USB3 won't work when setting a UEFI password

Hi,
When setting a UEFI password on a Surface Pro 3, the USB3 port will stop working. When deleting the password, it works again.
A message shows that "Windows couldn't launch the peripheral driver because of error 43 (driver Intel(R) USB3 extensible - 100)"
Can anyone help me?
Thank you in advance!

First thing to check when the phone is not ringing is the mute switch. See this graphic.
If that is alright, the next thing to check is to see if Do Not Disturb is turned on. Is there a small crescent moon icon next to the battery icon? If so, then go to the Control Panel by swiping upwards from the bottom of the screen. Do Not Disturb is the next to the last icon on the top row, the one that has that crescent moon.

Similar Messages

  • My nano works when connected to a computer but won't work when unconnected.  The battery is full.

    My nano won't work when it is not connected to a computer.  It won't even reset.  If I pull it into my computer it will work and it shows that the battery is full.  What might be the problem?

    Then that sounds to be the Apple ID that owns this Mac, the OS and any preinstalled apps. Did that Apple ID set the Mac up when new?

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

  • After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

  • My 8 key won't work when I press it to put in my password, what can I do?

    my 8 key won't work when I press it to put in my password, what can I do?

    Presumably you are connecting it from the *Dock Connector.* In this case, the controls on the car stereo should be controlling the iPod and the iPod's controls are disabled.
    If you are using the car's connection interface, consult the car manual to find out how to control the iPod. If you are using an adaptor between the iPod and car, ask the adaptors installer or manufacturer.
    Phil

  • Since I updated to Yosemite my mouse won't work when I turn on, unless I unplug it and put it in again

    I have a mini mac updated to Yosemite, since I updated,  my mac mouse won't work when I open ...So I have to unplug from my mac keyboard and plug back in again . Does anyone have the same problem?

    Thanks Eric...a few other things have happened too...still working on them, I like the change just updating and figuring out why I might have some other problems...thånks again

  • Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

    Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

    assuming it is an optical mouse (no ball etc.) then there aren't any moving parts involve in the motion detection
    so there's a faulty component or connection
    from what you describe it could be just a loose/broken connection, so if you know someone familiar with electronics see if they can open it up and have a look

  • Movies won't work when a DVD is inserted ?

    Movies won't work when a DVD is inserted.  What do I do to watch a movie ?

    Just one DVD or all of them?
    Some DVD's just need a gentile cloth and rubbing alcohol wipe on the bottom to rid of fingerprints etc.
    If your using out of region code DVD's (each area of the world has regions codes assigned to the computer and disks) then that needs to be changed.
    This can happen if you buy a Mac used from another part of the world or use DVD's from another region.

  • Old name and password won't work when networking to new Win7PC.

    I have a name/password problem when trying to network a new Win 7 PC via a new Netgear 2200 Router to a MacMini.
    It networked 100% OK with the old XP System and old Netgear Router, but now when I click on the PC icon that shows up in Workgroup the old password doesn't work and there is a different popup menu that won't allow the old name and password.
    Interestingly the Mac Mini still networks with the XP laptop using the old pupup box with name and password.
    Netgear say it's not their problem - even though they list 'mac compatible' on their box.
    The PC manufacturer (Acer) say Mac issues are outside of their free technical support.
    Apple support said the Macmini was 'out of warranty'.
    So I'm stuck using a USB stick or email to transfer files from one to the other!
    Please help, I need that network connectivity back asap.

    Option 1
    If you've enabled root logins, log in as root and promote the other user to an admin.
    Option 2
    Recover your entire system from the last Time Machine snapshot taken before the damage was done, if you know when that was. Afterwards you can restore any data that has changed since then from a later snapshot. If you’re an advanced user familiar with the shell, there may be a quicker fix, but I prefer not to get into that.
    Option 3
    Back up all data, then boot in single-user mode (command-S at startup.) When the text stops scrolling, follow the prompts to make the boot volume writable. Then enter the following command very carefully:
    rm -i /var/db/.AppleSetupDone
    You should get the following line of output below what you entered:
    remove /var/db/.AppleSetupDone?
    If you do, then enter
    y
    and press return. Then type
    reboot
    Press return again. The system will boot into the Setup Assistant, as if you were setting it up for the first time. Skip the prompt to transfer information. Create a user with the same name as the old admin user. Log in and test. You may need to recreate your other user accounts, if any. Their files won't be deleted.
    Option 4
    If you're not comfortable with any of the above options, get someone more experienced to help you. One way to do that is to make a "Genius" appointment at an Apple Store. It's a free service.

