User exit for partner determination in delivery document

Hi,
Can some one suggest an user exit for partner determination in delivery document.
We have a scenario of excluding certain plants for few of the partner determinations in delivery document..
Please suggest
Regards
Ravikumar

Hello Ravikumar,
Please ceck if these userexits help
Normally there are 2 userexits available in function kopierte_partner_pruefen:
   - EXIT_SAPLV09A_003
   - EXIT_SAPLV09A_004
Regards,
Raghavendra YN

Similar Messages

  • Billing user exit for partner determination/substitution

    Hi ,
    For my SAP ERP , I need a Billing user exit for partner determination/substitution .
    If somebody has the info .
    Thank's

    Hi,
    User Exits For Billing:
    - USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
    The internal number range used in the standard system is specified
    in the billing type table and can be changed in this user exit. This
    user exit is only called when the billing documents is created.
    - USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
    In this user exit additional fields for account determination that
    are not provided in the standard system are copied into
    communication structure KOMKCV (header fields).
    - USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
    In this user exit additional fields for account determination that
    are not provided in the standard system are copied into
    communication structure KOMPCV (item fields).
    - USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
    Depending on the number range, table TVFKD is used to set the
    billing date (country-specific requirments in Italy).
    USEREXIT_NUMBER_RANGE is automatically deactivated when this user
    exit is being applied.
    - USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
    This user exit is only called when the billing document is created.
    It is used to provide the header and the item of the new billing
    document with deviating or additional data.
    - USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)
    Printing the item line of a billing document can be supplemented or changed.
    - USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
    Printing the header line of a billing document can be supplemented or changed.
    - User exits in program RV60AFZD
    Short descriptions of the user exits are contained in the program:
    - USEREXIT_RELI_XVBPAK_AVBPAK
    - USEREXIT_NEWROLE_XVBPAK_AVBPAK
    - USEREXIT_NEWROLE_XVBPAP_AVBPAK
    The following user exits are available in report SAPLV60B for transfer to accounting (function group V60B):
    - EXIT_SAPLV60B_001: Change the header data in the structure acchd
    You can use this exit to influence the header information of the accounting document. For example, you can change the business transaction, "created on" date and time, the name of the person who created it or the transaction with which the document was created.
    - EXIT_SAPLV60B_002: Change the customer line ACCIT
    You can use this exit to change the customer line in the accounting document. This exit is processed once the ACCIT structure is filled in with data from document header VBRK.
    - EXIT_SAPLV60B_003: Change the customer line in costing
    The customer line is filled in differently for costing. You can use exit 003 to influence the ACCIT structure.
    - EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add information to a GL account item (such as quantity specifications) with this exit.
    - EXIT_SAPLV60B_005: User exit for accruals
    Once all relevant data for accruals was entered in the GL account item, you can add to this data with this exit.
    - EXIT_SAPLV60B_006: Change the control line ACCIT
    You can use exit 006 to add information to the control line.
    - EXIT_SAPLV60B_007: Change the installment plan
    You can use exit 007 to add information to the installment plan parameters in the GL account item.
    - EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and ACCHD After the accounting document is filled in with data, you can use exit 008 to change the document once again.
    - EXIT_SAPLV60B_010: Item table for customer lines
    You can use exit 10 to influence the contents of customer lines before they are created.
    - EXIT_SAPLV60B_0011: Change the parameter for cash account determination or reconciliation account determination
    You can use this exit to change inbound parameters in order to influence account determination.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • User Exit for Partner Determination in VA01, VA02 transaction ( Sales order

    Dear All,
    I have an issue in which i need to determine partner for every change in ship to party both at header and item level during sales order creation or change.
    Can you please suggest an appropriate user exit for the same.
    I have tried
    EXIT_SAPLV09A_003
    EXIT_SAPLV09A_004
    but they get triggered only when we enter into VA01 transaction and not when the ship to party is manually changed.
    If possible i want to avoid MV45 exits as there are chances of regression due to too many different functionalities already present in my system.
    In worst case scenario please specify the place wherein i need to code in MV45 exits and what are the fields i need to change.
    Most probably i filtered out on "USEREXIT_MOVE_FIELD_TO_VBAP" but i am not 100 percent sure on this, please suggest.
    Thanks in advance
    Ronak

    Hi,
    please use User exit function: EXIT_SAPMV45A_003
    Put your coding in include: ZXVVAU05 (create it by double clicking, if not already created) and activate.
    Regards,
    Sanjay Gogikar

  • User Exit for Partner Determination

    Hello Experts,
    I have a requirement where if user manually adda a ZZ partner function to partner header in Sales document, then a ZX partner function should be automatically created.
    Is it possible to configure it through VOPA transaction?
    Or else which user exit I can use and how to use it? 
    Thanks,
    Swati

    Hi,
    As far as my understanding this not available,
    You can fetch it both partners from customer master, why u put it manually in sales order ???
    Kapil

  • User exits for route determination in Sales order & Deliver creation

    Hi Gurus,
    I need to do some change in the route determination for both sales order & Delivery creation.
    Can anyone suggest me which user exit I have to use.
    Appropriate answers will be awarded.

