Use of Execution Type in Workflow process step.

Hi Kiran,
The Execution Type is relevant for the process step of the workflow.
MDM workflow steps can be assigned either to one or more users or to one or more roles, as follows:
u2022 Users. User-based assignments allow you to explicitly specify which user or users should be responsible for performing the step.
u2022 Roles. Role-based assignments allow you to specify roles rather than users, with the actual users determined by MDM at runtime.
The Execution Type defines the relation between these assigned users/ roles if there are more than one:
1. All Concurrent- All assignees must perform the step. Each assignee can do so at the same time.
2. All Sequential Random- All assignees must perform the step. Each assignee can do so one at a time in any order.
3. All Sequential Ordered- All assignees must perform the step. Each assignee can do so one at a time in the order listed in the step.
1. Any Single- Any single assignee can perform the step. The step can be pushed to or pulled by any assignee.
You can also find this documented in the Data Manager Reference Guide under MDM Workflows-> Execution Type (page 292)
Regards,
Hedda Cohen.

_Thanks Hedda_

Similar Messages

How to use a servlet in a Workflow process step.

Hi
I need am upgrading existing code from cq 5.4 to CQ 5.5.
The exsiting code uses a servlet with an injected @MailService reference to send emails. It is currently used as a process step service.
However, with CQ 5.5 I see that I need to implement the WorkFlowProcess interface, to see this class listed as in the Process step drop down list.
The issue I have is if I keep the class as a Servlet extension , it does not show up in the drop down list of the process step.
Is there a way to update the code to list this servlet as a process step?
Or is there a way to inject the MailService reference into a class which only implements the "WorkflowProcess" interface and is not a servlet ?
advice appreciated.
thanks
Ven

The implementation of WorkflowProcess is to be deployed as an OSGi service, so you can @Reference the MailService in that class.
http://dev.day.com/docs/en/cq/current/workflows/wf-extending.html#Defining a Process Step with a Java Class
scott

Own workflow process step (java) not listed in the generic Process step component

Based on the description Extending Workflow Funtionality I have used this sample to create a bundle with the CRXDE Development Environment. Almost just copying the code from the page (had to make some adjustments to correct program errors in this sample) an then build bundle. According to Note 2 this program should be seen in the list supplied by Process step Component when editing a workflow. But it is not there.
@Component
@Service
public class MyWorkflowProcess implements WorkflowProcess {
    @Property(value = "An example workflow process implementation.")
    static final String DESCRIPTION = Constants.SERVICE_DESCRIPTION;
    @Property(value = "Adobe")
    static final String VENDOR = Constants.SERVICE_VENDOR;
    @Property(value = "My Sample Workflow Process")
    static final String LABEL="process.label";
What do I need to do else?
Thanks,
Ulrich

Ulrich,
CRXDE does not support the Java annotations which are listed in the documentations. When you want to leverage CRXDE (which is for development ... discouraged), you need to migrate to JavaDoc style annotations.
For documentation how you can setup a development workflow based on a Java IDE and maven please see [0].
kind regards,
Jörg
[0] http://dev.day.com/docs/en/cq/aem-how-tos/development/how-to-build-aem-projects-using-apac he-maven.html

2 Logical Components for 1 Business Process Step

Hello All,
I'm looking for a way to assign in SolMan --> transaction Solar01 - Tab Structure - Business Process Step, 2 logical components for 1 business step. When creating the business step I have to assign 1 specific logical component to this step. Once I have done this I can only select the chosen logical component ffor SAP Transactions, configuration object etc.. As my business step is running on 2 different systems I need to find a way to link transactions etc. in the step to the different systems. Is there any way to change this for the Level 3 elements, like it is for level 2 (business processes) where I can choose in the different tabs between all the logical components?
Thanks in advance
Ramó

