Use of segment, data-type or segment not supported in this position
A message sent to adapter "FILE" on send port "SendPort1" with URI "D:\Shared Files\Coparn\%MessageID%.xml" is suspended.
Error details: Unable to read the stream produced by the pipeline.
Details: Error: 1 (Segment level error)
SegmentID: TDT
Position in TS: 2
15: Use of segment, data-type or segment not supported in this position.
Im getting the error while trying to generate COPARN EDI file using BizTalk.
When I checked all the elements are occurring in the correct positions with accepted values only. Kindly assist.
Regards, Vivin.
There seems problem with your Pipeline component ,I would suggest to debug the Pipeline component to verify the exact issue you are facing.
There is similiar thread for thsi issue which can provide you the guidance .
http://social.msdn.microsoft.com/Forums/en-US/f80c870c-a4f9-4d65-9d3c-d43d7f060557/biztalk-console-error-message-unable-to-read-the-stream-produced-by-the-pipeline?forum=biztalkediandas2
Thanks
Abhishek
Similar Messages
-
Account assignment to Profit. segment not supported with this G/L account
Hello Guru,
we have activated the COPA- Costing based. after activation while doing the Shipping Cost calculation thr T.C VI01
system is throughing error message
Account assignment to Profit. segment not supported with this G/L account
Message no. ME032
Thanks And Advance
Laxmi narayanHi
Probably the GL Account is not created as Cost element with CE category 1 (costs)
Jayaram -
?I'm trying to download a free app and I keep getting a message that says; "Payment Type paypal is not supported on this device blah blah go to the iTunes Store on your computer. You must verify your payment info before you can make purchases. I did all that, updated payment info and checked paypal it is verified, and it still won't work. Im stumped
If you still have problem, contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html -
Conversion of a data object of type "C" to type "l" is not supported
Experts:
i have below code in my FM; defined as remote-enabled module.
when i execute i get the error analysis as:
You attempted to move one data object to another.
This is not possible here because the conversion of a data object
of type "C" to type "l" is not supported.
This at the line move <FS2> TO <wwa_mdm_name_value_pair>-VALUE .
what are the steps to debug this? Thanks!
DATA: tt_mdm_name_value_pair_table TYPE mdm_name_value_pair_table.
FIELD-SYMBOLS : <wwa_mdm_name_value_pair> LIKE LINE OF tt_mdm_name_value_pair_table.
FIELD-SYMBOLS <FS1> TYPE ANY.
FIELD-SYMBOLS <FS2> TYPE any.
data:st_mdm_name_value_pair type mdm_name_value_pair.
assign st_mdm_name_value_pair to <wwa_mdm_name_value_pair>.
assign st_mdm_name_value_pair-code to <FS1>.
assign st_mdm_name_value_pair-value to <FS2>.
clear wa_ZSTRESULT.
loop at T_UPDATE into wa_ZSTRESULT.
assign wa_ZSTRESULT-field to <FS1>.
<wwa_mdm_name_value_pair>-CODE = <FS1>.
assign wa_ZSTRESULT-VALUE to <FS2>.
move <FS2> TO <wwa_mdm_name_value_pair>-VALUE .
append <wwa_mdm_name_value_pair> to tt_mdm_name_value_pair_table.
endloop.resolved using GET REFERENCE.. code looks as below: Thanks!
DATA: tt_mdm_name_value_pair_table TYPE mdm_name_value_pair_table.
FIELD-SYMBOLS : <wwa_mdm_name_value_pair> TYPE LINE OF mdm_name_value_pair_table.
FIELD-SYMBOLS <FS1> TYPE ANY.
FIELD-SYMBOLS <FS2> TYPE DATA.
TYPES t_dref TYPE REF TO DATA.
DATA dref TYPE REF TO DATA.
DATA: TT_UPDATE TYPE ZTYRESULT.
FIELD-SYMBOLS : <WA_UPDATE> LIKE LINE OF TT_UPDATE.
data: st_mdm_name_value_pair type mdm_name_value_pair.
assign st_mdm_name_value_pair to <wwa_mdm_name_value_pair>.
assign st_mdm_name_value_pair-code to <FS1>.
assign st_mdm_name_value_pair-value to <FS2>.
clear wa_ZSTRESULT.
TT_UPDATE = T_UPDATE.
loop at TT_UPDATE assigning <WA_UPDATE>.
assign <WA_UPDATE>-FIELD to <FS1>.
<wwa_mdm_name_value_pair>-CODE = <FS1>.
assign <WA_UPDATE>-VALUE to <FS2>.
