Username with privilege level 15 bypass enable
Hi experts,
I guess I never really understand the authentication process on Cisco routers and devices lol. Anyway I want users with privilege level 15 to be put in the enable mode right away after login without having to type in "enable" command and enable password. Users with other privilege levels will still be put in the EXEC mode.
AAA has to be enabled because I'm using it for 802.1x as well.
The privilege level eventually will be assigned by Radius server but right now the user is created locally on the switch. Right now I have:
aaa new-model
username admin privilege 15 secret 5 $1$2bdl$VIp53G4/zpo4f9aHh.t5v0
username cisco secret 5 $1$NGdD$ehTUzwappJFMxgA7tM/YW.
line vty 0 5
access-class 100 in
exec-timeout 30 0
logging synchronous
transport input ssh
And it's not working lol. No matter I log in with "admin" or "cisco" I'm put in EXEC mode... What do I have to do to achieve this?
Thanks!
Hi,
The with default keyword authorization will get applied on all the lines i.e. CONSOLE, VTY, AUX.
In case you want it for users who are trying to login to via ssh or telnet use the following:
EXEC AUTHORIZATION
Router
router(config)#aaa authorization exec TEL GRoup radius local
router(config)#line vty 0 15
router(config-line)#authorization exec TEL
ACS
Interface configuration
Check user & group for cisco av-pair.
User setup à cisco ios/pix 6.x radius attributes àcisco av-pair [ shell:priv-lvl=15]
OR
Group setup à ios/pix 6.x radius attributes à shell:priv-lvl=15
In case of radius if exec authorization is enabled and if have not specified any privilege level in the ACS server. Then user will fall under the privilege level 1 and if enable authentication is enabled or enable password is defined on the router then we can go to enable mode by typing en or en
Regards,
Anisha
P.S.: please mark this thread as resolved if you think your query is answered.
Similar Messages
-
AAA Local with Privilege Levels
The goal....
1. local usernames on a router to control access
2. Use privilege levels in the username command to reflect what a user is allowed to do
3. Define a set of commands available to users with privilege level 1
My trouble here is that I cannot seem to find this exact combination of commands for what I want to do on CCO or Google. I have tried several combinations and here is what I have so far, but its not working.
aaa new-model
aaa authentication login default local
aaa authorization commands 1 default local
username engineer priv 15 pass XXXX
username tech priv 1 pass XXXX
privilege exec level 1 traceroute
â¨privilege exec level 1 pingHi,
This link answers your question.
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml
aaa authori command is not reqd.
Regards,
~JG
Do rate helpful posts -
Not able to login with privilege levels
Hi,
i have created privilege levels in cisco switch especially level 7 if i login with that username and password ,after typing privilege mode password it is going to level 15.... what is the problem ........
commnads i configured is :
# username cisco level 7 password cisco
#enable secret cisco
............please help me where i have gone wrongHi, What model/IOS version that you use?
Rating useful replies is more useful than saying "Thank you" -
Search itens with item level security enabled
Hi,
I have a page that "item level security" enabled.
I am doing a select to get itens...
How can I get only itens that current user have view permission?
select wv.title,
wvt.numbervalue,
wv.description,
'/pls/portal/url/ITEM/'||wv.guid link
from portal.wwv_things wv,
portal.wwv_thingattributes wvt
where wv.siteid = 271
and wv.itemtype = 'basefile'
and wv.subtype = 498194
and wv.active = 1
and wv.language = 'us'
and wv.id = wvt.masterthingid
and wv.siteid = wvt.siteid
and wvt.attributeid = 1354
and wvt.attribute_siteid = 0
and wvt.valuetype = 'number'
order by wv.title;I found the view. Thanks
portal.WWSBR_ALL_ITEMS -
Create users radius with privilege levels
hello
i have a question.. i want to build a test network with some switches and routers
but i want to be able to control the users..
and with control i mean, don't let them to be able to delete the flash: or to delete some nat translations.
is there a way to do this? and i going to use of a windows server 2008 R2 with radius
thanks allotHi,
This link answers your question.
