Used 30GB in 2 days?!!?!?

Hi, I've used 30GB in 2 days and it seems to be coming from "124-149-191-162.dyn.iinet.net.au" on port 548 which is Apple Filing port, if you need any details just ask.
Screen Shots of port and other
This is just when I started the app (rubbernet) to see what it was, it has since gone up way higher than that.

I realize this may be 2 months too late, I saw your issue when browsing similar topics.
That is somewhat worrying if you don't know why 'the internet' would be using AFP on your Mac.
I would strongly suggest you disable AFP in 'System Preference > Sharing'. Disable file sharing.
Your router should protect you from external requests into the network (that is what a firewall does), so either the router is misconfigured with port 548 pointed to your Mac (never a good idea).
The Firewall may be disabled (a terrible idea).
Or your Mac is running something that causes it to connect to an AFP server at the address mentioned.
Do you have access to the router settings? If not speak to whoever set it up. If port 548 is letting in traffic it may also let in many other ports too.
'Shields Up' can indicate what the router is looks like from the internet (what ports are open, closed or 'stealthed' etc).
https://www.grc.com/x/ne.dll?bh0bkyd2
The tool looks a little old but the guy who makes it is very good
Run the 'Instant UPnP test' & the sheilds up 'All Service ports' tests, post a text summary here if you want assistance.
Don't keep trying shields up though or your ISP may assume his server is attacking you & block his server (it's just a portscan, but some ISP's don't like it).

Similar Messages

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
Annalisa

Don't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Useful Code of the Day: Splash Screen & Busy Application

