User Exits / BADIs triggered during the Material document creation

Hi Experts,
Can anybody tell me the User Exits / BADIs /Possibilities that can be triggered during the Material Document Creation which can be used to update the Equipment Master User Statuses.
Thanks,
Sangeeta.

Hey Sangeeta,
  Try these User Exit's
MGA00001  Material Master (Industry): Checks and Enhancements
MGA00002  Material Master (Industry): Number Assignment
MGA00003  Material Master (Industry and Retail): Number Display
Using Enhancement MGA00001 (Function Exit : EXIT_SAPLMGMU_001 ) you can validate & Change your Material Document Number.
Badi's
BADI_EAN_SYSTEMATIC
BADI_GTIN_VARIANT
BADI_MAT_F_SPEC_SEL
BADI_MATERIAL_CHECK
BADI_MATERIAL_OD
BADI_MATERIAL_OD
BADI_MATERIAL_REF
BADI_MATNR_CHECK_PVS
BADI_MM_MATNR
BADI_MM_MATNR
CDT_CHECK_MATERIAL
MG_MASS_NEWSEG
MG_MASS_NEWSEG
WRF_DISCONT_FACT_E
Note: This is for transaction code MM01, MM02 & MM03.
Regards,
Saravanan M

Similar Messages

  • User exit  for MIGO  after the material document is created?

    hi  guys ,
    I have requirement like after the   material document was creted in migo  i need to call my new transcation. can any one please let me know how  i have to solve this ?
    Moderator Message: Unfortunately, this is not a training forum and we can teach all about Exits and Badi's. I suggest you take a classroom course..... or do some R&D first
    Edited by: kishan P on Nov 30, 2010 11:57 AM

    Hi
    U need to create a FM with UPDATE MODULE attribute checked: so you fm can be run in UPDATE TASK
    This fm has to have the same interface of the method of the BAID (or user-exit) or a parte of it, if you don't need to use all parameters of the interface.
    All code to schedule the job has to be placed in this fm: you can use the fm JOB_OPEN and JOB_CLOSE in order to scheule a job programmatically.
    Call this fm in the BADI, the call has to be in UPDATE TASK, in this way your porgram can start as soon as all updating processes are over
    Max

  • User exit/BADI triggered when WWI document is released in CG02

    Hi,
    In CG02 when a WWI document is created for a specification i want to know user exit/BADI associated when the document is released/accept in the report management.
    Any help would be appriciated.
    Thanks,
    Sridhar.

    Hello
    the user exits mentioned do have special purposes.
    C1G20001 and C1G20002 are related with report management system
    C1G20003 and C1G20004 are related with report information system
    The other exit is related to tasks which can be "programmed" in using the report header. The "release/accept"  process is generally related to the definition of the generation variant.
    Regarding the mentioned BADI I have no special knowledge if it can be used here.
    Could you indicate the reason behind your question?
    Reason is: based on the generation variant definition there is no "real report" which can be "released" or the report is immediately "released" and the user exits mentioned will not help any more in most scenarios.
    With best regards
    C.B.
    PS: I have done a small research: Badi EHSS_WWI_BADI_001 is available starting ERp 6.0 o my knowlegde; depending to your business needs there is a chance that this Badi can help.
    Edited by: Christoph Bergemann on May 24, 2010 3:57 PM

  • Is there any user exit/ badi to populate the partner bank type for   F-63.

    Is there any user exit/ badi to populate the partner bank type (field name BSEG-BVTYP) in transaction F-63. There is exit ‘ZFI_FOAP_CDITEMS_00001011’ having BKPF and BSEG as only import parameters so I can’t change the value for BSEG-BVTYP.
    So could you please let me know any exit where I can change the value for BSEG-BVTYP for transaction F-63?
    Thanks in Advance,
    Steevan

    hi,
    Below r the user exit related to transaction  F-63.
    Check out if any of them will solve ur Query..
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment)
    Reward points if helpful,
    Regards,
    Brijesh

  • User exit/BADi to populate the header text in MIRO transaction

    Hi all,
    I am searching user exit or badi to populate the header text in MIRO transaction.
    My requirement is, before post the invoice I need to populate the some text in Header text field (MIRO -> Details tab -> header text field). I need to populate this field in the MM document as well as FI document (Accounting Document). I have tried all the user exits and BADi's related to MIRO/MRRL. Doesn't work. If anybody knows please share.
    Thanks,
    Santosh
    Edited by: Santosh Ghonasgi on May 13, 2010 4:48 PM

    Hello santosh,
    I am not sure whether a suitable exit / BADI exists to update the header text in MIRO directly.
    there is one related forum:
    User exit/BADi to change the header text in MIRO transaction
    Hope, it may helpful for you to proceed with some other parallel solution.
    Regards,
    Selva K.
    Edited by: Selvakumar Krishnan on May 13, 2010 5:29 PM

  • User Exit & BADI for controling the END user in co06

    Hi
    I HAVE SOME 2 DOUBTS
    1.  I  need a user exit /  BADI  for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
    the control should be actve for specfic order type for specfic users
    2  DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

    Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

  • User exit/BADI for changing the exchage rate type in MIGO

    Dear guru's,
    Please help me in finding the user exit/BADI to change the exchange rate type in MIGO.
    Regards,
    Abdul Rahim

    did you check this one MB_GOODSMOVEMENT?
    also exchange rates needs to be changed at Purchase order level and those will be reflected while creating MIGO.