I've seen people use some absolute craziness to get more than three levels. The most extreme being using multiple projects at the highest level (i.e. a project for PTP Accounts Payable). Don't go there.
I personally like to have 1 transaction per process step. Don't use the transaction tab as another process level, use it to better describe the process step (like all the other tabs are uses). It results in a better understanding of the system as you go forward. To do that I make teams break up things they think are one step (this can take some arm twisting, so hit the gym and maybe take a few judo classes).
This allows you to use SolMan in more powerful ways. For instance, if you attach development objects to a step with 5 transactions, you cannot tell which transaction is modified by the development object. However, one transaction per node provides you this link. There are other examples, but basically the "where used" button becomes very useful when you have 1 transaction per node.
Maybe you could provide a specific example of your process and we can think of a better way to collapse it.
Such as:
- PTP Non-Merchandise Purchasing
-- Expense Purchasing
--- Create Purchase Requisition
--- Create Purchase Order (Assign Vendor & Price)
--- Send to Vendor
--- Post Goods Receipt
--- Perform LIV
--- Process Payment
Some companies have 6 level processes already defined in models and putting it into SolMan can be a pain for sure. Your naming convention is usually the best route.
regards,
Jason
The system role and template work around doesn't apply to your situation.

Message Type - STTPOD with Process Code as - OPOD

Dear All,
I am using Standard Message Type - STTPOD with Process Code as - OPOD and Basic Type as - DELVRY03
I am creating a New "Z" Segment Copy of "E1EDL20"
I want to Add in one FIELD
EKPO - ELIKZ which is Delivery Complete INDICATOR
How can i fetch data when the IDOC is generated and to take the value from this FIELD.
Is there any Userexit or BADI
This we are doing so as we can pass message to SNC for GR Done and Completed
Regards
Amey Kulkarni

Hi Amey,
As you are using Standard Message Type - STTPOD with Process Code as - OPOD and Basic Type as - DELVRY03
There is no need create Z-field or any implementation of Userexit or BADI for GR updation in SNC.
In SNC for updating PO GR status you need to maintain below validation settings:
TCode:SPRO>Supply Network Collaboration>Basic Settings>Validation>Own Settings-->Maintain Settings in Validation Profiles
Validation profile=POC1
Validation check=PO_OPENQUAN_FROM_ASNGRQUAN
Check status=Inactive
Validation profile=POC1
Validation check=PO_OPENQUAN_FROM_ASNQUAN Inactive
Check status=Inactive
Validation profile=POC1
Validation check=PO_OPENQUAN_FROM_POGRQUAN
Check status=Active
save the setting.
Regards,
Niikhil

