Use of configurator across organizations

Hi,
I have developed configurator some time back and we had just 2 organizations then (Say V1 and M1, V1 being master org and M1 being manufacturing org). Recently a new sales office has come up in Europe (E4 - Netherlands), which only procures the configured items from M1 and sells. With this background, I know it is possible to use the existing configurator as is to configure the products from E4 org and create an IR/ISO process to procure the configured item from M1. But this calls for assigning all the items of M1 which participate in configuration to E4 also to configure the model from E4 (Warehouse on Order line being E4).
Can someone help me with any other setup that would avoid assigning all the items which participate in configuration to E4 as those items do not make any sense to E4 organization
Thanks in advance
Regards

Unfortunately, I don't think you have any choice in the matter. Since your Shipping Organization is E1, all the lines that are returned from Configurator into your Sales Order will be against the E1 org as well (just like the model line). Therefore, you will need to assign all the items from the ATO model to the E1 org --- even though they really are never used there.
In addition, you might want to look at setting up sourcing rules as well. If you are using an ATO models, the AutoCreate Configuration Items program will use the sourcing rules to ensure that the Configured Item BOM is created only in the manufacturing organization M1. The configuration item will be assigned to E1, M1 and V1...but the BOM will only exist in M1. In addition, AutoCreate will utilize Supply Chain Cost Rollup to generate the cost of the configuration in the manufacturing org and "roll out" that cost to the E1 org.
If you are using R12, there is new functionality that will allow the ISO to be generated for the M1 organization immediately as part of the "Create Supply" workflow step. In the past, this was only possible for externally sourced configurations (e.g. purchase requisitions). With R12, it can now generate internal requisitions which will create an Internal Sales Order in the Manufacturing org.
Thanks,
Jason

Similar Messages

  • Using different configured views for different user group in crm2007

    Hello SAP Expert,
    Want to clarify if the BADI (Configuration Access Determination BADI ; BSP_DLC_ACCESS_ENHANCEMENT)  is used as design time or Run time. By looking the help of this BADI it says "This Business Add-In (BAdI) is used in the UI Configuration Tool (CRM-FRW-CON) component." Looks like this is at configuration time not at run time.
    The actual requirement is that for a set of users which work on a particular department, we want to have some extra information on 2 views and rest of the views they would be using same as entire organization. We are inclined towards using config role rather than zviews. If we were to use zviews then it would not be a difficult one.
    We were thinking of a mechanism to show the configured view based on user's Business Role at runtime. e.g. we have 2 roles A and B. Role A user have only 2 views specific to them and all other views they use same as Role B. We do not want to use ZView rather use Role Config Key to distinguish the views. What I was thinking that we should be able to create these 2 views with Config Role A and all  views (including these 2) with Config Role B. On Business Role A and Business Role B both, We will assign Config Role "B". but at runtime system should determine if the Business Role is A and Component is CMP1 then use the view V1 with Config Role A not the default view with config role B. (we can maintain that information in a Z table). This is not based on runtime profile but to use configured view at runtime.
    Any thoughts/ help really appreciated.
    Best regards,

    Hi Amithab,
    you can use badi CRM_BP_UIU_VIEW_CONFIG  of enhancement spot CRM_UIU_BP_ENHANCEMENT for your requirements. Please read the badi documentation because you need also a implementation of badi CRM_BP_UIU_CONFIG_CALLBACK (same spot). SAP considers badi CRM_BP_UIU_VIEW_CONFIG only for use at dynamically loading different configuartions of view details for business partners or contact persons at runtime. But you can use your badi implementation also for other views. You have to redefine method DO_CONFIG_DETERMINATION in your views. And call your badi from there. For this copy&paste the logic of DO_CONFIG_DETERMINATION of bp details to the views you have to load dynamically at runtime.
    We have used this approach for access controll and granting special access to views dependent on different employee functions.
    Best regards
    Michael