So you are making an Swing application. So what are two common things to do in it?
1) Display a splash screen.
2) Block user input when busy.
Enter AppFrame! It's a JFrame subclass which has a glass pane overlay option to block input (setBusy()). While "busy", it displays the system wait cursor.
It also supports display of a splash screen. There's a default splash screen if you don't provide a component to be the splash screen, and an initializer runner which takes a Runnable object. The Runnable object can then modify the splash screen component, for example to update a progress bar or text. See the main method for example usage.
It also has a method to center a component on another component (useful for dialogs) or center the component on the screen.
NOTE on setBusy: I do recall issues with the setBusy option to block input. I recall it having a problem on some Unix systems, but I can't remember the details offhand (sorry).
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
* <CODE>AppFrame</CODE> is a <CODE>javax.swing.JFrame</CODE> subclass that
* provides some convenient methods for applications. This class implements
* all the same constructors as <CODE>JFrame</CODE>, plus a few others.
* Methods exist to show the frame centered on the screen, display a splash
* screen, run an initializer thread and set the frame as "busy" to block
* user input.
public class AppFrame extends JFrame implements KeyListener, MouseListener {
 * The splash screen window.
 private JWindow splash = null;
 * The busy state of the frame.
 private boolean busy = false;
 * The glass pane used when busy.
 private Component glassPane = null;
 * The original glass pane, which is reset when not busy.
 private Component defaultGlassPane = null;
 * Creates a new <CODE>AppFrame</CODE>.
 public AppFrame() {
 super();
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified
 * <CODE>GraphicsConfiguration</CODE>.
 * @param gc the GraphicsConfiguration of a screen device
 public AppFrame(GraphicsConfiguration gc) {
 super(gc);
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified title.
 * @param title the title
 public AppFrame(String title) {
 super(title);
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified title and
 * <CODE>GraphicsConfiguration</CODE>.
 * @param title the title
 * @param gc the GraphicsConfiguration of a screen device
 public AppFrame(String title, GraphicsConfiguration gc) {
 super(title, gc);
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified title and
 * icon image.
 * @param title the title
 * @param icon the image icon
 public AppFrame(String title, Image icon) {
 super(title);
 setIconImage(icon);
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified title and
 * icon image.
 * @param title the title
 * @param icon the image icon
 public AppFrame(String title, ImageIcon icon) {
 this(title, icon.getImage());
 * Initializes internal frame settings.
 protected void init() {
 // set default close operation (which will likely be changed later)
 setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
 // set up the glass pane
 glassPane = new JPanel();
 ((JPanel)glassPane).setOpaque(false);
 glassPane.addKeyListener(this);
 glassPane.addMouseListener(this);
 * Displays a new <CODE>JWindow</CODE> as a splash screen using the
 * specified component as the content. The default size of the
 * component will be used to size the splash screen. See the
 * <CODE>showSplash(Component, int, int)</CODE> method description for
 * more details.
 * @param c the splash screen contents
 * @return the window object
 * @see #showSplash(Component, int, int)
 * @see #hideSplash()
 public JWindow showSplash(Component c) {
 return showSplash(c, -1, -1);
 * Displays a new <CODE>JWindow</CODE> as a splash screen using the
 * specified component as the content. The component should have all
 * the content it needs to display, like borders, images, text, etc.
 * The splash screen is centered on monitor. If width and height are
 * <CODE><= 0</CODE>, the default size of the component will be used
 * to size the splash screen.
 * 
 * The window object is returned to allow the application to manipulate
 * it, (such as move it or resize it, etc.). However, do not
 * dispose the window directly. Instead, use <CODE>hideSplash()</CODE>
 * to allow internal cleanup.
 * 
 * If the component is <CODE>null</CODE>, a default component with the
 * frame title and icon will be created.
 * 
 * The splash screen window will be passed the same
 * <CODE>GraphicsConfiguration</CODE> as this frame uses.
 * @param c the splash screen contents
 * @param w the splash screen width
 * @param h the splash screen height
 * @return the window object
 * @see #showSplash(Component)
 * @see #hideSplash()
 public JWindow showSplash(Component c, int w, int h) {
 // if a splash window was already created...
 if(splash != null) {
 // if it's showing, leave it; else null it
 if(splash.isShowing()) {
 return splash;
 } else {
 splash = null;
 // if the component is null, then create a generic splash screen
 // based on the frame title and icon
 if(c == null) {
 JPanel p = new JPanel();
 p.setBorder(BorderFactory.createCompoundBorder(
 BorderFactory.createRaisedBevelBorder(),
 BorderFactory.createEmptyBorder(10, 10, 10, 10)
 JLabel l = new JLabel("Loading application...");
 if(getTitle() != null) {
 l.setText("Loading " + getTitle() + "...");
 if(getIconImage() != null) {
 l.setIcon(new ImageIcon(getIconImage()));
 p.add(l);
 c = p;