Workflow Process Implementation not found

Hello,
     I've created a workflow process in AEM 5.6. When I initiate the workflow, the workflow is not completed and in the Inbox Console, I see 'process implementation is not found'.
Here is the sample workflow process:
package com.test.workflowtest;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Properties;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.Constants;
import org.apache.felix.scr.annotations.Reference;
import com.day.cq.workflow.WorkflowException;
import com.day.cq.workflow.WorkflowSession;
import com.day.cq.workflow.exec.WorkItem;
import com.day.cq.workflow.exec.WorkflowData;
import com.day.cq.workflow.exec.WorkflowProcess;
import com.day.cq.workflow.metadata.MetaDataMap;
import com.adobe.granite.workflow.WorkflowException;
import com.adobe.granite.workflow.WorkflowSession;
import com.adobe.granite.workflow.exec.WorkflowProcess;
import com.adobe.granite.workflow.exec.WorkItem;
import com.adobe.granite.workflow.metadata.MetaDataMap;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import org.apache.sling.api.resource.ResourceResolverFactory;
import org.apache.sling.api.resource.ResourceResolver;
@Component
@Service
@Properties({
        @Property(name = Constants.SERVICE_DESCRIPTION, value = "Test Process."),
        @Property(name = Constants.SERVICE_VENDOR, value = "TEST"),
        @Property(name = "process.label", value = "Test WF Process")})
public class Test implements WorkflowProcess{
   private static final Logger log = LoggerFactory.getLogger(Test.class);
          @Reference
          private ResourceResolverFactory resourceResolverFactory;
          public void execute(WorkItem item, WorkflowSession session, MetaDataMap args)
        throws WorkflowException {
        log.debug("======== Test Process ===========");
        ResourceResolver resolver = null;
        try{
                              resolver = resourceResolverFactory.getAdministrativeResourceResolver(null);
        }catch(Exception e)
            e.printStackTrace();
=============
Exception:
02.05.2013 11:25:23.305 *ERROR* [JobHandler: /etc/workflow/instances/2013-05-02/model_79635435153979:/content/test1] com.adobe.granite.workflow.core.job.JobHandler Process implementation not found: com.test.workflowtest.Test com.adobe.granite.workflow.WorkflowException: Process implementation not found: com.test.workflowtest.Test
          at com.adobe.granite.workflow.core.job.HandlerBase.executeProcess(HandlerBase.java:221)
          at com.adobe.granite.workflow.core.job.JobHandler.process(JobHandler.java:139)
          at org.apache.sling.event.jobs.JobUtil$1.run(JobUtil.java:272)
          at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
          at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
          at java.lang.Thread.run(Unknown Source)
02.05.2013 11:25:25.333 *ERROR* [JobHandler: /etc/workflow/instances/2013-05-02/model_79635435153979:/content/test1] com.adobe.granite.workflow.core.job.JobHandler Process implementation not found: com.test.workflowtest.Test com.adobe.granite.workflow.WorkflowException: Process implementation not found: com.test.workflowtest.Test
          at com.adobe.granite.workflow.core.job.HandlerBase.executeProcess(HandlerBase.java:221)
          at com.adobe.granite.workflow.core.job.JobHandler.process(JobHandler.java:139)
          at org.apache.sling.event.jobs.JobUtil$1.run(JobUtil.java:272)
          at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
          at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
          at java.lang.Thread.run(Unknown Source)
02.05.2013 11:25:27.361 *ERROR* [JobHandler: /etc/workflow/instances/2013-05-02/model_79635435153979:/content/test1] com.adobe.granite.workflow.core.job.JobHandler Process implementation not found: com.test.workflowtest.Test com.adobe.granite.workflow.WorkflowException: Process implementation not found: com.test.workflowtest.Test
          at com.adobe.granite.workflow.core.job.HandlerBase.executeProcess(HandlerBase.java:221)
          at com.adobe.granite.workflow.core.job.JobHandler.process(JobHandler.java:139)
          at org.apache.sling.event.jobs.JobUtil$1.run(JobUtil.java:272)
          at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
          at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
          at java.lang.Thread.run(Unknown Source)
02.05.2013 11:25:29.389 *ERROR* [JobHandler: /etc/workflow/instances/2013-05-02/model_79635435153979:/content/test1] com.adobe.granite.workflow.core.job.JobHandler Process implementation not found: com.test.workflowtest.Test com.adobe.granite.workflow.WorkflowException: Process implementation not found: com.test.workflowtest.Test
          at com.adobe.granite.workflow.core.job.HandlerBase.executeProcess(HandlerBase.java:221)
          at com.adobe.granite.workflow.core.job.JobHandler.process(JobHandler.java:139)
          at org.apache.sling.event.jobs.JobUtil$1.run(JobUtil.java:272)
          at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
          at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
          at java.lang.Thread.run(Unknown Source)
=======
Findings: Gettting exception only when I use below code in the workflow process.
@Reference
private ResourceResolverFactory resourceResolverFactory;
Any help would be more helpful..
Thanks
Siva

one of the workaround is by adding -XX:-UseSplitVerifier option to the JVM .This issue seems to be an with CQ 5.6 and java 7

Workflow - Block Step - Repeated execution

Hello
I would like to realize a Workflow for each delivery. In the workflow there should be a dialog step for each position.
I can realize that using the block step type.
What if the delivery is changed and new position are added?
Could I use in some way the same block to add the new positions?
Is there a standard solution foreseen by sap?
Thank you!

Hi,
In the workflow log, I am seeing a 'broken block in red color' when one of the approver rejects at a particular level. Workflow is not executing for the rejection path. May I know the reason behind this. I am more worried about the broken red color block. I am seeing the status as 'Error'.
You can observe the difference of the execution of the workflow from the following . Please help me.
1.Approved 2. Rejected

How to get the Asset's current step under a specific workflow process via API?

