User log changes

Hi,
I want to know the list of changes done by the user on a particular date in sap tm. Can you inform me how do I trace that.
Also is there a way if I can know on a particular date who and what changes has been done in TM system?

use SLG1 log to trace the user changes or you can use change document functionality

Similar Messages

Using alter user to change oracle password for logged in web user on XE

Hi All
I'm building an app using the pl/sql web toolkit on XE (installed on Win XP Pro SP2). (I'm not using the APEX front-end).
I'm using basic authentication and oracle database user accounts, and when a user registers for the first time I create them an oracle user account with dynamic sql, followed by some initial setup stuff, and they then log in with it.
All fine so far.
However I want to allow the user to change their oracle password as part of maintaining their user details. I've done this in the past using the web toolkit and Oracle 9i and it has worked fine using dynamic sql.
Unfortunately I can't get the same thing to work in XE.
For example, if I create the following procedure in the schema aligned to the DAD which holds my application and then run it from a browser (IE or Firefox) then the
Browser and the db just hangs - not even an error message:
CREATE OR REPLACE PROCEDURE ut
AS
v_stmt varchar2(300);
BEGIN
HTP.htmlOpen;
HTP.headOpen;
HTP.title ('User Test');
HTP.headClose;
HTP.bodyOpen;
v_stmt := 'alter user "'||user||'" identified by "BERT"';
htp.print(v_stmt);
EXECUTE IMMEDIATE v_stmt;
htp.print('Done');
HTP.bodyClose;
HTP.htmlClose;
END;
If I run the same statement in SQL*plus it's fine, and if I run the same proc for a different user then it's fine too.
I'm sure it's something to do with trying to change the credentials of the currently logged in user, but I would at least have expected an error message.
I'd be grateful for any ideas.
Thanks
Steve

Hi g.myers
Thanks for your response.
Sorry, yes, bad turn of phrase there. It's not the entire db that hangs. The web browser (either IE or FF) hangs, and if I look at v$session at this point, I can see that the user STATUS=ACTIVE and the STATE=WAITING.
I should also point out that I am using standard Oracle users as users of the application, (e.g. create a new user account called TESTER1). These users are then granted the appropriate privileges on the owning schema in order to run the app, access the tables etc.
Therefore it is the user account (e.g. TESTER1) that is running the password change procedure that is owned by the SYS schema. (However again, this is the exact code and method that I've used in the past and it has worked fine).
If I leave the browser hanging long enough, it will eventually return with the following error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /h/hopapp.pwdmaint_do.
Reason: Error reading from remote server
cheers
Steve

How do I change the user log in screen background on Lion?

Note:I'm talking about the screen for Users Log where multiple users log in.
Right now the default is a solid grey. there has to be a way to change it to something more esthetically pleasing.

Look for a previous entry in this group
"Lion Default Login Window" It was back around August 2nd or so.
There may be a better way than is listed in that thread but so far I haven't found it but I have been tied up with other Lion problems and have not really looked much further on the default login window issue.

Change The Way Users Log On Or Off

So I am trying to change the way users log on or off, and so I went onto User Accounts, clicked it, and it shows an error. I need to uninstall vrlogon.dll, somehow. I have searched through the internet, and I did all the steps. However, when I rebooted my laptop, it did not work. I was going to the Welcome Screen. If you can, please help.

Hello,
Which version of Microsoft Windows are you running? I do not have a VRLOGON.DLL file on my installation of Microsoft Windows 7 Ultimate Edition x64.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

JS link - change field according user logged in

Hi at all,
is it possible in JS Link to get the current user (user logged in ) ?
I have to show different button in a field according the group of the user.
I can show the button but I have difficulties to get the current user and change it .
Thanks in advance
IJ

The solution is : _spPageContextInfo.userId Thanks to Giuseppe Marchi

Need log of the users who changed the partner profiles.