  • Pause / Resume button combination not working when set to display for "rest of project"

    Good day,
    I have created a set of four objects on slide2 of my project
    1. Smart Object rounded rectangle with text "(playing) - CLICK to Pause" [this is the graphic the user sees]
    2. Smart Object rounded rectangle with text "(paused) - CLICK to Resume" [this is the graphic the user sees]
    3. Smart Object rectangle, transparent, used as button, set to not display in project - btn_Resume
    4. Smart Object rectangle, transparent, used as button - btn_Pause
    A. Script assigned to btn_Pause hides btn_Pause and the "CLICK to Pause" graphic, shows the btn_Resume and "CLICK to Resume" graphic, and pauses the project by setting the system pause variable to 1
    B. Script assigned to btn_Resume hides btn_Resume and the "CLICK to Resume" graphic, shows the btn_Pause and "CLICK to Pause" graphic, and resumes the project by setting the system resume variable to 1
    C. All items are set to display from the beginning of slide2 for the "rest of project"
    On slide 2, the buttons hide/show and pause/resume behaviors work correctly.
    On slide 3, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors (show/hide/pause) occur until a good amount of time into the slide: you can click all you want for 20-30 seconds, but nothing works except the click sound. Eventually, the behavior will work.
    On slides 4 and following, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors EVER work.
    If the behaviors NEVER, EVER worked, I would keep looking for what I did not have set correctly, but the correct working on the slide where they are set, delayed behavior on the next, and no behavior on the remainder of slides following has me stumped.
    Captivate version 6.0.1.240
    Windows 7 OS
    I hope I'm missing something obvious here, and I'm more than willing to face-palm if you tell me . Otherwise, I have not been able to find any setting that makes any difference. I would REALLY rather not duplicate the buttons and scripts on every page of the project. Given the blog posts I have seen saying this method should work just fine, I'm hoping there is a side quirk somewhere that I'm missing.
    Thanks for any help you can give.

    Without clouding with too much explanation, this technique arose out of a need to deal with (in a different project) objects that were grouped, and wanting to deal with the groups in as simple a way as possible, allow for easy swapping of group assets, and having a few buttons do multiple things. The idea of being able to have multiple interactive buttons stacked on top of each other while appearing for the rest of the project led to trying this simple construct before trying something more complex.
    You are correct, that there is a simpler solution, which we ended up using because we were not able to get two interactive buttons stacked on top of each other while displayed for the rest of the project to work properly (although that is SUPPOSED to work, as far as I understand).
    Here's what we ended up doing:
    A) Two smartshapes used as messaging graphics
    B) A single (one) interactive smartshape used as a button
    C) A conditional action to pause/resume and show/hide the appropriate messaging graphics
    D) All three objects (A&B) stacked, B on top.
    E) All objects set to always appear on top, and to display for rest of project.
    Our hypothesis, then, is that you are not able to stack interactive objects on top of each other and then display for the rest of the project.
    If anyone has evidence to the contrary, we would, gladly, take a look.
    Thanks for your interest Lilybiri, and for your input.
    Best regards,
    Hank

  • IPod won't work when iTrip is connect to car charger

    When I connect my itrip to the car cigarette lighter the iPod won't work, i.e. it will plsay the current tune but the controls don't respond and it stops playing when the current tune ends. It works ok when I disconnect the power.
    Ipod model M9244B version 2.3
    Any ideas?

