User exit for invoice cockpit (tcode /cockpit/1)
Hi everybady,
Could you please hepl us on this issue.
I need to add a check when updating invoice cocpit document (via tcode /cockpit/1), i used exit FM via tcode /cockpit/C1 but nothing hapened.
Any replay will be appreciated.
Thanks.
Toubkal
Hi Alok,
Try this functional module CONVERT_TO_LOCAL_CURRENCY.
and user exit
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
regards,
Vishal
Similar Messages
-
User exit for Invoice verification
Hi
We want to findout user exit for invoice verification/MIRO . Is there any user exits available for MIRO.The below are for MIRO
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maint
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
regards
Aravind
Assign points if useful -
User exit for Invoice plan settlement
Hi
Can any tell me the user User exit for Invoice plan settlement to display PO# on the check?
All your efforts are appreciated.
Thanksref link below
http://www.easymarketplace.de/userexit.php
http://www.planetsap.com/userexit_main_page.htm -
User-exit for report RPCAIDP0 (tcode: PC00_M19_CAID)
Dear Gurus,
Does anyone know user-exits for report RPCAIDP0 (tcode: PC00_M19_CAID) ?
Thank you in advance,
PSCDepends on what you want to do Priscilla, i have quite an experience with RPCAIDP0 report and it's not the easiest report to change the standard without copying to an customer report. Also, in the previous year, SAP changed the logic of the report quite a bit in order to have the same logic as in RPCIIDP0, so they created a class (CL_HR_PT_EMPLOYEE_TAX_DATA) in which they encapsulated all the data retrieval regarding payroll results, so it's not that dificult to enhance the class itself but it's a bit dificult to get the logic right away. I have done this for several clients, so if you can be more specific maybe i can help you.
Best regards. -
User Exits for Invoice creation ,cancellation and sales return
Hi Gurus,
Pl help me it's very urgent.
I did not find any user exit invoice creation so i wrote the following code in include program
MV60AF0B_BELEG_SICHERN.
This code is to update the Z*table while saving invoice ,cancellation and sales return.
The code modification is like below
FORM BELEG_SICHERN *
Buchen Fakturabelege *
FORM BELEG_SICHERN.
READ TABLE XVBRK INDEX 1.
IF SY-SUBRC NE 0.
CALL FUNCTION 'DEQUEUE_ALL'.
MESSAGE S032.
EXIT.
ENDIF.
IF SAMH_MOD = ON.
EXPORT XKOMFK TO MEMORY ID 'SDBILLDL'.
ENDIF.
DATA: CALC_TYPE.
IF REBATE_DETERMINED = 'Y'.
CALC_TYPE = 'A'.
ELSE.
CALC_TYPE = 'I'.
ENDIF.
*{ INSERT RD1K903017 1
Work Area*********************
data : wa_xvbrk type VBRKVB.
data : wa_xvbrp type vbrpvb.
data : wa_zmigo type zmigo.
data : wa_vbrp type vbrp.
Internal table Creation*******
DATA: BEGIN OF tab_XVBRP OCCURS 100.
INCLUDE STRUCTURE VBRPVB.
DATA: END OF tab_XVBRP.
data : begin of tab_vbeln occurs 10,
vbeln type vbrk-vbeln,
knumv type vbrk-knumv,
end of tab_vbeln.
data : tab_zmigo type table of zmigo.
data : tab_vbrp type table of vbrp.
*****Data declaration*************
data : v_no_of_inv type i.
data : v_vbeln_no(10) type n.
data : v_last_inv_no(10) type n.
data : v_first_inv_no(10) type c.
data : v_tot_qty type i.
data : v_frbnr type mkpf-frbnr.
*******Ranges*********************
ranges : r_vbeln for vbrk-vbeln.
*****Populating IT****************
tab_xvbrp[] = xvbrp[].
describe table xvbrk lines v_no_of_inv.
