Username password works in SQL Plus not in SQL Developer

I have SQL Dev 1.2.1. It works fine with some databases, but with two databases with logons managed by Oracle Enterprise User it does not work. I receive an Ora 01017 error invalid username password. The user name and password work fine from SQL Plus and from a third party tool. I have a local developer client environment installed, so am using TNS. SQL Developer was installed before the client environment. I was not trying to access this database before the client environment install. I was using the basic connection before the client install. Neither basic or TNS connection works for this particular database.
Any ideas?

We have changed the password and it still does not work. There are no special characters in the password.
I am tempted to think the problem is the jdbc driver versions. The logon for Enterprise user controlled databases stopped working after I installed the thick client Oracle developer. I have tried to find the threads with information on disabling the thick client jdbc but have not found them. I also have tried to enter a URL for the thin client without success. One of our DBAs is saying that the 11g clients are broken and he is in communication with Oracle about it. He says 10g works but 11g does not.
Any further help would be appreciated.
Gerry

Similar Messages

SQL*Plus Not responding when calling edit command

When I write a Query in SQL Plus 9.2.0.1.0, Installed in Windows XP SP2, and running EDIT command, notepad opens and then SQL Plus and Notepad both hangs. By killing notepad.exe process I can continue working in SQL Plus.
I tried changing the default editor to ultra edit, wordpad, etc. But It seems to be a SQL Plus error, with all editors I set up, Editor Hangs.
The same things happende me installing the Oracle 9i client in another machine.
Need help with this, thanks!!

Sounds strange - and does not sound like a SQL*Plus problem. SQL*Plus uses the CreateProcess() Win32 API call to create the editor process. Then it waits for this process' process handle to cease to exist before it continues. SQL*Plus does not "hang" - it simply waits for the spawned process to terminate before it continues.
It is not possible for one process to "hang" another process it created via the CreateProcess() call. It will need to interact with that spawned process in other ways to make it hang. Caveat: unless the spawned process does not "like" the parameters passed to it via the CreateProcess() call...
The only parameter passed is the filename (usually afiedt.buf) by SQL*Plus - and that should not cause the editor to hang.
Unless there is a specific Oracle bug you're running in, this problem sounds more like a Windows issue. After using the ED command in SQL*Plus, can you manually view and edit the afiedt.buf file it created?

Can't FaceTime anymore? iPad states wifi connected and iPhone 4 states not connected? I have wireless in my home? Not sure what happened. Password works for iPad but not on phone?

iPhone won't connect to wifi. iPad is connected. Password working on iPad but not on phone. Can't upload software update of IOS 7.1 because phone not connecting to wifi?

Connect iPhone to computer and open iTunes. You will be prompted to update to iOS 7.0. Keep your phone connected until the update is finished.

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

How to invoke multiple sessions of sql*plus thru pl/sql program

Hi
How to invoke multiple sessions of sql*plus thru pl/sql program.
Thanks

How to invoke sql*plus in a procedure?????
I have to invoke more pl/sql sessions?????No you don't "have to".
Look at what you are trying to do.
You have a program running inside the PL/SQL engine. This is running nicely inside the Oracle database and is perfectly capable of issuing other SQL statements, PL/SQL programs etc. inside it's nice cosy Oracle environment.
You are asking for this PL/SQL to shell out to the operating system, run an external application, for which it will have to supply a username and password (are you planning on hard coding those into your PL/SQL?), and then that external application is supposed to run more SQL or PL/SQL against the database.
a) Why hold all this code external to the database when it can quite happily reside on the database itself and be executed through jobs or whatever.
b) Consider what would happen if someone were to replace the external application with their own program of the same file name... they'd be able to capture the username and password for connecting to the database, therefore a major security flaw.
The whole idea of doing what you want through external calls to SQL*Plus is ridiculous.

Sp2-0575: Use of oracle SQL feature not in sql 92 entry level.

Hi,
While logging to sqlplus I'm getting the following message
"sp2-0575: Use of oracle SQL feature not in sql 92 entry level."
and login is successful, but I'm not able to generate next value from the sequence .
t says no rows selected when i request
for nextval a
EX: select mySeq.nextval from dual; (mySeq is sequence)
Thanx,
Ravi.

What has happened is that someone has enabled the Oracle feature called as FIPS flagger.
This is a feature that Oracle provides to you if you plan to write SQL code that should be portable
to other RDBMS systems. IF you enable this flagger and use a feature which is not in the SQL standard,
Oracle will complain that use of this feature will make your application Oracle dependent, and you may not
be able to run this application against any other RDBMS.
To disable this for your SQL*Plus session do this:
SQL> set flagger off
SQL>
Once you do this it will allow you to use all SQL commands including Oracle specific extensions.

