User Profiles being created and not using existing

I have a Windows Embedded 8 thin client. It will create a user profile when a user logs on and if they log off and log back on it will use the same created profile. However if we restart the thin client and go to log on it will create a completely
new profile for the user. It does this every single time it is restarted and a user logs on. So under the users folder it will have several copies of profiles for that user adding something to it each time. Example: Username, Username.Domain, Username.Domain.000,
Username.Domain.001 We have turned off the netXclean to keep it from removing the user profile at logoff. I have added the C:\Users folder to the write filter exclusion list to make sure it is allowed to write to that location. What would cause
it to not use the exisiting user profile for a user and recreate one only after a restart? It is a soft restart/shutdown we aren't hard powering off as I could see the user profile getting corrupted if that were to happen.
Luke

Hi,
It seems like your account log as temporary profile. Please navigate to the registry below and delete the effected profile's subfolder for test.
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Here is another thread that have multiple talking about Temporary profile, maybe helpful with your problem.
http://social.technet.microsoft.com/Forums/windows/en-US/5ec0b949-effa-4e30-ba09-dc948a4c7a8b/windows-7-starting-with-a-temporary-profile
Roger Lu
TechNet Community Support

Similar Messages

User profiles being created on the CAS

After a recent disk space warning i noticed that under the C:\Users folder there are a large number of user profiles in there. There is really nothing in the profiles except for shortcuts that show up for any account created. Now i know there should be one for each account that actually logs into the server however all my users are getting folders in here, not just the admins who log in.
We have 2 CAS servers load balanced running on Server 2008 Sp1 64 bit.
The creation dates of these folders very from the day we went live with exchange 2007 to yesterday. There are different user folders on each of the 2 CAS servers.
Each user folder shows up in the User profiles app as: Name "domainname\username" Size "2.89MB" Type "Local" Status "Local".
I did notice that my user account as well as some of the other IT staff user accounts do not have folders in here and we user Outlook 07 and Webmail.
We do have some users using Outlook 03 as well.
The CAS is not doing anything other then running as a CAS\hub transport roll.
Any thoughts on why this is happening or is this normal?
ThanksService Delivery Specialist

Its nice to know it's not just me.
I am curious though as to why this is happening, why some users have a folder and some don't and what the purpose is. While this doesn't really hurt anything it is taking up over 200MB of space on the C drive of each of my CAS servers.
Service Delivery Specialist

Order types, why do we need to create our order types and not use the stand

HI
Order types, why do we need to create our order types and not use the standard ones during implementation.

Hi Raj,
Well there is no hard and fast rule that you have to copy nad create a new order type. Its just to meet our own requirements that we copy the standard and make the changes if required to meet our business needs.
And by this way we keep unchanged the standard order type for further use.
If you are sure that the standard order type satisfies your need you can directly use that only.
I hope this clarifies the issue.
Do reward if find useful
Regards,
Abhi

A file which was created and saved using Adobe Photoshop CS6 is not opening anymore HELP

Hi, please help with my issue which is as follows:
A file which was created and saved using Adobe Photoshop CS6 is not opening anymore and sends a message saying that the file is not compatible.
What should I do, I have invested so much in that file and I dont think i will be able to do it all over again.

That's why people do incremental saves and use backups... You could try to open the file in an image viewer like IrfanView and see which parts are salvagable, but that's as good as it gets most likely...
Mylenium

User Profile Incremental Sync does not views changes in profiles.

User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD.
All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
1.profile property is set up to sync with AD attribute (with EXPORT).
2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
3. sharepoint server 2010 SP1, "CU June 2012" 14.0.6123.5002
4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
which I resolved by clearing timer service cache.
Help with advice, urls or solurions please..

Hi VlH,
According to your description, the issue can be caused by the Profile or Profile Values table.
You can check the event log and ULS log to see detail error message.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For your issue you can refer to the similar thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
Also a good blog for user profile synchronization:
http://www.harbar.net/articles/sp2010ups.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Why Has Adobe Removed The Option For Individuals To Purchase Software And Not Use The Cloud?