 splash = new JWindow(this, getGraphicsConfiguration());
 splash.getContentPane().add(c);
 splash.pack();
 // set the splash screen size
 if(w > 0 && h > 0) {
 splash.setSize(w, h);
 } else {
 splash.setSize(c.getPreferredSize().width, c.getPreferredSize().height);
 centerComponent(splash);
 splash.show();
 return splash;
 * Disposes the splash window.
 * @see #showSplash(Component, int, int)
 * @see #showSplash(Component)
 public void hideSplash() {
 if(splash != null) {
 splash.dispose();
 splash = null;
 * Runs an initializer <CODE>Runnable</CODE> object in a new thread.
 * The initializer object should handle application initialization
 * steps. A typical use would be:
 * <OL>
 * <LI>Create the frame.
 * <LI>Create the splash screen component.
 * <LI>Call <CODE>showSplash()</CODE> to display splash screen.
 * <LI>Run the initializer, in which:
 * <UL>
 * <LI>Build the UI contents of the frame.
 * <LI>Perform other initialization (load settings, data, etc.).
 * <LI>Pack and show the frame.
 * <LI>Call <CODE>hideSplash()</CODE>.
 * </UL>
 * </OL>
 * 
 * NOTE: Since this will be done in a new thread that is
 * external to the event thread, any updates to the splash screen that
 * might be done should be triggered through with
 * <CODE>SwingUtilities.invokeAndWait(Runnable)</CODE>.
 * @param r the <CODE>Runnable</CODE> initializer
 public void runInitializer(Runnable r) {
 Thread t = new Thread(r);
 t.start();
 * Shows the frame centered on the screen.
 public void showCentered() {
 centerComponent(this);
 this.show();
 * Checks the busy state.
 * @return <CODE>true</CODE> if the frame is disabled;
 * <CODE>false</CODE> if the frame is enabled
 * @see #setBusy(boolean)
 public boolean isBusy() {
 return this.busy;
 * Sets the busy state. When busy, the glasspane is shown which will
 * consume all mouse and keyboard events, and a wait cursor is
 * set for the frame.
 * @param busy if <CODE>true</CODE>, disables frame;
 * if <CODE>false</CODE>, enables frame
 * @see #getBusy()
 public void setBusy(boolean busy) {
 // only set if changing
 if(this.busy != busy) {
 this.busy = busy;
 // If busy, keep current glass pane to put back when not
 // busy. This is done in case the application is using
 // it's own glass pane for something special.
 if(busy) {
 defaultGlassPane = getGlassPane();
 setGlassPane(glassPane);
 } else {
 setGlassPane(defaultGlassPane);
 defaultGlassPane = null;
 glassPane.setVisible(busy);
 glassPane.setCursor(busy ?
 Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR) :
 Cursor.getDefaultCursor()
 setCursor(glassPane.getCursor());
 * Handle key typed events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param ke the key event
 public void keyTyped(KeyEvent ke) {
 ke.consume();
 * Handle key released events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param ke the key event
 public void keyReleased(KeyEvent ke) {
 ke.consume();
 * Handle key pressed events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param ke the key event
 public void keyPressed(KeyEvent ke) {
 ke.consume();
 * Handle mouse clicked events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mouseClicked(MouseEvent me) {
 me.consume();
 * Handle mouse entered events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mouseEntered(MouseEvent me) {
 me.consume();
 * Handle mouse exited events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mouseExited(MouseEvent me) {
 me.consume();
 * Handle mouse pressed events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mousePressed(MouseEvent me) {
 me.consume();
 * Handle mouse released events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mouseReleased(MouseEvent me) {
 me.consume();
 * Centers the component <CODE>c</CODE> on the screen.
 * @param c the component to center
 * @see #centerComponent(Component, Component)
 public static void centerComponent(Component c) {
 centerComponent(c, null);
 * Centers the component <CODE>c</CODE> on component <CODE>p</CODE>.
 * If <CODE>p</CODE> is null, the component <CODE>c</CODE> will be
 * centered on the screen.
 * @param c the component to center
 * @param p the parent component to center on or null for screen
 * @see #centerComponent(Component)
 public static void centerComponent(Component c, Component p) {
 if(c != null) {
 Dimension d = (p != null ? p.getSize() :
 Toolkit.getDefaultToolkit().getScreenSize()
 c.setLocation(
 Math.max(0, (d.getSize().width/2) - (c.getSize().width/2)),
 Math.max(0, (d.getSize().height/2) - (c.getSize().height/2))
 * Main method. Used for testing.
 * @param args the arguments
 public static void main(String[] args) {
 final AppFrame f = new AppFrame("Test Application",
 new ImageIcon("center.gif"));
 f.showSplash(null);
 f.runInitializer(new Runnable() {
 public void run() {
 f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 f.getContentPane().add(new JButton("this is a frame"));
 f.pack();
 f.setSize(300, 400);
 try {
 Thread.currentThread().sleep(3000);
 } catch(Exception e) {}
 f.showCentered();
 f.setBusy(true);
 try {
 Thread.currentThread().sleep(100);
 } catch(Exception e) {}
 f.hideSplash();
 try {
 Thread.currentThread().sleep(3000);
 } catch(Exception e) {}
 f.setBusy(false);
"Useful Code of the Day" is supplied by the person who posted this message. This code is not guaranteed by any warranty whatsoever. The code is free to use and modify as you see fit. The code was tested and worked for the author. If anyone else has some useful code, feel free to post it under this heading.