SQL Plus not work with domain user

Hey guys,
have a problem with sql plus in our network. when i started it with the admin it works. but when i started it with a user account, fill in the username, the password and the host and click on the ok button, the window closes and nothing happen. no error no new window, the window simply closes.
what to do?
regards

Hi,
There might be different reasons behind this.
Check whether user is created in database or not.
There might be possibility that, user is in different database.
SELECT * FROM V$DATABASE; --This will help you to findout database name.
SELECT * FROM DBA_USERS WHERE USERNAME = 'HR'; --HR is user present on database. If your user is present in database then user might not have connect privilege.
GRANT CONNECT , RESOURCE TO HR; --HR is user. To execute this command, login as sys You can also try to login with command prompt.
sqlplus user/password@host

SQL*PLUS not work in JDeveloper 10.1.3

The Log message is :
Invoking SQL*Plus...
F:\oracle\ora92\bin\sqlplus.exe SCOTT@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=W2G)))
java.io.IOException: CreateProcess: START.EXE F:\oracle\ora92\bin\sqlplus.exe SCOTT@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=W2G))) error=2
I need a help ! thanks .

Hi,
This is a known issue (bug 4774715) on Windows 2003 and is due to the fact that START does not exist on that OS. It is currently fixed in the next release but I will open a bug and see if we can get the fix backported to a 10.1.3 patchset for you.
Regards,
Lisa
JDev QA

SQL Plus not working in Oracle 8i personal edition

I just installed Oracle 8i personal edition, went through all the steps. When I start SQL* Plus, I give it the SCOTT/TIGER combo, but when it tries to start up the database, it asks for another password, which I can't figurew out.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by John Meyer ([email protected]):
I just installed Oracle 8i personal edition, went through all the steps. When I start SQL* Plus, I give it the SCOTT/TIGER combo, but when it tries to start up the database, it asks for another password, which I can't figurew out.<HR></BLOCKQUOTE>
Fixed the problem yesterday.
null

Sql plus not accepting user id and password as scott, tiger resp

Hi, this is mihir shah
I have just installed oracle9i
And I have a problem in opening the sql plus. It asks for user id and pass but when entered scott, tiger it always gives a tns error.
Could you tell me how to make a database & how to log on & how to make a new user id and password

It seem that you have problem with network connectivity to you database.
Check the listener status and the configuration of the files: tnsnames.ora & listener.ora
In all cases you must specified the error.
Bye, Aron

SQL*Plus Not Responding

I have a query in 8i that sums the pages entered into a database by month as follows:
SELECT DISTINCT c.study
, DECODE(r.pass_one_by, NULL, SUBSTR(s.entered_by, 5), SUBSTR(r.pass_one_by, 5)) p1_by
,SUM(DECODE(TO_CHAR(TRUNC(r.pass_one_ts),'MON'),'JAN',1,NULL,DECODE(TO_CHAR(TRUNC(s.received_dci_entry_ts),'MON'),'JAN',1),0)) JAN
,SUM(DECODE(TO_CHAR(TRUNC(r.pass_one_ts),'MON'),'FEB',1,NULL,DECODE(TO_CHAR(TRUNC(s.received_dci_entry_ts),'MON'),'FEB',1),0)) FEB
--- etc
FROM received_dcms r, received_dcis s, clinical_studies c
WHERE r.clinical_study_id = s.clinical_study_id
AND s.clinical_study_id = c.clinical_study_id
AND r.document_number = s.document_number
---other obvious joins
I need the received_dcis table to capture information for blank pages, but this table is heavily used (updated) and the report hangs when it's included. In fact, the Windows Task Manager say that SQL*Plus is "Not Responding". Is there any way around this?
Thanks,
Dane

Hi!
Quite possible SQL*Plus is working fine, but the problem is with the query itself. When running the report check v$session, v$sql & v$sess_io views. If v$sess_io reports changing consistent_gets & physical_reads, then your query is reading data. Check explain plan, run tkprof, etc. and make sure that query is properly tuned and used best execution plan possible.
Regards,
Andrew Velitchko
BrainBench MVP for Developer/2000
http://www.brainbench.com

SQL* Plus not compatible with Suse Linux 10

hi! i am using suse linux 10 and since i lost my sys/ system password i need to restore it using " / as sysdba " to login, but the problem is when i tried to install the sql* plus it says that "it does not support my platform", is there another way i can reset back my system password with out sql* plus? or can anyone guide me in the installation of sql* plus instant client? thanks a lot! :-)

i'm sorry for the confusion. i tried to install sql* plus but running the script to install it gave me an error that "it does not support my platform, it only supports red hat, suse 9.... etc." my os is suse linux 10 (oss) and am using oracle xe... so meaning i just wanted to install sql* plus to have a command-line utility to use " / as sysdba " to reset my sys/ system password. because i can't remember my sys/ system password that's why i can't get in to http://localhost:8080/apex site to change my oracle db. thanks for the reply!

Admin password works within admin account, not in standard/managed account

My admin username and password work within my admin account but when I try to use them to override changes in my wife's or my daughter's standard / managed accounts it does not work. If I want to allow the application firewall or to change parental controls there is a request for an admin password. I know that the username and password are correct and the account has not been made a standard account by upgrading. I have read the other threads about the problems found by some users in 10.5 but this is different as it is definitely still an admin account, it just seems as if it not recognised as such outside the admin account itself.
Hope my description of this makes sense to someone. Any help would be appreciated.

