Use of category filters in client side GWI

Hi
With help from the forums, I am now experimenting with client side GWI but I cannot find any documentation that describes the use of the category filter field in the Sync properties tab of the options.
I have already reviewed the documentation at : [http://help.sap.com/saphelp_crm50/helpdata/en/74/49af3ab73dc363e10000000a114084/frameset.htm]
I am using MSA 5.0 SP11 and MS Outlook 2007
Can anyone help?
Alternatively, can anyone point me in the direction of any more advanced config guides?
Thanks
James
Edited by: James Preston on Feb 8, 2009 6:48 PM

Thanks Rashmi
My investigation leads me to believe that there is a bit more too it than that if I want to use this filter effectively.
If I do not put a filter that is in both my Outlook Master Categroy list AND maintained in SPRO, it deletes the activity in the MSA Calendar. If I do not use the filter field at all it works just fine, but we need to restrict the activities flowing in the direction Mail >> Mobile
I will keep experimenting and update this post with my findings.
FYI - I have also found an issue with the conflict resolution which I will be raising an OSS for.
Scenario: On the conflict resolution tab, in the Ask for confirmation when area, ALL of the boxes are UNCHECKED.
In the Conflict handling section, SAP CRM has priority is selected.
I would expect, therefore, if I were to delete an appointment in Outlook, it should NOT delete it automatically from MSA...but it does!
This is just for info, but if you know anything about this, let me know and I can raise another forum thread so that the correct points can be awarded
Regards
James

Similar Messages

  • Can't scan a collection using endpoint, "Failed to initiate client side operation."

    i'm trying to do a quick endpoint scan of a collection and get the error, "failed to initiate client side operation."   I click the details button and I get this:
    Not found
    Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
    The SMS Provider reported an error.
    Stack Trace:
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String methodClass, String methodName, Dictionary`2 methodParameters, Boolean traceParameters)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String methodClass, String methodName, Dictionary`2 methodParameters)
       at Microsoft.ConfigurationManagement.AdminConsole.ClientOperation.Utilities.ExecuteClientOperation(ConnectionManagerBase connectionManager, ClientActionType operationType, String collectionId, String collectionName, List`1 validMachineIds, IResultObject
    selectedMachines)
    System.Management.ManagementException
    Not found
    Stack Trace:
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String methodClass, String methodName, Dictionary`2 methodParameters, Boolean traceParameters)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String methodClass, String methodName, Dictionary`2 methodParameters)
       at Microsoft.ConfigurationManagement.AdminConsole.ClientOperation.Utilities.ExecuteClientOperation(ConnectionManagerBase connectionManager, ClientActionType operationType, String collectionId, String collectionName, List`1 validMachineIds, IResultObject
    selectedMachines)
    I have absolutely no idea how to fix it.  I've tried resetting the site, uninstalling and reinstalling the SCCM console from the SP1 media, verifying that WMI is set up correctly, reinstalling the SCCM client on my server, restarting the server... I've
    got nothing.   Does anyone have any suggestions?

    What version is the client running? Do you also have Cu1 installed, if so, did you also upgrade the clients?
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • NoClassdefFound Problem using EJB as web service client

    Hello there, I am trying to use a MDB as a web service client. The architecture,
    briefly is in the form of a java program communicating with a MDB via JMS, the
    MDB gets the data from some external server via SOAP. I am using JBuilder to generate
    the client side classes choosing the Axis framework. When my MDB is trying to
    bind using locator.getPort() it throws an error as follows:
    java.lang.NoClassDefFoundError: org.apache.axis.client.AxisClient. java.lang.NoClassDefFoundError:
    org.apache.axis.client.AxisClient at org.apache.axis.client.Service.getAxisClient()Lorg.apache.axis.client
    AxisClient;(Service.java:143) at org.apache.axis.client.Service.<init>()V(Service.java:152)
    Note that it works fine if I use the web services client as a standalone java
    program(no weblogic ). I tried putting the Axis.jar file as well as the relevant
    files from this jar file(JBuilder's feature) in the EJB module that is deployed,
    of no avail. Following is the classloader printed from the EJB's onMessage method
    if needed for better understanding
    weblogic.utils.classloaders.GenericClassLoader@afdd3a finder: weblogic.utils.cla
    ssloaders.MultiClassFinder@20d7479 annotation: SecurityEJBModule@
    Any help will be appreciated