GET REFERENCE OF <WA_UPDATE>-VALUE INTO dref.
* MOVE dref TO <wwa_mdm_name_value_pair>-VALUE.
<wwa_mdm_name_value_pair>-VALUE = dref.
append <wwa_mdm_name_value_pair> to tt_mdm_name_value_pair_table.
endloop. -
Hi all,
While viewing report in SSRS 2008 i am getting an error like this
Warning 1 [rsInvalidExpressionDataType] The Value expression used in textrun ‘Textbox21.Paragraphs[0].TextRuns[0]’ returned a data type that is not valid.
sotred procedure
ALTER
Procedure [dbo].[spGetSupervisor]
@START_DATE
datetime,
@END_DATE
datetime,
@CenterID
varchar(4000),
@TITLE
varchar(100)
=
NULL
as
Select
Distinct L1_ID SupID,
L1_Name SupName
from
REF_DB.info v
inner
join dbo.fn_MVParam(@CenterID
+
P
v
.CenterID
= p.Column1
where
v.startdate
<= @END_DATE
and v.enddate
>= @START_DATE
and
(v.title
IN
(@TITLE)
or @title
is
order
by Name
Here is the expression in Report textbox
=Parameters!CenterID.Label
Please
help me
Thanks
in advance
Jyo
null)
ONHi Jyo1105,
Thanks for your question. Based on my research and experiences, the issue may be caused by you set the @CenterID
is a multiple values parameter.
If in this condition, you couldn’t use the expression of
Parameters!CenterID.Value directly, you
should use a join() function on the parameter to merge the whole values, or add a sequence number behind the expression to use a specific value, just like this:
=join(Parameters! CenterID.Value) or
=Parameters! CenterID.Value(0)
If your issue still exsits, please feel free to let me know.
Thanks,
Sharp Wang
Best Regards. Sharp Wang -
ADF View Object query to use Oracle LONG data type
Hi,
I'm using a view object that uses Oracle LONG data type.The following exception is thrown
*"java.sql.SQLException: Stream has already been closed"* and it is not fetching the correct data.
I have searched in many forums,they suggested to use LOB instead of LONG as LONG is deprecated. But in my case I can't avoid using LONG as some of my legacy applications using the same DB.
Please suggest me a way
Thanks in Advance
FelixThanks for your reply Arun,
I have solved this problem using the solution suggested by this blog [AskTom-Link|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:839298816582]
In the above blog link,they have suggested to convert Long to Varchar by functions and asked to use this function in the column.
Thank you all guys who have seen this post.
Regards,
Felix -
Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?Hi
To run Mouitain Lion you need to update Logic.
For the updaters to work the Logic application must be:
a) Within the Applications folder, and not in any sub-folder
b) Named "Logic Pro" with no extra numbers or spaces
CCT -
For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone
mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR -
The type of Raw File used in my Canon 7D MKll is not supported in Camera Raw, Adobe Bridge or Photoshop 5S. How do I fix this?
I gather you are using Photoshop CS5? The most recent Camera Raw version that CS5 will accept is ACR 6.7. Support for the Canon 7D Mark II was added in ACR 8.7.1. You will have to use the DNG converter to covert your CR2 files to the universal DNG raw format. Here are the links for the DNG converter:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
Benjamin -
Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file
How do I fix this?That would probably be a question best taken up in on a site for Windows support questions. Not knowing anything about the movie you're trying to play, all I can suggest is to confirm that the format of the movie you wish to play is supported in your version of WMP. If it isn't, you'll either need to convert the movie or use some other player software.
Regards. -
External definition and used them as Data Type Templates
hi all
how to Develop external definition and used them as Data Type Templates .
Thank u
SwariHI
External Definitions: If a definition of the message structure exists in wsdl, xsd, dtd formats, we can use it in the integration repository by importing it as an external definition.
External Definations:
An external definition enables you to import a local WSDL, XSD, or DTD file to the Integration Repository and specify which parts of the schema to extract as the description for a message. You can use these extracted message schema as:
Output or input messages in message interfaces
Source or target structures for message mappings
There is a series of standard schema for describing the message structure at runtime. WSDL (Web Service Description Language), XSD (XML Schema Definition Language), or DTDs (Document Type Definitions) are often used to describe message schema. If a description of the message structure already exists in one of the above formats, you can use it in the Integration Repository by importing it as an external definition rather than re-entering it manually using the data type editor.
Have a look at
http://help.sap.com/saphelp_nw04/helpdata/en/43/ce49ef1019087ae10000000a1553f6/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ba/d4c23b95c8466ce10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm
cheers -
Help with Multi point chart plot hile using the waveform data type..
