User Exit for FCH5 for field PAYR-NNME1
Hi,
Please provide some user exits for Tcode FCH5 for field PAYR-ZNME1 so that user cannot modify
customer information in existing checks.
Thks & Regds
Shailesh
Hi,
check below userexists for Tcode FCH5.
Exit Name Description
FDTAX001 Enhancement to Transaction FDTA (event after the download)
FEDI0002 Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003 Function exits for EDI docs in FI - Save PEXR segments
FEDI0004 Function exits for EDI docs in FI - particular events
FEDI0006 Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003 Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041 Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042 Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043 Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061 Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062 Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063 Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064 Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065 Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066 Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071 Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072 Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073 Frame for user exit RFFOX073 (in program RFFOCH_U)
RFFOX074 Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075 Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081 Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082 Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100 Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101 Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102 Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103 Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104 user exit
RFFOX105 Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200 Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210 Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211 Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230 General program for user exit RFFOX230 (in program RFF
RFFOX240 Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250 Enhancement for User Exit 250 (RFFODK_E)
RFFOX901 Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902 Framework for user exit RFFOX902 (in program RFFOM100)
Thanks
Similar Messages
-
Hi,
I need a user exit or Badi for defaulting Plant at line item level.
The scenario goes like this: when ever user tries to change an existing Purchase order and tries to add a new line item in it, I need to trigger USEREXIT or BADI , so that it reads the previous line Plant and updates the current line with the same plant.
I tried with user exit MM06E005 but it didnt seem to work.
Can any one please help me?
I am new to BADI, so I am not sure how to find the BADI and use it. It would be great if anyone can help me i this.
Thanks
RamyaHello
The BAdI ME_PROCESS_PO_CUST is the right one. The method PROCESS_ITEM should be triggered whenever the user changes something in the purchase order at item level and executes any kind of function (e.g. ENTER, CHECK or SAVE).
However, instead of overwriting the user input via the BAdI you should implement method CHECK ( Closing Check ) where you can validate the user input. If any of your validation fails you can send an error message and set CHANGING parameter CH_FAILED = 'X'. This approach is much more transparent for the user.
NOTE: In order to "send" an error message you need to add the include mm_messages_mac to your implementing class. For an example see class CL_EXM_IM_ME_PROCESS_PO_CUST (should be available on ERP 6.0):
METHOD if_ex_me_process_po_cust~process_item .
DATA: ls_mepoitem TYPE mepoitem,
ls_customer TYPE mepo_badi_exampl,
ls_tbsg TYPE tbsg.
INCLUDE mm_messages_mac. "useful macros for message handling
* here we check customers data
ls_mepoitem = im_item->get_data( ).
IF ls_mepoitem-loekz EQ 'D'.
* check field badi_afnam
IF ls_customer-badi_afnam IS INITIAL.
mmpur_metafield mmmfd_cust_02.
mmpur_message_forced 'W' 'ME' '083' text-003 '' '' ''.
ENDIF.
ENDIF.
ENDMETHOD. "IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM
Regards
Uwe -
User exit or BADI for recruitment
Hi,
I am new to HCM, can you give me user exit or badi for recruitment.
Requirement - i have developed an infotype which i am updating through BSP, while the custom infotype is updated it should simultaneously update some of my Z tables. Hoping for positve replies earliest.
Thanks in advance:-
SantoshHi,
<b>Infotype</b>The data fields of HR master data, time management and recruitment are grouped logically into information types or infotypes for short.
Examples of infotypes are "Family/Related Person", "Organizational Assignment, "Basic Pay".
The following naming conventions apply to infotypes:
Infotypes 0000 to 0999 are used for HR master data
and sometimes for applicant data
Infotypes 1000 - 1999 for organizational management
Infotypes 2000 - 2999 for time data
Infotypes 4000 - 4999 for applicant data
Infotypes 9000 - 9999 for customers
<b>Function character of step</b>
This controls for which types of processing (create, change and/or delete a data record) a dynamic action should be carried out.
The processing type is indicated by a two-digit numeric value. These values can be added up; in other words, you can enter several processing types for each infotype, subtype or field. A dynamic action can also be carried out independent of the current processing type.
00 for Independent of the current function carried out
02 for Change
04 for Create
06 for Change and create
08 for Delete
10 for Change and delete
12 for Create and delete
Examples
If you enter 06, an action is carried out if the specified infotype was created or changed.
If you enter 00, an action is carried out irrespective of whether the specified infotype was created, changed or deleted.
