Urgent: how to get filtered records in ALV
Hi
I have used ALV in OO context. However when i apply the filter and get the filtered entries on the screen, I want to get these filtered records into an internal table. How do I do this. I have tried using the methods GET_FILTERED_ENTRIES and GET_FILTER_CRITERIA, but it does not work. Please help me in getting the filtered records into an internal table.
Thanks
Vijay
You can use REUSE_ALV_GRID_LAYOUT_INFO_GET to get the information about the layout, including the filter criteria, then use that to figure out which records to process.
Similar Messages
-
How to get f4 help in alv grid in container-urgent
hi,
how to get f4 help in alv grid in container using abap objects
ganeshHi Ganesh,
Did you have a look at sample report BCALV_TEST_GRID_F4_HELP ?
Here is part of the header documentation:
*& Report BCALV_GRID_F4_HELP *
Purpose:
~~~~~~~~
This report illustrates the use of f4-Help in an alv grid control.
Background:
~~~~~~~~~~~
There a two possibilities to implement an f4-Help in the alv grid
control: one can either use standard f4-help or write one by Hand.
For the former there is nothing to do at all. This report shows how
to implement user-defined f4-help.
I am sure you will find within this report the solution you are looking for.
Reward points if this Helps.
Manish -
How to get the records of the particluar day when delta laod failed (Urgent
Hello BW Gurus,
We are facing one serious issue. Here is the scenario.
1st time the Delta was init and for next consective two loads delta ran sucessfully... then next time delta got failed and the status is in red..... even though system started next delta loading and it has fetched the records and status is in green but not activated ,,,,,its happening still past one month so almost there are 20 requests which are to be get activatetd.
How to resolve this issue.
<b>And how to get the records of the partilcular day when the delta got failed.
</b>
Anyone have come across with this strange issue then help me out and i will rewarrd the points.
Urs,
Raki.Hi
Can you provide more details about your extractor and data targets.
Are you loading delta to an ODS ??
If you are loading to an ODS, The only solution i can see is to get the missing delta records via FULL UPDATE. Because if you delete the error request from ODS it will also delete the 20 successful requests above it.
Cheers
Praveen
null -
How can we sort records in alv, give example
how can we sort records in alv, give example
Hi
<b>Setting Sort Conditions</b>
It is possible to set sort conditions for the table data. This is achieved by filling an internal table of structure LVC_T_SORT which consists of the sort criteria. To have an initial sorting, pass it to the parameter IT_SORT of the method set_table_for_first_display.
FORM prepare_sort_table CHANGING pt_sort TYPE lvc_t_sort .
DATA ls_sort TYPE lvc_s_sort .
ls_sort-spos = '1' .
ls_sort-fieldname = 'CARRID' .
ls_sort-up = 'X' . "A to Z
ls_sort-down = space .
APPEND ls_sort TO pt_sort .
ls_sort-spos = '2' .
ls_sort-fieldname = 'SEATSOCC' .
ls_sort-up = space .
ls_sort-down = 'X' . "Z to A
APPEND ls_sort TO pt_sort .
ENDFORM. " prepare_sort_table
<b>Preparing the table for sorting settings</b>
We have two important points to tell about this topic. First one is that, be ready for a short dump if any one of the fields given to be sorted is not in the content of the field catalog. Secondly, when you make ALV Grid to sort data, by default it vertically merges fields having the same content. To avoid from this for all of the columns, you can set no_merging field of the layout structure to X. If you want to disable merging for just some columns, set no_merging field of the field catalog row corresponding to that column.
You can get and set sort criteria applied whenever you want by using methods get_sort_criteria and set_sort_criteria, respectively.
<b>
Sort Using FACTORY CLASSES</b>
<b>Sorts CL_SALV_SORTS</b>
we can add some sorting to the ALV grid. Create the object reference variable and receive the object using the GET_SORTS method of the GR_TABLE object. Next, add the sort by calling the ADD_SORT method of the GR_SORTS object.
report zalvom_demo1.
data: ispfli type table of spfli.
data: gr_table type ref to cl_salv_table.
data: gr_functions type ref to cl_salv_functions.
data: gr_display type ref to cl_salv_display_settings. data: gr_columns type ref to cl_salv_columns_table.
data: gr_column type ref to cl_salv_column_table.
data: gr_sorts type ref to cl_salv_sorts.
data: color type lvc_s_colo.
start-of-selection.
select * into table ispfli from spfli. cl_salv_table=>factory( importing r_salv_table = gr_table changing t_table = ispfli ).
