User exit for requested delivery date at SO header

Hi Experts,
Trying to find a user exit which can be used to calculate the default requested delivery date in the order header based on the current date and the lead-time in the route.
By default, In SO header, requested delivery date is system date.
On based some conditions, i need to add lead time in current date and finally this date should be populated instead of current date in requested delivery date field .
The RDD( requested delivery date ) determination should happen only for some order types and for some sales organization & Distribution Channel.
Thanks,
satendra pateria

Hi Ravi,
Thanks for input.
I neee one more favour on enhancement for automatically batch determination.
In SO item level, when one item is given and press Enter automatically Batch getting popualted.
I need to check Batch Expiry date and if it got expired then need to display a error message.
As of now i got one user exit EXIT_SAPMM07M_010.
And Batch validation should be happened only for some order types and some Sale Org + Distribution
channel.
Thanks,
satendra

Similar Messages

User Exit for Requested Delivery Date in Sales Order

Hi
Which user exit can be used to change Requested Delivery Date in Sales Order.
Scenario: Sales Document Type: OR has Lead Time: 7 days. System always proposes delivery date after 7 days. We need to change this Lead Time based on plant.
Thanks in advance for your support.
Regards
Uma

Hello,
try with USEREXIT_MOVE_FIELD_TO_VBEP or USEREXIT_SAVE_DOCUMENT_PREPARE, of program MV45AFZZ.
Hope to be useful.
Best regards,
Andrea

User exit for "Latest GR date"

Hi Experts,
Please can any one provide me user exit for "Latest GR date" field in PO item level to update the value with 180 days plus on the delevery date mentioned for PO item.
Thanks in advance.
Regards,
Vijay

Please check this answered link:
Common USER EXIT for ME21N,ME22N
Edited by: Afshad Irani on Jun 18, 2010 11:08 AM

User exit for updating delivery block of Sales order before Delivery

Hi Folks,
Need to have an user exit for updating Delivery Block indicator for a Sales order Before creating its delivery
I have got an exit in Program SAPMV45A
MV50AFZ1
FORM USEREXIT_REFRESH_DOCUMENT.
that hits before processing the delivery block fro delivery (Correct me if i m wrong with this )
Now i want now how to change the Delivery Block indicator of Sales order in that exit
any FM available ?
Thanks n regards
Sonal...

Hi ,
How did you solved this issue?
I am having similar scenario in which while pressing the save button delivery block should update if multiple schedule line exist.
Tried by two different approaches in various user exit without any success.
AFAIK we have two ways to achieve this functionality.
1) Count the no of rows in vbep. If greater than 1 then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
This is not correct. If there are two line items both with single schedule line . This case total no lines in vbep will 2 and above condition will true which is incorrect.
2) There is a indicator for multiple schedule line (VBAPD-EPMEH , xvbap-epmeh ) if it is check then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
If I write code in USEREXIT_SAVE_DOCUMENT_PREPARE.
Multiple schedule line indicator is not populate so can not use 2nd approach.
If I write code in USEREXIT_SAVE_DOCUMENT it of no use as vbak is updated before reaching this user exit.
If I write code in USEREXIT_MOVE_FIELD_TO_VBAK as this user exit is also called while pressing the enter key for this I have use
the condition of fcode but it also fails in some condition.
If fcode eq 'SICH'.
Read table xvbap with key epmeh = 'X'.
IF SY-SUBRC = 0.
VBAK-LIFSK = '03'.
Else.
VBAK-LIFSK = ' '.
Endif.
Endif.
Please help me to get the desired functionality working for all cases.
1) One line item with multiple schedule line
2) Two line item with multiple schedule line
3) One line item having one schedule line and second one having multiple
4)Two line item both with single schedule line.

USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT

Hi,
Pls advise any USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT.
Regards,

Hi,
There is another user exit for updating material document data Upon posting is MB_CF001
I hope this will fullfill you.
Prem

Screen /user exit for additional screen on sales order header

Hello sir's,
can anybody help me for this query---
Screen /user exit for additional screen on sales order header.
exit name.
Thanks in advance,
Vikram

Hi,
SAP has provided screen modification. This you can do on "Additional data B" screen at both header and line iteam level.
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 ( this is the screen exit at header ) or SAPMV45A 8459 ( this is the screen exit at item ) as user exits. There few more exits you will have to code to get this screen works. The are,
MV45AOZZ - PBO module of screen
MV45AIZZ - PAI module of screen
MV45ATZZ - Global data definition for user-exit.
Check this link for more info regarding user-exit in sales docs.
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/frameset.htm
We have alredy implemented this solution at line item level. Let me know if you have any question.
Regards,
RS

User exits for Sales Order Data

Hi,
May i ask if there's any user exit that will get data from Sales order like ex. the order qty and the net price and pass to SHP_OBDLV_SAVE_REPLICA like ex in the segment E1BPOBDLVITEMRFO of delivery note.
or get the commodity code (STAWN) from MatMas and pass also to SHP_OBDLV_SAVE_REPLiCA
Thanks in advance..
aileen

These are the user exits for VA01
V45E0001 Update the purchase order from the sales order
V45S0001 Update sales document from configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
Use this also USEREXIT_SAVE_DOCUMENT
Regards,
Shamma

User Exit for VA01 - Delivery Block

Dear Friends
I wanted to do a User Exit for VA01 which should set the Delivery Block = Credit Memo as default for a particular user.
Can anyone give me the solution.
REg
S.K.Raj

Hi Kamaraj,
First of all u have to find out the perticular exit for make the changes, after that take one field TBTKZ which is flag for decit /credit memo. Based on the condition that flag set as 'X'. If that flag set as 'X' then populate the data.
Here it ishow to find out the user exit.
execute the following report and enter the t-code VA01 it will display all the exits. then search them by seeing coments..
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
Hope this helps you..
Regards,
Kumar.

IDoc programming for Requested Delivery Date - Inbound ORDERS

Hi Folks,
I want to manipulate Requested Delivery Date on the Sales Order.
The Field for Req Del Date is RV45A-KETDAT.
But this value is stored in VBAK-VDATU.
When i am trying to modify this value using dxvbak structure, this value is getting populated correctly, but not updating in the table.
Look at the code snippet below.
if zedidc-sndprn = '0000902000'.
        IF ze1edk03-iddat = '002'.
          MOVE ze1edk03-datum TO zvbak-vdatu.             " Requested Delivery Date
           zvbak-vdatu = sy-datum + 7.
           BREAK-POINT.
           dxvbak = zvbak.
        ENDIF.
        endif.
What's wrong here??
Thanks,
Matt

Done

User exit for start-up date in transaction ib02

Hi all,
i need to change the start-up date in transaction ib02.
Is anyone know how to change it? Is there a user exit for this field?
thanks in advanced.
Dana.

Hi Check out following exits
PCSD0001            Applications development R/3 BOMS
PCSD0002            BOMs: Customer fields in item
PCSD0003            BOMs: Customer fields in header
PCSD0004            BOM comparison
PCSD0005            BOMs: component check for material items
PCSD0006            Mass changes user exit
PCSD0007            Check changes in STKO
PCSD0008            WBS BOM: Customer-specific explosion for creating
PCSD0009            Order/WBS BOM, determine URL page
PCSD0010            Order/WBS BOM, determine explosion date
PCSD0011            Knowledge-based order BOM, parallel update
PCSD0012            Customer - Mat. number/mat. number during material exchange
PCSD0013            Customer-specific processing of an explosion for BOM browser
Thanks
Sandeep
Reward if helpful

User exit for contract start date in sales order change mode.

24.10.2008
Hi Gurus,
I need to disable the 'contract start date' (VEDA-VBEGDAT) field in Contract data tab at header and item level. Can someone suggest a user exit for the same ???
Regards,
Udaynath

Dear Udyanath,
Please check these User exits with the help of ABAPer
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document
processing are listed below.
USEREXIT_FIELD_MODIFICATION
     This user exit can be used to modify the attributes of the screen
     fields.
     To do this, the screen fields are allocated to so-called
     modification groups 1 - 4 and can be edited together during a
     modification in ABAP. If a field has no field name, it cannot be
     allocated to a group.
     The usage of the field groups (modification group 1-4) is as
     follows:
-   Modification group 1:   Automatic modification with transaction
         MFAW
-   Modification group 2:   It contains 'LOO' for step loop fields
-   Modification group 3:   For modifications which depend on check tables or on other fixed information.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document
header level. It is described in the section "Transfer of the
customer master fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document
item level. It is described in the section "Copy customer master
fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of
the sales document schedule lines.
The user exit is called up at the end of the FORM routine
VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer
master fields into sales document".
The user exit is called up at the end of the FORM routine
VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali.

