Use the sales employee, you need an HR master record
hi:
when I do vpe1 in sd model ,it prompt two transport request .
In order to use the sales employee, you need an HR master record. If you do not use the Human Resources application component (HR), you can transport the HR tables that you need for creating, changing or displaying a sales employee from client 000 into the target client.
How should i do?
I'm moving this thread to the SD forum.... This is a funtional issue not a technical one.
Regards
Juan
Similar Messages
-
Where is anla-xafabch ( Asset acquired used ) field filled when you create an asset master record?
I'm trying to figure out when is informed the field xafabch , but it doesn't appear in data master (AS01, AS02) and it's not available in data master structure in customizing.
Hi Daniel,
the field comes together with supplier within origin.
Kind Regards,
Steffen -
You are not authorized to change the sales employee
Hi everyone ,
when I add an new bussiness partner not with the default sales employee ,I can't finish adding except loging on the system using manager or superuser before. the system tells that "You are not authorized to change the sales employee". This problem had been raised by someone else already,But It still confused me .I have explored the problem in b1 system and has got these results like following:
first ,there are three places where we can set default Salse mployee.
Path1 Administation/Setup/General/Sales Employees
or Path2 Human Resources/Employee Master Data/Sales Employee
or Path3 Administation/Setup/General/Users/Defaults/New/Defaults/Sales Employee
If you add a new BP , the default Sales Employee will get the value from Path3 .
If it is empty from Path3 ,it will get the value from Path2.
If it is also empty from Path2,then it will get the value from Path1.
There is Only one conditon that In Employee Master Data ,the employee is related with User and Sales Employee.
My question is that since I connected employee with User I can't change the sales employee when adding a new BP.
Another question is that since I connnected sales employee(Mike) with employee(Jone) I can't select the sales employee (Mike) as a sales employee when adding a new BP using other user loging on the system.
There Is no problem if I connect no employee with User.But If I do so ,How Can I do the Data Ownership Authorization.
Edited by: Li Mishan on Apr 17, 2008 9:40 AM
Edited by: Susanne Klemm on May 7, 2008 2:00 PM
Edited by: Philip Eller on May 21, 2008 9:02 AMI forget to say that I had already give the user all Authorizations.I have copy the authorization from manager.
One thing I am sure that :
If you connet the sales employee with one employee,that means that sales employee can be only used by the user connected to the employee at the same time.others can't use it.
If you connet the user with employee,that means ,when log on the system with the user,you can only use the sales employee that you connected with employee at the same time.you can't use others
Edited by: Li Mishan on Apr 17, 2008 10:55 AM -
When I try to open a recent document I get the following message "You need a newer version of Pages to open this document." I have downloaded version Pages version 5.2.2 and the app store confirms this (and won't let me download it again), but my Pages About reports that I am using 4.3
Here is the solution that I received from the chat line.
When you update applications like Pages it usually keeps both versions on the computer. So what most likely happened is it didn’t put the new version on your dock. So to fix this, open a finder window. And go into applications which should be listed on the left. Scroll down and you will see Pages listed in here. And the icon should look different. You can drag that icon down onto your dock.Open that and you then can access your documents -
Why we need to use the RMI if you have JSPs? or vice versa
Hi friends,
Can anyone please explain me whats the difference between RMI and JSP?
All I know is how to code and implement them both but can't figure out which one has more advantage than the other.
Actually this was the Interview question asked to me once,
The question was "Why we need to use the RMI if you have JSPs? or vice versa"
Please let me know if you have any answers for this.
Thank you.harsh884 wrote:
Well I may not have very deep knowledge about them both but from the little bit of coding practice and implementation I know that too, that they are different technology and the implementation is also different. But didnt know what to answer for this question to interviewer.My answer would have been along the lines of using the right tool for the requirements. Use RMI when you want to work with remote objects "directly", but don't want to hassle with handling all the networking manually or restrict yourself to the HTTP protocol and an inappropriate use of the view layer in model 2 applications.
Thanks anyways for the reply.You're welcome. How did the rest of the interview go?
~ -
Hi,
I update recently my OS to Yosemite and decided to use Safari again as my web browser (I was using Chrome). Some of the sites I need to access for professional reasons are not available with safari. I receive the message: "403 - Forbidden: Access is denied.You do not have permission to view this directory or page using the credentials that you supplied.". I believe there is a pattern here, they are all sites publish with IIS with SSL and build with ASP.NET.
I can access them with Chrome (on OS X) or with Internet Explorer (with my Windows VMs).
I've already cleared all saved passwords, cookies, history, etc...the problem remains. I'm sure this is a known problem, but all the answers I've found on the internet were for things like DNS and unavailability of the site. The sites are working fine and I can access them with Chrome.