gr_functions = gr_table->get_functions( ). gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ). gr_display->set_striped_pattern( cl_salv_display_settings=>true ). gr_display->set_list_header( 'This is the heading' ). gr_columns = gr_table->get_columns( ).
gr_column ?= gr_columns->get_column( 'CITYTO' ). gr_column->set_long_text( 'This is long text' ). gr_column->set_medium_text( 'This is med text' ). gr_column->set_short_text( 'This is sh' ).
gr_column ?= gr_columns->get_column( 'CITYFROM' ). color-col = '6'.
color-int = '1'.
color-inv = '0'.
gr_column->set_color( color ).
gr_sorts = gr_table->get_sorts( ).
gr_sorts->add_sort 'CITYTO' ).
gr_table->display( ).
Regards
Ravish
<b><i>
Reward if useful to you</i></b>
Message was edited by:
Ravish Garg -
How to get latest record on top of the result list
Hi Gurus,
How to get latest record on top of the result list when you open the record.
saved data method in BT120H_CPL of OverView page and result list in ICCMP_INBOX.
Regards,
RaviHi
Try sort descending by on fileld "changed at ".
manipulate the sort depends on your requirement
Regards
Logu -
How to get multiple records using fn-bea:execute-sql()
Hi,
I created Proxy service(ALSB3.0) to get records from DB table. I have used Xquery function(fn-bea:execute-sql()). Using simple SQL query I got single record, but my table having multiple records. Please suggest how to get multiple records using fn-bea:execute-sql() and how to assign them in ALSB variable.
Regards,
Nagaraju
Edited by: user10373980 on Sep 29, 2008 6:11 AMHi,
Am facing the same issue stated above that I couldnt get all the records in the table that am querying in the Proxyservice.
For example:
fn-bea:execute-sql('EsbDataSource', 'student', 'select Name from StudentList' ) is the query that am using to fetch the records from the table called StudentList which contains more than one records like
Id Name
01 XXX
02 YYY
03 ZZZ
I tried to assign the result of the above query in a variable and while trying to log the variable, I can see the below
<student>
<Name>XXX</Name>
</student>
I want to have all the records from my table in xml format but it's not coming up. I get the value only from the first row of my table.
Please suggest.
regards,
Venkat -
How to get check box in alv output
hi gurus
can anyone explian me how to get check box in alv output
it should not be a pop up window
i want to get in output itself
tahnk you
regards
kals.Hi
by using rs_selfield
ty to call dynamic subroutine..
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
read table rs-selfield with key cond = 'X'
endform.
see the below example
REPORT Z_GET_REFRESH no standard page heading.
type-pools : slis.
tables : makt,
mara.
data : i_fieldcat type slis_t_fieldcat_alv.
CONSTANTS :
gc_refresh TYPE syucomm VALUE '&REFRESH'.
data : begin of i_makt occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of i_makt.
data : v_repid like sy-repid,
g_user_command type slis_formname value 'USER_COMMAND',
g_status_set type slis_formname value 'SET_PF_STATUS',
lt_event_exit TYPE slis_t_event_exit,
ls_event_exit TYPE slis_event_exit.
DATA:LC_GLAY TYPE LVC_S_GLAY.
select-options s_matnr for mara-matnr .
start-of-selection.
select matnr maktx from makt into table i_makt
where matnr in s_matnr.
end-of-selection.
Fill the fieldcatlog
perform fill_field.
Call the FM
perform call_fm.
*& Form fill_field
text
--> p1 text
<-- p2 text
FORM fill_field.
data wa_fieldcat type slis_fieldcat_alv.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-outputlen = '18'.
wa_fieldcat-seltext_l = 'Material #'.
wa_fieldcat-col_pos = '1'.
append wa_fieldcat to i_fieldcat.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MAKTX'.
wa_fieldcat-outputlen = '40'.
wa_fieldcat-seltext_l = 'Material Desc'.
wa_fieldcat-col_pos = '2'.
append wa_fieldcat to i_fieldcat.
ENDFORM. " fill_field
*& Form call_fm
text
--> p1 text
<-- p2 text
FORM call_fm.
v_repid = sy-repid.
LC_GLAY-EDT_CLL_CB = 'X'.
CLEAR ls_event_exit.
ls_event_exit-ucomm = gc_refresh. " Refresh
ls_event_exit-after = 'X'.