*} INSERT
CALL FUNCTION 'RV_INVOICE_DOCUMENT_ADD'
EXPORTING
VBSK_I = VBSK
WITH_POSTING = 'A'
PREISFINDUNGSART = CALC_TYPE
IMPORTING
VBSK_E = VBSK
TABLES
XKOMFK = XKOMFK
XTHEAD = XTHEAD
XVBFS = XVBFS
XVBSS = XVBSS
XVBRK = XVBRK
XVBRP = XVBRP
XVBPA = XVBPA
XKOMV = XKOMV.
*{ INSERT RD1K903017 2
data : v_count type i,v_fkimg type i .
data : v_no_of_records(10) type n.
wa_xvbrk = xvbrk.
********Selecting the last rec no from ZMIGO
select max( sr_no ) from zmigo into v_no_of_records.
*****If Distribution channel is not ZB*********
if wa_xvbrk-vtweg ne 'ZB' and ( wa_xvbrk-fkart = 'ZRIN' or wa_xvbrk-fkart = 'ZRTE' ).
if v_no_of_inv = 1. " Process only when there is one invoice
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
endloop.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
clear v_no_of_inv.
else. "When there are Split Invoices
v_last_inv_no = wa_xvbrk-vbeln.
v_vbeln_no = v_last_inv_no - v_no_of_inv + 1.
v_first_inv_no = v_vbeln_no.
sort tab_xvbrp by vbeln.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = v_vbeln_no. "wa_vbrp-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = v_vbeln_no.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
at end of vbeln.
v_vbeln_no = v_vbeln_no + 1.
endat.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
endloop.
endif. "End of first 2nd IF.
clear : v_no_of_inv, v_vbeln_no.
endif.
****************Sales return************************************
if wa_xvbrk-fkart = 'ZRRE' and wa_xvbrk-vtweg ne 'ZB'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '651'.
condense wa_xvbrk-xblnr.
wa_zmigo-reference = wa_xvbrk-xblnr.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg, v_frbnr.
endloop.
endif.
*******Invoice Cancellation*****************************
if wa_xvbrk-fkart = 'ZRS1' and wa_xvbrk-vtweg ne 'ZB'.
delete tab_xvbrp[] where shkzg eq 'X'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
condense wa_xvbrk-zuonr.
wa_zmigo-reference = wa_xvbrk-zuonr.
wa_zmigo-mtype = '602'.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg.
endloop.
endif.
clear : v_no_of_records.
*} INSERT
CALL FUNCTION 'STACK_RESET'.
R185D-DATALOSS = SPACE.
FOLGEAUFRUF102 = SPACE.
PERFORM SETPAR_INIT.
*{ INSERT RD1K903017 3
*} INSERT
LEAVE.
ENDFORM.
This program is working fine for single user but in production where no of people are creating the invoices from different places the data is not getting updated in table ZMIGO.
sometime populating with wrong data , partial data and sometimes no updation at all.
I have used the table locking system enqueue and dequeue FM's before n after updation but still the same
thing is happening.
What could be the reason.
Looking for help very urgent any other alternate option.Hi,
Go thru these..
Enhancement
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line (transfer to accounting)
SDVFX003 User exit: Cash clearing (transfer to accounting)
SDVFX004 User exit: G/L line (transfer to accounting)
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX006 User exit: Tax line (transfer to accounting)
SDVFX005 User exit: Reserves (transfer to accounting)
Business Add-in
SD_CIN_LV60AU02 BADI for billing
If it is helpful rewards points
Regards
Pratap.M -
Badi or user exit for allocation run (Tcode-J3AT) on save button
hi friends,
i m searching for the BADI or user exit for the Tcode J3AT on the save button press. if u know any badi or user exit for same pls let me know.
thanks and regards,
vicky.solved with the help of SAP note.
-
Hi All,
I have an requirement that when during creation of invoice i have to update some data's to ztables and during deletion of invoice i have to update some data's. Is it possible?
Is there any user exit for this scenario? Kindly give your idea's how to resolve this scenario.hi,
these r the exits updated during invoice creation.
Transaction Code - MIRO Enter Invoice
Enhancement/ Business Add-in Description
Enhancement
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE Business Add-In: Logistics Invoice Verification -
Any user exit for invoice cancellation VF11
Hi,
I tried all below exits.
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
No one is firing while cancelling invoice.I neeed cal invoice no and it's data for further calculations.hai Venkatesh,
I am Genaralising This For U.
