Use of another database in savingsAccount
Hello
Please help
I am trying to run an application frrom the tutorial savingsAccount
but I have mysql database
Please tell me all the steps I must do (what properties set, about env variables e.t.c)
.
A couple of other uses:
1) You can use flashback to test your DR. So you can activate your standby. Test application/network connectivity and functionality on your DR site and when done revert this database back to a physical standby. You do however have to ensure that this is allowed in your environment. In some places I have worked this would be a big no no as there were zero data loss requirements. However some companies will allow this as long as the standby is back in place within a certain time period.
2) In the case that you have to do a failover for whatever reason, but then what was the primary site becomes available, you can flashback what was your primary to make it the standby rather than re-instatiating the database from scratch.
Eg. You have a power outage at your primary site so you perform a failover and your standby becomes the primary. Once what was your primary site is back online, you can convert your previous primary into a standby by doing a full back/restore (or whatever method you choose) to recreate your standby again. However you also have the option of using flashback on this database and then convert it into a standby as this would potentially be quicker than re-instantiating the standby.
Similar Messages
-
How can i get data from another database SQL Server use database link from
I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?
hi,
u should see following documentation:
Oracle9i Heterogeneous Connectivity Administrator's Guide
Release 1 (9.0.1)
Part Number A88789_01
in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
regards
umar -
How to import a table from another database using DB toolset.
Hello All
I would like to import a table from one database to another using DB toolbox.
I do not want to import all data to LV and then save them to another database. Instead I would prefer to use SQL syntax.
Does anobody know how to write SQL command to import whole table from one database to another?
I have found in some SQL manual that INSERT INTO should work, but JET4 returns an error that table (e.g. c:\mydatabase\table1) can not be found.
Thanks in advance
Pawelif i don't have TEST table on server B whether COPY command will create this table on server B with the same structure ? If you specify CREATE as a clause the table will be created:
SQL> help copy
COPY
COPY copies data from a query to a table in a local or remote
database. COPY supports CHAR, DATE, LONG, NUMBER and VARCHAR2.
COPY {FROM database | TO database | FROM database TO database}
APPENDCREATE|INSERT|REPLACE} destination_table
[(column, column, column, ...)] USING query
where database has the following syntax:
username[password]@connect_identifier -
Using another database table in a query
Hi,<BR><BR>Iam designing a report in which i have to use a table from another database<BR><BR>my query is <BR><BR>select ev_class_id,ev_id,desc,start_time from tev where start_time > today<BR><BR> and (desc like \'%f\' or desc like \'%m\' or desc like \'%yds\')<BR><BR> and ev_id not in(selct ev_id from ppbrio:race_length)<BR><BR> and ev_class_id = 23<BR><BR> union<BR><BR> select ev_class_id,ev_id,desc,start_time from tev where start_time > today<BR><BR> and ev_id not in (select ev_id from ppbrio:race_length)<BR><BR> and ev_class_id in (3,129,131,132)<BR><BR>"open bet" is a databse am using to design query and have to use a table from ppbrio(pp_race_length)<BR><BR>can some body tell me how to do this.<BR><BR>rajani<BR><BR><BR>
Put it in the post-query trigger. Post-change is there only for backward compatibility.
-
Stored procedure scope: using sp from another database
Good day,
I hava a stored procedure named sp_emps (simple select from an employees table) in a database named Employees.
I would like use this procedure in a another database named New_Employees.
Is this possible, without creating / copying the sp to the other database ?
Also I did not want to make the sp a system object
Please assistHi Zimiso,
The problem here is that no matter from where you execute your procedure, its context will always be the "Employees" database.
What you ask for is possible, but only by using Dynamic SQL.
You can have a @Database parameter on your procedure, and then concatenate the value in this parameter to wherever needed in your dynamic queries.
