User exit at MIGO transaction

Hi experts, I hope your doing well,
I am looking for an user exit in order to capture information at the good receipt level, for example at header text.
and also,other user exit to capture information at the batch level (in this case I would like to link any batch with a number).
Could you help me? in both cases in the MIGO transaction
Thanks in advance,
which of these?
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read From RESB and RKPF For Print List in MB26
MBCFC003 Maintenance of batch master data for goods movements
MBCFC004 Maintenance of batch specifications for goods movements
Ignacio

Hi
For batch level below are the exits
User Exits
Form CHARGE_VORSCHLAGEN
           Propose batch using CFC
          CUSTOMER-FUNCTION '010'
Form UMCHARGE_VORSCHLAGEN
           Propose transfer batch using CFC
          CUSTOMER-FUNCTION '010'
have tried the FM MIGO_CUST_FIELDS_GENERATE for own fields

Similar Messages

User exit for MIGO transaction

I'm checking for user exit in Migo transaction
what I want to do is when I enter the PO# and try to save all the details ,it must trigger a pop-up(customized transaction) thru USEREXIT.
Thanks in advance.

Hello Hema
These are the "old" customer-exits on ECC 5.0:
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
Regards
Uwe

Regarding the user exits in MIGO transaction

Hi experts,
I need to populate the vendor(LIFNR) value automatically during MIGO(Transfer posting is 411 k) transaction depends upon the material, plant, batch combination. I found user exit for this requirement. But I want to know how to populate the vendor value from user exit to transaction screen.Please help me .

Hi,
Try to develop this BADI:
MB_MIGO_BADI
In SE19 create implementation.
try to use method: LINE_MODIFY, if you would like populated vendor on line items.
Hope it helps.
Best regards,
Wojtek

User Exit for MIGO Save

Hi Gurus,
I am looking for user exit for MIGO transaction. User exit should be given after saving the material document & I need this document number for carrying out some updations.
regards,

Hi
You need to use the BAdi MB_DOCUMENT_BADI.
This BAdi has two methods
MB_DOCUMENT_BEFORE_UPDATE
MB_DOCUMENT_UPDATE
The method MB_DOCUMENT_BEFORE_UPDATE is called up before the FI document is created. This means that it is called up even if the program is terminated by an error during the subsequent processing. The update of data in separate tables should always be contained in function modules that are called up with the addition 'in update task'. This ensures that all the data is updated consistently.
The method MB_DOCUMENT_UPDATE is not carried out until update. This means that all updates are carried out immediately in their own tables and do not have to be contained in 'update task' in function modules. For performance reasons, you should not re-read the tables or carry out any time-consuming routines at this point.
You should always call up MB_DOCUMENT_BEFORE_UPDATE before MB_DOCUMENT_UPDATE, particularly if time is a critical factor when posting the material documents. The method MB_DOCUMENT_UPDATE is processed after the FI document numbers are called. As a result, no other FI documents can be posted until this document is completely updated.
hope this helps...
Thanks & Regards
Kishore

To find out appropriate user exit/ badi for transaction VT01n

Hi,
   I have the following requirement.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have to find out proper user exit / badi to do this.I have tried with many userexit but it won't work.
   Thanking in advance to give your suggestion in order to resolve it.
With regards,
Ajit.

Hi this code will enable you to find the user exit for any transaction . Just give the transaction as input
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
Just for your information the User exits available for VT01n are
MV56AINI            Initialization of transaction control for transportation
V56AFCCH            Shipment processing: Check function code allowed
V56AGTAR            User Exit for Filtering Shipping Unit Calculation
V56ARCHV            Customer-spec. checks for archiving shipments
V56ATKTX            Change the number of lines for text input in shipment
V56BMOD             Transportation processing: Field modification
V56DISTZ            Shipment Processing: Determine Distance
V56FCOPY            Shipment processing: Copy delivery data
V56FSTAT            Shipment processing: Activities when setting a status
V56L0001            Status of Shipments for a Delivery
V56LDELI            Read Delivery Data for Shipment Processing
V56LOCID            Shipment Processing: Determine Location Identification
V56MVT04            Extensions for Collective Processing of Shipments
V56SLDET            Shipment processing: Leg determination
V56TDLIF            Filter Delivery Items for Shipment
V56UCHCH            Shipment processing: Check whether changes were made
V56UCHCO            Check shipments are complete
V56UDLUP            Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UNUMB            Shipment number allocation
V56USTAT            User-individual definition of transportation planning status
V56USVDO            Update new objects for transport
V56USVDP            Preparation for updating new objects for transport?
Award points if helpful..
Thanks

How can we find the list of user exits for a transaction

hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadish

hi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen

Help on USER EXIT for MIGO

Hi friends,
Facing problem in USER EXIT for MIGO...
My requirement is...
I want to give a error message for good issue or it should not be posted in MIGO, if the Item OK check has not been made for all the available materials corresponding to Order no while posting goods issue.
the structure and field names are: GODYNPRO-DETAIL_TAKE
i.e., If the user omits to do the item-check for any materials while posting Good issue(after the Production order made),one popup(error) message will come/display b4 posting the document (by way to alert him).
If anyone have solution or worked on this previously...pls post ur example by reply or let me know which is the corresponding USER EXIT to include my coding part.
I've tried in MB_CF001 and MBCF0005 and its not working.
Pls do the needful at the earliest.
Thanks & regards
sankar.