    Hi,
    You can use the following exit for route determination - EXIT_SAPL0VRF_001.
    The FM documentation is below. Check the functionality:
    "The customer exit can be used for customer-specific route determination or to modify the inbound data for the company's own route determination.
    The following data is transferred to support customer-specific route determination:
    I_VBAK current order header (for route determination in sales order)
    I_VBKD order business data (for route determination in sales order)
    I_VBAP current order item (for route determination in sales order)
    I_VBPA current sales partner
    I_LIKP current delivery header (for route determination in delivery)
    The following data can be modified and transferred back to the standard route determination or used for a specific route determination:
    C_ALAND Country of departure
    C_AZONE Departure zone
    C_LLAND Destination country
    C_LZONE Receiving zone
    C_VSBED Shipping condition
    C_TRAGR Transportation group
    C_GRULG Weight group
    C_FLAG_GEN_VT Flag: Route determination with generic shipping
    requirements/transportation group.
    C_FLAG_INCR_GRULG Flag: Increase weight group if no route
    If you want to use a standard route determination with different parameters, trigger the exception 'CONTINUE_WITH_STANDARD'.
    In the log table C_PROT, the log data from the customer-specific route determination can be transferred back. In this case, the log entries always refer to customer-specific messages. To add a message to the log table, the function module SD_ROUTE_DET_LOG can be used (see below).
    If a route is determined in the customer-specific route-determination, it can be transferred back in the E_ROUTE field. If no route was found, the exception 'NO_ROUTE_FOUND' is to be triggered."
    Thanks.

  • User Exit for Tax Determination

    Hi Friends,
    I am working on Purchase Order(PO) creation process and my client requirement is, if the vendor is based in UK and even delievery is going to abroad, system should call normal tax code instead of SAP standard (which is; sap considers it as export and apply customs duty).
    Anybody know about the User Exit in the Tax Code (Tax) determination process where I can change the Tax Code during runtime?
    Regards,
    Shabbar

    These are the user exits for the purchase order.
    V02V0001-Salesarea determination for stock transport order
    V02V0002-User exit for storage location determination
    V02V0003-User exit for gate + matl staging area determination (headr)
    V02V0004-User Exit for Staging Area Determination (Item) 
    V50PSTAT-Delivery: Item Status Calculation
    V50Q0001-Delivery Monitor: User Exits for Filling Display Fields
    V50R0001-Collective processing for delivery creation
    V50R0002-Collective processing for delivery creation
    V50R0004-Calculation of Stock for POs for Shipping Due Date List
    V50S0001-User Exits for Delivery Processing
    V53C0001-Rough workload calculation in time per item
    V53C0002-W&S: RWE enhancement - shipping material type/time slot
    V53W0001-User exits for creating picking waves
    VMDE0001-Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002-Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003-Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004-Shipping Interface: Message SDPACK (Packing, Inbound)
    Award poits if this was helpful.
    Thanks and regards.

  • User exit for FB60 after POSTING the Document.

    Hi,
    I have requirement with FB60 transaction where i have to display the error message to the user if the amount of the invoice is greater than some threshold value( this will be maintained in the custom table) to park the document .
    I have created project with enhancement SAPLF051 using the exit EXIT_SAPLF051_002 it is triggering only when parks the document .
    But my requirement is  i need an enhancement which trigger after user posts the document.
    Please help me...
    regards
    paveee.....

    Hi
    Following are the available user exits for fb60 transaction...
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not sen
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment)
    If you still not find appropriate exit, go for badi's...
    1)To search for a badi, go to se 24 display class cl_exithandler.
    2) double click on method get_instance,
    3) get a break point on case statement. execute and start the required transaction in new session.
    4)look for variable exit_name. It would show the available badi's.
    <b>Please do reward if useful</b>
    Regards
    Dinesh

  • User Exit for transferring text from delivery -Item note to Accounting doc.

    Hi Experts ,
    I need an user exit where I can transfer the delivery item text (item note )  from outbound deliver to accounting document when the post goods issue (PGI ) is done .
    Please suggest.
    Thanks in advance
    Tanveer Khan

    I have got the function Exit EXIT_SAPMM07M_001. Which resolves the purpose...Thanks for your time..