  • Change Directory Path using Dynamic Configuration

    Hi,
    We have a requirement where the directory path for placing the files is different across our different environments. Ex: Development Environment has a different path than the Quality Enviornmnet. Also the full path is depending on fileds within the message.
    I want to use Dynamic Configuration to create the Directory path. But in order to capture the full requirement I need to know wheich environment I am within the User Defined Function.
    Can someone provide me the java class and function that I can use in my UDF to read the environment I am in.
    ( Essentially I want to read Sy-SYSID in ABAP...using Java. )
    Regards,
    Arunava

    Hi Arunva,
    >>Essentially I want to read Sy-SYSID in ABAP...using Java.
    It might not be possible to read system id in java, but you can read the sender or receiver service(SENDER_SERVICE or RECEIVER_SERVICE) and based on it can decide the diretory in DynamicConfiguration.
    If you have a sender or receiver SAP sysem then better to read its name because this business systm ill haeunique name aross different environment. Check this thread too
    User-defined function: RFC call
    Regards
    Suraj

  • Change "ALL" Packages in a Project to use Project Configuration Table

    We have numerous SSIS PROJECTS where all of the packages that were developed use local connection managers.  We now want to use a configuration file in SQL Server to contain the connection information.  When I right click on the project, the Option
    that I'm provided is to "Convert to Package Deployment Model".  When I right click on the Control Flow and select Configurations, the "Package Configurations Organizer" dialog opend and the "Enable package configurations"
    check box is not checked.  We have over 300 packages like this and I'm hoping that someone knows of a procedure to have the entries specified in the "Package Configuration Organizer" apply to all packages in the project.
    Please let me know.
    Thank you
    Bigguy

    Is there a painless way to transition the local connection to the project connection without having to manually address each task that becomes invalidated?
    Hi BigGuy,
    I am afraid the answer is no.
    After we convert a connection manger in a package to a project connection manager, the connection manager will be added to each package within the project. If a package already includes a connection manager with the same name as the project connection manager,
    the project connection manager will not be visible until we delete the existing package connection manager that has the same name. After we delete the package connection manager, it’s true that the tasks that uses the package connection manager will become
    invalid with the following error message:
    Error at Package1: The connection "{XXXXX}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
    That’s because a SSIS task refers to a connection manager based on the GUID of the connection manager, however, the GUID become invalid once we delete the package connection manager. To address this issue, we have to manually open each task that throws errors
    to update the task. However, it should not be very painful because we can double click to open the task editor, and then just click “OK” to close the window. In this way, the task will be updated with the project connection manager automatically.
    Regards,
    Mike Yin
    If you have any feedback on our support, please click here
    Mike Yin
    TechNet Community Support

  • All Project Across Organizations List View- Why some projects read only?

    Hello all !
    I sign on as administrator in SSE and on All Project Across Organizations List View :
    Screen: Projects Screen (ePS)
    View: All Project Across Organizations List View
    Business Object: Project
    Applets: Applet[0]: Project List Applet; Applet[1]: Project Entry Applet;
    Business Components: BusComp[0]: Project; BusComp[1]: Project;
    Why some projects are read-only?
    Best regards,
    Lev

    Hi Rebecca,
    This is just a sample project.  I am not the original author of this project.  I just recreated the project, but I have a few problems. 
    1) when I create the project I am not able to retrieve all the rows for that 2nd event unlike the original project.  I cannot figure out why the project crashes when I try to retrieve more than 50-60 rows for the 2nd event.
    problem 2) this project was architected using legacy EF (EF4).  I have to remove all the .tt files in the designer and select "Generate legacy Code" in the edmx file and save.  This is so I can use ObjectContext. 
    Eventually, I want to recreate this sample project using DBContext for the edmx. 
    If you could figure out what the problem is when I replace the service reference in the FullClient, that would be very nice.
    Rich P

  • How to make system update with "use automatic configuration script" and an URL

    Hello,
    all our laptop using "use automatic configuration script" with an "accelerated_pac_base.pac" prxy setting.
    How can we make system update work with that ?
    And no way for us to by pass this proxy settings with
    Thanks

    I mean there is no general method which is capable of correcting all possible errors found by schema validation.
    For example if the validation says it expected to find an <organization> element or a <company> element but it found a <banana> element, there is no way to determine what repair is necessary.
    Anyway the requirement is fighting against the way things work in the real world. The purpose of validation is just to find out whether a document matches a schema. If it doesn't, then too bad. Send it back to be fixed or replaced. If you are having a problem because you repeatedly get documents which don't quite match your schema, then you need to train the users to produce valid documents or to give them tools which help them do that.