    Slava, I did exactly that and it worked! I wish I had seen your reply before.
    Thanks
    "Slava Imeshev" <[email protected]> wrote:
    >
    "Santosh" <[email protected]> wrote in message news:405074c7$[email protected]..
    Hello there, I am trying to use a MDB as a web service client. Thearchitecture,
    briefly is in the form of a java program communicating with a MDB viaJMS, the
    MDB gets the data from some external server via SOAP. I am using JBuilderto generate
    the client side classes choosing the Axis framework. When my MDB istrying to
    bind using locator.getPort() it throws an error as follows:
    java.lang.NoClassDefFoundError: org.apache.axis.client.AxisClient.java.lang.NoClassDefFoundError:
    org.apache.axis.client.AxisClient at org.apache.axis.client.Service.getAxisClient()Lorg.apache.axis.client
    AxisClient;(Service.java:143) at org.apache.axis.client.Service.<init>()V(Service.java:152)
    Note that it works fine if I use the web services client as a standalonejava
    program(no weblogic ). I tried putting the Axis.jar file as well asthe relevant
    files from this jar file(JBuilder's feature) in the EJB module thatis deployed,
    of no avail. Following is the classloader printed from the EJB's onMessagemethod
    if needed for better understandingYou need to package all Axis jars and dependancoes into the EAR and
    refer tham
    in your ejb-jar MANIFEST.MF. If you are running weblogic 8.1, you may
    just put them
    into APP-INF/lib. Than you won't need to modify manifest.
    Hope this helps.
    Regards,
    Slava Imeshev

  • Validating data in client side

    Hi,
    I'm developing a web application using Struts framework.
    and my questions is, does the validate method int the ActionForm replaces the using javascript validation?
    If I can do all the validations in this validate method, so does that mean that i'm not going to use JS at all?

    Client side validation is usually a subset of the validation done on the server side (ie, server side duplicates the client side validation, and then some).
    I usually only do some basic client side validation such as:
    a textfield is null, but shouldn't be
    a textfield should be in this format but isn't: mm/dd/yyyy
    a textfield should be a number but contains a letter.
    If these conditions occur, dont submit the form, pop up a warning dialog box instead.

  • Problem in creating client side PDF with image using flex and AlivePD

    I need a favor I am creating client side PDF with image using flex and AlivePDF for a web based application. Images have been generated on that pdf but it is creating problem for large size images as half of the image disappeared from that pdf.I am taking the image inside a canvas . How do i control my images so that they come fit on that pdf file for any image size that i take.
    Thanks in advance
    Atishay

    I am having a similar and more serious problem. It takes a
    long time to execute, but even attaching a small image balloons the
    pdf to 6MB plus. After a few images it gets up to 20MB. These are
    100k jpeg files being attached. The resulting PDF is too large to
    email or process effectively. Does anyone know how to reduce
    size/processing?

  • How to use KeyChain API from client-side HTML scripting in Safari on iPad?

    I have a requirement where I need to add client-side scripting in an HTML page to be supported by Safari on iPad that creates a private / public key pair and that creates a CSR (Certificate Signing Request) in PKCS#10 or SPKAC format that can be sent to a certification authority server using form HTTP/POST that will then return the generated certificate.
    I initially thought that I could simply use the HTML 5 tag <keygen> which can do exactly what I need, but unfortunately this tag is not at all supported on mobile Apple devices like iPad or iPhone, so I have to look for another solution.
    I have noticed that the KeyChain tool should be available on iPad using the documented API, but I have no idea based on the documentation whether the API can be called from client-side HTML scripting on iPad.
    Question : is it technically possible using the functionalities and API's exposed on an iPad to implement what I just described in HTML client-side scripting? If so, do you have some links with useful information that can help me on my way?