  • User exit for route determination in Stock trasnport order

    Hi All,
    Can somebody help me with a user exit that I can use for route determination in the Stock transport order.
    Kind Regards
    Chakradhar

    Exit to be used is   EXIT_SAPLEBND_002. Enhancement M06E0004.
    DATA it_ekpo TYPE LINE OF mmpur_bekpo .
    To have controls in system for Standard Cost Estimation under two conditions if SCE is not run then,
    1)      System will not allow creating Process Order (COR1).
    2)      System will not allow Post Goods Issue (VL02N).
    Till date we do not have any control of SCE while creating Stock Transport Order.
    Now we have another control for SCE, that is
    3)      Henceforth system will not allow creating STO (ME21N).
    IF sy-tcode = 'ME21N' OR sy-tcode = 'ME22N'.
      IF i_cekko-bsart = 'UB'.
        LOOP AT it_bekpo INTO it_ekpo.
          SELECT SINGLE mtart FROM mara INTO mara-mtart WHERE matnr = it_ekpo-matnr .
          IF mara-mtart = 'IFIG' OR mara-mtart = 'ISFG'.
            SELECT SINGLE * FROM mbew WHERE matnr EQ it_ekpo-matnr
                                                AND bwkey EQ it_ekpo-werks.
            IF mbew-vprsv = 'S'.
              SELECT SINGLE * FROM mbew WHERE matnr EQ it_ekpo-matnr
                                              AND bwkey EQ it_ekpo-werks.
              IF mbew-stprs > '0.00'.
                CONTINUE.
              ELSE.
                MESSAGE e004(zpp) WITH it_ekpo-matnr it_ekpo-werks.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDIF.
    Regards,
    Mallick

  • User exit  for MIGO  after the material document is created?

    hi  guys ,
    I have requirement like after the   material document was creted in migo  i need to call my new transcation. can any one please let me know how  i have to solve this ?
    Moderator Message: Unfortunately, this is not a training forum and we can teach all about Exits and Badi's. I suggest you take a classroom course..... or do some R&D first
    Edited by: kishan P on Nov 30, 2010 11:57 AM

    Hi
    U need to create a FM with UPDATE MODULE attribute checked: so you fm can be run in UPDATE TASK
    This fm has to have the same interface of the method of the BAID (or user-exit) or a parte of it, if you don't need to use all parameters of the interface.
    All code to schedule the job has to be placed in this fm: you can use the fm JOB_OPEN and JOB_CLOSE in order to scheule a job programmatically.
    Call this fm in the BADI, the call has to be in UPDATE TASK, in this way your porgram can start as soon as all updating processes are over
    Max

  • User exit for route determination in VA01

    Dear friends,
    I need a userexit for route determination whenever required delivery date is changed at the time of sales order creation VA01.
    Please reply ASAP.
    Thanks,
    --Sonal

    Hi,
    MV45AFZZ should solve the issue.
    Check the subroutines userexit_move_field_to_vbap and  userexit_save_document_prepare.
    Place a break point in all the subroutines and run VA01 and change the date. You can find the exact place where you can code.
    Thanks,
    Vinod.

  • User exit for partner tab on sales order

    Hi All,
    Is there any user exit available for partners tab on sales order which should trigger when ever user changes anything from that tab like add/change remove any of the partners.
    Thanks,
    Suman.

    Hi Guys,
    Any Updates.
    Thanks,
    Suman.

  • BADI/USER EXIT for MIGO while generating FI Documents.

    Hi Friends,
    In MIGO T.Code when posting the GR, we'll get the Material Documnent right, at the same time it will
    generate an Accounting Document in background and the same will update in  BKPF/BSEG Tables.
    Mine requirement is when ever the entries are updating into thr Finance tables, i need to manipulate the line items and the updated line items needs to be upadted to BSEG table.ERO.
    Is there any EXIT or BADI or Enhancement or any Enhancement Point while posting the entries to FI with transaction MIGO.
    Regards:
    Swamy Dikonda.

    Dear Saravaran,
    Thanks for the reply.
    This will not suits to us. The provided BADI will works upto Posting the material document in transaction MIGO and it will not considered for the FI level entries.
    Hope you could have understand mine requirement.
    The requirement of mine is:
    While doing the GR with ref to PO the material documnet will be posted and subsequently FI documnet  will be  generated in Background. While generating the FI document i need to manipulate the values for the G/L. So that the manipulated values will be flow into BKPF and BSEG tables.
    Thanks.
    Regards
    Swamy

  • User exit for automatic posting of accouting document

    Can anybody tell me the userexit. Which is called during automatic posting of accounting document during billing in ECC 6.0 environment.
    There is no SD data to findout by debug in my system.
    Regards,
    Chandra Kumar

    Valdiations used

  • User exit for billing

    Hi, what is the user exit for billing doc. I mean the inlcude program name.
    regards
    sachin

    Hi
    Refer below
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/18/f62c7dd435d1118b3f0060b03ca329/content.htm">User Exits For Billing</a>
    Billing user exit for partner determination/substitution

Maybe you are looking for