User Exit for VA41 Validity Date

Hi,
I am giving order type in VA41 Tcode and then Clicking on 'Create with Reference' .Then a Pop Up is getting generated. In this i am giving Contract created with validity date lessthan today's date(in Contract Tab).For Example i created a Contract xxxxxx with 'valid to' 9.12.2008. When I am giving this contract and clicking on 'Copy' button a Warning message is getting generated 'The sales document is only valid until 09.12.2008'. Now i have to change this into Error message instead of Warning Message.
i used User Exits mv45afzz,MV45AFZA,MV45AFZB. But the debugger is getting started only after Warning message got generated.Is there any User Exit for which debugger gets started when i give the Contract and then Click on 'Copy' button. Please Suggest.
Thanks
K Srinivas

Hi,
Create a file say breakpoint.txt file as follows:-
[FUNCTION]
Command=/H
Title=Debugger
Type=SystemCommand
Once you come to the screen of 'Create with reference' where you are giving the contract, from second session drag the above mentiuoned file to the session where you are running VA41, & drop it here. Now debugger has been activated. Proceed with debugging. This method you can use for any of the 'POP UPs'.
I hope this helps,
Regards
Raju Chitale

User Exit For Tagging Delivery To A Manual Shipment

Hi All,
We have a process in which we are creating a shipment manually and then we are trying to tag a delivery manually to that shipment. The requirement is that it should give an error for a particular type of delivery.
Please let me know if there are any exits for that.
Thanks,
Sharadendu

You should try to control it while transaction VA02 then. I think the user exit should be MV45AFZZ, u plz check in the list of user exits - SPRO-IMG- Sales and Distribution- System Modifications- User Exits and you will have all specific user exits used during various SD processes there.
And then u might want to issue a hard error when some one changes or tries to change the Delivery date- can use a message number according to the application(for ex if its sales then Message class is V1). And then get that message number and code included in the particular user exit.
Else u can have a screen variant defined for a specific users profile which will not allow any changes to the particular field. creta evariant using SHDO- select ur specific needs- assign this screen variant to the tarnsaction code may be VA02.
Regards
Sai

User exit for foreign trade data in domestic scenario

Hi,
i need to fetch some batch characteristics in foreign trade/ customs tab of delivery.
The user exit 'EXIT_SAPLV50E_003' is working fine for the export scenario.. i.e. when the likp-expkz (export indicator) is NON-Blank.
but the requirement now is to fetch the characteristic in Domestic scenario. in this scenario the likp-expkz (export indicator) will be BLANK. so it will not trigger this user exit.
Can you please tell me , which user exit i can use to get the data for 'foreign trade' in domestic scenario.

Hi,
i need to fetch some batch characteristics in foreign trade/ customs tab of delivery.
The user exit 'EXIT_SAPLV50E_003' is working fine for the export scenario.. i.e. when the likp-expkz (export indicator) is NON-Blank.
but the requirement now is to fetch the characteristic in Domestic scenario. in this scenario the likp-expkz (export indicator) will be BLANK. so it will not trigger this user exit.
Can you please tell me , which user exit i can use to get the data for 'foreign trade' in domestic scenario.

User exit for PO Item data update

Hello All,
At time of creation of PO using ME21N / ME58, we want to update PO item data . We want to update Over and Under delivery tolerances values from corressponding sales order rather than purchase info record.
Please let me know if anyone has worked on similar requirement or any pointers for relevant user exits in SAP Release 4.6C .
Regards,
Manu.

Hello ,
Would you please check the below Userexits in 4.6C .
EXIT_SAPLV50E_001
EXIT_SAPLV50E_002
EXIT_SAPLV50E_003
EXIT_SAPLV50E_004
EXIT_SAPLV50E_005
EXIT_SAPLV50E_006
In which I hope 2 and 4th were usefull.
Regards,

User exit for requested delivery date at SO header

Similar Messages

Maybe you are looking for