<b>Variable function part</b>
The variable function part, which depends on the indicator for step, can have the following meaning:
<b>P - Plausibility checks</b>
You can enter values for specific infotype fields. Field names must be entered in full. Literals and constants can serve as comparison values. These must be enclosed by inverted commas. Variables can also be used.
The old value of a field can be used for comparison; the field name must be preceded by PSAVE-.
If fields of other infotypes are used for comparison, these must be stored in the module pool of the current infotype.
The following comparison operators are supported:
= equal to,
< less than,
<= less than or equal to,
> greater than
>= greater than or equal to and
<> not equal to.
Consecutive checks must be linked by a logical AND. Logical OR links must also be indicated by a /X.
Note:
Note that all checks with OR links must have a /X.
If the result of the comparison operation is not "true", then the following commands (I, F, W etc.) are skipped over until a field is reached or a new comparison operation takes place.
Examples
Infotype Field ..... Ind. Variable function part
0007 STAT3 P P0007-STAT3='0'
0007 STAT3 P PSAVE-STAT3='1'
The step is taken if the value in the P0007-STAT3 field changes from 1 to 0.
0007 P P0013-KLKZ1<>'0'/X
0007 P P0013-ALVKZ<>'0'/X
0007 P P0013-RVKZ1<>'0'/X
0007 P P0013-RVNUM=SPACE
The first three conditions are linked by an OR; at least one of these conditions must be met. Condition 4 must always be met.
The step is taken if the following holds true:
P0013-KVKZ1 not equal to 0 or P0013-ALVKZ not equal to 0 or P0013-RVKZ1 not equal to 0, and P0013-RVNUM empty.
<b>I - Maintain infotype record</b>
Enter the step, infotype, subtype, object ID, start and end dates of the record and an indicator which defines whether the step is to be run in the background. The possible actions are INS, COP, MOD, and DEL.
Use commas to separate selection criteria just like the separator in the matchcode. If an entry is missing, the system inserts a comma.
Separate the indicator for suppressing dialog from other entries by a slash D (/D).
Constants, such as those for subtypes, are not enclosed in inverted commas.
Variable entries are also permitted. Fields containing such values must be put in brackets.
Examples:
Infotype Field .... Ind. Variable function part
.... I INS,19,01/D
Step: Create a Dates record, subtype 01, run in the background
.... I DEL,14,M559
Step: Delete Rec. Payments/Deds. record with subtype (wage type) M559.
0007 .... I INS,8,,,(P0007-BEGDA),(P0007-ENDDA)
Step: Create a Basic Pay record (0008) without subtype and object ID. The start and end dates are the same as those in the current Planned Working Time record (0007); specify these two fields only if they are filled because the dynamic action was triggered by this infotype.
<b>W - Default values for new record</b>
Literals or variables are used as default values.
Set the defaults for the infotype, subtype, object ID, start and end dates using an I step and not a W step.
Do not set defaults for Q fields of an infotype because the values for these fields are derived from the corresponding P fields.
Examples
Infotype Subtype ..... FC Ind. Variable function part
0021 2 04 I INS,0015,M430
0021 2 04 W P0015-BETRG='10000'
When a Family/Related Person record (0021) record with subtype 2 (child) is created, an Additional Payments record (0015) with a default amount of 100.00 is created.
<b>V - Cross-reference to another step</b>
Here, you can combine fields to groups. The variable function part contains the value in the field which follows the "field" column. Steps which are specified only for the following field are also triggered for each of the other fields.
Examples
Infotype Field ..... FC Ind. Variable function part
0016 PRBZH 06 V PRBZT
0016 PRBZT 06 I DEL,0019,01/D
Infotype 0019, subtype 01 is deleted in the background when the field PRBZT or PRBZH in infotype 0016 is changed or created (function code 06).
The following entries are equivalent:
0016 PRBZH 06 I DEL,0019,01/D
0016 PRBZT 06 I DEL,0019,01/D
<b>F - Call a routine</b>
You can call internal (module pool) as well as external routines.
If you call external routines, type the program name in brackets after the routine name. Do not specify 'using' parameters. When calling an external routine, all data must be declared in a common part. You can use the fields of structure RP50D to return values from the routine. These are not used in the standard system and can only be populated via the routine and then can be used for defaults (W-Commands).
This allows customer-specific routines to be formulated with all the above steps.