Can anybody help me? An explanation would also be nice :-) Something to do with Microsoft Authentication methods ?
Thanks,Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP. -
I just tried to access a website that I regularly access several times a day. However, this evening I received the following message: 403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
I have never seen this before, and have no idea what it means, or how to access the site. Does it have anything to do with my security settings? Help. I belong to the site, and need to access it.Do you need to login to access that website?
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
The Nordins - Options for the next time you need a customer!
The headline is from an email we received: "Verizon - Options for the next time you need customer service!" Well, we changed it, just slightly. Well, on 6/20/2013 we had the TV down; it was said to be a piece of video equipment that went down. We could not get anything on the TV until next day. The sad part is that we were watching the Heat-Spurs game and it quit just 1min-36sec. prior to the end of the game. Then, we could not watch our daily Netflix show we watch every evening before going to bed. So in calling twice, we found out about the video equipment problem. But typically Verizon, they replaced the equipment and thought nothing about the customer that actually lost the reception!! How about crediting us for the time "off the air". You can't have the cake and eat it too. Then, Verizon sends us emails about the bill, customer service, etc. but there is no way for us to email them back!! Why do they think my time is less valuable then theirs; having to call their customer service and to wait a long time for answer by someone in "God knows where country". What does that tell you about the customer service commitment! It's like, yeah you are one of the slob users that keep paying the bills for lousy service. Perhaps it's time for all of us to switch off our TV's for one or two days a week and not pay them for "our time off the grid". Having some couple of thousand TV's off twice a week may shake them up a bit. So here is my idea. Establish an email address where we can reach anyone in customer service directly, in our own state, not somewhere 1000 and more miles away. Additionally, if something is down, does not matter what time of the day, stand up for it and give the customer their credit due. Thanks for reading
It all depends how you use it.
Once the initial break in period is over, like the first year, it should run just fine as long as you don't abuse it, don't let it overheat, keep the dust out etc.
Do get the AppleCare as it's very expensive to repair a Mac.
Some tips:
1: Avoid using the built in keyboard and trackpad as much as possible. I know what's the use, but it's these too area's, the USB ports and the Superdrive that experience the most wear and tear.
2: If you do use the built in keyboard, take off your watch and jewelry, it scratches. mars, reacts with the case and discolors it.
3: The keybord is a bit weak compared to regular PC desktop keyboards, so use a wireless one, but have a wired one around for emergencies. The keyboard collects dirt, grime, hair, dust etc, underneath, you might want to have a light cover over the keys but still let air get underneath.
4: Be gentle with the audio ports and the Superdrive, don't use your computer for watching DVD's. The Superdrive is important for recovering the machine with the installer disk which also must be well taken care of.
5: A GOOD case, like a MacTruck or a padded one will absorb the shocks if dropped while transporting.
6: The biggest concern is other people, they just don't handle things with care because it's not theirs and they are ignorant or even spiteful of the money you spent to have a quality machine.
7: Clone your boot drive to a external regularly, in fact have two, one staggered back in time a few weeks, it's hold option bootable in case your hard drive dies. Free cloning software like Carbon Copy Cloner or the commercial version Superduper does the job well. -
Do you need Final cut in order to use Motion 5 or can I use iMovie?, Do you need Final cut in order to use Motion 5 or can I use iMovie?
i think you confused us with the question 4 times!?
you can use Motion aas a stand alone app, which can output quicktimes to any codec you want, which can then be used in any app that accepts these codecs. But you wont be able to (AFAIK) import a motion project into iMovie and use it as a clip like you can in fcpx
hth
adam -
Hello, I've installed Lion but now it says I can't use the Cloud as I need the Apple ID Password to use Back to My Mac. I've obtained several new Apple ID passwords which work ok on my phone but doesn't seem to be the password it's looking for.Does anyone know what's needed please ??
It's probably looking for the Apple ID & Password you used to purchase Lion, or ML as the case may be.
Thse are the Mountain Lion forums, is that what you meant? -
Freeze !!! Then the message read "you need to restart your computer.
New MAC User..
I just purchased a used G4 from Ebay and it was love at first login, but after 2 weeks my heart is broken as I write this post from my XP box. A few spec's as well as a little history. My spec's are 450 cpu, 20 gig hdd, 512 memory. I did a bios update as well as a 256 memory upgrade a week after purchase. Here's the issue. The system will freeze at any given time. The message read "you need to restart your computer. Hold down the power button etc. Now, to stay on track I uninstalled the additional memory, which was the only hardware change made to the system but it still froze.