Hi,
Some user has been changed partner profiles of the CUA configuration Setup.
It is displaying only Agent Name. They delete the Inbound and outbound parameters of the partner profiles created by CUA. So, I need to trace out the user who changed these parameters.
It will be appreciate if anybody can help in this issue.
Thanks,
Shiva.

I resolved this issue by deleting the partner profiles created by CUA in all child clients. And delete the Distribution model in all child clients and re-distribute the distribution model from Master client.
Now its working fine.
But I am not able to trace out the user who changed partner profiles. I checked in ST03N but i didnt get the information abt the we20. ( I am using ECC 6.0 version).
And in WE20 it is not showing any User ID who changed the partner profiles. I checked in following tables but I didnt find any changed details of partner profiles.
EDIPHO
EDMSG
EDP12
EDP13
EDP21
EDPP1
T002T
T005T
Regards,
shiva.

How to set printer margins if using a lot of printers in virtual desktops which are deleted each time users logs off

Hello,
i am using Firefox version 31. I have a problem with page setup margins. I need to use left
30mm; right 10mm; top 20mm; bottom 20mm. I am using VMware floating assignemnt linked clones
virtual desktops. After users log off - machines are deleted and users next time logs on get's brand
new VDI's. Users gets printers to VDI using login script from Active Directory.
Option Explicit
Dim strPrinterUNC, objNetwork
strPrinterUNC = "\\some_server\printer_number_1"
Set objNetwork = CreateObject("WScript.Network")
objNetwork.AddWindowsPrinterConnection strPrinterUNC
WScript.Sleep (20000)
objNetwork.SetDefaultPrinter strPrinterUNC
Set objNetwork = Nothing
Each user have different logon script, because they use different printers (different printer names e.g. \\some_server\printer_number_2 ; \\some_server\printer_number_3 and etc. Page setup margins in Internet Explorer are ok. But how to make Firefox page setup margins as i need? For other options i have
used CCK2 Wizard 2.0.4 tool. It worked fine. Maybe i can put some information in C:\Program
Files\Mozilla Firefox\defaults\pref\autoconfig.js I have some usefull data in it allready. I
have found info that: "Setting print margins is done in the printer settings". I have a lot of
printers, so i can not set printer margins individualy for each of them. Now mozilla shows top,
bottom, right, left each 12.7 mm. What should i do if i have a lot of printers in enterprise
environment?

Firefox has a profile folder that has preferences to save this. But the config that would need to be changed is:
print. save_print_settings = True - (default): Save the print settings after each print job
Locking that preference: [http://kb.mozillazine.org/Locking_preferences]
Or done manually:
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
Check these values accordingly and change them if necessary.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
Newton Mar
17 at 17:09

How can I allow users to change an image on my site?

I am running this website... www.northernilskywarn.org
I have user log ins/permissios set up. However, the flashing GIF image in the top left that says "current net status," I want logged in users to be able to land on a page, have something like a drop down box or something that has different options like "Blue, Green, Yellow, Red" so when they click the image they want, click submit, it changes it on the site. I'm not sure what kind of script I would use.
Thanks in advanced!

You might want to take time to work through this 3-part tutorial.
Building your first dynamic website:
http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
Nancy O.

How to allow users to change password

I have enabled users to change their passwords in the Server.app for the Default Site with SSL, and who can access is a group of individuals.
When I load up the Server site, I am presented with
a Login to which I then add my username and password and I am then presented with
Welcome to OS X Server
OS X Server makes it easier than ever for the people in your organization to collaborate, communicate, and share information.
I Choose My Settings and the site is redirected to /changepassword of which a page comes
Forbidden
You don't have permission to access /auth/ on this server.
The Directory /Library/Server/Web/Data/Sites/Default/auth/ exists with the corret permissions. This is an empty directoy tho
Apache Logs:
Directory index forbidden by Options directive: /Library/Server/Web/Data/Sites/Default/auth/
I cannot get this to work. WIki's are turned on but that doesnt work either.
If I Launch /wiki, I am prompted to login, to with I do, and i just get a blank web page
Apache logs:
File does not exist: /Library/Server/Web/Data/Sites/Default/__collabd
This is on a new install of OSX server
Any Suggestions?