    I have a requirement where I need to add client-side scripting in an HTML page to be supported by Safari on iPad that creates a private / public key pair and that creates a CSR (Certificate Signing Request) in PKCS#10 or SPKAC format that can be sent to a certification authority server using form HTTP/POST that will then return the generated certificate.
    I initially thought that I could simply use the HTML 5 tag <keygen> which can do exactly what I need, but unfortunately this tag is not at all supported on mobile Apple devices like iPad or iPhone, so I have to look for another solution.
    I have noticed that the KeyChain tool should be available on iPad using the documented API, but I have no idea based on the documentation whether the API can be called from client-side HTML scripting on iPad.
    Question : is it technically possible using the functionalities and API's exposed on an iPad to implement what I just described in HTML client-side scripting? If so, do you have some links with useful information that can help me on my way?

  • How to copy a page( webpart page) with its content using client side.

    How to copy a page(in my case  webpart page) with its content(it may contain webparts) using client code (i mean using SPservices or ECMA script).
    What i am planning is ,to give end user a page where it will contain text box to specify  name of page and a button with the help of  content editor webpart.
    where on click of button we need to write client side code such that it should create a new page from a existing page in a library with given name by user.
    Any suggestion would be helpful. For your information we can do it through UI with the help Site Actions / Manage Content and Structure.But i want to automate it using client side code.Server side code is restricted.
    or can we create a template of an existing page with content without the help of sharepoint designer.
    Thanks in advance
    with regards Ravichandra

    This is good example
    http://balajiindia.wordpress.com/2011/05/27/using-jquery-with-custom-web-services-in-sharepoint/
    Create web service
    http://balajiindia.wordpress.com/2011/05/27/using-jquery-with-custom-web-services-in-sharepoint/. Create method "Create Page" http://www.learningsharepoint.com/2010/09/17/create-publishing-pages-sharepoint-2010-programmatically/
    Build your Java Script. You can use Content Editor Web Part if you want to avoid custom web part development http://www.codeproject.com/Articles/544538/JQuery-with-SharePoint
    Oleg

  • How to create a Document Set in SharePoint 2013 using JavaScript Client Side Object Model (JSOM)?

    Hi,
    The requirement is to create ""Document Sets in Bulk" using JSOM. I am using the following posts:-
    http://blogs.msdn.com/b/mittals/archive/2013/04/03/how-to-create-a-document-set-in-sharepoint-2013-using-javascript-client-side-object-model-jsom.aspx
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/1904cddb-850c-4425-8205-998bfaad07d7/create-document-set-using-ecma-script
    But, when I am executing the code, I am getting error "Cannot read property 'DocumentSet' of undefined "..Please find
    below my code. I am using Content editor web part and attached my JS file with that :-
    <div>
    <label>Enter the DocumentSet Name <input type="text" id="txtGetDocumentSetName" name="DocumentSetname"/> </label> </br>
    <input type="button" id="btncreate" name="bcreateDocumentSet" value="Create Document Set" onclick="javascript:CreateDocumentSet()"/>
    </div>
    <script type="text/javascript" src="//ajax.aspnetcdn.com/ajax/jQuery/jquery-1.7.2.min.js"> </script>
    <script type="text/javascript">
       SP.SOD.executeFunc('sp.js','SP.ClientContext','SP.DocumentSet','SP.DocumentManagement.js',CreateDocumentSet);
    // This function is called on click of the “Create Document Set” button. 
    var ctx;
    var parentFolder;
    var newDocSetName;
    var docsetContentType;
    function CreateDocumentSet() {
        alert("In ClientContext");
        var ctx = SP.ClientContext.get_current(); 
        newDocSetName = $('#txtGetDocumentSetName').val(); 
        var docSetContentTypeID = "0x0120D520";
        alert("docSetContentTypeID:=" + docSetContentTypeID);
        var web = ctx.get_web(); 
        var list = web.get_lists().getByTitle('Current Documents'); 
        ctx.load(list);
        alert("List Loaded !!");
        parentFolder = list.get_rootFolder(); 
        ctx.load(parentFolder);
        docsetContentType = web.get_contentTypes().getById(docSetContentTypeID); 
        ctx.load(docsetContentType);
        alert("docsetContentType Loaded !!");
        ctx.executeQueryAsync(onRequestSuccess, onRequestFail);
    function onRequestSuccess() {       
        alert("In Success");
        SP.DocumentSet.DocumentSet.create(ctx, parentFolder, newDocSetName, docsetContentType.get_id());
        alert('Document Set creation successful');
    // This function runs if the executeQueryAsync call fails.
    function onRequestFail(sender, args) {
        alert("Document Set creation failed" + + args.get_message());
    Please help !!
    Vipul Jain

