XI / PI you might be better configuring RFC Destination / SM59.
See this Wiki for more info...
http://wiki.sdn.sap.com/wiki/display/XI/ALE+Configuration -
How to process an IDoc using qRFC of version 6.30.060
Hi all,
Can anyone please tell me how can we process an IDoc using qRFC port of version 6.30.060.
In this version 'Queue Processing' option in WE20 is missing and transaction WE85 is also not available.
thanks & regards
PiyaliHI Piyali,
Check out these links. THey will surely help...
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE2/BCFESDE2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE5/BCFESDE5.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESRFC/BCFESRFC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE4/BCFESDE4.pdf
Re: SM59
If you find this answer useful, please reward me for the same.
Good luck
Karthik Potharaju -
Urgent help needed!! Layout table and Draw layout cell dissapeared.
I need some urgent help. I'm using CS3 but for a while my
Layout Table and Draw Layout Cell icons appear greyed and can't use
them at all. Is there any kind soul out there who knows how to fix
this? I'm going nuts trying all the possible options but none seem
to work.
Help please!!!!!!> How would you about designing a page without using html?
You don't. But I don't recall suggesting that you not use
HTML. I just
suggested that you use best-practice HTML, no? Or maybe you
meant to ask
how you would go about building your site without learning
HTML? In that
case, I think you are outta luck. Using DW without knowing
HTML is a very
punishing experience, I'm afraid.
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
I'd prefer Cristal, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Untersberg" <[email protected]> wrote in
message
news:g4tj9a$m5o$[email protected]..
> Ahhhhhh!!!!! They came up!!!! They came up again!!
> I was on standard mode. Now going back to your
suggestion, which I really
> appreciate. How would you about designing a page without
using html? I'm
> just
> redesigning my website at the moment and need it to get
going urgently,
> hence
> the reluctance to start learning HTML at the moment.
I'll do after but I
> need
> to get this up and running fairly quickly.
>
> Cheers.
>
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
> -
Need urgent help!!!! (combine prompt and formula)
Hi,
I am using Oracle Business Intelligence 10.1.3.3.2, and creating some reports from answers. I desperately need to combine
prompt and formula on some column.
I need to use prompt in my formula on some column.
Need urgent help !You can use the presentation variables to pass the value of the prompt into the report or any column formula.
In the dashboard prompt you see an option called "Set Variable" where and you need to give a name to the variable.(Say Var_value)
Now the value of the variable can be simply referenced using the syntax @{var_name}{10}. Here '10' being the defualt value which is optional you can simply reference using @{var_name} and you have the value of the prompts passed.
Hope it works
Thanks
Prash
Maybe you are looking for
-
My husband and I share music in one itunes account for both of our iphones. We just got the new iphone 5s's and iin ttryinngto back up our old phones I have realized we SHARE one icloud as well. Can I create him a new icloud for pictures, contacts
-
System error in program CL_RSR_WWW_PAGE
Hi BW gurus! when i try to export to excel from my report "Logistic dahsboard ", i have this error message : "System error in program CL_RSR_WWW_PAGE and form 01EXPORT_DATA:01 " SAP doesn't give any notes. Can anyone help me? Dev
-
More than one map number per topic?
I have been asked to create context sensitive help with RoboHelp6. Is it possible to create bookmarks in a topic and have different map numbers open to these different bookmarks in the same topic OR does each map number have to have one unique topic?
-
Why Does Bluetooth Sound Like Pure Crap in OS X?
Using a brand new pair of Bluetooth Headphones running 4.0 with A2DP and a complete stack of other profiles. Headphones sound amazing on my iPhone 5 and other devices (such as my iPad and Nexus) but they sound tragic on my MB Air 10.8 I've manually c
-
I put files in the bin! and 20 seconds later its comeback again on may harddisk very strange!! any one have a solution?