Everyone,
Is there a way to get the asset's current step for a specific workflow process by the WebCenter Sites API? We are showing out the asset created within the WebCenter Sites in another application via its API. We would like some actions get to be done once determined assets went into a specific step of a workflow process. Any suggestions are welcomed.
Regards!

Here is some information from the FDK Programmer's guide page 115:
IMPORTANT: A valid text range can span multiple paragraphs, subcolumns, or text frames.
It cant span multiple flows, footnotes, table cells, or text lines.
It is possible for a document to have no text selection or insertion point at all. This can occur in
the following circumstances:
● One or more graphic objects in the document are selected
● One or more entire table cells in the document are selected
● There is no selection of any type in the document
So, I did select one or more entire table cells in the document in my first test. It's logical that the result was not like expected.
But selecting one or more entire table cells is a crucial requirement for my plugin, is there anyway to get things straight?
Simply put, I want to enable users to select one or more table cells in the document, and I want to get the object handles of the first cell and the last cell through Framemaker API calls. How?
Many thanks in advance!
Best Regards,
Ellen N. Zhao

Workflow process to assign initiator to following step

I'm very new to CQ... I have a workflow with several steps. I would like to have a process step that uses an ECMA script to assign the following step to the initiator. I thought I could just use the regular workflow-initiator script that is provided but it doesn't seem to work. I think I just need to modify that script to pass the Participant to the next step in the process. Any help on how to do that is greatly appreciated!

Hi,
Maintain the posting keys 40 dr, 50 cr, select rules employee group only in OBYE, OBYG t.code.
then maintain the symbolic account to g/l accounts in OBYE, OBYG.
In OBYE, OBYG we have to maintain the data as per symbolic accounts account assignment feature mean C, F.
If symbolic account feature is C, then we have to maintain the symbolic account and g/l account in OBYE .
If symbolic account feature is F, then we have to maintain the symbolic account and g/l account in OBYG
Regards
Devi.

Using in the workflow process the element of Scenario dimension which conta

Good day All
In the Scenario dimension has been created element which include as children the some store elements of the Scenario dimension (Plan, Fact ...).
This element has been assigned as scenario element for Planning Unit Hierarchy.
When we start the workflow process the children of its elements (Plan, Fact ...) still available for edit on work form for all users.
Question. Work form contains several elements of Scenario. As in the workflow process close all of these elements, creating only one Planning Unit Hierarchy and run the process only once (in fact, one Scenario).
thanks

The total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels.

Using in workflow process the element of Account dimension with subordinate

Good day All
In the dimension Account has been created element, which contains several shared elements. This element has been added as a Parent member when creating a Planning Unit Hierarchy. When we run the workflow process the child shared elements still open for editing for all users.
May be we can’t using shared members in this case?
Thanks

Are you the one who commented out the code you're looking for ?//String desc = StringFactory.getString(attributes.getValue("desc"));You just have to modify you AttributeObject class to hold a new field : String description. And then, it's up to you to create a new constructor or a new setter method.
Btw, this is not a Swing related question.

In Dialog server, what type of work process can I use.

Dear all,
In Dialog server, what type of work process can I use,
Can I use all types like dialog, BTC, U1 and U2 , spool, and enque
regards,
satish

Hi,
you can use dialog, BTC, U1 , U2 and spool
enque must be on only central instance becoz there is no message server on dialog instance
regards,
kaushal