    Hello,
    I have already tried your solution, however in that case I get the error - "UncaughtSys.ArgumentNullException: Sys.ArgumentNullException:
    Value cannot be null.Parameter name: context"...
    Also, I tried removing SP.SOD.executeFunc
    from my code, but no success :(
    Kindly suggest !!!
    Vipul Jain

  • Using scan name in tns file not working at client side...

    Hi All,
    I have installed 2 node RAC -11gR2 on ORACLE VM Server 2.2.1.
    now, I want to give tnsentry to dev team to use this RACDB.
    I am using scan name in tnsnames.ora file. Also I have make scan name entry in /etc/hosts not in the DNS.
    I have below entry in RACDB server...
    RACDB =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = RWCORA-cluster-scan)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = racdb)
    == now in dev user side, If I give the same above tns entry and make entry of this scan name and two VIPs in /etc/hosts file of dev user then SQL*Plus is successfully connected but not JDBC like SQL*Developer.
    I have make below entry in dev user's /etc/hosts file:
    10.40.0.51     RWCORARAC1-vip
    10.40.0.52 RWCORARAC2-vip
    10.40.0.50     RWCORA-cluster-scan
    Is this correct way or suggest me perfect link through which I canconnect all OCI, JDBC connection from client side.
    Thanks...

    you can use JDBC thin URL in SQL developer.
    Choose NEW/DATABASE CONNECTION, then put the connection type "Advanced" and then place the jdbc url as :
    jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=RWCORA-cluster-scan)(PORT=1521))(LOAD_BALANCE=yes)(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=racdb)(FAILOVER_MODE=(TYPE=SELECT)(METHOD=BASIC)(RETRIES=180)(DELAY=5))))