  • User Exit/Badi while saving the PO before it is processed

    Hi,
    We have a requirement where in we have to change the release strategy of a PO on saving it , but,before it gets processed. Please let me know if there is any user exit or badi for this scenario.
    Thanks,
    Prasath N

    Hi,
    Thanks for your reply.
    But by the time the above user exit / badi is executed, the PO is outputted, i would like to change the release strategy b4 the PO gets outputted. Any suggestions?
    I am in ECC 6.0.
    Thanks,
    Prasath N

  • User exit/BADI to change the Accntg doc which gets created during Billing

    I am trying to do the following . Is this possible ?
    When a delivery related billing document is created an accounting document is created in the background , I want to modify the line items in the accounting document, Just before posting the accounting document.
    I am using  exit EXIT_SAPLV60B_008  as suggested but I don't see the accounting line items in any of the internal tables in this exit.
    My accounting document when it gets created looks like this. And I want to modify one of these lines before the document is posted.
    Thanks in advance.
    Regards,
    Ankur Bhandari
    1 01 32517 Jaaaa 3,700.83 USD
    2 50 3100000 MERCHANDISE SALES 3,199.96- USD
    3 40 3100000 MERCHANDISE SALES 160.00 USD
    4 50 3200000 DELIVERY INCOME 132.00- USD
    5 50 3200000 DELIVERY INCOME 10.00- USD
    6 50 2170156 SALES TAX COLLECTED 198.87- USD
    7 50 3400000 WARRANTY INCOME 320.00- USD
    8 15 32517 Jaaaa 3,700.83- USD
    9 40 1117217 RECV. VISA/MCARD Sto 3,700.83 USD
    Any answers on how can I delete line 1 8 and 9 and add another line which balances the amount ?
    Need to do this just before the accounting document gets generated.
    Is this possible ?

    Hi Ajay,
    I just want throw a light on your issue.
    There are couple of other user-exits also available here.
    Just check the required data is available or not?
    EXIT_SAPLV60B_001              User Exit AC Interface (Header Line)               
    EXIT_SAPLV60B_002              User Exit AC Interface (Customer Line)             
    EXIT_SAPLV60B_003              User Exit RW Interface (Cost)                      
    EXIT_SAPLV60B_004              User Exit AC Interface (GL Account Item)           
    EXIT_SAPLV60B_005              User Exit AC Interface (Accruals)                  
    EXIT_SAPLV60B_006              User Exit AC Interface (Tax Line)                  
    EXIT_SAPLV60B_007              User Exit AC Interface (Customer Line)             
    EXIT_SAPLV60B_008              User Exit AC Interface Transfer Tables             
    EXIT_SAPLV60B_010              User Exit Item Table for the Customer Lines        
    Thanks,
    Ramakrishna

  • User Exit / BAdI to update the pricing conditions of the Purchase Order

    Hello SAPients,
    This is my requirement:
    "Copy the Pricing Conditions from the Shipment Cost Document (VI01 / VI02) to the automatically generated Purchase Order".
    I'm using the enhancement V54U0002 (Function Module EXIT_SAPLV54U_002) to EXPORT  the values of the Pricing Conditions to memory and I have used the enhancement MM06E005 ( FM EXIT_SAPMM06E_006, 007, 012, 013, 014, 016, and 017) to IMPORT the values from memory and store them in TKOMV. But, when the PO is generated the values don't stay, they are always changed with the standard PBXX pricing conditions.
    My question is: Does anyone know the User Exit / BAdI that I can use to change the Pricing Conditions of the Purchase Order?
    <<removed_by_moderator>>
    Thanks!
    Edited by: Vijay Babu Dudla on Jan 14, 2009 11:08 PM

    >
    kartik tarla wrote:
    > check this badi
    > ME_PROCESS_PO_CUST
    >
    > and the following user exit
    > Goto-> include RV61AFZA then search for
    > USEREXIT_PRICING_RULE see if its helpful to u.
    Hello Kartik / SAPients,
    I tried with ME_PROCESS_PO_CUST but didn't work. The system doesn't execute that code. Any other idea would be greatly appreciated.
    Thanks.

  • User exit/BADI for Deleting the Empty Handling unit

    Hi All,
    Can anyone give me the suitable User exit/BADI for the below scenario.
    While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
    Thanks in advance.
    Thanks
    Ramesh.