For example:
CREATE PROCEDURE sp_emps
@Database NVARCHAR(200)
AS
DECLARE @Command NVARCHAR(MAX);
SET @Command = 'SELECT * FROM ' + QUOTENAME(@Database) + '.dbo.MyEmployees'EXECUTE(@Command)
More information about dynamic SQL:
http://www.mssqltips.com/sqlservertip/1160/execute-dynamic-sql-commands-in-sql-server/
This isn't an ideal solution because there are lots of possible risks and problems that come along with dynamic SQL (for example, SQL Injection).
The better solution, in my opinion, would be to create the stored procedure as a system object (create it in the "master" database). This will make its context change based on the database from whence it was executed.
Eitan Blumin; SQL Server Consultant - Madeira Data Solutions; -
how to transfer database table contain null values, primary key, and foreign key to the another database in same server. using INSERT method. thanks
INSERT targetdb.dbo.tbl (col1, col2, col3, ...)
SELECT col1, col2, col3, ...
FROM sourcedb.dbo.tbl
Or what is your question really about? Since you talke about foreign keys etc, I suspect that you want to transfer the entire table definition, but you cannot do that with an INSERT statement.
Erland Sommarskog, SQL Server MVP, [email protected] -
Use OWB packages to deploy on another database
Hello,
Is it possible to use OWB to create the ETL packages and then copy the package to another database (where OWB has not been setup) and execute the package there, or must I setup OWB on the new database?
thanksYou may also benefit from this :
http://www.oracle.com/technology/products/warehouse/htdocs/OWBExchange.html?cat=ALP&submit=search
Headless Deployment of Generated Code 10gR2 May 2009
Generate OWB code to allow for deployment to and execution on database hosts where OWB is not installed.
and also described here:
http://blogs.oracle.com/warehousebuilder/2009/05/headless_operation_owb_code_generation_going_it_alone.html
You will at least need a repository in the target, but do not need to install anything in the filesystem and no control center service there.
Regards,
Erik -
How to use an Object Type from Another Database
Hi,
I have this requirement that I need to call a stored procedure from another DB (db1) but I am having a problem with this because one of the input parameters uses an object type defined in that DB (db1). Is it possible to use an object type from another database? TIA!Sven W. wrote:
At least for queries, but I think also for procedure arguments..You (both) probably missed my post?
We can't use a remote type as procedure argument, even with the same OID.
It's OK for query on a remote object column though :
SQL> conn remote_user@remote_db
Entrez le mot de passe :
Connecté.
SQL> create type mytype oid '19A57209ECB73F91E03400400B40BBE3'
2 as object (att1 number);
3 /
Type créé.
SQL> create table mytable (col1 mytype);
Table créée.
SQL> insert into mytable values (mytype(777));
1 ligne créée.
SQL> create or replace function myfunc (p_in in mytype) return number
2 is
3 begin
4 return p_in.att1;
5 end;
6 /
Fonction créée.
SQL> disconn
Déconnecté de Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
SQL>
SQL>
SQL>
SQL>
SQL> conn my_user@local_db
Entrez le mot de passe :
Connecté.
SQL> create type mytype oid '19A57209ECB73F91E03400400B40BBE3'
2 as object (att1 number);
3 /
Type créé.
SQL> select * from mytable@test_dbl;
COL1(ATT1)
MYTYPE(777)
SQL> declare
2 res number;
3 begin
4 res := myfunc@test_dbl(mytype@test_dbl(777));
5 end;
6 /
res := myfunc@test_dbl(mytype@test_dbl(777));
ERREUR à la ligne 4 :
ORA-06550: Ligne 4, colonne 26 :
PLS-00331: référence non valide à REMOTE_USER.MYTYPE@TEST_DBL.WORLD
ORA-06550: Ligne 4, colonne 2 :
PL/SQL: Statement ignored
SQL> declare
2 res number;
3 begin
4 res := myfunc@test_dbl(mytype(777));
5 end;
6 /
res := myfunc@test_dbl(mytype(777));
ERREUR à la ligne 4 :
ORA-06550: Ligne 4, colonne 9 :
PLS-00306: numéro ou types d'arguments erronés dans appel à 'MYFUNC'
ORA-06550: Ligne 4, colonne 2 :
PL/SQL: Statement ignored -
Im wondering if i can use another database for the workflow engine. I mean it comes with a database managment by default i want to know if a can use another one (SQL server)
Hi,
We have been using jtds driver , which is free and the fastest and without any bugs until now, we have been using it for 4 months now.