Hi
Thanks fo this piece of code. This one really help me
Deepa

Since ios 7 I can no longer use google translate in safari. I use this page every day to translate friends Facebook entries. Anyone else having this problem? And is there a fix?

Since ios 7 I can no longer use google translate in safari. I use this page every day to translate friends Facebook entries. Anyone else having this problem? And is there a fix? Currently it is in my bookmark bar beside Facebook and worked fine until I upgraded top ios 7 a few days ago.

Go to your Google translate bookmark.
Type in a word then tap whatever language.
Make a select for the language to be translated to by tapping Dutch (or whatever language you see in the box all the way to the right. You should see a language menu.

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Ple

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Please re-install the software... I have no idea where my software is... That was many many years ago? HELP!!

When you go to the download page, you must do two things:
Download this file: PhSp_CS2_English.exe on the download page.
Use the serial number on the download page in order to install your non-activation copy.
Do not use your old CD or serial number. It no longer works.
If you have Windows 7, the advice is to turn off UAC and run the installer as Administrator.
Gene

In the past month or so my iPhone 5 battery is dying in hours, whereas it used to last all day at least. Also, I am getting constant "message send failures" when texting and frequent dropped phone calls.

Just recently my Iphone 5 battery is dying in a just a few hours, it used to last all day or more. I'm not doing anything different with it, although I have started shutting down apps etc. to conserve battery. I get constant "message send failures and frequently dropped phone calls.

My best bet would be to restore the phone. Back it up to itunes, and then reset it Factory settings. This way, any corrupt software will be removed, and you can start fresh. Make sure you back it up first. By the sounds of it, you are using the phone for business and probably need the data from it. Hope this helps!

I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

Have you went to Settings>General Time&Date and correct the time. Make sure the time zone is correct too. Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

Hi,I cannot use Acrobat after 30 days on my new PC Win7, seems to be an issue with activation.

Hi,I cannot use Acrobat after 30 days on my new PC Win7, seems to be an issue with activation.
Thanks
Wolfgang

Hi Sukrit,
The software package was bought from german distributor CANCOM on 2013-01-03.
I set up my account at Adobe and posted the serial number.
This is the licence:
After 30 days I could not use Acrobat. Most time I only need the distiller for creating pdf from
Indesign. I reinstalled Acrobat several times, after 30 days it stops working again.
I contacted the support but without success. This PC used WIN XP.
Now I got a new PC win WIN7.
I got the message to visit may account, which I did. I can't remember to ckeck the serial
number.
Photoshop and Indesign are working. Acrobat stopped after 30 days, this is the point my
request started.
Trying to put in the serial number again yields this:
Please be so kind to clear this issue.
With my best regards
Wolfgang Sauer
Am 4 Apr 2015 um 5:59 hat sukritd15 geschrieben:
Hi,I cannot use Acrobat after 30 days on my new PC Win7, seems to
be an issue with activation.
created by sukritd15 in Acrobat Installation & Update Issues - View the full discussion
Hi ,
Could you please elaborate more about the issue?
What are the challenges you are facing with activation of Acrobat ?
The basic method to activate/license Acrobat is by typing in your Adobe credentials ,i.e Adobe
ID and password.
That will let you access Acrobat easily.
Let us know if you are experiencing any more difficulties in activating Acrobat .
Regards
Sukrit Dhingra
If the reply above answers your question, please take a moment to mark this answer as correct by visiting:
https://forums.adobe.com/message/7405504#7405504 and clicking `Correct´ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To
post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message
please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7405504#7405504
To unsubscribe from this thread, please visit the message page at ,
click "Following" at the top right, & "Stop Following"
Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to
https://forums.adobe.com/thread/1516624.

Hi. I just bought a macbook air and I use two languages every day. How can I quickly move to another language while Im typing. Thanks

Hi. I just bought a macbook air and I use two languages every day. How can I quickly move to another language while Im typing. Thanks

still doesnt work.. I already selected 2 languages.. but i can change it just with the mouse. There is no shortcut for macbook air. cmd space doesnt work.

Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again.

Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again. I'm in the middle of a project that needs to go live tomorrow. HELP!!! Please.

Photoshop requires 512 Meg of VRAM or more to use the 3D features - that's been the same for version 14 (CC) and now 15 (CC 2014). Check Help->System Info to see how much your card says it has.