Recommended steps to generate a web service using nested complex types

Hello,
I need to generate a web service that uses nested complex types with built in types on the bottom layer. I hve posted an attempt at a WSDL. Please give advice on if I am doing it correctly.
I have the suspicion that I should nest the complex types into the final complex type VendorStockingInterface. Please confirm.
<?xml version="1.0" encoding="utf-8"?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:conv="http://www.openuri.org/2002/04/soap/conversation/"
xmlns:cw="http://www.openuri.org/2002/04/wsdl/conversation/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
xmlns:jms="http://www.openuri.org/2002/04/wsdl/jms/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns:s0="http://www.openuri.org/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
targetNamespace="http://www.openuri.org/">
<types>
<s:schema targetNamespace="http://www.openuri.org/"
xmlns:s="http://www.w3.org/2001/XMLSchema">
<s:element name="RegisterServiceRequest">
<s:complexType>
<s:sequence>
<s:element name="DeviceCapabilities">
<s:complexType>
<s:sequence>
<s:element name="OSName" type="s:string" nillable="true"/>
     <s:element name="OSVersion" type="s:string" nillable="true"/>
     <s:element name="BRType" type="s:string" nillable="true"/>
     <s:element name="DisplayColors" type="s:string" nillable="true"/>
     <s:element name="DisplayTechnology" type="s:string" nillable="true"/>
     <s:element name="NetworkAccess" type="s:boolean" nillable="true"/>
     <s:element name="DownloadMethod" type="s:string" nillable="true"/>
     <s:element name="DownloadVersion" type="s:string" nillable="true"/>
     <s:element name="Protocols" type="s:string" nillable="true"/>
     </s:sequence>
</s:complexType>
</s:element>
     <s:element name="LicenseType">
<s:complexType>
<s:sequence>
     <s:element name="Licences" type="s:string" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
     <s:element name="PriceValue">
<s:complexType>
<s:sequence>
     <s:element name="Value" type="s:float" nillable="false"/>
     <s:element name="CurrencyType" type="s:string" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
     <s:element name="RevenueModelType">
<s:complexType>
<s:sequence>
     <s:element name="VSRP" type="RegisterServiceRequest:PriceValue" nillable="true"/>
     <s:element name="WholesalePrice" type="RegisterServiceRequest:PriceValue" nillable="true"/>
     <s:element name="VendorSplitPercentage" type="s:float" nillable="true"/>
     <s:element name="VendorPurchasePrice" type="RegisterServiceRequest:PriceValue" nillable="true"/>
     <s:element name="License" type="RegisterServiceRequest:LicenseType" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
     <s:element name="VendorItemIdentifierType">
<s:complexType>
<s:sequence>
     <s:element name="VendorProductDisplay" type="s:string" nillable="false"/>
     <s:element name="VendorProductVersion" type="s:string" nillable="false"/>
     <s:element name="VendorProductCode" type="s:string" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
     <s:element name="VendorBriefType">
<s:complexType>
<s:sequence>
     <s:element name="VendorID" type="s:string" nillable="false"/>
</s:sequence>
</s:complexType>
</s:element>
     <s:element name="VendorItemBriefType">
<s:complexType>
<s:sequence>
     <s:element name="VendorProductID" type="RegisterServiceRequest:VendorItemIdentifierType" nillable="false"/>
     <s:element name="VendorID" type="RegisterServiceRequest:VendorBriefType" nillable="false"/>
     <s:element name="VendorDescription" type="s:string" nillable="true"/>
     <s:element name="VendorPricing" type="RegisterServiceRequest:RevenueModelType" nillable="false"/>
     <s:element name="DownloadURL" type="s:string" nillable="true"/>
     <s:element name="ShortCode" type="s:string" nillable="true"/>
     <s:element name="ApplicationCode" type="s:string" nillable="true"/>
     <s:element name="DRMMethod" type="s:string" nillable="true"/>
</s:sequence>
</s:complexType>
</s:element>
     <s:element name="ContentType">
<s:complexType>
<s:sequence>
     <s:element name="Categorization" type="s:string" nillable="false"/>
     <s:element name="MIMEType" type="s:string" nillable="true"/>
</s:sequence>
</s:complexType>
</s:element>
     <s:element name="VendorStockingInterface">
<s:complexType>
<s:sequence>
     <s:element name="VendorItemInfo" type="RegisterServiceRequest:VendorItemBriefType" nillable="false"/>
     <s:element name="ProductType" type="RegisterServiceRequest:ContentType" nillable="false"/>
     <s:element name="DeviceRequirements" type="RegisterServiceRequest:DeviceCapabilitiesType" nillable="true"/>
     <s:element name="VendorPricing" type="RegisterServiceRequest:RevenueModelType" nillable="false"/>
     <s:element name="ProgramMemory" type="s:int" nillable="true"/>
     <s:element name="DataMemory" type="s:int" nillable="true"/>
     <s:element name="Author" type="s:string" nillable="true"/>
     <s:element name="Language" type="s:string" nillable="true"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="RegisterServiceResponse">
<s:complexType>
<s:sequence>
<s:element name="Message" type="s:string"/>
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</types>
<message name="RegisterServiceSoapIn">
<part name="parameters" element="s0:RegisterServiceRequest"/>
</message>
<message name="RegisterServiceSoapOut">
<part name="parameters" element="s0:RegisterServiceResponse"/>
</message>
<portType name="RegisterServiceSoap">
<operation name="RegisterService">
<input message="s0:RegisterServiceSoapIn"/>
<output message="s0:RegisterServiceSoapOut"/>
</operation>
</portType>
<binding name="RegisterServiceSoap" type="s0:RegisterServiceSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="RegisterService">
<soap:operation soapAction="http://www.openuri.org/RegisterService" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="RegisterService">
<port name="RegisterServiceSoap" binding="s0:RegisterServiceSoap">
<soap:address location="http://localhost:7001/RegisterService.jws"/>
</port>
</service>
</definitions>
I'd like the the consumer of the web service to send it a document with the fields formatted to the VendorInterface complextype which contains the other complextypes. In return the consumer will get another document with some acknowledgement messages.
To make this happen I'd like to generate the web service, creating the complex type classes and XMLBeans. I'd like advice on the steps to take once I get a good WSDL.
There is also the option to go from the other direction. Is it better to attempt to create a schema XSD document instead and use that to work towards the web service and WSDL? If so, could someone give an example of how to format an XSD using my example needs.