  • STRUTS: client-side validation in jsp using  DynaValidatorForm

    I am supposed to work on struts on as project and it is like learning a crash course and work the next day.
    In Struts 1.1 enviroment, I am using DynaValidatorForm to create a bean form and then perform validation.
    1. I write a DynaValidatorForm definition in struts-config.xml
    2. I write xml for action so that when /getQuotes.do in invoked by a jsp form, the form data is put into the QuoteDetailsBean.
    3. add the plugin script for ValidatorPlugIn
    xml fragment from struts-config:
    //form bean
    <form-beans>
    <form-bean name="QuoteDetailsBean" type="org.apache.struts.validator.DynaValidatorForm">
        <form-property name="forename" type="java.lang.String"/>
       <form-property name="surname" type="java.lang.String"/>
    <form-bean>
    </form-beans>
    <action
            path="/getQuotes"
            type="com.kainos.quickquotes.struts.QQGetQuotesAction"
            validate="true"
            name="QuoteDetailsBean"
            input="/userform1.do"
            parameter="save"
            scope="session">
            <forward name="success" path="/pages/jsp/result.jsp"/>
            <forward name="back" path="/userform1.do"/>
    </action>
    <plug-in className="org.apache.struts.validator.ValidatorPlugIn">
         <set-property
             property="pathnames"
             value="/WEB-INF/validator-rules.xml,/WEB-INF/validation.xml"/>
      </plug-in>Now I write a validation code for getQuotes.do. note that I can write the validation code with
    <form name="QuoteDetailsBean"> but this form bean is shared by many jsp, so i am using the name of the action
    (getQuotes) as the name of the form in the validation.xml.
    So far this looks okay, as I am going by some example.
    xml fragment from validation.xml:
    <formset>
              <form name="/getQuotes">
                 <field property="forename" depends="required,minlength">
                    <arg0 key="QuoteDetailsBean.forename" />
                    <arg1 name="minlength" key="${var:minlength}" resource="false"/>
                    <var>
                       <var-name>minlength</var-name>
                       <var-value>2</var-value>
                    </var>
                 </field>
                 <field property="surname" depends="required,minlength">
                <arg0 key="QuoteDetailsBean.surname" />
                <arg1 name="minlength" key="${var:minlength}" resource="false"/>
                <var>
                   <var-name>minlength</var-name>
                   <var-value>2</var-value>
                </var>
                 </field>
    </formset>Now I write the JSP. I use the <html:javascript> tag to allow front-end validation based on the xml in validation.xml.
    The jsp code:
    <%@ taglib uri="/tags/struts-bean" prefix="bean" %>
    <%@ taglib uri="/tags/struts-html" prefix="html" %>
    <%@ taglib uri="/tags/struts-logic" prefix="logic" %>
    <html:html locale="true">
    <head>
    <title><bean:message key="welcome.title"/></title>
    <html:base/>
    <html:javascript formName="/getQuotes"
                method="validateForm"
                dynamicJavascript="true"
                staticJavascript="false"
                cdata="false" />
    </head>
    <body bgcolor="#FFCC9F">
    <html:errors />
    <html:form action="getQuotes.do" onsubmit="return validateForm(this);" >
    Forename:</td> <td>���<html:text property="forename"/></td></tr>
    <tr> <td>Surname:</td> <td>���<html:text property="surname"/></td></tr>
    <html:submit value="Quotes" /></td></tr>
    </html:form>
    </body>
    </html:html>Does this looks okay. I wrote so far based on some tutorials n help online.
    Now when I open the JSP and then do a submit, there is no validation (I tried by submitting with empty forename and surname. I mean i could invoke the action class and the invoke class
    redirects(forwards) to the appropriate path. so the code works fine except validation is not done
    Q1. So what should i do more to get client-side validation?
    What actually happens in client-side validation? does a pop up alert appears?
    nothing happens so far in my case.
    Q2. What should I do more for server side validation. Since the form is incomplete, what happens?
    I thought the same form returns and the error messages are printed in the jsp page since i have the <html:errors />
    tag just below the <body> tag.
    The action class is pretty simple so far:
    public class QQGetQuotesAction extends Action {
        public QQGetQuotesAction(){
    public ActionForward execute(ActionMapping mapping,
                 ActionForm form,
                 HttpServletRequest request,
                 HttpServletResponse response)
        throws Exception {
            DynaValidatorForm dynaform = (DynaValidatorForm)form;
            System.out.println("forename:"+dynaform.get("forename");
            System.out.println("surname:"+dynaform.get("surname");
            return forward=mapping.findForward("back");
    }Please help me out. I think I am missing something which i need to do
    thanks
    Tanveer

    I think the validations are to be declared on the form
    name and not the action path.
    Your formName is QuoteDetailsBean but your are using
    the action path(/getQuotes) both in the validation
    rules and the jsp tags. Use the formName on both the
    places.
    Also your html:javascript tag will not generate the
    static javascript to validate the fields. For this you
    will have to add code like below.
    <html:javascript dynamicJavascript="false"
    staticJavascript="true"/>
    Other options is to set the attribute
    staticJavascript="true" in your html:javascript tag.
    Hope it helps.hi
    staticJavascript="true" did the trick. :)
    I think the validations are to be declared on the form name and not the action path.It is not necessary. You can declare the validation on the action class. This is essential if a form bean is shared by several JSPs having its own action class. This is as per as I read in a tutorial and it works.