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i

Useful Code of the Day: Multipart Form File Upload

So, you want to upload files to your web server, do ya? Well, I've seen this topic posted a few times in the last month or so and many of the response I've seen here haven't included definitive answers. Of course, the actual problems vary, but ultimately, a bunch of people want to do file upload from an applet or application to an existing file upload script (CGI, PHP, JSP, etc.) on a web server. And invariably, there are problems with formatting the HTTP request to get things working.
Well, I had a need to do the same thing. I realize there are other solutions out there, such as some sample code that comes with Jakarta Commons Upload. But since we all like reusable code, and we also all seem to like reinventing wheels, here's my go at it: MultiPartFormOutputStream!
MultiPartFormOutputStream is a specialized OutputStream-like class. You create your URLConnection to the server (a static method included can do this for a URL for you, as some of the settings, doInput and doOutput specifically, seem to confuse people). Then get the OutputStream from it and create a boundary string (a static method to create one is provided as well) and pass them to the constructor. Now you have a MultiPartFormOutputStream which you can use to write form fields like text fields, checkboxes, etc., as well as write file data (from Files, InputStreams or raw bytes).
There are some convenience methods for writing primative type values as well as strings, but any higher level objects (aside from Files or InputStreams) aren't supported. (You can always serialize and pass the raw bytes.)
Sample usage code is below. Also, any recommendations for improvement are requested. The code was tested with the Jakarta Struts.
import java.io.*;
import java.net.*;
* <code>MultiPartFormOutputStream</code> is used to write
* "multipart/form-data" to a <code>java.net.URLConnection</code> for
* POSTing. This is primarily for file uploading to HTTP servers.
* @since JDK1.3
public class MultiPartFormOutputStream {
 * The line end characters.
 private static final String NEWLINE = "\r\n";
 * The boundary prefix.
 private static final String PREFIX = "--";
 * The output stream to write to.
 private DataOutputStream out = null;
 * The multipart boundary string.
 private String boundary = null;
 * Creates a new <code>MultiPartFormOutputStream</code> object using
 * the specified output stream and boundary. The boundary is required
 * to be created before using this method, as described in the
 * description for the <code>getContentType(String)</code> method.
 * The boundary is only checked for <code>null</code> or empty string,
 * but it is recommended to be at least 6 characters. (Or use the
 * static createBoundary() method to create one.)
 * @param os the output stream
 * @param boundary the boundary
 * @see #createBoundary()
 * @see #getContentType(String)
 public MultiPartFormOutputStream(OutputStream os, String boundary) {
 if(os == null) {
 throw new IllegalArgumentException("Output stream is required.");
 if(boundary == null || boundary.length() == 0) {
 throw new IllegalArgumentException("Boundary stream is required.");
 this.out = new DataOutputStream(os);
 this.boundary = boundary;
 * Writes an boolean field value.
 * @param name the field name (required)
 * @param value the field value
 * @throws java.io.IOException on input/output errors
 public void writeField(String name, boolean value)
 throws java.io.IOException {
 writeField(name, new Boolean(value).toString());
 * Writes an double field value.
 * @param name the field name (required)
 * @param value the field value
 * @throws java.io.IOException on input/output errors
 public void writeField(String name, double value)
 throws java.io.IOException {
 writeField(name, Double.toString(value));
 * Writes an float field value.
 * @param name the field name (required)
 * @param value the field value
 * @throws java.io.IOException on input/output errors
 public void writeField(String name, float value)
 throws java.io.IOException {
 writeField(name, Float.toString(value));
 * Writes an long field value.
 * @param name the field name (required)
 * @param value the field value
 * @throws java.io.IOException on input/output errors
 public void writeField(String name, long value)
 throws java.io.IOException {
 writeField(name, Long.toString(value));
 * Writes an int field value.
 * @param name the field name (required)
 * @param value the field value
 * @throws java.io.IOException on input/output errors
 public void writeField(String name, int value)
 throws java.io.IOException {
 writeField(name, Integer.toString(value));
 * Writes an short field value.
 * @param name the field name (required)
 * @param value the field value
 * @throws java.io.IOException on input/output errors
 public void writeField(String name, short value)
 throws java.io.IOException {
 writeField(name, Short.toString(value));
 * Writes an char field value.
 * @param name the field name (required)
 * @param value the field value
 * @throws java.io.IOException on input/output errors
 public void writeField(String name, char value)
 throws java.io.IOException {
 writeField(name, new Character(value).toString());
 * Writes an string field value. If the value is null, an empty string
 * is sent ("").
 * @param name the field name (required)
 * @param value the field value
 * @throws java.io.IOException on input/output errors
 public void writeField(String name, String value)
 throws java.io.IOException {
 if(name == null) {
 throw new IllegalArgumentException("Name cannot be null or empty.");
 if(value == null) {
 value = "";
 --boundary\r\n
 Content-Disposition: form-data; name="<fieldName>"\r\n
 \r\n
 <value>\r\n
 // write boundary
 out.writeBytes(PREFIX);
 out.writeBytes(boundary);
 out.writeBytes(NEWLINE);
 // write content header
 out.writeBytes("Content-Disposition: form-data; name=\"" + name + "\"");
 out.writeBytes(NEWLINE);
 out.writeBytes(NEWLINE);
 // write content
 out.writeBytes(value);
 out.writeBytes(NEWLINE);
 out.flush();
 * Writes a file's contents. If the file is null, does not exists, or
 * is a directory, a <code>java.lang.IllegalArgumentException</code>
 * will be thrown.
 * @param name the field name
 * @param mimeType the file content type (optional, recommended)
 * @param file the file (the file must exist)
 * @throws java.io.IOException on input/output errors
 public void writeFile(String name, String mimeType, File file)
 throws java.io.IOException {
 if(file == null) {
 throw new IllegalArgumentException("File cannot be null.");
 if(!file.exists()) {
 throw new IllegalArgumentException("File does not exist.");
 if(file.isDirectory()) {
 throw new IllegalArgumentException("File cannot be a directory.");
 writeFile(name, mimeType, file.getCanonicalPath(), new FileInputStream(file));
 * Writes a input stream's contents. If the input stream is null, a