Hi
I hv same req. did u found correct exit?
thanks

Find active user exit for a transaction code

Hi All,
Please help to find the active user exit for a transaction code.
for Ex. below is the list of user exits for package VA ( for creation of sales order and changing sales order). Let me know which user exit is active and which is not active.
Exit name Short text
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Thanks & Regards,
Sabu

Goto TADIR table give program id as R3TR ,Objec type as CMOD and execute.
You will get all active exits in system.
Exits related to SD may be in ZSD package.

User exit for MIGO - Change on Posting A/C Code Upon Saving.

Hi,
I have a requirement to to split the GR/IR clearing account during the posting of goods receipt in MIGO by filled in BSEG-HKONT with specify a/c code (hard coded).
I'm not able to find any user exit to change the value in BSEG-HKONT
while click on save.
Is there any suggestion on it?
Thanks.

Hi ,
Try with the following User Exits for MIGO.
MB_CF001 Customer Function Exit in the Case of Updating a Mat. D
MBCF0002 Customer function exit: Segment text in material doc. i
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREA
MBCF0011 Read from RESB and RKPF for print list in MB26
Thanks,
SVREDDY

User Exit for CAT5 Transaction

Hi,
Kindly help in getting the User Exits attached with transaction CAT5.
Thanks in Advance.
Regards,
Sapna

hello,
do not coppy the tcode into zreport. it is the biggest sin you able to do. if there is no explicit user exit look for BADI (put break point inside SXV_GET_CLIF_BY_NAME fm, execute tcode and u ll get all BADI related with CAT5) or you could use implicit user exits. there are spots in standard SAP code (each reports subroutine has them so you could add your custom code there), but you have to ensure that your code will not make any damage.
best regards,
dez_

User Exit For Co01 Transaction

Hi Friends,
When I create a production order in co01 Transition. Header Storage location should be filled based on order type. Please share user exit do the change storage location.
Regards,
Jyo
Moderator Message: Duplicate Post. Thread Locked
Edited by: kishan P on Oct 18, 2010 3:37 PM

Hi
Go to transaction CMOd and create a project there and activate it
then find the user exits there for transaction CO01.
you will find it there.
Or go to SE84 and look for enhancement there.
thanks
Lalit Gupta

I need user exit for md11 transaction

hi,
whenever planned order is created or changed i need to fill ztable with that fields.which exit is useful for this requirement.
regards,
sreenivas.

Hi Sreenivas,
Below are the user exits related to transaction MD11.
LMDR2001 User exits restr. profiles of opt. pur.ord.-based load bldg
LMDZU001 User exits in additional planning
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

How to create user exit for MIGO check "item OK" Field select/unselect?

Hi All,
I want to know User Exit for MIGO Screen. when I click check button it will be show "Item OK " Field select or not.
MIGO Screen post if Item ok field select both parent id and line id . otherwise it will be show error message?.
Can Please every one tell me how to do user exit for MIGO?
mail id: [email protected]
thanks,
S.Muthu,

Hi,
check the BADI <b>MB_MIGO_BADI</b> ( method: POST_DOCUMENT).
COMD enhancment <b>MBCF0005</b>
Regards

How to find user exit for the transaction PBAW

Dear Freinds
In Recruitment ....PBAW(Job Advertisements--when we execute the
transaction PBAW ...we can find create Advertisement... > here will create posting
in this screen i have to add a field Status . could you please let me know how
i can add.. Is there any user exit through which i can add a field or there is any way...
as it is standard..
regards
Vamsi.

Hello Vamsi,
This might be of help. It is a program to find user exits based on transaction codes. Just install it on your sandbox and see if it works for you.
http://www.erpgenie.com/abap/code/abap26.htm
KR,
Peter Linn

User-exit for MIGO, need change GKONT for CO

Good evening,
Dear friends, sorry for my english.
I have made user-exit for MIGO in GGB1 and put on it in SPRO.
I have HKONT=V3100* and corresponding HKONT=1551*( OBYC, group WRX).
Then i run MIGO and make Purchase Order.
In my user exit, if HKONT of first position eq V3100, i must change corresponding HKONT from 1551 to V1551*.
When i make Order, i am run view documents: FI and other HKONTs changed successfully! ( first possition has V3100, second - V1551).
User-exit must work only with sy-tcode = MIGO or MIRO.
But CO documens NOT changed: HKONT(type of cost) eq V3100, but corr GKONT = 1551*...
I also try to use OPEN FI, but have the same picture... (in CO docs V3100* and 1551, but all another docs and FI too - V3100 and V1551*).
I see, that GKONT has only COEP. And this table a cannot see in user-exit.
I think, that FI doc must do CO doc,
but why in
View documents->RW-infodocs->documents CO = it is not change?
Please, answer me? if you can. regards.

Please, view Print-Screen of my problem:
<a href="http://rodendron.blogspot.com/2007/07/user-exit-for-migo.html">http://rodendron.blogspot.com/2007/07/user-exit-for-migo.html</a>
Anybody can help?

User exit at MIGO transaction

Similar Messages

Maybe you are looking for