  • BOM Resources Sharing across organization

    Frnds
    My Client is in 12.1.3 , Is there any set up in Oracle manufacturing (BOM, WIP, INV) , which can help in sharing Resources (machine. Human) across Organization
    with required accounting too  ??
    e.g
    Inventory organization – INV1 and INV2
    now if any discrete job in INV1 or INV2 needs any resource then it should be issued from common resource organization. Also that resource accounting will be done in that specific balancing segment other than balancing segments specific to inventory or WIP valuation  accounting
    Any help would be a great help
    Regards
    Abhi

    What is the version of apps you are using? Fact: in R12, for average costing organizations, if you refer original order line to RMA the cost of return is same as original order line. also there are some more features that relate to the revenue and COGS recognition.
    That apart we may have these options:
    1. Make branch warehouse organization as standard cost. Use the cost as of the start of the year. Now when you return the goods into this org you always cost at standard. At end of the year, you update your standard cost to be equal to the average cost of new item at the time of the year. Depending on whether your average cost is higher or lower you will have increase or decrease in inventory value (hence other account).
    2.Use cost hooks creatively (have to test this): Cost manager always checks whether cost hooks are used or not (there are two types one for cost and one for accounting). In the accounting one, if it returns -1 means hook is not used (I guess). So have a piece of code in there that inserts record into mtl_transactions_interface of branch organization. The transaction type you use here is average cost update (even if you have no quantity you can do this). Call the online transaction manager right after that to make it completely online and still return -1. I will confirm after testing this.
    3. If 99% of the times the machines are are new, can you make Branch as Subinventory in that A Organization rather than different org?
    4. I see a distant possibility of using order line workflow. Is this branch warehouse only for returns? If that is the case do you refer the original line Id to the RMAs? But the logic remains the same : Using transaction interface for the average cost update.
    5.Your idea is also a great one. Why don't you automate that same thing in the order line workflow. Under certain conditions automatically perform inter org transfer to branch as soon you receive into Org A using transaction interface.
    Thanks
    Nagamohan

  • How do I use multiple librarys to organize my projects

    Is there a way to use multiple libraries to organize my projects. I don't like having all my projects in one library. I'd like separate libraries for Family_Movies, BirthdaysandHolidays, Vacations, etc...
    Thanks.

    You can create multiple folders in your Project Library. I have a folder for each year. Then within the year, if I make several videos on one subject (say a trip to Europe) I will create sub folders within the year.
    There is no limitation on what you name your Folders, so you could name them Family Movies, Vacations, Birthdays, etc.
    When you are in the Project Library View, you can click FILE/NEW FOLDER. For a subfolder, click on the parent folder and then click New Folder.
    Message was edited by: AppleMan1958

  • How to create a variable, and how to use the same across all the reports?

    Hi,
    Is there any possibility of creating a variable at once and making use of that across in all the Crystal Reports?
    Thanks In advance for your time and solution.

    MohanMRK,
    can you describe how you get the value for this variable?
    is it calculated on one report and then you want to pass it to a 2nd report? if that's the case, what you can do is have the reports linked via an opendocument link and pass the value to the 2nd report as a parameter. the value / parameter is only shared when you press the opendocument hyperlink.
    please see the sdk library [here |http://www.sdn.sap.com/irj/boc/sdklibrary]and scroll down to the opendocument section near the bottom.
    if you are just trying to find a way to share a calculation across reports look into creating a Custom Function which can be added to your repository. please note that this will not pass a calculated value across 2 or more reports, but will just have a shared method of making the calculation.
    as Abhilash mentioned before, there's no way to use an actual Variable across 2 separate reports without them being a main report and subreport(s). in that case you'll want to look into Shared Variables.
    cheers,
    jamie

  • How to use a connection across multiple request

    What is the idea of using a connection across multiple requests.