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml
aaa authori command is not reqd.
Regards,
~JG
Do rate helpful posts -
ACS with RSA for privilege level 'enable' authentication
Has anyone experienced problems with privilege level "Enable" password authentication via ACS using RSA two factor authentication? We have recently deployed ACS and use RSA two factor authentication for the telnet connection without any problems. When configuring the networking device and ACS to use RSA for the privelledge level authentication "enable" this fails. We get prompted to enter the token code and the RSA server indicates that authentication is succesful however the network device (ASA or switch) seems to reject it.
Are there any tricks to this?
Thanks in advance!David
Like Collin the first thing that I think of is that you can not use the same token code to authenticate enable mode that was used to authenticate user mode. Beyond that I am not aware of things that should prevent this working. Are you sure that the ACS authentication server is configured to allow that user access to privilege mode?
Perhaps it would be helpful if you would post the config (especially all the aaa related parts) of a device that is having that problem. And it might help find the issue if you would run debug for authentication, try to login to enable mode, and post the output.
HTH
Rick -
Hi,
I have defined on the RADIUS server a profile with privilege level 0 with the
"shell:priv-lvl=0" command on the server. The problem is that when
the user logs into the firewall it is always given privilege level 1 (if SSH)
or 15 (if ASDM).
The AAA configuration on the firewall is the following:
aaa-server RADIUS protocol radius
aaa-server RADIUS (outside) host x.x.x.x
retry-interval 1
key *
authentication-port 8812
accounting-port 8813
aaa authentication http console RADIUS LOCAL
aaa authentication ssh console RADIUS LOCAL
aaa authentication enable console RADIUS LOCAL
Can you tell me what I need to do to authenticate using RADIUS, but assigning
the correct privilege levels?
I have been refered to bug ID CSCsh17346, but although i've updated the image to 7.2.2.22 it still does not work.
Thanks in advance.
(in attachment is the output of the radius debug).Hi Paulo,
What I think is, you are looking for something like this,
Limiting User CLI and ASDM Access with Management Authorization:
http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_80/conf_gd/sysadmin/mgaccess.htm#wp1070306
Go through what setting with what protocol, will give you what level of access. This might help.
And what you originally looking for is, might be related to this,
Configuring Command Authorization
http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_80/conf_gd/sysadmin/mgaccess.htm#wp1042034
Go through complete heading, but to be specific interesting part is "Configuring Local Command Authorization"
Above links worth a read.
This might help.
Regards,
Prem -
What privilege level is required...
We are looking to possibly delegate setting up AnyConnect to our Helpdesk (limited to ASDM, adding Apple UDIDs to a Access Policy.) The question I have is what privilege level should be assigned that will allow them to add the UDID and limit (as much as possible) other changes?
You will need to define local command authorization at custom privilege level at a level between 1-15 and assign the necessary commands to it (e.g Access-list, Configure, cmd in your example). Then assign your Helpdesk usernames that privilege level.
I don't believe you can restrict which access-lists they can edit - that's outside the scope of what you can do with ASDM (or the cli). you'd have to move to CSM or an external portal with more role-based access control tools built-in to get that granular.
See this section of the ASDM Configuration Guide for details. -
Filtering in Privilege level !!
Hi all. I am not using AAA. Just using privilege command to move commands between levels. now my question is simple. I want to assign level 2 to my user admin. And he can ONLY run sh interfaces. No other command ( this includes the default set of command coming with privilege level 2) shouldnt be allowed. The user can only run sh interfaces and thats it. Kindly tell me how to do it
1) without AAA, using privilege commands
2) with AAA using local authorization.
Thanks in advance, kindly guide meThis link should work for both.
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_cfg_sec_4cli_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1184620
Hope that helps. -
Unable to connect on WLSE with account level 15
Hi,
All user configured on WLSE are configured with privilege level 0.