Example 1:
Infotype Field ..... Ind. Var.function part
0016 PRBZT F PROBATION
0016 PRBZT I INS,19,01
0016 PRBZT W P0019-VTRMN=PRBEND
Module pool MP001600 contains the PROBATION routine. This routine uses the entries in the fields P0016-PRBZT and P0016-PRBEH to determine the end of the probation period which it stores in the field PRBEND.
The system creates a new 'Dates' record with the reminder date = PRBEND.
Example 2:
Infotyp ..... Ind. Var. function part
0001 F GET_DATE(ZPUDYN01)
0001 I INS,19,01
0001 W P0019-VTRMN=RP50D-DATE1
The GET_DATE routine in program ZPUDYN01 calculates a date and enters this date in the RP50D-DATE1 field via "TABLES RP50D" in ZPUDYN01. This date can be user-defined in GET_DATE: if necessary, user-defined infotypes can be read afterwards.
<b>M - Send a mail</b>
Enter the name of the feature which defines the characteristics of the mail.
Example
Infotype Field ..... Ind. Var.function part
0001 SACHP M M0001
A mail is sent when the field SACHP is changed. The characteristics of the mail are defined in feature M0001.
In the standard system, feature M0001 is provided as a model. The documentation on feature M0001 explains how to define the characteristics of a mail.
<b>ADDITIONAL HINTS</b>
If you use a date as a constant, enter it as YYYYMMDD (YYYY=year, MM=month, DD=day).
The table strings T001P, T503 and PSPAR are filled with the values which are valid on the record start date.
The old values of the infotype are stored in the field string PSAVE. The structure of this string is the same as the Pnnnn structure (nnnn=infotype). The structure is filled with (valid) values only when the delete, change and create functions are used.
Please read Create dynamic actions in the Implementation Guide.
Regards
Bernd -
User Exit or BADI for COR1/COR2
Dear Experts,
Can you please tell me if we have any user-exit or BADI for chaning the value of the technical completion date field
i.e. AUFK-IDAT2 while saving the Process Order in COR1 or COR2?
Thanks,
PraveenHi Praveen,
Implement the customer exit EXIT_SAPLCOKO_006 in enhancement
PPCO0020 Process order: Display/change order header data
This is only importing one field I_AUFNR.
but try the logic below.
data: lv_fnam type char16 value '(SAPLCOKO)caufvd'.
field-symbols : <fs_caufvd> type caufvd.
your checks for changing the field IDAT2 (Technical completion date).
Try to change <fs_caufvd>-IDAT2 field value.
Regards,
Dwarakanath.S -
User Exit Or Badi for Framework Release PO
Anyone could tell me about any user exit or BADI for storing the calculated value in Frameork order.
Since it is storing the GNETW in CEKKO and that is used in releasing procedure.
First of all i want to calculate the total price according to srat date and end date and then only for framework order put that value in CEKKO-KTWRT field.
Please Help and suggest some thing about this.
Thanks & Regards,
Nitin MalhotraHi,
Check the following PDF .
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
May be useful to you.
Regards
Sachin -
User Exit / Badi / BTE for Asset creation A ?
Hi Experts,
I need User Exit / BADI / BTE for asset Creation.
After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
i have tried all this.But no one is triggering after saving the As01 transaction.
Exit Name Description
AAPM0001 Integration of asset accounting and plant maintenance
AFAR0003 External changeover method
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
AIST0001 Exchange number range in master data maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
TRAN0001 User exit for asset transfer
Please suggest if anybody worked on this.
regards,
ImranHi,
Check out the following posts pertaining to similar topic.
Change Asset Workflow
Asset Management WORKFLOW
Regards
Sreekanth -
User Exits or BADI for Tcode ME51N
Hi All,
My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
Is there any user exit or Badi for this requirement. Kindly send me.
Regards,
ParasHi Paras,
Copy this program and execute. Will get all list of existin g Exits and Badis.
very useful program
Below code will give a list of BADIs for particular transaction.
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Reward points if this helps.
hema. -
Need User exit or BAdi for VF01
Hi.
I need User exit or Badi for VF01.
Condtion: After Successful Save of document number in database.
Please help me.
To be reward all helpfull answers.
Regards.