As I record this post my MAC is going through this freeze slash send error report ordeal. Now let me record a few lines from the report. Unresolved Kernal trap (cpu 0):0x300 data access, etc.
I believe the problem started after I ran the software update for Tiger X. What I also found out was OS-9 is installed on this PC as well. When I found out how to boot to OS-9 it ran for 2 days without freezing. Soon as I booted to X boom. The other strange part of this eqaution is that in the X environment it could take 2hr to freeze or 10 minutes.
I ran Disk Utility to repair but no luck.How do I uninstall the X updates? or do you guys think it's another issue. Oh, I did not receive any software from the seller so my next move was to purchase Tiger and do a clean install.
(Loving My New (old) MAC....)BUT !!!!The problem is not Unix per se. The situation, from what I have read, is as follows.
UNIX is a massive os that loads as much into ram as possible for performance. If ram is not dead on, problems ensue with corruption of data.
UNIX has been server technology and was traditionally installed in a professionally built and maintained environment. It frequently uses ECC ram which is more expensive and adds another layer of overhead to a system. For an enterprise system those cost are negligible.
Apple builds it's macs for non ECC ram for cost and for speed. The ram must be correct or the system will corrut itself. There are no mechanisms to correct for bad/marginal ram(cost and speed). To account for this Apple has very tight tolerances for the ram installed.
Each version of X has tightened the tolerances on the ram. Why? Because as time goes on, the macs are getting faster and the os more complex. A car that only goes 25mph can have flaky brakes, suspension, etc and still get by. As the speed of the cars increase the rest of the system must be improved (timing of ram in this case) or crashes ensue. So, even if your mac isn't going any faster the os that you are trying to use has specs for faster macs built in. It isn't UNIX but Apple's implementation of UNIX. As the macs speed increases, look for tighter specs on macs. I expect that this will happed with Intel macs as their clock speeds are higher. -
Ability log and track the time and expense reports of the sales employees
Hello Experts
Ability to log and track the time and expense reports of the sales employees.
Can we do this through WEB UI
Please revert.
RegardsHello
Thanks for the reply
I thought of storing time zone in the time and use session variable to pick up user's log in info along with time zone that he is associated with.
However, if it has to be maintained by a table, then it should be manually updated right? I don't think that's what I want to do because a lot of our users travel a lot for short time, so they may not have their time zone info updated in the DB table when they are traveling somewhere else for a brief period while accessing OBIEE.
So my question is, how can I pick up user's locale time zone setting and make sure that the data, such as hour conversation are converted along with the displayed time stamp?
Thanks -
When I try to login to the website of my bank, I get the following error message:
403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
I have a new MacBook Air with OS Yosemite installed.
What is the problem and how can I solve it?Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP. -
I got this message when trying to checkout from a site store:
403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
Any ideas how can I solve it?Ask the people running the store; that error generally means that you tried to do something they don't allow or something's wrong on their end.
(89086) -
I have had to replace a faulty hard-drive on my imac. Some applications (incl iphoto) are telling me that my OSX (10.82?) isnt recent enough to use the application. I need 10.9. I have upgraded to Maverick but this remains the case. Any help?
If your Mac is from the age of Mac OS X 10.8.2:
How to find your Mac's model and age?
Contact AppleCare to request the prebundled iPhoto be uploaded to the Mac App Store, or the Mac App Store support.
This is just a user to user forum. This link goes direct to the Apple Store support:
http://www.apple.com/support/mac/app-store/contact.html?form=account&topic=MacAp pStoreAccountandBilling
Maybe you are looking for
-
How do I use the Flash downloader add-on on a web page?
I downloaded Firefox because I thought it included a Flash downloader automatically. I have now added what I believe to be the Flash download add-on, but I can't see how it works. I'm running Windows 7, 64 bit on a PC.
-
i disabled flash plugin. now i open site - http://www.coursesmart.com/9780495797494/2 page contains images.When i click on print preview button, i cant see anything.... also i tried all pdf plugins and extensions, but none help to convert/print page
-
I have been a long time iTunes store shopper, and traditionally I've always looked forward to the updates, but one of the changes in the most recent version really irks me. I absolutely cannot stand the new wish list feature. In my opinion, it's a bu
-
Field in portal table for the text contained in an uploaded file
I have uploaded a file of base item type file into release 2 of the portal. Does anyone know which table the clob field for the text contained in the uploaded file is stored? Thanks, Suzanne
-
Make completed survey in activity available in MSA
Hello, we have created a Marketing Campaign in CRM Online which: includes a satisfaction survey sends an e-mail with URL to BPs in a target group creates an activity for each BP based on an activity template the bp completes the survey via a bsp page