The part below explain how to set up your mssql server with jtds driver.
create a db lets call is bpel
then run these queries on it. basically to create the tables, these files are
domain_sqlserver.ddl
server_sqlserver.ddl
workflow_sqlserver.sql
sensor_sqlserver.sql
located at
/OraBPELPM_1/integration/orabpel/system/database/scripts
After that download the jtds driver for sql server.
We do not use the microsofts jdbc driver for mssql, although we have tried it.
It doesnt work properly, with the bpel process manager, basically it has some problem with select image and blob types from DB.
Anyways, the best one we found was for jtds, it works great and is the fastest I beleive.
We used data direct's jdbc driver but its not free and after doing some benchmark tests we found jtds was the fastest.
mkdir -p jdbc/jTDS/unzip
cd jdbc/jTDS/unzip
download the jtds-1.2-dist.zip from
wget http://surfnet.dl.sourceforge.net/sourceforge/jtds/jtds-1.2-dist.zip
unzip jtds-1.2-dist.zip
cd unzip
cp jtds-1.2.jar OraHome_1/integration/orabpel/system/appserver/oc4j/j2ee/home/applib/
You will now have to configure MsSQL in your data-sources.xml file.
Microsoft SQL Server Database Configuration
Oracle Bpel now needs to be configured to use Microsoft SQL Server, using the JDBC drivers.
cd OraHome_1/integration/orabpel/system/appserver/oc4j/j2ee/home/config/
vi data-sources.xml
You must then place the following xml within the file:
<data-source class="net.sourceforge.jtds.jdbcx.JtdsDataSource"
name="BPELServerDataSource"
location="jdbc/BPELServerDataSourceWorkflow"
xa-location="BPELServerDataSource"
ejb-location="jdbc/BPELServerDataSource"
connection-driver="net.sourceforge.jtds.jdbc.Driver"
username="BPEL_user"
password="bpeluser!">
<property name="serverName" value="server_name"/>
<property name="databaseName" value="database_name"/>
<property name="portNumber" value="1433"/>
</data-source>
<data-source class="net.sourceforge.jtds.jdbcx.JtdsDataSource"
name="AdminConsoleDateSource"
location="jdbc/AdminConsoleDateSource"
xa-location="AdminConsoleDateSource"
ejb-location="jdbc/AdminConsoleDateSource"
connection-driver="net.sourceforge.jtds.jdbc.Driver"
username="user_name"
password="password">
<property name="serverName" value="server_name"/>
<property name="databaseName" value="database_name"/>
<property name="portNumber" value="1433"/>
</data-source>
<data-source class="net.sourceforge.jtds.jdbcx.JtdsDataSource"
name="BPELSamplesDataSource"
location="jdbc/BPELSamplesDataSource"
xa-location="BPELSamplesDataSource"
ejb-location="jdbc/BPELSamplesDataSource"
connection-driver="net.sourceforge.jtds.jdbc.Driver"
username="user_name"
password="password">
<property name="serverName" value="server_name"/>
<property name="databaseName" value="database_name"/>
<property name="portNumber" value="1433"/>
</data-source>
Run the BPEL server and everything should work fine. -
How to copy file from one table to another table at another database
I need to transfer my tables from one workspace and schema to another workspace and schema. Basically I need to create again all the tables at this new schema. How could I transfer data from tha table at old schema to the table at new schema when this table has files stored in it? (data type is blob)
thank you so much,
SilverHello Silver,
Depending which database you're using (if it's available) I would recommend to use datapump.
Datapump allows you to copy an entire schema to another database, it's the "new" export/import you might now.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/
REWARDS: Please remember to mark helpful or correct posts on the forum -
MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
EdI have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Help on export sybase iq tables with data and import in another database ?