It Is ver EASY Procees.
Just Go To SE84
Give The Program Name Or Package name In Which ME41 is present.
Then Click On Display.
Then Click On Enhancements.
Then U will Get USer Exits Aswell As BADI 's
IF Found helpful Reward.
Regards
Eshwar -
User exit for invoice list creation?
Hello!
We have some customers who have multiple ship to locations but the same payer and Bill to. For some ship to locations they want an invoice list and for the other locations, individual invoices only - their process of getting the invoices validated by the delivery locations varies from location to location, hence this request. Is there any possibility by way of a user exit or any other modification to prevent bills based on the partner function SH (via some entry in a designated field in the customer master of the SH) to not go on the invoice list even though the payer may have invoice list calendar populated in the master? i.e. the bill that creates for that particular ship to, does not get the field FKDAT_RL populated even though the Payer may have the invoice list calendar in it? For the SH which don't have this field populated, we want those bills to go on the invoice list.
Appreciate any guidance/help.
Many thanks.Hi Manoj, that's a very simple question. Before you save data, that record will not even exist in LFA1 table. so, you just need to check that table for the record. In case it doesn't exit, just give an error message.
inclue some code in the user exit. something like
if sy-tcode eq 'MK01'.
select single from lfa1 where lifnr eq ???-lifnr. "check field name in exit
if not sy-subrc eq 0. "record doesn't exist
message E 'Record ..........'
endif.
endif.
if you want to use authorization, just include a mandatory field in a field group, like name1 (vendor name, you can create a vendor without a name) and that will only be open for maintenance for those who have the corresponding authorization value. Therefore, those who have authorization to create a vendor can create it using XK01/MK01/FK01, but those who can only maintain purchasing data cannot create a new vendor record. -
User exit for me 51 to put field descryption for ekbn-sakpto in screen 505
hi .
i have a requirement to put field descryption in screen 505 for me51 tcode(program sapmm06b) for field g/l account in screen 505(Account Assignment for item 00010).
waiting for your resposne.
bye.
sita.Hi Seetaram,
Hi,
By using the below code you can find the User exits for a particular TCODE.Execute this program and the TCODE in selection screen.
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Reward if helpful,
phani -
User exit for revenue recognition VF44
Subject changed by moderator. Please use informative subject in future
I am trying to find a user exit for revenue recognition tcode : VF44. Can anybody help me in finding one. I have a program to find user exits. But it couldnt list any userexit or badi.
Can anybody shed light on this.
Best Regards.
Edited by: Matt on Jan 16, 2009 11:31 AMHi,
check following link
http://****************/Tutorials/ExitsBADIs/ExitsMain.htm
Regards,
Madhu -
Hi Experts,
My req, is I have to check billing date with order date/ delivery date while creating the invoice in VF01.
For that I have done codig in user exit RV60AFZZ, so it gives error ,but the billing date field get disable.
& this invoice no. alsp get created.
So can anybody plz tell me in which user exit i have to put my code ???
I have tried with RV60AFZC.But it is not working.
My code is
FORM userexit_pricing_prepare_tkomp.
* TKOMP-zzfield = xxxx-zzfield2.
* structure for vbak
TYPES:BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln,
audat TYPE vbak-audat,
END OF ty_vbak.
*likp structure
TYPES:BEGIN OF ty_likp,
vbeln TYPE likp-vbeln,
lfdat TYPE likp-lfdat,
END OF ty_likp.
*vbrp structure
TYPES:BEGIN OF ty_vbrp,
vgbel TYPE vbrp-vgbel,
vgpos TYPE vbrp-vgpos,
aubel TYPE vbrp-aubel,
aupos TYPE vbrp-aupos,
END OF ty_vbrp.
DATA:it_vbak TYPE STANDARD TABLE OF ty_vbak,
it_likp TYPE STANDARD TABLE OF ty_likp,
it_vbrp TYPE STANDARD TABLE OF ty_vbrp.
DATA:wa_vbak TYPE ty_vbak,
wa_likp TYPE ty_likp,
wa_vbrp TYPE ty_vbrp.