Hi,
On the landing page at the bottom it should say "change password".
That brings you to a forbidden page?
On my server I do not have the /auth/ folder in my default site, but my changepassword page does work.
Can you check if going to https://127.0.0.1/changepassword does work? It will give an SSL error.
Then it might be DNS related conflicting with another router/server in your network
Or... charge $ 5 per user to change his or her password personally
Goodluck!
Jeffrey
StarPine Support

Users logging on via CIF's lose login capability

Multiple Netware 6.5 sp7 servers, with CIF's configured to offer windows
shares to computers that do not use Novell Client.
For years now, I've been able to set up XP Pro x64, Vista Business (x86 &
x64) and Windows 7 (x86 & x64) systems so that they log in and map drives
via the "Net Use" command. For instance, if I have a Netware server located
at 10.10.20.5, it has a share named M_Drive and user BOB has been set up
using iManager so that he has access to said server and folder, I could map
a drive on one of the aforementioned systems by using the following command
Net Use M: \\10.10.20.5\M_Drive /u:bob {bob's password}
Running that command would result in the appearance of an M drive on the
workstation with Bob's access rights.
If you were to go to the Netware server that Bob just logged into and go to
the connections screen for the Monitor NLM (or access connections via Remote
Desktop) you would see that user BOB had a connection; however, no
information regarding the IP address that BOB was connected from would be
available. This connection would be the type that isn't preceded by a "*".
eg the connection is listed as "BOB.CONTEXT" as opposed to "*BOB.CONTEXT"
Anyways, starting yesterday, random users on my network are losing the
ability to connect using the aforementioned method. Bob will try to log in
and get an error message. Trying to access \\10.10.20.5 from Windows
Explorer returns an error. If I check Connections, I find that there are
multiple "*BOB.CONTEXT" connections, but no "BOB.CONTEXT" one. Clearing the
"*" connections will have no effect in permitting BOB to connect.
If I go to other machines, even ones with the Novell Client, and try and
login as BOB or use the aforementioned drive mapping technique, Iit fails.
If on a machine that won't allow BOB to connect to the Novell server I use
another users' name and password, the connection works.
Thus, the problem is at the Novell server and is particular to a given user.
The "problem" user will change from day to day.
If several hours later I try logging in as my problem user, it works.
1) Anyone encountered a problem like this one?
2) Is there a setting within Netware 6.5 sp7 which controls the length of
time that a disconnected user's connection is kept "live"? If the system
"naturally" eventually releases these problem users, maybe I can do
something to make the release happen earlier.
3) Does performing a DSRepair sound like a good idea?
4) Is the Netware 6.5 sp8 update still available? Wondering if installing
that might resolve the problem.
I look forward to your response.

On Fri, 14 May 2010 17:56:18 +0000, Phillip Armitage wrote:
> 3) Does performing a DSRepair sound
> like a good idea?
No. You've not, so far, provided any information that points to a problem
in eDirectory.
> 4) Is the Netware 6.5 sp8 update still available?
Yes.
> Wondering if installing that might resolve the problem.
It might. I'd certainly try it, and the post-sp8 updates, before spending
much more time troubleshooting this.
David Gersic dgersic_@_niu.edu
Novell Knowledge Partner http://forums.novell.com
Please post questions in the newsgroups. No support provided via email.