When I try to connect on WLSE via Telnet I just can do a ping, traceroute,debug or a show command.
Via Http : Admin->User Admin->Manage User
I can just set CLI Access to none or Level 0.
Role of my user is set to "System admin"
Is it possible to change Level privilege to 15 or to create a new user with level privilege 15 ?
For your information version of WLSE is WLSE-2.11FCS.
Thanks for your comment.Thanks for your reply rmushtaq,
In fact, my problem is that the user admin don't have privilege level 15. He's configured with privilege level 0.
And when I want to create a new user, I can't set privilege level 15.
When I try to do a telnet with the user "admin" on WLSE I can't use all CLI commands. I just can use show, ping and traceroute. -
Enabling Privilege Levels when ACS is Down
Hi,
I have a requirement to fall back to local accounts when ACS is down. These accounts will have specific privilege levels. I have two local users - adminro and adminrw.
adminro is read only and will have a privilege level of 7.
adminrw is a full access account with a priv level of 15.
I can login with adminro when ACS is down, but when I attempt to enable using "enable 7" I receive the following ouput:
PPD-ELPUF5/pri/act> en 7
Enabling to privilege levels is not allowed when configured for
AAA authentication. Use 'enable' only.
If I login using "enable", my read only account now has full configuration access which is not desireable.
My AAA configuration is as follows:
aaa authentication ssh console ADMIN LOCAL
aaa authentication enable console ADMIN LOCAL
aaa authentication http console ADMIN LOCAL
aaa authentication telnet console ADMIN LOCAL
aaa authentication serial console ADMIN LOCAL
aaa authorization command ADMIN LOCAL
aaa accounting ssh console ADMIN
aaa accounting command privilege 15 ADMIN
aaa accounting enable console ADMIN
aaa accounting serial console ADMIN
aaa accounting telnet console ADMIN
aaa authorization exec authentication-server
username adminro password <REMOVED> encrypted privilege 7
username adminrw password <REMOVED> encrypted privilege 15
enable password <REMOVED> level 7 encrypted
enable password <REMOVED> encrypted
Is there anyway to enable the user or automatically elevate the user to privilege 7 post login like you can with a router? I cannot have the adminro account to be able to run configuration commands on the device. Running ASA version 8.2(3).
Thanks!PPD-ELPUF5/pri/act# sh curpriv
Username : adminro
Current privilege level : 7
Current Mode/s : P_PRIV
Server Group: ADMIN
Server Protocol: tacacs+
Server Address: 1.150.1.80
Server port: 49
Server status: FAILED, Server disabled at 15:02:37 EDT Wed Oct 12 2011
Number of pending requests 0
Average round trip time 2ms
Number of authentication requests 38
Number of authorization requests 373
Number of accounting requests 149
Number of retransmissions 0
Number of accepts 307
Number of rejects 19
Number of challenges 0
Number of malformed responses 0
Number of bad authenticators 0
Number of timeouts 234
Number of unrecognized responses 0
PPD-ELPUF5/pri/act(config)# name 1.1.1.1 TEST description TEST CHANGE
PPD-ELPUF5/pri/act(config)# sh run name
name 1.1.1.1 TEST description TEST CHANGE
As you can see above, my user was able to perform a change even though it should not be allowed.
PPD-ELPUF5/pri/act(config)# sh run privilege
privilege cmd level 7 mode exec command show
privilege cmd level 7 mode exec command ping
privilege cmd level 7 mode exec command traceroute -
User privilege level for configuration backup with PI 1.2
We have more than 50 devices handling by PI 1.2 (testing) I like to know how to do configuration archiving with user who doesn't have write privilege.
I tried like this.
username john privilege 6 password cisco
privilege exec level 6 show running-config
(result) show run --> blank
I tried this user with one of switch in PI 1.2. It did not do configuration backup
username inout password inout
username inout privilege 15 autocommand show running-config
(result) once logged in, it automatically showed running-config. However when I tried with PI 1.2 with this user (inout). I couldn't do configuration back.
reference
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml
so, my question is this. what is the solution for me to create certain user with read-only privilege while PI 1.2 is able to do configuration archiving ?
thanks in advance7.4 MSE code will in fact require an update of Prime 1.2 to 1.3.0.20-
It's pretty easy though and your licenses will still work from the Prime Infra side.