I think I have got it all in place, though I have not tested it as of yet. For others who are looking at this, here is my XSD file from which all my complextypes were generated and lastly here is the actual web service file.
?xml version="1.0"?>
<xs:schema targetNamespace="http://openuri.org/RegisterService"
xmlns:rs="http://openuri.org/RegisterService"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified"
xmlns:tns="http://temp.openuri.org/VerizonBOBO/RegisterServiceRequestDocument.xsd">
<xs:element name="RegisterServiceRequest" type="rs:VendorStockingInterface"/>
<xs:complexType name="DeviceCapabilitiesType">
<xs:sequence>
<xs:element name="OSName" type="xs:string" nillable="true"/>
<xs:element name="OSVersion" type="xs:string" nillable="true"/>
<xs:element name="BRType" type="xs:string" nillable="true"/>
<xs:element name="DisplayColors" type="xs:string" nillable="true"/>
<xs:element name="DisplayTechnology" type="xs:string" nillable="true"/>
<xs:element name="NetworkAccess" type="xs:boolean" nillable="true"/>
<xs:element name="DownloadMethod" type="xs:string" nillable="true"/>
<xs:element name="DownloadVersion" type="xs:string" nillable="true"/>
<xs:element name="Protocols" type="xs:string" nillable="true"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="LicenseType">
<xs:sequence>
<xs:element name="Licences" type="xs:string" nillable="false"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PriceValue">
<xs:sequence>
<xs:element name="Value" type="xs:float" nillable="false"/>
<xs:element name="CurrencyType" type="xs:string" nillable="false"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="RevenueModelType">
<xs:sequence>
<xs:element name="VSRP" type="rs:PriceValue" nillable="true"/>
<xs:element name="WholesalePrice" type="rs:PriceValue" nillable="true"/>
<xs:element name="VendorSplitPercentage" type="xs:float" nillable="true"/>
<xs:element name="VendorPurchasePrice" type="rs:PriceValue" nillable="true"/>
<xs:element name="License" type="rs:LicenseType" nillable="false"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="VendorItemIdentifierType">
<xs:sequence>
<xs:element name="VendorProductDisplay" type="xs:string" nillable="false"/>
<xs:element name="VendorProductVersion" type="xs:string" nillable="false"/>
<xs:element name="VendorProductCode" type="xs:string" nillable="false"/>
     </xs:sequence>
</xs:complexType>
<xs:complexType name="VendorBriefType">
<xs:sequence>
<xs:element name="VendorID" type="xs:string" nillable="false"/>
     </xs:sequence>
</xs:complexType>
<xs:complexType name="VendorItemBriefType">
<xs:sequence>
<xs:element name="VendorProductID" type="rs:VendorItemIdentifierType" nillable="false"/>
<xs:element name="VendorID" type="rs:VendorBriefType" nillable="false"/>
<xs:element name="VendorDescription" type="xs:string" nillable="true"/>
<xs:element name="VendorPricing" type="rs:RevenueModelType" nillable="false"/>
<xs:element name="DownloadURL" type="xs:string" nillable="true"/>
<xs:element name="ShortCode" type="xs:string" nillable="true"/>
<xs:element name="ApplicationCode" type="xs:string" nillable="true"/>
<xs:element name="DRMMethod" type="xs:string" nillable="true"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="ContentType">
<xs:sequence>
<xs:element name="Categorization" type="xs:string"/>
<xs:element name="MIMEType" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="VendorStockingInterface">
<xs:sequence>
<xs:element name="VendorItemInfo" type="rs:VendorItemBriefType"/>
<xs:element name="ProductType" type="rs:ContentType"/>
<xs:element name="DeviceRequirements" type="rs:DeviceCapabilitiesType"/>
<xs:element name="VendorPricing" type="rs:RevenueModelType"/>
<xs:element name="ProgramMemory" type="xs:int"/>
<xs:element name="DataMemory" type="xs:int"/>
<xs:element name="Author" type="xs:string"/>
<xs:element name="Language" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="RegisterServiceResponse">
<xs:sequence>
<xs:element name="Message" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
The Web Service File:
import org.openuri.registerService.RegisterServiceResponse;
import org.openuri.registerService.RegisterServiceRequestDocument;
import com.verizon.hp.registerservice.*;
public class RegisterService implements com.bea.jws.WebService
static final long serialVersionUID = 1L;
* @common:operation
* @jws:protocol form-post="false" form-get="false"
public org.openuri.registerService.RegisterServiceResponse RegisterService(org.openuri.registerService.RegisterServiceRequestDocument RegisterServiceDoc)
VendorStockingInterface vsInterface = (VendorStockingInterface)RegisterServiceDoc.getRegisterServiceRequest();
System.out.println(vsInterface.toString());
com.verizon.hp.registerservice.RegisterServiceResponse serviceResponse = new com.verizon.hp.registerservice.RegisterServiceResponse();
serviceResponse.setMessage("Register New Service Message has been received successfully");
org.openuri.registerService.RegisterServiceResponse response = (org.openuri.registerService.RegisterServiceResponse)serviceResponse;
return response;
}