JBO-25014: Another user has changed the row with primary key oracle.jbo.Key

Hi,
I am developing a Fusion Web Application using Jdeveloper 11.1.2.1.0. I have a home.jspx page that has a ADF table built on efttBilling View Object. . When you click on one of the rows in the table, it will take you to detail.jspx where you can edit the row and save. When 'save' is clicked, stored procedures are executed to update/insert rows into few tables , and then go back to home.jspx where you need to see updated content for that row.
To get down to the exact issue, updates are made to the tables on which the efttBilling View Object is built using a stored procedure. Once this is done, I am trying to requery view object to see new content. But I keep getting JBO-25014: Another user has changed the row with primary key oracle.jbo.Key error. Following are the approaches I followed to query new results:
a. Executed Application Modules Commit Method. Created 'Commit' Action binding and tied it to homePageDef.xml. Called this binding from a view scope bean.
    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
     OperationBinding operationBinding = bindings.getOperationBinding("Commit");
    Object result = operationBinding.execute();
   if (!operationBinding.getErrors().isEmpty())
    return null;
b. Marked 'Refresh on Insert' , 'Refresh on Update', 'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
c. Tried to Requery View Object. Created a refreshViewObject method in Application Module Impl.java file, exposed this method to the client interface and created a invokeMethod Action binding in home.jspx
Code in Application Module:
public void refresheftTransactionsforBillingAccountViewObj1View()
    System.out.println("In eftTransactionsforBillingAccountViewObj1");
findViewObject("eftTransactionsforBillingAccountViewObj1").executeQuery();
Code in view scope bean
        DCBindingContainer bindings =
       (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
        OperationBinding operation =
        bindings.getOperationBinding("refresheftTransactionsforBillingAccountViewObj1View");
        operation.execute();
I have searched web, ADF forums and tried methods suggested in there but no sucess.
Could anyone please provide some insight in this issue. I have been battling with this since quite some time. I can provide you with the log file too.
Thanks!
Shai.

What code does your Commit method have .. can you try using the Commit executable from the AM itself instead ?
Also -
Shai wrote:
'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
which all attributes you set this property for . it should just be for History columns as such.
Did you also check if this could be your scenario ?
Decompiling ADF Binaries: Yet another reason for "JBO-25014: Another user has changed the row with primary key orac…
OR
JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
OR
Another user has changed the row with primary key -Table changed externally
Message was edited by: SudiptoDesmukh

Registration of user password change in Oracle Identity Manager 9.1.0.2

Where I can find record in Oracle Identity Manager 9.1.0.2, if a user password change.
There any log, report, etc ...?
thank you very much

Check this: Re: Audit when change password fails
-Bikash

Error when opening BPEL Console:No domains accessible to the user logged in

Hi,
I have upgraded the SOA SUITE from 10.1.3.1 to 10.1.3.4 by applying the patch. Before applying the patch, I run the scripts to upgrade the database for both ESB and BPEL. After applying the patch I made the change in <ORACLE_HOME>\j2ee\oc4j_soa\configdata-sources.xml file for the BPELPM_CONNECTION_POOL parameter. But when I am opening BPEL Console it is showing the error like “No domains accessible to the user logged in". And in the log file I am getting the error like
ORABPEL-03003
Incorrect db schema version.
The database schema version "2.0.4" from the database does not match the version "10.1.3.4.0" expected by the server.
The database schema currently in place has probably been configured for a previous release; please re-install the database schema and try to start the server again.
Does anybody knows how to fix this problem?
Thanks,
Anju

Hello,
I had the same problem and reconfiguring the datasources.xml was the solution. Because the installer replace its values with all wrong values. For example: using polite driver instead OracleDriver, 1522 instead 1521, user and password.
That solved my problem, maybe you must check all parameters of the datasources.xml and restart the server.

How to restrict users cannot change their password

Hi all,
If i logon to E-Business Suite home page, click on the preferences icon on the right hand top corner of the home page, i have an option to change my password.
How will i diable or restrict this such that no users can change their passwords after first time creation.
Regards,
Prasad

hi prashant,
i could do this by logging in as sysadmin, personalizing that particular page (preferences) and setting it for only site and org. it is effected for all the users
Thanks for reply
Prasad

User log changes

Similar Messages

Maybe you are looking for