JayHi
The follwing user exits and badis available:
Enhancement
V05N0001
User Exits for Printing Billing Docs. using POR Procedure
V05I0001
User exits for billing index
SDVFX011
Userexit for the komkcv- and kompcv-structures
SDVFX010
User exit item table for the customer lines
SDVFX009
Billing doc. processing KIDONO (payment reference number)
SDVFX008
User exit: Processing of transfer structures SD-FI
SDVFX007
User exit: Billing plan during transfer to Accounting
V61A0001
Customer enhancement: Pricing
V60P0001
Data provision for additional fields for display in lists
V60A0001
Customer functions in the billing document
Business Add-in SD_CIN_LV60AU02
BADI for billing
VOR_WA_FAKTURA
Billing before Goods Issue
If it is helpful rewards points.
Regards
Pratap.M -
User Exits or BAdis' for the Service Order create Transaction
Hi all,
I need to Replace a field, "Product" in the "Item Details" area of the create Service Order Transaction(CRMD_BUS2000116) with some custom field.
Are there any Exits/BAdi which will help me in doing this..
Thanks in advance
SethuHi Sethu,
The user exits / BADI's for the Transaction(CRMD_BUS2000116 are not avaliable:
The following info from one forum to search user exits / BADI's that you can use: There are multiple ways of searching for BADI.
<b>Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).</b>
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.
Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
<b>Go to TCode: SE84->Enhancements->Business Add-inns->Definition</b>
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Also have a look at below report which will list BADIs.
REPORT Z_FIND_USER_EXITS.
TABLES : TSTC,TADIR,MODSAPT,MODACT,TRDIR,TFDIR,ENLFDIR,SXS_ATTRT ,TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Hope it will help you.
Regards,
Arjun
<b>Reward points if it helps</b> -
Hello Experts,
I want to put a check on material code while forming the composition for recipe in transaction RMWB. I am entering the material uner the input and output tab. Can anyone please tell the available user exits or BADI for this. I checked few, however, the material no. is not getting captured.
Thanks in advance.
Regards,
SonalHello Sonal,
You can make use of field symbol to read the value of a variable in BADI.Press F1 on field and read the program name and screen field name of a variable and the use below things in the BADI code.
Field-symbol <fs> type any.
ASSIGN ('(program name)variable name') TO <fs>.
IF sy-subrc EQ 0 AND <fs> IS ASSIGNED.
..you will get the variable value here in <fs>
ENDIF.
Thanks,
Pawan -
User exit or badi for this functionality
hi to all experts ,
i need user exit or badi for implementing a customized check to ensure appropriate incoterms is being maintained in PO document . they are maintaining two different incoterms maintained for the same vendor depending on the plant.
thanks in advancehi,
please give the information about
which transaction??
which field??
i think u need only validation, if check is not present u need to throw error or info mess, right..
regards
vijay -
User exit or badi for transaction IW32
Hi all,
I am searching for user exit or badi for Transaction IW32 but not finding as per my requirement.here in transaction IW32 if field system status(STTXT) key value is 'Released', all line item components should get displayed in display mode.it should not allow to edit or change line item components.can anyone give user exit or BADI to achieve this.
Thanks in advance.
Regards,
HarshadaHi,
Try to use this exit:
Enhancement EXIT_SAPLBSVA_001 STATTEXT Modification exit for formatting status text lines
Sample code:
IF ( sy-tcode = 'IW32') .
DATA: lv_str1 TYPE string.
FIELD-SYMBOLS : <fs_qmart> TYPE ANY.
lv_str1 = '(SAPLIQS0)VIQMEL-objnr'.
ASSIGN (lv_str1) TO <fs_objnr>.
SELECT SINGLE inact INTO lv_inact FROM jest WHERE objnr = viqmel-objnr
AND stat = c_stat
AND inact = space.
IF sy-subrc = 0.
LOOP AT SCREEN.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
Alternativ badi:
BADI SAPLIQS0 IQS0_STATUS_MAINTAIN Control of Changeability of User Status
I hope this may helpfull.
Thanks,
AMS -
User Exit in VF01 for Tax Conditions
Hello,
Please inform if any user exit is available for processing Conditions (Tax) in a Sales Order.
I'm facing a problem that while Invoicing, a certain Tax condition is not being executed.
Thanks,
Shalabh JainHI Colleague,
I will list the available user-exit to be used for Billing Document:
User Exits For Billing
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified in the billing type table and can be changed in this user exit. This user exit is only called when the billing documents is created.
USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMKCV (header fields).
USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMPCV (item fields).
USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
Depending on the number range, table TVFKD is used to set the billing date (country-specific requirments in Italy). USEREXIT_NUMBER_RANGE is automatically deactivated when this user exit is being applied.
USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created. It is used to provide the header and the item of the new billing document with deviating or additional data.
USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)
Printing the item line of a billing document can be supplemented or changed.
USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Printing the header line of a billing document can be supplemented or changed.
User exits in program RV60AFZD
Short descriptions of the user exits are contained in the program:
USEREXIT_RELI_XVBPAK_AVBPAK
USEREXIT_NEWROLE_XVBPAK_AVBPAK
USEREXIT_NEWROLE_XVBPAP_AVBPAK
The following user exits are available in report SAPLV60B for transfer to accounting (function group V60B):
EXIT_SAPLV60B_001: Change the header data in the structure acchd
You can use this exit to influence the header information of the accounting document. For example, you can change the business transaction, "created on" date and time, the name of the person who created it or the transaction with which the document was created.
EXIT_SAPLV60B_002: Change the customer line ACCIT
You can use this exit to change the customer line in the accounting document. This exit is processed once the ACCIT structure is filled in with data from document header VBRK.
EXIT_SAPLV60B_003: Change the customer line in costing
The customer line is filled in differently for costing. You can use exit 003 to influence the ACCIT structure.
EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add information to a GL account item (such as quantity specifications) with this exit.
EXIT_SAPLV60B_005: User exit for accruals
Once all relevant data for accruals was entered in the GL account item, you can add to this data with this exit.
EXIT_SAPLV60B_006: Change the control line ACCIT
You can use exit 006 to add information to the control line.
EXIT_SAPLV60B_007: Change the installment plan
You can use exit 007 to add information to the installment plan
parameters in the GL account item.
EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and ACCHD
After the accounting document is filled in with data, you can use exit 008 to change the document once again.
EXIT_SAPLV60B_010: Item table for customer lines
You can use exit 10 to influence the contents of customer lines before they are created.
EXIT_SAPLV60B_0011: Change the parameter for cash account determination or reconciliation account determination
You can use this exit to change inbound parameters in order to influence account determination.
I hope that one of them could be helpful.
Regards
Ruy Castro -
Hi
Does somebody knows some user exit or BADI for add validations to FB02 when user changes some position data.
I need to validate some header BKPF (Company, Currency) and detail BSEG (Posting Key, Account Bank) data when change the position.
Does somebody knows one user exit or Badi wich i can use to do it ?
Thanks
FrankThanks for your answers.
I need to make validations for send error messages and i can not use FI Validations and Sustitutions because i send several differents messages and wuold need N steps (one step for each message).
The enhancement points called in CHANGE_TO_MODIFY are executed when ok-code is 'CHAE' that is when the user calls FB03 and then change to modify mode for make changes like if he goes to FB02 , but these enhancements are no executed any more when the data changes are made and user press save.
I already found some enhancement executed just before data saving (it's in FORM belegsummen_pruefen) so i make the validation and send the error message , but when error message appears the screen get protected so the user can not change any screen field for make the data corrections.
Best Regards
Frank -
User exit or BADI for standard change Log ?
Is there user exit or BADI for standard change log update ?
I want to update a customer fields into standard change log table.
Could someone tell me about it?Could anbody tell me ?
Maybe you are looking for
-
Badi ----FDM_COLL_SEND_ITEMS
Hi friends, I have got this Badi for performing Implementation with the below requirement for one of my Object . Can any one tell me what needs to be done to get this functionality. You use this Business Add-In (BAdI) in the component SAP Collections
-
Hello: How do we rename the attachement's that were scheduled to have the sysdate as the name of the attachment? Thanks Chandu,
-
Server Server 2014 Reporting Services Redistributable
Why has a 2014 Reporting Services Redistributable not been published? I have seen multiple references saying that the Reporting Services report viewer did not change between 2012 and 2014. If that is the case then why do I see a 12.0.2000.8 version o
-
Hi Experts, I want to archive messages in PI. Currently, all the messages are marked for deletion. To change the delete flag to archive flag, I execute SAP standard program RSXMB_DEL_TO_ARCH. When I execute this program and filter the value for parti
-
I've Lost My Original Mac OS X v. 10.4 Disks - But Need To Reinstall --
Greetings, I have misplaced my original OS X (Tiger 10.4) install disks that came with my Power Mac G5. Now I'm having a "kernel panic" where this gray window pops up and freezes the computer, and asks me to restart by pressing the power button. I've