Implement workflow process for material reservation using tcode IW32

Hi
How can I implement workflow process for material reservation using tcode IW32
- PM order.
Thanks,
Amos

Hi;
Have been able to find the solution to create the IDoc MRESCR after entering a reservation?
I am in the same situation and I do not see the IDoc output in the BD87.
It would be nice if you share the solution.
Thanks in advance

Using Javascript to email a form in a workflow process

I've created an Acroform which will be routed around in a workflow process. The user will open the form, add information and hit a button which is coded in javascript usng the mailDoc function.
It works perfectly EXCEPT that each time the document is forwarded, "Adobe Acrobat Pro.pdf" gets appended to the name of the file in the email. It doesn't actually rename the file, so the file does open properly, but the email looks pretty goofy.
Example. The filename is Form14.pdf.
When the third person signs off and clicks the email button, the email is created, with the address, subject line and body of the email completed, and the document attached has the little icon and then
- Form 14.pdf - Adobe Acrobat Pro.pdf - Adobe Acrobat Pro.pdf - Adobe Acrobat Pro.pdf
Is there some way to prevent it from concatenating like this every time the document is emailed?
Thanks!!!

Maybe you could try it like this... I saw this question answered not too long ago.
Submit Portal Form Values to Portal Report

Use of Execution Type in Workflow process step.

Similar Messages

Maybe you are looking for