APPEND ls_event_exit TO lt_event_exit.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = g_status_set
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS = LC_GLAY
IS_LAYOUT =
IT_FIELDCAT = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT = lt_event_exit
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_makt
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_fm
FORM USER_COMMAND *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
data i_RSPARAMS like RSPARAMS occurs 0.
CASE R_UCOMM.
WHEN '&IC1'.
read table i_makt index rs_selfield-tabindex.
SET PARAMETER ID 'MAT' FIELD i_makt-matnr.
if not i_makt-matnr is initial.
call transaction 'MM02' and skip first screen.
endif.
when '&REFRESH'.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
CURR_REPORT = v_repid
IMPORTING
SP =
TABLES
SELECTION_TABLE = i_RSPARAMS
EXCEPTIONS
NOT_FOUND = 1
NO_REPORT = 2
OTHERS = 3
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
submit z_get_refresh with selection-table i_RSPARAMS.
rs_selfield-refresh = 'X'.
ENDCASE.
MOVE '&REFRESH' TO r_ucomm.
ENDFORM.
FORM set_pf_status *
FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
DELETE Rt_extab WHERE fcode = gc_refresh.
SET PF-STATUS 'STANDARD_FULLSCREEN' OF PROGRAM 'SAPLKKBL'
EXCLUDING Rt_extab.
*SET PF-STATUS 'STANDARD' EXCLUDING rt_extab.
SET TITLEBAR sy-tcode.
ENDFORM. -
How to get check box in alv grid list output
hi gurus,
can anyone inform me
how to get check box in alv output it should not be a pop up window
thank you
regards
kals.or
hi go through the fallowing code.
code*&----
*& Report YGS_ALV_BOM *
REPORT YGS_ALV_BOM .
TABLES : MAST,STKO,STPO.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF TY_MAST,
CHECK_BOX,
MATNR TYPE MAST-MATNR,
WERKS TYPE MAST-WERKS,
STLAN TYPE MAST-STLAN,
STLNR TYPE MAST-STLNR,
STLAL TYPE MAST-STLAL,
END OF TY_MAST.
TYPES : BEGIN OF TY_STKO,
STLTY TYPE STKO-STLTY,
STLNR TYPE STKO-STLNR,
STLAL TYPE STKO-STLAL,
STKOZ TYPE STKO-STKOZ,
BMENG TYPE STKO-BMENG,
BMEIN TYPE STKO-BMEIN,
END OF TY_STKO.
TYPES : BEGIN OF TY_STPO,
LIGHTS,
STLTY TYPE STPO-STLTY,
STLNR TYPE STPO-STLNR,
STLKN TYPE STPO-STLKN,
STPOZ TYPE STPO-STPOZ,
IDNRK TYPE STPO-IDNRK,
MENGE TYPE STPO-MENGE,
MEINS TYPE STPO-MEINS,
END OF TY_STPO.
DATA : IT_MAST TYPE TABLE OF TY_MAST,
WA_MAST TYPE TY_MAST,
IT_STKO TYPE TABLE OF TY_STKO,
WA_STKO TYPE TY_STKO,
IT_STPO TYPE TABLE OF TY_STPO,
WA_STPO TYPE TY_STPO.
DATA : lt_fieldcat TYPE slis_t_fieldcat_alv,
ls_layout TYPE slis_layout_alv,
ls_event TYPE slis_alv_event,
lt_event TYPE slis_t_event,
it_sortinfo type slis_t_sortinfo_alv,
ls_header TYPE slis_listheader,
lt_header TYPE slis_t_listHEADER.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS : S_MATNR FOR MAST-MATNR.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILD_FIELDCAT USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT.
END-OF-SELECTION.
PERFORM DISPLAY_DATA.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form GET_DATA .
REFRESH : IT_MAST.
SELECT MATNR
WERKS
STLAN
STLNR
FROM MAST
INTO CORRESPONDING FIELDS OF TABLE IT_MAST
WHERE MATNR IN S_MATNR.
endform. " GET_DATA
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'MATNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'MATNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'WERKS'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'WERKS'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
form BUILD_LAYOUT .
CLEAR LS_LAYOUT.
LS_LAYOUT-BOX_FIELDNAME = 'CHECK_BOX'.
LS_LAYOUT-BOX_TABNAME = 'IT_MAST'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
form DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_MAST
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'YSTATUS' OF PROGRAM SY-REPID
EXCLUDING RT_EXTAB.
ENDFORM.
FORM USER_COMMAND USING RF_UCOMM TYPE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM.
WHEN '&NEXT'.