As an individual who has been using Adobe products for about 25 years for my personal use and not as a business, I find the new policy of "renting" the software and using "The Cloud" for, at least in my case, a prohibitive monthly fee, to be totally unacceptable and will result in my no longer being able to afford using Adobe products. I do not understand why Adobe cannot offer their new cloud program for individuals and companies that may wish to use the new system and have the resources to pay in perpertuity, but they should also have the option for those of us who would rather purchase upgrades for whatever programs we use and keep them on our computer without "The Cloud" service.
I am 67 years old and living on a fixed income. I basically use four adobe programs... Photoshop, Premiere, After Effects, and Audition as I do volunteer work at a local non-profit radio and tv organization. If I were to "rent" those individually it would cost $80 per month... so I could take the next deal and get access to all software for $50 per month... I cannot afford either of those. If I could upgrade one or more of the programs every two or three years... keeping them on my computer and not using "The Cloud," then continuing to use the products would be doable. However, being forced into a program that requires a monthly fee and use of "The Cloud" which I do not need to use, seems totally unfair. I certainly understand that there are businesses and individuals who will love the new program, but why not have the option? Or perhaps a "Senior" discount as you do for educators and students?
Something to think about. It seems Adobe may be moving to the "Cable Television" model of monthly fees that will go no where but up.

Hey there, you may have heard that Adobe is continuing to sell and support CS6 for customers who prefer traditional licensing. It's last year's version instead of the latest-and-greatest CC release, but it's something to consider if that's important to you.
As far as a "senior discount" on Adobe software, there has never been one – but one thing to consider is becoming a student or teacher because there is no age restriction on that, in which case you may become eligible for education discounts.
Hope this helps.

Configuration Wizard in ID is not using existing Communication Channel

Hi,
I am using PI 7.1.
I created a Communication channel FileSenderCC for a Business System Sys_Sample_One_D with Party as blank.
After creating i can see below object in the list of communication channels in the left pane.
|Sys_Sample_One_D|FileSenderCC
After this when i use Menu: Tools -> Configuration Wizard -> Internal Communication, to configure the scenrio, I selected the Business System Sys_Sample_One_D and Adapter Type "File", and proceed, while selecting the sender communicaiton channel, it cannot find the FileSenderCC that i created.
If i manually enter FileSenderCC, and complete the scenario, it is creating a new communication channel with the samename, and not using the exisitng one.
After that i see two communication channels in the left pane.
|Sys_Sample_One_D|FileSenderCC
*|Sys_Sample_One_D|FileSenderCC
does this happen in PI 7.1 only, because when i worked in 7.0 long time back, i dont think i got this issue.

Hi,
I had the same issue on PI 7.1, it looks like a bug, but I found no note about it.
I think you should open an OSS message for this.
Kind Regards,
Sergio

Reinstall DB and ASM using existing RAW devices in RAC

Hi,
We have two Database servers in Cluster environment DB1 and DB2 using CX300(SAN) as Storage device.Recently we had upgraded the OS kernel on DB1 from RHEL 3 to RHEL 4 and DB2 is still running on RHEL 3. Due to some application problems we wanted the DB1 to be rollbacked to RHEL 3
DB1-has ASM1 instance and DB2 has ASM2 instance running.Similary SID1 and SID2 on both of them.
Since we want to roll back to RHEL 3 it is a clean install on DB1. So my problem is I had never done this kind of reinstallation of DB and ASM using existing raw devices.
Can Someone sent me out some instructions and steps on how to do the reinstall without disturbing RAC,DB2 and Data on RAW/CX300(SAN) device.
I am basically a system admin not a complete Oracle DBA.I will be grateful for your help.
Thanks,
Shiva

It means, before proceeding a proper database backup must be taken, then it has to be started from scratch. RHEL3 is certified with 10gR1 and 10gR2, you should be aware of the patchsets available for the oracle version.
I suggest you to read the Clusterware and RDBMS installation guides:
Oracle® Database Release Notes
10g Release 2 (10.2) for Linux x86
B15659-03
Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide
10g Release 2 (10.2) for Linux
Part Number B14203-08
Installing Oracle RAC 10g Release 2 on Linux x86
~ Madrid

