Using a 74HC74N to create a the display for the hours in a 12 hour clock
Hello all,
I have been working on implementing a digital clock in Multisim and am nearly complete. I am currently having trouble making the hundredths count from 0-9 and then 0-2 and then resetting after 2. For the hundredths place I am using a 74HC161N counter while for the tenths place I have decided to use a D flip flop (74HC74N) which I am having trouble implementing as well. I have attached the file that I am working with, any help would be great.
Attachments:
Hours.ms11 169 KB
Hi,
Out of curiosity, this is not an issue you have with Multisim, but the implementation of flip flops correct? There is a lot of forums that are made to help you with this kind of stuff (Some physics, electronics, and cirucitry forums) if you search around the web.
Kind regards,
Miguel V
National Instruments
Similar Messages
-
I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.
Hi there,
The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
AJ -
Can I use my iMac (20" G5) as a display for the MacBook Pro 13"?
Can I connect an iMac(20" G5) as a display for the MacBook Pro 13"? If yes, what adapters I need? Does it need modification or software for the iMac?
You need to use ScreenRecycler or a VNC client.
(49933) -
Am having problems with display hovering in open tabs. I used Full screen last night when browsing for first time and since then when I go back to normal view the window shakes up and down about 1/4 inch and have to go to full screen for steady view. The toolbars are all steady it is only the web page.
== This happened ==
Every time Firefox opened
== Last night after using full screen.Do you have any saved bookmarks on the Bookmarks Toolbar, or that that Toolbar empty and you have it being displayed??
Try opening View > Toolbars and click on the Bookmark Toolbar item to remove the check-mark, and then see how that affects that "jumping" or vertical oscillation of the UI.
If that doesn't solve your problem, you can try the Firefox SafeMode and verify that problem doesn't exist in that troubleshooting mode.
[http://support.mozilla.com/en-US/kb/Safe+Mode]
If it is gone in SafeMode, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
I have created an iBook of a course for my students. I want it to be a work book. Can I do this in iBook Author? Students need to be able to answer questions in the text boxes inbedded in the file.
Any assistance would be greatly appreciated.
ThanksiBooks Author has what are called 'review' widgets, which specifically support Q & A.
If you want a 'lab' type experience, you may be better suited with an app instead. -
it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?
You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be. -
Change the display of the multiple Table items using a single Drop-down
I have created a Web Template in BEx WAD (BW 3.5) with 4 Tables assigned to 4 dfferent Queries. Now I want to change the display of the all the Four Tables based on the selection of display properties chosen in a single Dropdown item. The properties to be selected in the dropdown are like changing the Alternate style display of Rows, Suppress Alternate Style, Display only 30 Rows or 60 Rows.
Please help me in writing the script necessary to pass the command from the dropdown to all the Tables to get the desired output.
Thanks,
Krishna
Edited by: Hari Krishna Velampalli on Oct 26, 2008 12:00 AMDipika, Thanks for the response.
I tried using that option but again since we cannot give custom options in a drop-down,
I created a Form with a drop-down list of options like Suppress Result Rows, Suppress alternate style of rows, Display only 30 Rows, Display only 100 rows .. and so on.
Now I am able to change the display of my first table by selecting the options in the drop-down list. But my intention is to apply that selection to Multiple Tables.
How can I achieve that?
HK -
Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe. I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar. How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!! I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
Thanks in advance.
ColinWelcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT -
I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?
Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.
-
Using a iMac as display for the Powerbook?
Can an iMAC computer be used as a display for the Powerbook laptop? Could I use the iMac keyboard plugged into the Powerbook and maybe the iMac mouse as well?
Does ScreenRecycler do what you want?
(43378) -
I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?
I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.
-
Can anyone tell me if there is any difference at all in the display between the 4 and 4s. It appears they are the same from the specs but I dont want to make an expensive mistake. I can use the 4 with no problems but the 5 makes me feel ill and I am hoping I can upgrade to a 4s with no issues. Any help appreciated.
In a technical sense, the differences between the displays on the iPhone 4 vs 4s are vast. I'm mean, they are both attached to 70 - 90% of the internal components and far from interchangeable. There are no differences however, that are noticeable by the user.
-
Is it possible to use an iMac as the display for a Mac mini?
Is it possible to use an iMac as the display for a Mac mini?
iMacs late 2009 or newer can be used in Target display
mode. Any older, no can do.
The only other way is via network Screen Sharing or
some otherVPN network like solution. The issue here
though is that video performance will be pretty severely
hampered. -
I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?
No. Target Display mode is only supported when connected to a Mac running 10.6 or later.
It cannot be used with a PC, bootcamp, gamaing console, cable box, DVR or PowerPC Mac.
http://support.apple.com/kb/ht3924 -
Can I use the display from the iphone or rotate so that I can use the tv in portrait orientation with a app or appleTV? or rotate the display of the tv?
The landscape and portrait mode when AirPlaying your iPhone to the Apple TV will depend on the app you are in on the iPhone.
For example, the home screen on your iPhone is in portrait mode even if you rotate the phone, so if you are AirPlay mirroring this, it will show in portrait mode on the TV. If you have photos taken in landscape mode and rotate your phone or watch a video in landscape mode, then the video should appear in landscape mode on the TV.
If things that should be in landscape mode are not in landscape mode, you might have the orientation lock turned on. You can turn it off or on using the steps in this link: http://www.cultofmac.com/142535/how-to-enable-orientation-lock-on-your-ios-devic es-ios-tip/
I hope this helps!
Maybe you are looking for
-
FF805 Error tax statement item missing for tax code
I am getting the above error when am trying to release an invoice to accounting in VF02. We are using a pricing procedure that contains US tax conditions and Europe tax conditions and the European condition has got determined according to the access
-
How To use pen tool in adobe photoshop cs6
I want to know about pen tool in adobe photoshop cs6. Just tring to create an attractive design and merge my photo with other photo . Please help me to provide best answer . [spam link removed]
-
Easy Way to Play Clips in Sequence?
Noob question: Is there an easy way to play my clips in sequence without dragging each into the timeline? When I log and capture, FCP7 creates a separate clip each time I restart recording. Can I look at each clip one after the other without double
-
Running Fedora core 6 the Satego P100-10U becomes very hot
Hi all, I run Fedora Core 6 on my Satego P100-10U Notebook. But there is a problem using NVIDIA-Driver. After few seconds running Fedora the notebook becomes very hot. The NVIDIA sensors show me a core temperature about 100-112 Degrees. Is there a so
-
Migrating email-enabled public folders corrupted
We migrated our public folders from EX 2010 to 2013 but currently face 2 issues with the import: a. All public folders/subfolders became email disabled - about 300 + folders b. More importantly there is a mismatch between folder name and assigned sm