    Try the following to rule out a software problem:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem that indicates a hadware problem, likely a bad battery. Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Hyperlinks won't work when copied from h to v layout

    hi there, just created a dps folio with lots of hyperlinks (InDesign CS6 everything updated to the latest version).
    First in the h version I put a rectangle above the piece of content I wish to be clickable, choose 'hyperlinks' and put the link in it then inside the folio overlays I make sure 'open in folio' is selected. Second I copied the rectangle to the v version of the layout, resize it so it's covering the right content. Inside the hyperlinks panel I'll find the links, sometimes when the rectangle is selected the link shows up darkened, but most of the time when I select the copied rectangle nothing changes inside the hyperlinks-links panel. In that case I selected the rectangle and clicked again on the hyperlink so I think it's 'bind' again.
    Testing the folio on the iPad everything works fine in the horizontal version, but when i try the vertical pages not 1 link is working.
    When re-ensure the hyperlinks are present in the v version, I noticed that clicking on the rectangles some of them do not highlight any hyperlink but others do and none of both work on the iPad. Strange is also when I click a rectangle who does not highlight any hyperlink and I then select (apply??) the hyperlink inside the hyperlinks panel to 'bind' both together the document would not let me save the document as if there's nothing changed on it..
    Is this a bug or what am I doing wrong?
    any hints and tips welcome ;-)
    I've just deleted the hyperlinks overlays and tried with buttons overlay and 'go to url'. That seems to works on both direction.

    Thanks for the prompt reply.
    I do not manage the group policy and I'll have it checked. One question though, if it is the policy then would it not affect Excel 2003 as well. When I use Excel 2003, I see buttons in toolbar, using which I convert excel file to pdf and first thing it does is scans for various things ( Hyperlinks is one of them ).
    When I tried with excel 2007,  I can convert excel file to PDF by selecting print option and selecting Adobe there. It converts the file but the hyper links won't work.
    One thing I noticed that using the pdf conversion buttons in toolbar in excel will convert hyperlinks too.
    My problem here is that I do not see Adobe Acrobat converstion buttons in Excel 2007.

  • 5th G iPod won't work when hooked up

    My new iPod will charge on my laptop - it shows up on the desktop as well as in iTunes - but it won't work while it's charging from the computer.
    I know the battery isn't completely down. Is there some setting I need to change so I can charge AND watch videos at the same time?
    Thanks

    Click the eject symbol (underlined arrow) next to the iPod in the iTunes source list. The iPod should return to its main menu, but the battery meter should have a lightning bolt in it.
    Tom

  • My voice control in imessage is not working when set in Spanish.  Only writes English.

    HI,
    Voice control not working on Imessage when set to Spanish.  Only takes dictation in English.  I speak in Spanish and writes whatever in English.  Have reset iphone several times as well as I message but does not fix it.  Does any one know how I can solve this problem?

    Voice Control in Messages means you are using Siri, which is where that feature comes from on the keyboard.  What languages does it show in Settings > General > Siri > Language?

  • Mail for Exchange does not work when set to manual...

    I set up mail for exchange and it works beautifully when set to always on, however many times I want it on manual so I can only check at specific times when I'm away from a pc, but it doesn't seem to work.
    When I click synchronise, it appears as if it syncs and disconnects, but it doesn't update anything. If I try the same when I'm looking at the mail for exchange settings, then it tries to connect and says error connecting, try again later.
    So i switched to always on, it worked, back to manual, and it seems that the first attempt was successful, but I know it'll stop working later.
    Any idea what the problem is with manual checking?

    I set up mail for exchange and it works beautifully when set to always on, however many times I want it on manual so I can only check at specific times when I'm away from a pc, but it doesn't seem to work.
    When I click synchronise, it appears as if it syncs and disconnects, but it doesn't update anything. If I try the same when I'm looking at the mail for exchange settings, then it tries to connect and says error connecting, try again later.
    So i switched to always on, it worked, back to manual, and it seems that the first attempt was successful, but I know it'll stop working later.
    Any idea what the problem is with manual checking?

Maybe you are looking for