***** take reference document no & delivery no. *****
LOOP AT xvbrp.
wa_vbrp-vgbel = xvbrp-vgbel.
wa_vbrp-vgpos = xvbrp-vgpos.
wa_vbrp-aubel = xvbrp-aubel.
wa_vbrp-aupos = xvbrp-aupos.
APPEND wa_vbrp TO it_vbrp.
ENDLOOP.
IF it_vbrp IS NOT INITIAL.
SELECT vbeln audat FROM vbak
INTO TABLE it_vbak
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-aubel.
SELECT vbeln lfdat from likp
INTO TABLE it_likp
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel.
ENDIF.
**** check for invoice date with order date *****
LOOP AT it_vbak INTO wa_vbak.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_vbak-audat.
MESSAGE 'Invoice Date is less than Order Date' TYPE 'E'.
ENDIF.
ENDLOOP.
**** check for invoice date with delievery date *****
LOOP AT it_likp INTO wa_likp.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_likp-lfdat.
MESSAGE 'Invoice Date is less than Delivery Date' TYPE 'E'.
ENDIF.
ENDLOOP.
ENDFORM. "USEREXIT_PRICING_PREPARE_TKOMP
Thanks & Regards,
Anagha DeshmukhHello,
These are the user exits for the tcode.
J_3RSINV Export sales
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
Keep the break point and try in the debugging in each and every exit and see which user exit is triggred. -
User exit for tcode ME21N and ME22N
Hi everyone
Can anybody tell me the user exits found in the tcodes ME21N nad ME22N, when saving a PO?
Regards
AnjaliAMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Individual customer source determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MM06E011 Activate PReq Block
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
If useful reward.
Vasanth -
Hi guys.
is there any user exit fot T-code F-22 to avoid duplicate invoice?available use exits are
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not se
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI documen
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
and you can find user exits for any transaction with the help of this code
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Message was edited by: Vijay Kumar Reddy -
USER EXIT for TCODE ME51N,ME52N
Hi Expers,
I have one requirement, If you go to TCODE ME51n, ME52N, ME53N, we will get one ALV grid . So user will change the layout according to his intrests & will save that layout.
While saving that layout we will get 2 checkboxes
1>User specific
2>Default setting.
So here my requirement is to disable "default setting" check box, sice users are not allowed to set default setting because it affects other users.
Please help me to solve this issue & provide me user exit for the same
Regards,
SanthoshHi,
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting
LMELA010 Inbound shipping notification: Transfer item data from
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Rece
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition rel
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requi
M06E0004 Changes to communication structure for release purch. d
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., previe
MEFLD004 Determine earliest delivery date f. check w. GR (only P
MELAB001 Gen. forecast delivery schedules: Transfer schedule imp
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toler
MM06E001 User exits for EDI inbound and outbound purchasing docu
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
These are all the user exits you have in the ME Package. Identify the exit which is suitable to fulfill your requirement.
Maybe you are looking for
-
Error while searching production order
Hi All, I am using SAP B One 8.8 SP : 00 PL 16 at our client location. Whenever any used opens production order and tries to search added production order follwing error message is displayed. Error: " Invalid production bill of materials [Production
-
How can I create an IList Employee list based on my Employee class?
I'm trying to create an IList<Employee> list based on my Employee class (below). But this is erroring out. Is my employee class missing anything? How could I make this work? private void EmployeeList() IList<Employee> arL = new IList<Employee>();
-
Hi, This is my source code of uploading excel into sap and displaying the list.Please give the code for displaying the excel data in editable alv. <<The code came from [here|https://wiki.sdn.sap.com/wiki/display/Snippets/ABAP-UploaddatafromExceltoSa
-
Adding two 2-D Arrays to then save
I am trying to build two 2-D arrays to then save as a spreadsheet file. This process happens in while loop and I need to enable indexing when I feed the wire out. When I do this I use the build array fucntion but then it creates a 3-D array which I c
-
App V 5.0 Package size getting reduced
After creating AppV package when i edit the package to delete the junk file / junk registry, the package size is getting reduced. For E.g. My AppV package is having 200 files and 30 registry keys with size of 260 MB. When I edit the package -> delete