 * <code>java.lang.IllegalArgumentException</code> will be thrown.
 * @param name the field name
 * @param mimeType the file content type (optional, recommended)
 * @param fileName the file name (required)
 * @param is the input stream
 * @throws java.io.IOException on input/output errors
 public void writeFile(String name, String mimeType,
 String fileName, InputStream is)
 throws java.io.IOException {
 if(is == null) {
 throw new IllegalArgumentException("Input stream cannot be null.");
 if(fileName == null || fileName.length() == 0) {
 throw new IllegalArgumentException("File name cannot be null or empty.");
 --boundary\r\n
 Content-Disposition: form-data; name="<fieldName>"; filename="<filename>"\r\n
 Content-Type: <mime-type>\r\n
 \r\n
 <file-data>\r\n
 // write boundary
 out.writeBytes(PREFIX);
 out.writeBytes(boundary);
 out.writeBytes(NEWLINE);
 // write content header
 out.writeBytes("Content-Disposition: form-data; name=\"" + name +
 "\"; filename=\"" + fileName + "\"");
 out.writeBytes(NEWLINE);
 if(mimeType != null) {
 out.writeBytes("Content-Type: " + mimeType);
 out.writeBytes(NEWLINE);
 out.writeBytes(NEWLINE);
 // write content
 byte[] data = new byte[1024];
 int r = 0;
 while((r = is.read(data, 0, data.length)) != -1) {
 out.write(data, 0, r);
 // close input stream, but ignore any possible exception for it
 try {
 is.close();
 } catch(Exception e) {}
 out.writeBytes(NEWLINE);
 out.flush();
 * Writes the given bytes. The bytes are assumed to be the contents
 * of a file, and will be sent as such. If the data is null, a
 * <code>java.lang.IllegalArgumentException</code> will be thrown.
 * @param name the field name
 * @param mimeType the file content type (optional, recommended)
 * @param fileName the file name (required)
 * @param data the file data
 * @throws java.io.IOException on input/output errors
 public void writeFile(String name, String mimeType,
 String fileName, byte[] data)
 throws java.io.IOException {
 if(data == null) {
 throw new IllegalArgumentException("Data cannot be null.");
 if(fileName == null || fileName.length() == 0) {
 throw new IllegalArgumentException("File name cannot be null or empty.");
 --boundary\r\n
 Content-Disposition: form-data; name="<fieldName>"; filename="<filename>"\r\n
 Content-Type: <mime-type>\r\n
 \r\n
 <file-data>\r\n
 // write boundary
 out.writeBytes(PREFIX);
 out.writeBytes(boundary);
 out.writeBytes(NEWLINE);
 // write content header
 out.writeBytes("Content-Disposition: form-data; name=\"" + name +
 "\"; filename=\"" + fileName + "\"");
 out.writeBytes(NEWLINE);
 if(mimeType != null) {
 out.writeBytes("Content-Type: " + mimeType);
 out.writeBytes(NEWLINE);
 out.writeBytes(NEWLINE);
 // write content
 out.write(data, 0, data.length);
 out.writeBytes(NEWLINE);
 out.flush();
 * Flushes the stream. Actually, this method does nothing, as the only
 * write methods are highly specialized and automatically flush.
 * @throws java.io.IOException on input/output errors
 public void flush() throws java.io.IOException {
 // out.flush();
 * Closes the stream. 
 * 
 * NOTE: This method MUST be called to finalize the
 * multipart stream.
 * @throws java.io.IOException on input/output errors
 public void close() throws java.io.IOException {
 // write final boundary
 out.writeBytes(PREFIX);
 out.writeBytes(boundary);
 out.writeBytes(PREFIX);
 out.writeBytes(NEWLINE);
 out.flush();
 out.close();
 * Gets the multipart boundary string being used by this stream.
 * @return the boundary
 public String getBoundary() {
 return this.boundary;
 * Creates a new <code>java.net.URLConnection</code> object from the
 * specified <code>java.net.URL</code>. This is a convenience method
 * which will set the <code>doInput</code>, <code>doOutput</code>,
 * <code>useCaches</code> and <code>defaultUseCaches</code> fields to
 * the appropriate settings in the correct order.
 * @return a <code>java.net.URLConnection</code> object for the URL
 * @throws java.io.IOException on input/output errors
 public static URLConnection createConnection(URL url)
 throws java.io.IOException {
 URLConnection urlConn = url.openConnection();
 if(urlConn instanceof HttpURLConnection) {
 HttpURLConnection httpConn = (HttpURLConnection)urlConn;
 httpConn.setRequestMethod("POST");
 urlConn.setDoInput(true);
 urlConn.setDoOutput(true);
 urlConn.setUseCaches(false);
 urlConn.setDefaultUseCaches(false);
 return urlConn;
 * Creates a multipart boundary string by concatenating 20 hyphens (-)
 * and the hexadecimal (base-16) representation of the current time in
 * milliseconds.
 * @return a multipart boundary string
 * @see #getContentType(String)
 public static String createBoundary() {
 return "--------------------" +
 Long.toString(System.currentTimeMillis(), 16);
 * Gets the content type string suitable for the
 * <code>java.net.URLConnection</code> which includes the multipart
 * boundary string. 
 * 
 * This method is static because, due to the nature of the
 * <code>java.net.URLConnection</code> class, once the output stream
 * for the connection is acquired, it's too late to set the content
 * type (or any other request parameter). So one has to create a
 * multipart boundary string first before using this class, such as
 * with the <code>createBoundary()</code> method.
 * @param boundary the boundary string
 * @return the content type string
 * @see #createBoundary()
 public static String getContentType(String boundary) {
 return "multipart/form-data; boundary=" + boundary;
}Usage: (try/catch left out to shorten the post a bit)
URL url = new URL("http://www.domain.com/webems/upload.do");
// create a boundary string
String boundary = MultiPartFormOutputStream.createBoundary();
URLConnection urlConn = MultiPartFormOutputStream.createConnection(url);
urlConn.setRequestProperty("Accept", "*/*");
urlConn.setRequestProperty("Content-Type",
 MultiPartFormOutputStream.getContentType(boundary));
// set some other request headers...
urlConn.setRequestProperty("Connection", "Keep-Alive");
urlConn.setRequestProperty("Cache-Control", "no-cache");
// no need to connect cuz getOutputStream() does it
MultiPartFormOutputStream out =
 new MultiPartFormOutputStream(urlConn.getOutputStream(), boundary);
// write a text field element
out.writeField("myText", "text field text");
// upload a file
out.writeFile("myFile", "text/plain", new File("C:\\test.txt"));
// can also write bytes directly
//out.writeFile("myFile", "text/plain", "C:\\test.txt",
// "This is some file text.".getBytes("ASCII"));
out.close();
// read response from server
BufferedReader in = new BufferedReader(
 new InputStreamReader(urlConn.getInputStream()));
String line = "";
while((line = in.readLine()) != null) {
 System.out.println(line);
in.close();------
"Useful Code of the Day" is supplied by the person who posted this message. This code is not guaranteed by any warranty whatsoever. The code is free to use and modify as you see fit. The code was tested and worked for the author. If anyone else has some useful code, feel free to post it under this heading.