  • Client side validation in struts using validation framework

    Hi ,
    am new to struts.....
    I want to validate a simple login page using struts validation framework...
    For that i created,
    login.jsp ( contains html:errors and html:javascript and onsubmit)
    LoginForm extends ValidatorForm
    LoginAction
    resource bundles
    validation.xml ( required, minlength and maxlength rules for both fields)
    struts-config.xml ( configured action mapping and form beans)
    whats my problem is....
    i will get error messages through server side validation...
    i cant able to get the error messages using javascript i.e alert messages.
    i seen the page resource in that all javascript functins are inserted.
    on seeing the javascript error console... it shows
    formName has no properties...............
    exactly at this line
    oRequired = eval('new ' + formName.value + '_required()'); //function validateRequired(form)

    Thanks for your valuable reply.....
    Ya of course what you said was correct....
    I got error messages while submitting the form without any value....
    error messages are displayed using the <html:errors/> tag (server side validation ).
    But it fails to show the alert messages for those errors ( client side validation).
    i inserted the <html:javascript formName="form bean name" /> tag in the bottom of my login jsp.....
    on seeing the error console, it shows formName has no properties.
    Could anybody help me to sort out this problem........

  • Can we access popularity trends using client side script?

    Hi, 
     I have a requirement to show the hit count for my image library's item(s). When ever I am opening an image from the image library, I just wanted to show the hit counts. For this I have created a Number column and updating this column by using CSOM
    when ever hit happens to that particular item. 
    The problem arises here, for visitors ( who has read only permission to the site) I am not able to update the column due to permission issue. Since we all know that we can't elevate the privilege from client side script. And also our design says that we
    can't give the contribute permission to all the users at the library level. How can we update the count at item level even when the visitors are opening an item from the image library? 
    Please help me... 
    Thanks in advance
    Sekar - Our life is short, so help others to grow
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

    972454 wrote:
    can we access 11gr2 oracle using 11g r1 OWB Client? NO .. Oracle 11gR2 db is accessible only from OWB11gR2 client
    we have 11g r1 database installed on our machine, and 11g r2 OWB client on other machine.
    Please help. we are unable to connect.
    Sorry this is different from your 1st question.
    For your information OWB11gR2 client can access 11g r1 database
    Regards
    Gaurav

  • How to read and write Xml file at client side using JavaScript !

    Hello,
    i am new to javascript.
    I have requirement to read and update XML file at client side.
    Will you please guide what could be the best way to read and update XMl file using javascript.
    Thanks,
    Zuned

    This is a Java forum,not a Javascript forum. Maybe you should ask here [http://www.webdeveloper.com/forum/forumdisplay.php?forumid=3&s|http://www.webdeveloper.com/forum/forumdisplay.php?forumid=3&s].

  • Full mask permission in SharePoint using Client Side Object Model

    Full mask permission in SharePoint using Client Side Object Model does not include all the base permission while it does have all base permission in server side . Is this a bug ? 
    Or do we have any workaround for this.
    BasePermissions.Set(PermissionKind.FullMask);  is not updating all the permissions. 
    It seems that there is some limitation with Microsoft.SharePoint.Client.dll as mentioend at below link . Do we have any workaround here.
    http://break962.rssing.com/browser.php?indx=7116806&last=1&item=9
    Ashish Baranwal || To know what you know and what you do not know, that is true knowledge

    You can write your own loop to upload multiple files via an individual call.
    http://sharepoint.stackexchange.com/questions/108525/multiple-file-upload-with-metadata-using-rest/108532#108532
    More reference: http://sharepointfieldnotes.blogspot.com/2014/04/uploading-documents-and-setting.html
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Import TermSet CSV using client side object model

    Hello,
    I want to import CSV in TermStore using client side object model. Unfortunately there is no ImportManager here.
    Is there any other way (Other than reading from CSV and adding term one by one to term store)?
    Regards, Nanddeep Nachan

    Hi,
    Here is a tool(server-side) from codeplex for your reference:
    SharePoint 2010 CSV Bulk Taxonomy TermSet Importer/Exporter
    If you want to import termsets  from CSV in Client-Side, we can refer the tool above.
    You can develop a windows form application and use .Net Client Object Model to achieve it. The following articles is about how to operate the termset using Client Object Model for you reference:
    http://sundarnarasiman.net/?p=87 (Download)
    http://code.msdn.microsoft.com/office/SharePoint-2013-Synchronize-d40638d1/sourcecode?fileId=72317&pathId=166025385
    http://www.c-sharpcorner.com/Blogs/10853/how-to-create-a-term-set-for-the-specified-group-using-clien.aspx
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

Maybe you are looking for