    Find below couple of  User Exits for Transfer Order.
    MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
    MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
    The Exits gives you access to LTAK and LTAP.....
    Hope this is helpful to you.
    Vinodh Balakrishnan

  • User exit / BADI to add the condition type in PO

    Hi Friends,
    The scenario is like user will be creating the Sales order & after that user will create the PR & immidiately after that PO will be created from PR no.
    I will be checking for some Z* condition type in sales order & if its present in sales order I have to add that condition type in PO.
    So for this I am searching for user exit or BADI.
    Please help me out with this.
    I have already tried following user exits & bADIs
    1. RV61AFZA - cant use because i dont get the PR no or SO no in this exit.
    2. RV61AFZB - cant use because i dont get the PR no or SO no in this exit.
    3. also tried the enhancement MM06E004 - if I add new condition type in XKOMV table condition type is not getting updated in PO.
    4. MM06E005 - if I add new condition type in XKOMV table condition type is not getting updated in PO.
    5. ME_PURCHDOC_POSTED - this BADI dont allow us to add the new condition type to std internal table.
    If you know anything apart from this then please do let me know.
    Full points will be awarded for the correct answer!!
    Best Regards,
    Aditya
    Edited by: aditya aghor on May 26, 2008 8:59 AM
    Edited by: aditya aghor on May 26, 2008 10:33 AM

    Transaction Code - MIRO                     Enter Invoice                                                                               
    Exit Name           Description                                                                               
    LMR1M001            User exits in Logistics Invoice Verification                   
    LMR1M002            Account grouping for GR/IR account maintenance                 
    LMR1M003            Number assignment in Logistics Invoice Verification            
    LMR1M004            Logistics Invoice Verification: item text for follow-on docs   
    LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting   
    LMR1M006            Logistics Invoice Verification: Process XML Invoice            
    MRMH0001            Logistics Invoice Verification: ERS procedure                  
    MRMH0002            Logistics Invoice Verification: EDI inbound                    
    MRMH0003            Logistics Invoice Verification: Revaluation/RAP                
    MRMN0001            Message output and creation: Logistics Invoice Verification    
    kevin

  • User Exit/Badi to change the billing plan date when create sale order

    Experts,
    Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
    My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
    I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

    Hi,
      check the include MV45AFZB.
    Thanks & Regards,
    Sateesh.

  • User Exit / BAdI to update the External Patient ID.

    Hello SAPients!
    I've been searching everywhere and I can't find a BAdI or User Exit to automatically update the External Patient Identification Number (NPAT-EXTNR). I've just found BAdIs to validate the correctness of the field but not a way to automatically change it. Anyone has done this before?
    Thanks!

    Solved on my own. I found the User Exit NEXTNR00.

  • Cancel the material document creation process

    Hello Experts
    I am having the requirement where i have to check for some custom validations before posting the material document. If those validation fail, material document should not be created.
    i tried that by finding suitable user-exit or BADI for MIGO but it seems every user-exit or BADI gets fired after material document is created. What i am looking at is when we 'Check' the document it should also include our custom validations.
    I have implemented the similar scenario for PO creation.
    Thanks in advance
    Regards
    Rajeev

    It is a mess! when the delivery is reversed, the user should have used correct reversal date. Now you can't cancel the material document. Consult MM specialist to add the quantity in the past period and off-set the same in the current period.
    On a second thought, check with your accounting if you PGI in the current period as the reversal and new PGI happened in the current period, which off-sets the entry in accounting.If they are OK, then you need not bother about this.
    Regards,
    Edited by: Shiva Ram on Apr 7, 2011 11:56 AM

Maybe you are looking for

  • Linked Recon event does not show up in user's provisioned resources

    I am totally new at this Orcale OIM stuff and I have looked through this forum and have not found an answer. I have configured the connector and and (I think) successfully ran the EBS_TR_User task limiting it to one specific user. It runs and I do no

  • Question re: Ethernet Connection

    Hi - My Apple TV3 is setup with a cable from our Verizon router to a new Airport Exreme, and an HDMI cable from the Airport Extreme to our receiver.  It works fine, but I heard that I'd get a faster response if I connected the Apple TV directly to th

  • How do we measure the TAT in a worklist app

    I need to displayt the Turn Around Time to the end user in the worklist app. Any hints on how it can be done. Thanx Ashutosh

  • Saved file doesn%27t match original text

    Using LV 2010.  I have an application where I'm encrypting a file and saving it to the hard drive as a text file.  The problem I'm having is that the string of characters that I'm writing to the file does not match the string of characters that are r

  • O8i dmp file to Oracle XE

    I have an Oracle 8i dump file and need to transfer/load it to Oracle Express on my laptop. What are the steps to do this? Or, where can I find the documentation to do this? Tom, [email protected]