Currently I have two channels being transfered into the AI C-Scan block (by means of a build array) in hopes to display the outputs on a chart as well as an output file. As an outout I am using the waveform data type, as I hear this is the way to go. Problem is that I have the the Waveform chart directly connected to the waveform out put the the AI C-SCAN block but nothing is being displayed on the chart. Although the time is updated on the chart it is listed as the year 1903. I do have data these channels as the there are digital outputs for these channels. Perhaps I should use the AI CONFIG and AI READ clocks rather than this AI C-SCAN. Any ideas...
Christian,
Please see the Real-Time Chart shipping example for LabVIEW. This example describes how to set the base time of the chart so that the time and date are correct.
You may want to autoscale the Y-axis as your data may be out of range of your chart and that is why nothing is seen.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask -
Problem importing two service interfaces using the same data types
Hi,
I've been playing around with BPM for a while. Now I wanted to add a custom service interface to my starting event. I created the interface in ESR of CE 7.11. After importing I get this error message and I can't use the interface:
Cannot change XsdSimpleTypeDefinition AcademicTitleCodeContent by importing the document http://sap.com/xi/APPL/SE/Global::src/wsdl/TestInterface.wsdl, because it is already defined in the document http://sap.com/xi/APPL/SE/Global::src/wsdl/rootwsdl_CustomerERPByIDQueryResponse_InService.wsdl in this project. Importing into another project might be possible.
Of course the problem is clear, but how can I achieve importing two service interfaces that use the same data type without changing the xsd source?
Thanks in advance,
ManeSorry for the late answer, but I am really busy at the moment.
Unfortunately I can't the Interface and data types are already changed.
But this happened various times. Each time I already had imported a SAP Enterprise Service into NW BPM that contains a bunch of inline data types. While creating my own interface I referenced one of those data types that are stored in a SAP namespace. After import the error message appeared.
In the wsdl of the created interface there is a import statement for the namespace where the referenced data types origin from. Additionally there is a namespace definition xmlns:p1="SAPnamespace". In the element the type is "p1:ReferencedType". Could this maybe cause the error, because one time it is with this leading p1 in my created wsdl and once without in the SAP Service wsdl?
Thanks and I am looking forward to next EhP of NW BPM,
Mane -
Can't open the application Safari... not supported on this type of MAC
Installed Software:
9/20/13 10:15 PM Digital Camera RAW Compatibility Update 4.09
9/20/13 10:15 PM Security Update 2013-004 1.0
9/20/13 10:15 PM iTunes 11.1.0
8/18/13 12:25 AM Security Update 2013-003 1.0
6/22/13 1:30 PM Safari 6.0.5
6/22/13 1:30 PM Security Update 2013-002 1.0
3/4/13 8:41 PM MacBook Pro SMC Firmware Update 1.7
3/4/13 8:41 PM Safari 6.0.2
2/13/13 2:18 AM Mac OS X Update 10.7.5
Since the 9/20/13 update, I see a circle with a line through it on top of the Safari application. When I try to execute anyway, I get:
"You can't open the application Safari because it is not supported on this type of Mac."
I vaguely remember some capability to rollback any updates. Is this true?
Where should I go from here?First you need to clear out some space on the startup volume. You should have at least 9 GB available. Then do as follows.
If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. -
Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments
Maybe you are looking for
-
How to Make All Events in One Calendar Have Alerts Automatically
I am a college student majoring in engineering, which means I always have lots of homework due at various times. So to help me keep better track of when my assignments are due, I have started putting the due dates into my calendar. The only problem w
-
HI All, Can any one tell me is there any standard report for the t.codes used by users for certain period other than t.code sm20 and st03n Thanks phaneendra
-
ECN field obliged when changing a BOM
Hi all, I found after flaged the historical demand and ECM in OS27,it is still just a warning message that tells the user a ECN should be maintained when doing CS02,changing the message type and category is not available in the standard system. How
-
Applications crash often since 10.4.8 upgrade
I believe my problems started since the most recent Security Update download, a week or two ago. Finder, Mail, Safari, MS Word, Photoshop, Photo Mechanic, all have quit or frozen repeatedly. Sometimes Force Quit works on a frozen app, sometimes not.
-
Help newbie - adding facebook/twitter buttons to pages?
Hiya, Haven't been on here for a while, but people were so kind and helpful last time I was struggling. I desperately want to add buttons on my webpages for things like facebook and twitter so people can like/share the pages. I've been to the social