I have a weird problem here. I'm using the Java POST (slightly altered for my purposes) mechanism but the receiving script doesn't receive any form variables (neither files nor regular form fields). If I try using the same receiving script with a regular upload form, it works. Because I've been pulling my hair out, I even went so far as to analyze the ip-packets. I can see that the file is actually sent through the Java POST mecahnism. Anybody any ideas. Here's the ip-packet of the failing upload:
----- Hypertext Transfer Protocol -----
HTTP: POST /fotoxs/upload.cfm HTTP/1.1
HTTP: Connection: Keep-Alive
HTTP: Content-Type: multipart/form-data; boundary=-----------------------------fb2649be18
HTTP: User-Agent: Mozilla/4.7 [en] (WinNT; U)
HTTP: Accept-Language: en-us
HTTP: Accept-Encoding: gzip, deflate
HTTP: Accept: image/gif, image/jpeg, image/pjpeg, */*
HTTP: CACHE-CONTROL: no-cache
HTTP: Host: newmarc
HTTP: Content-Length: 15511
----- Hypertext Transfer Protocol -----
HTTP: -----------------------------fb2649be18
HTTP: Content-Disposition: form-data; name="uploadFile"; filename="out.jpg"
HTTP: Content-Type: image/jpeg
HTTP: Data
....[data packets]
The one that works (from the regular post) is as follows:
----- Hypertext Transfer Protocol -----
HTTP: POST /fotoxs/upload.cfm HTTP/1.1
HTTP: Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-gsarcade-launch, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
HTTP: Referer: http://localhost:8500/fotoxs/test.cfm
HTTP: Accept-Language: nl
HTTP: Content-Type: multipart/form-data; boundary=---------------------------7d41961f201c0
HTTP: Accept-Encoding: gzip, deflate
HTTP: User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
HTTP: Host: newmarc
HTTP: Content-Length: 59022
HTTP: Connection: Keep-Alive
HTTP: Cache-Control: no-cache
----- Hypertext Transfer Protocol -----
HTTP: -----------------------------7d41961f201c0
HTTP: Content-Disposition: form-data; name="FiletoUpload"; filename="D:\My Documents\My Pictures\fotomarc.jpg"
HTTP: Content-Type: image/pjpeg
HTTP: Data
----- Hypertext Transfer Protocol -----
HTTP: HTTP/1.1 100 Continue
HTTP: Server: Microsoft-IIS/5.0
HTTP: Date: Sun, 07 Mar 2004 17:14:41 GMT
....[data packets]
One detail worth mentioning is that I don't read a file from harddisk, I'm streaming it directly to the connection outputstream from an image compression utility. But I can see the data in the ip-packets, and even if that somehow didn't work right, it doesn't explaing the fact that the receiving scripts reports no form fields whatsoever.
Thanks,
Marc