WLCS 3.5 - Creating portals not using GUI tools

are there any docs that describe how to create portals not using the GUI,
ie, what data gets added and where so that we could automate the creation of
a portal if we wanted to?
thanks
Filip
~
Namaste - I bow to the divine in you
~
Filip Hanik
Software Architect
[email protected]
www.filip.net

are there any docs that describe how to create portals not using the GUI,
ie, what data gets added and where so that we could automate the creation of
a portal if we wanted to?
thanks
Filip
~
Namaste - I bow to the divine in you
~
Filip Hanik
Software Architect
[email protected]
www.filip.net

My App Store is not working.a bingo blitz bar is being displayed and not going away.what is to be done to make App Store work again

My App Store is not working.a bingo blitz bar is being displayed and not going away.what is to be done to make App Store work again.

Hey Charyasmin,
Thanks for the question, and great troubleshooting so far. You’ve definitely taken the proper first steps. To continue to troubleshoot, the following articles may help:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

I am trying to use Photoshop 10. After my catalog loads. I am told to log into my account. My user name is correct and I use a new password. That password lets me log in to my Adobe account and even allowed me to loadp

I am trying to use Photoshop 10. After my catalog loads. I am told to log into my account. My user name is correct and I use a new password. That password lets me log in to my Adobe account and even allowed me to load a 30 day trial of PS14i After I enter the password I am never allowed to go any further, What do I need to do to get into my catalog?

I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

How feed many record in table component and not use append command again

hi master
How I feed Multiple records in table component and not use append and save command again and again
Same as oracle grid
I give many record and save one time
Please give me idea how I add Multiple record and save one time not use append and save command again and again
Thank�s
aamir

Hi!
appendRow() method just add temporal row. For add them to DB commitChanges() method should be used. So you can use appendRow() method several times, fill every new row and only then use commitChanges() method. In this case all new rows will be added to DB per one time.
Thanks,
Roman.

I m using apple 6 .u lauch 8.1.3 then i update my mobile then error 53 .. isuse and not used the mobile occurdind to eroor 53 my mobile is in under warenty im buying my mobile from u.s.a

i m using apple 6 .u lauch 8.1.3 then i update my mobile then error 53 .. isuse and not used the mobile occurdind to eroor 53 my mobile is in under warenty im buying my mobile from u.s.a . pls help how i solve this problem

Hey dheeraj55,
Thanks for the question. If I understand correctly, you have been getting an error when you are trying to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

Upon Sync of contacts with iTunes, I see duplicate contacts being created and it is listed as Share contact. I see multiple contacts like this in my "From My PC" and "iCloud"

Upon Sync of contacts ( Outlook ) with iTunes, I see duplicate contacts being created and it is listed as Share contact. I see multiple contacts like this in my "From My PC" and "iCloud". Please help resolve this problem and how to avoid these duplicate contacts?
Thanks!

Some general content and computer management information if at all helpful!!
Section 1:
          -About authorizing and de-authorizing:
http://support.apple.com/kb/PH1730
          Prevent unprompted syncing of your iPod, iPhone, or iPad:
Mac- http://support.apple.com/kb/PH1764
Windows- http://support.apple.com/kb/PH1677
Section 2:
          -iOS how to transfer or sync content to your computer:
http://support.apple.com/kb/HT1296?viewlocale=en_US
          Transfer purchases from your iPod, iphone, or iPad to an authorized computer:
Mac- http://support.apple.com/kb/PH2554
Windows- http://support.apple.com/kb/PH2566?viewlocale=en_US
          iOS: Importing personal photos and videos from iOS devices to your computer:
http://support.apple.com/kb/HT4083
           Backing up, updating and restoring:
http://support.apple.com/kb/HT1414?viewlocale=en_US
          Downloading past purchases from the App Store, iBookstore, and iTunes store
http://support.apple.com/kb/HT2519

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

Reboot your Mac, as soon as you hear the chime press the option/alt key and hold it until the boot manager appears, select OSX to boot from.

User Profiles being created and not using existing

Similar Messages

Maybe you are looking for