Here's a link to upgrade PI to 1.3
http://www.cisco.com/en/US/partner/docs/net_mgmt/prime/infrastructure/1.3/release/notes/cpi_rn_13.html#wp73605
I personally would go ahead with the upgrade of both::: -
Trying to get t my email, this comes up: We are sorry, but you will need to enable cookies and Javascript to use your Username with this site.
How do I do this?
George Szanto<br />
[email protected]see similar question answered at https://support.mozilla.com/questions/836913
To be notified of updates to a question whether it is your problem or not simply click on the "Get email notifications" and follow directed choice. Only the original poster can mark as solved, so there should be a slight difference in choice as an original poster and where you latch onto another question. The notifications only apply to the specific question where entered. -
Enable mode using privilege levels
Hi All,
We use TACACS+ for telnet access and enable secret password for privileged access. An user would like to enter the enable mode without entering the enable secret password. Is it possible to do this using privilege levels and shell exec on the AAA server?I have configured a user on AAA server and under the enable options, I have selected level 15 and under shell exec, I have selected privilege level 15.
The router has following config
aaa authorization exec default tacacs+ if-authenticated
aaa authorization commands 1 default tacacs+ if-authenticated
aaa authorization commands 15 default tacacs+ if-authenticated
Am I missing any other commands? -
Enable aaa accounting commands for all privilege levels?
Here is the command's syntax:
aaa accounting {auth-proxy | system | network | exec | connection | commands level} {default | list-name} {start-stop | stop-only | none} [broadcast] group groupname
The "command" accounting type must include the privilege level of the commands you are logging. How do I log ALL commands?
Take the following example:
aaa accounting commands 15 default start-stop group mygroup
If I issue this command will that mean commands the user executes that have a privilege level lower than 15 will not be logged? Or only commands that require exactly privilege level 15 will be logged?
How can I log all commands regardless of privilege level?Hi Red,
If you customize the command privilege level using the privilege command, you can limit which commands the appliance accounts for by specifying a minimum privilege level. The security appliance does not account for commands that are below the minimum privilege level.
The default privilege level is 0. So if you don't specify any privilege level then all should be accounted for.
You can find the command detail at. This is for ASA though.
http://www.cisco.com/c/en/us/td/docs/security/asa/asa80/command/reference/cmd_ref/a1.html#wp1535253
Regards,
Kanwal
Note: Please mark answers if they are helpful.
Maybe you are looking for
-
Question about installing logic 9 upgrade on new computer
Hello! I just purchased a new mac pro (woo hoo... finally) and the logic 9 upgrade pack. I own Logic 8 but I'm not sure if I should install it before installing the logic 9 upgrade. Will I miss out on any parts of the logic 8 sound library, loops, ef
-
Anyone gone from a 12" iBook to MacBook, is it too wide (big)
Hi, I love my small 12" iBook G4 and was wondering with the extra width does it make it too big. If someone has picture of both side by side, that would be great. Does any one have pictures of the power supply next to an old one
-
I bought a 800 to 400 firewire adaptor and connected it to the macbook pro while it is switched on and the macbook pro switched off itself.... But it works fine when I connect the adaptor before switching on the macbook pro I want to know what's the
-
Solution Manager Basic Setting, Get SAP Component fail
Dear All When I execute Solution Manager initial configuration wizard on step: Initial configuration part II, it comes out an error: Fetch SAP Component fail. Can anyone tell me what's the problem, thanks. Steps for Reconstruction 1) SPRO => Basi
-
Hi, Can anyone suggest, how can we pass Long[] as I/P arguments request to BPM process through PAPI-WS using SOAP-UI. Thanks, Abhishek