How to preserve battery life ~ used to last all day, now it runs out by lunchtime

How to preserve battery life ~ used to last all day, now it runs out by lunchtime

I would advise updating to iOS 7. It might improve your battery and the bugs are worked out by now.
If not wanting to update because of the new look, here are some tips:
-Turn off bluetooth when not needed.
-Connect to wifi and turn off cellular data when possible.
-When not around wifi, turn wifi off.
-Keep your screen at around 50% brightness.
-Disbale certain apps or features in Settings<Privacy<Location Services if they are not necessary.
-Close out of apps in the multitasking bar.
-Enable airplane mode when you plan on not using your phone for a while.
Hopefully these tips help you. If your battery does eventually get too bad, you can get it changed out by apple. If youve had your device for under a year, you can take it into an Apple store and theyll give you a new phone in return. Have a good night and good luck!

MBR95 using one gig per day.

My router usage was 1 to 2 gig per day before the new MBR95. Now it is using one gig per day. The manual has firewall controls but the router does not.
What can I do?
My version is v5.0.4. Is there a better version?
CornHen

Thanks for the modem information. People with those might be interested in knowing they work with the Cradlepoint MBR95 and this is the kind of thing that a search will pick up.
1 GB a month is 34 MB a day, that’s pretty tough to do. You can eat that up from a couple websites with video ads. 10 GB/mo (341 MB/day) and 12 GB/mo (409 MB/day) is more realistic and pretty much the minimum for a private network with multiple network devices and multiple users sharing the data plan.

Used 30GB in 2 days?!!?!?

Similar Messages

Maybe you are looking for