    Please give more details. What connections and what requests
    And are you posting on the right forum? (This sounds more like a Networking/servlet question)

  • How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration

    How can i create a new and tableless database using database configuration
    Just don't install the sample schemas. See the installation guide
    http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
    Using the Database Configuration Assistant
    When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
    Choose a custom install and don't install the sample schemas.
    All other schems/tables installed are REQUIRED by Oracle

  • Transaction code used to configure HTTP Adapter?.

    What transaction code we use to configure HTTP adaptor?.
    SMICM
    Is this correct?.

    Ash,
    Yes. Please see this weblog for some more help:
    /people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
    Just go this url and click the first one for HTTP adapter presentation:
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=http%20adapter&cat=sdn_all#
    Also check this threads:
    in SMICM-->How to Activate HTTP Services
    SMICM services
    ---Satish

  • What are the different types of bind that we can use to configure COREid?

    Hi
    What are the different types of LDAP bind that we can use to configure COREid?
    Thanks for your input.

    (http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/idconfig.htm#BABGAECB)
    7.5.2 Creating an LDAP Directory Server Profile

  • How can I distribute the free version of Numbers, Keynote, and Pages using Apple Configurator

    I am trying to use Apple Configurator to mamnge a set of classroom iPads.  I have figured out how to purchase apps via the VPP account and distribute them, but I can't figure out how to distribute the free versions of Pages, Numbers, and Keynote.  When I try downloading these apps on the Mac running Configurator, they show up as a paid version.  Currently, I have to disable the option in Configurator that removes non-mamanged apps and then install the apps manually on each iPad.  Does anyone have a better option than this.  My hope was to be able to completely manage the iPads by simply pugging them into the Mac.

    The apps is not only for iPhone 5c and 5s. its for all apple products that are purchased with iOS 7. I don't believe if you already have the product then update it to iOS 7 that the apps will be free. I believe that you have to purchase the product on or after the 18th since iOS 7 will already be on the products.
    Edit...All compatible iOS 7 products activated on or after September 1st, 2013 will recieve the iWork apps for free. So yes he/she will recieve the apps

  • How to create Image as Custom Property Type used in Configurable Web Part?

    I wanted to create custom configurable web part property for Image.
    Example - the screenshot of Image property used in Image web part is shown below:
    My goal is to create as many images as possible in custom configurable web part.
    I tried to write the code:
    [WebBrowsable(true),
    WebDisplayName("Example Photo"),
    WebDescription("Example Photo of the user"),
    Category("Custom User Profile"),
    Personalizable(PersonalizationScope.Shared)]
    public Image ExampleUserPhoto { get; set; }
    However, the result does not display Image configurable web part property.
    I wonder why the data type Image does not cause the custom web part to have Image configurable web part property.
    Other data types such as Boolean, Enum, Integer, String and DateTime can be used.
    How can I create Image as Custom Property Type used in Configurable Web Part?

    I have examined that context node __00 has been enhanced,and  has a class name  z___00. But  when I created a new attirubute by right click " Attributes" with wizard under context node __00.There is still  a error message "view is not enhaced or copied with wizard".
    But  when  I created a method  "getvaliation "  in the class of context node zcl__00, the attribute  'valiation' automatically created(at the same time the method "getvaliation' automatically  created for the attribute 'valiation') and I need not to create attibute 'validation' by wizard .  It seemed as if the problem is resloved. But when I make test for it in web ui .There is a runtime erro message.
    Do I need to make some configurations in  the business object layer  for the checkbox? but  the checkbox is only used as a flag  to decide whether a backgoud job is needed to be executed.
    Edited by: samhuman on Jun 22, 2010 10:31 AM

Maybe you are looking for