PERFORM GET_DATA_BOM .
PERFORM BUILD_FIELDCAT_BOM USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT_BOM.
PERFORM DISPLAY_DATA_BOM.
ENDCASE.
ENDFORM.
*& Form GET_DATA_BOM
text
--> p1 text
<-- p2 text
form GET_DATA_BOM .
CLEAR : WA_STPO,
WA_MAST.
REFRESH : IT_STPO.
DATA : IT_CHECK TYPE TABLE OF TY_MAST.
LOOP AT IT_MAST INTO WA_MAST.
IF WA_MAST-CHECK_BOX EQ 'X'.
APPEND WA_MAST TO IT_CHECK.
ENDIF.
ENDLOOP.
SELECT STLTY
STLNR
STLKN
VGKNT
IDNRK
MENGE
MEINS
FROM STPO
INTO CORRESPONDING FIELDS OF TABLE IT_STPO
FOR ALL ENTRIES IN IT_CHECK
WHERE IDNRK EQ IT_CHECK-MATNR.
CLEAR WA_STPO.
LOOP AT IT_STPO INTO WA_STPO.
SELECT SINGLE * FROM MAST WHERE MATNR EQ WA_STPO-IDNRK.
IF SY-SUBRC = 0.
WA_STPO-LIGHTS = '2'.
ELSE.
WA_STPO-LIGHTS = '1'.
ENDIF.
MODIFY IT_STPO FROM WA_STPO.
ENDLOOP.
endform. " GET_DATA_BOM
*& Form BUILD_FIELDCAT_BOM
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT_BOM USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'STLTY'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLTY'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLKN'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLKN'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 4.
L_FIELDCAT-FIELDNAME = 'IDNRK'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'IDNRK'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 5.
L_FIELDCAT-FIELDNAME = 'MENGE'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'MENGE'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT_BOM
*& Form BUILD_LAYOUT_BOM
text
--> p1 text
*<-- p2 text
form BUILD_LAYOUT_BOM .
CLEAR : LS_LAYOUT.
LS_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
LS_LAYOUT-LIGHTS_TABNAME = 'IT_STPO'.
endform. " BUILD_LAYOUT_BOM
*& Form DISPLAY_DATA_BOM
text
--> p1 text
<-- p2 text
form DISPLAY_DATA_BOM .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND_BOM'
I_CALLBACK_TOP_OF_PAGE = 'TOP9'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_STPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA_BOM
FORM TOP9 .
CLEAR LS_HEADER.
REFRESH LT_HEADER.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'BILL OF MATERIALS'.
APPEND LS_HEADER TO LT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LT_HEADER
I_LOGO = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
ENDFORM.
FORM USER_COMMAND_BOM USING RF_UCOMM_BOM LIKE SY-UCOMM
SEL_FIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM_BOM.
WHEN '&IC1'.
SET PARAMETER ID 'MAT' FIELD WA_STPO-IDNRK.
SET PARAMETER ID 'WRK' FIELD WA_MAST-WERKS.
SET PARAMETER ID 'CSA' FIELD WA_MAST-STLAN.
CALL TRANSACTION 'CS03' AND SKIP FIRST SCREEN.
ENDCASE.[/code] -
HI All,
I have an query, i have data like how to get filtered data
i have data like below
we have started this report with below data for Oct 2014 to Dec 2014
QUARTER
STATE
COUNT
Oct 2014 - Dec 2014
U.P
70
Oct 2014 - Dec 2014
M.P
0
Oct 2014 - Dec 2014
BIHAR
3
Oct 2014 - Dec 2014
MAHA
50
Oct 2014 - Dec 2014
RAJ
3
so it was very easy to generate report
then we get data for Jan 2014 to March 2014
QUARTER
STATE
COUNT
Oct 2014 - Dec 2014
U.P
70
Oct 2014 - Dec 2014
M.P
0
Oct 2014 - Dec 2014
BIHAR
3
Oct 2014 - Dec 2014
MAHA
50
Oct 2014 - Dec 2014
RAJ
3
Jan 2014 - Mar 2014
U.P
77
Jan 2014 - Mar 2014
M.P
1
Jan 2014 - Mar 2014
BIHAR
4
Jan 2014 - Mar 2014
MAHA
77
Jan 2014 - Mar 2014
RAJ
5
so we applied filter on quarter manually for generating the report
now we have data like below
QUARTER
STATE
COUNT
Oct 2014 - Dec 2014
U.P
70
Oct 2014 - Dec 2014
M.P
0
Oct 2014 - Dec 2014
BIHAR
3
Oct 2014 - Dec 2014
MAHA
50
Oct 2014 - Dec 2014
RAJ
3
Jan 2014 - Mar 2014
U.P
77
Jan 2014 - Mar 2014
M.P
1
Jan 2014 - Mar 2014
BIHAR
4
Jan 2014 - Mar 2014
MAHA
77
Jan 2014 - Mar 2014
RAJ
5
Apr 2014 - Jun 2014
U.P
186
Apr 2014 - Jun 2014
M.P
18
Apr 2014 - Jun 2014
BIHAR
74
Apr 2014 - Jun 2014
MAHA
189
Apr 2014 - Jun 2014
RAJ
68
now as per new requirement they want only this quarter data of Apr 2014 to Jun 2014
Apr 2014 - Jun 2014
U.P
186
Apr 2014 - Jun 2014
M.P
18
Apr 2014 - Jun 2014
BIHAR
74
Apr 2014 - Jun 2014
MAHA
189
Apr 2014 - Jun 2014
RAJ
68
and requirement like we have to automate this process . means report should contain only current quarter value.