Are your wife's or daughter's accounts using keyboard layouts that might be remapping some of the characters to a different key? Are any of these characters in the admin password?
Also, you should be using the "short" user name of the admin account when authenticating. Normally the short user name has no capital letters in it. Check the short user name in System Preferences -> Accounts.
Suggestion: Create a fourth account, make it an admin account, and then remove admin rights from your own user account. Unnecessarily running all the time as admin is bad security practice. Apple recommends only logging in to the admin account to do admin tasks, and doing all of your day-to-day work in a non-admin account.

TSQL working in 2008 but not in SQL Server 2014

Hello,
We recently have been asked to move from SQL Server 2008 to SQL Server 2014. We are trying to run parallel tests and one of our queries that was working perfectly in 2008 is not working in 2014.
One of the filter on the our query(from 2008) is we convert a varchar field to date and compare it to anotehr calulated filed ("convert(date,Quick_Data_Start_Date) <= convert(date,(Year_ID_to_Use + '-' + Month_ID_to_Use + '-01'))").
This worked fine in 2008 but when i try to do similar operation in 2014 it returns no result.
For testing purposes, instead of converting the field to date format, i manully converted the actual value i.e. instead of using "convert(date,Quick_Data_Start_Date)" when i use "convert(date,'8/1/2014')" the code works fine.
The field "Quick_Data_Start_Date" comes from a pivot query.
When i create a temporary table for the pivot query and use the temporary table in my code and then convert the field on fly the code works fine again.
Seems like the T sql is not able to convert the field from varchar to date on the fly when coming from a different query. We have tried changing the compatbility level to 100 as well and it still would not work.
Any suggestions and comments will be really helpful. Thanks.
Regards,
GM

Hello, here is my overall review:
The query is not optimized … agreed! But that’s not the issue.
There are a number of indexes that could be created, a number of minor calculations or evaluation criteria that could be improved to make the query more efficient … again – AGREED.
The query “as is” runs in just under a minute (on SQL 2008 machine with less memory and slower hard drives). Adding the indexes would take more time to add than they would save.
NONE of that should make the query NOT WORK. These deficiencies might make it run more slowly, but should not cause the query to return no results.
“order by” shouldn’t make any difference because the query plan isn’t assuming or using any special order
The main table (~10 M rows) is using a clustered index scan (not efficient, but not the point)
The Time dimension table is using a non-clustered index seek (so the index is sorted but the data in the table is NOT physically sorted that way)
The pivot subquery is using clustered index scan (it’s only 6 rows, so who cares)
Once again, the order by might make it less efficient, but shouldn’t make it fail. We get no errors or warnings – it just returns no rows.
Because the query DOES return results when we
Either dump the Pivot query result into a #temp table(single row) and use the #temp table instead of the pivot query in the big SQL or
The “input” tables are limited to X rows but DOES NOT when the inputs have more rows
This strongly suggests a memory issue.
The server has 64 GB of RAM, but this probably isn’t enough to hold millions of rows and calculations.
Can we turn on some traces to see what’s happening to the data in the query? How and what are we looking for?
Once the memory capacity is exceeded, SQL should be pushing these results to a temporary table (either in the local database or the tempdb). Can we test to see if that is happening?
How?
Is there a permissions issue?
I have successfully done large copies outside of SQL (copied 300+ GB file from one location to another) that had to use the disk instead of just memory … means the disk write operation
isn’t restricted from my user account.
I can also confirm that the account that runs the SQL Service (“Network Service” account) has full permissions to the drives and paths where the mdf and ldf files are stored (including
master and temp).
If this doesn’t work, our upgrade is basically frozen and cannot proceed. I’m really out of ideas … anything?

SQL*plus not executing query

Hello,
I am new to sqlplus and I am trying to get some queries running off of an ARCH linux box that I have.
The install went ok and I can get sqlplus running and connect to my oracle DB. However when I enter something as easy as "select * from REASON" hit enter, all i get is a "2" on the next line
(screenshot http://imgur.com/KvTyD.jpg)
Is this a config issue on my sqlplus or am i Just not qualified. Any help is appreciated. thanks

>
I am new to sqlplus and I am trying to get some queries running off of an ARCH linux box that I have.
The install went ok and I can get sqlplus running and connect to my oracle DB. However when I enter something as easy as "select * from REASON" hit enter, all i get is a "2" on the next line
(screenshot http://imgur.com/KvTyD.jpg)
Is this a config issue on my sqlplus or am i Just not qualified. Any help is appreciated. thanks
>
SQL*Plus is expecting input from you; you terminate the statement by putting a forward slash or semi-colon just after your statement.
select * from REASON
/OR
select * from REASON;Regards,
Phiri

Username password works in SQL Plus not in SQL Developer

Similar Messages

Maybe you are looking for