Help on export Sybase iq 16 tables with data and import into another database ?
Hi Nilesh,
If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
Extract/ Load table
Insert location method : require IQ servers to be entered in interfaces file
Backup/Restore : copy entire database content
If you have not the DDLs, you can generate them using IQ cockpit or SCC.
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
Regards,
Tayeb. -
How to update date in a table from another database
Hello,
I am trying to code a way to Update my Testing database from another database. In the coding below the database that has the updated data ends in Restore.
Use ClientDB_MASTER_Restore
Truncate Table ClientDB_MASTER_Testing.dbo.Activity_Tracking_AZ
GO
SELECT * INTO ClientDB_Master_Testing.dbo.Activity_Tracking_AZ
FROM Activity_Tracking_AZ
Go
I know with this Technique the table must be truncated if not deleted first. There is probably a better way to do this which I'm very open to. I'm also looking for coding that will roll back any changes made should an error occur.
As always, any help is greatly appreciated.
David92595USE ClientDB_MASTER_Testing
go
SET XACT_ABORT ON
BEGIN TRANSACTION
Truncate Table dbo.Activity_Tracking_AZ
-- SET IDENTITY_INSERT dbo.Activity_Tracking_AZ ON
INSERT dbo.Activity_Tracking_AZ (col1, col2, ...)
SELECT col1, col2,
FROM ClientDB_MASTER_Restore.dbo.Activity_Tracking_AZ
-- SET IDENTITY_INSERT dbo.Activity_Tracking_AZ OFF
COMMIT TRANSACTION
If you find it boring to type the column lists, just find the table in Object Explorer, and drag the columns node to where you want the column list.
You need the SET IDENTITY_INSERT command if the table has an IDENTITY column.
By wrapping the code in a transaction, you are not left with an empty table if the INSERT fails. The command SET XACT_ABORT ON makes sure that the batch is aborted and rolled back in case of an error.
Erland Sommarskog, SQL Server MVP, [email protected] -
When I try to open iPhoto I get a window dialog that says...
Your photo library is either in use by another application or has become unreadable
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have tried the reopen it while keeping the Option and Command keyes pressed.
No change.
I dee nothing but a blank page,
Any help would be appreciated.
Also hace back ups of all images on cd's. dvds and jump drives.
Any advice is appreciated.Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
How to use Forms Default Database Connection in java class
When a form based application is started, a connection is made with underlying database. This is the Default (Primay) Database Connection.
The problem is I have some of my business logic implemented in a java class. In this class I have to make a another connection with the same database. What I want to do is to use the original Database Connection in the java class. In this I may avoid the overhead of reconnection.
Could anyone pls guide me in this way...you can't share the forms connection. Sorry :(
Maybe you are looking for
-
Both me and my wife have ipad minis and iphone 5. I want to use one itunes account for both of us. Is that possible.
-
goods issue is happening through MB1A, but it is not happening through MIGO. Theissue is like this: It says "document XXXXXXXXX does not contain any selectable items"
-
Sort order for group by functions
I have table TAB1(notenum number, linenum number, linetext varchar2(100)). Each note can have multiple lines of text. Eg data NOTENUM LINENUM LINETEXT 1 1 THIS IS LINE1. 1 2 THIS IS LINE2. 2 1 THIS IS LINE1 OF NOTE2. 2
-
Getting exception in cache server while inserting around 80,000 values
Hi I am trying to insert 80,000 values in the cache in distributed mode(2 nodes) from .NET client then getting below error in .net client side. TcpConnection(Id=0x00000132F5B02F87AC190D2F6F41225F9F53C4584B06C624C3DCB23A6B005B41, Open=True, Member(Loc
-
HT204387 Why can't my ipad2 and iPhone4 and 5 recognise each other as devices using bluetooth?
Why can't my ipad2 and iPhone4 and 5 recognise each other as devices using bluetooth? Bluetooth should allow me to connect to other devices to transfer data like photo's, music, files, whatever between my apple devices and non apple devices. Other ph