so my query is how to achieve this
please suggest
I am using SAP BO 3.1
Thanks in advance
JeetHi Jeet,
You can try this-
Create variable
V_Quarter= if Left(<QUARTER>,3)="Jan" then 1 elseif Left(<QUARTER>,3)="Apr" then 2 elseif Left(<QUARTER>,3)="Jul" then 3 else 4
V_Year= Right(<QUARTER>)
V_CurrQuarter=Quarter(CurrentDate())
V_CurrYear=Year (CurrentDate())
Apply filter on report
V_Quarter= V_CurrQuarter and V_Year=V_CurrYear
-Anuj -
How to get the records which has a specified x/y coordinates
Hi,
How to get the records which has a specified x/y coordinates. I have a table which has street data. And another table has a point data. Now I just want to get the records from street data which includes the points in the point data table. Can any one give your suggestions
Thanks and Regards
AravindanAravinda,
If you want to find the line segments which intersect the given
set of points, you can do that with SDO_RELATE.
siva -
How to get the record selected in ztable based record in the output of alv
Hi All,
I have developed a report, it is displaying the output in ALV format.The list contained some 20 fields along with MATERIAL and BATCH. I have provided menu bar as extras -> ztable(it also contained MATERIAL and BATCH). But I have some issue when I select any record in the output then go to
path extras -> ztable, it has to select the record in ztable based MATERIAL and BATCH which i have selected in the output, then can you please provide solution for the above problem.
Thanks in advanceHi Dolly,
you can do this by,
data: index_rows type lvc_t_row,
index like line of index_rows.
* Get Selected rows from alv grid
clear index_rows. refresh index_rows.
"When you choose extras->ztable
call method alv_grid->get_selected_rows
importing
et_index_rows = index_rows.
* Now delete those rows from the ALV grid
loop at index_rows into index.
read table itab index index-index. "Lets say itab is the table you are displaying
if sy-subrc = 0.
perform bdc_sm30. "do simple bdc for sm30 with tab name and selected values
endif.
endloop.
Regards,
Manoj Kumar P
Edited by: Manoj Kumar on Feb 23, 2009 2:49 PM -
HOW TO GET "N" RECORDS, URGENT
Hi,
Can any one please tell me what will be the SQL statement to get 10 records for each department . I dont want top 10 , i just want to get 10 records for each department from the employee table. or lets say 10 orders for each day for last 30 days from the order table. This is very URGENT. Please help.
Thanks in AdvanceHi,
Thanks for your reply . But you didnt get my question I guess. I said I dont want the top "N" records. I want a query to pull N records for each department . Here is a sample, which shows 3 records for each department. Though there can be many records in the table for each department, the select staement pulls only three records for each department. I want that select statement.
Thanks
Feroz
deptno------------empno----------ename
10 -------------------100------------feroz
10--------------------110------------anwar
10--------------------120-------------liakat
20-------------------200--------------zahir
20------------------210---------------inzam
20------------------220---------------shakil
30------------------300---------------rameh
30------------------310--------------rajesh
30-------------------320-------------ritesh -
How to get the SUBTOTAL_TEXT in ALV
Hi
we have a requirement, it needs to get the SUBTOTAL_TEXT in ALV.
Can i know how to do it in ALV.
Can you give me any Example.
And How to Use TOP-OF-PAGE in ALV. What is the Purpose of TOP-OF-PAGE.
Regards,
N.L.Hi,
I am giving you sample code look at this regarding TOP-OF-PAGE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = i_repid
i_callback_user_command = 'USER_COMMAND_PERNR'
it_fieldcat = header
is_layout = gt_layout
i_callback_top_of_page = 'TOP-OF-PAGE1'
i_grid_title = 'Communication device details - Deleted records'
it_sort = gt_sort[]
i_default = 'X'
i_save = 'U'
is_variant = gt_variant
it_events = gt_events
TABLES
t_outtab = ITAB.
clear itab.
Form TOP-OF-PAGE1
form top-of-page1.
data: header type slis_t_listheader,
wa type slis_listheader. "infield like wa-info, nline type n.
TITLE AREA
wa-typ = 'S'.
wa-info = 'Communication device details'.
append wa to header.
wa-typ = 'S'.
write sy-datum to wa-info MM/DD/YYYY.
concatenate 'Date: ' wa-info into wa-info separated by space.
append wa to header.
wa-typ = 'S'.
concatenate 'User Name: ' sy-UNAME into wa-info separated by space.
append wa to header.
wa-typ = 'S'.
concatenate 'Prog Name: ' sy-repid into wa-info separated by space.
append wa to header.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = header
i_logo = 'ENJOYSAP_LOGO1'.
endform.
In this top of page you will get Report name date etc and your company logo or SAP enjoy logo what ever you want.
You check this link also for reference.
http://www.sapdevelopment.co.uk/reporting/alvhome.htm
Thanks.
If this helps you award points and close the thread. -
How to get changed data in ALV in Web Dynpro for ABAP
METHOD on_data_check .
DATA:
node_spfli TYPE REF TO if_wd_context_node,
node_sflight TYPE REF TO if_wd_context_node,
itab_sflight2 TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
IMPORTING
table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AMHi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
lr_table_settings->set_data_check(
IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
lr_table_settings->set_data_check( IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values. -
Urgent:How to get the Sqltext for Oracle Sumbitted Jobs in 10g
Dear All,
Could you help me out in sorting the below problem.
I use to get the current running sql's with following below query in 9i.
SELECT A.SID,B.HASH_VALUE, OSUSER, USERNAME, SQL_TEXT
FROM V$SESSION A, V$SQLTEXT B
WHERE B.HASH_VALUE = A.SQL_HASH_VALUE
AND USERNAME LIKE upper('%SCHEMA%')
ORDER BY B.HASH_VALUE, B.PIECE;
This is will work in 10g also for user-triggered sqls,stored procedures etc.
But when oracle submits job i'm not able find which qurery is running.
Seems For oracle jobs in 10g for V$session contain column SQL_HASH_VALUE as Zero and hence i'm not able find the any sql's running.
Could you please any of you help me out how to get the Sqltext for Orcle submited Jobs in 10g.
Please revert asap as this is very urgent for me.
Thanks in Advance
Anil.Have you tried to query WF_ITEMS? -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=WF_ITEMS&c_owner=APPLSYS&c_type=TABLE
bde_wf_item.sql - Runtime Data of a Single Workflow Item [ID 187071.1]
Thanks,
Hussein
Maybe you are looking for
-
How to integrate and index SAP R/3 Office documents into resp. through KM
Hi, Is there a way to integrate an existing store of SAPOffice documents on R/3, stored by default in the SAP R/3 table SOFFCONT1 (KPro repository SOFFDB), into the KM on the portal, so that these documents can be indexed and searched through TREX fr
-
JTable with JButton Cell renderer
How can I get buttons (JButtons) to "depress" properly in a JTable when using them as the cell renderer for a specific column in a JTable? Currently when pressing any button in the column, there is no change in the visible state of the button, i.e. i
-
Hi Igor and everyone. The following line causes a compiler error with my VS2012. Can somebody explain to me why please.: template< template<typename, typename> class BP, typename T1, typename A, typename... Args > struct are_all< BP, T1, A, Args... >
-
Loading flash 8 SWF in adobe AIR, loses the stage width in flash 8 SWF
Currently i am using a CS3 IDE to compile AIR application.I am trying to load the flash 8 SWF inside my AIR application.After loading the SWF, when i try to trace the stage width inside the flash 8 SWF , it says undefined.Not sure why.. Googling few
-
Forgot administrator name and password
I cannot remember the administrator name and password that I set up when first using macbook pro. How can I find these?